From 934183e35a677ad8fe9e2be3d3ae7b538ad85464 Mon Sep 17 00:00:00 2001 From: Robert Bradford Date: Fri, 22 Feb 2008 12:20:40 +0000 Subject: Add em-x270 instructions. git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3854 311d38ba-8fff-0310-9ca6-ca027cbcb966 --- README.hardware | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'README.hardware') diff --git a/README.hardware b/README.hardware index 932d6530ac..24b137f4be 100644 --- a/README.hardware +++ b/README.hardware @@ -44,7 +44,7 @@ The following consumer devices are supported by Poky: For more information see board's section below. The Poky MACHINE setting corresponding to the board is given in brackets. - + Poky Boot CD (bootcdx86) ======================== @@ -119,7 +119,16 @@ IMAGE_FSTYPES=cpio.gz MACHINE=cm-x270 POKYLIBC=uclibc bitbake poky-image-minimal Compulab EM-X270 (em-x270) ========================== -FIXME +Fetch the "Linux - kernel and run-time image (Angstrom)" ZIP file from the +Compulab website. Inside the images directory of this ZIP file is another ZIP +file called 'LiveDisk.zip'. Extract this over a cleanly formatted vfat USB flash +drive. Replace the 'em_x270.img' file with the 'updater-em-x270.ext2' file. + +Insert this USB disk into the supplied adapter and connect this to the +board. Whilst holding down the the suspend button press the reset button. The +board will now boot off the USB key and into a version of Angstrom. On the +desktop is an icon labelled "Updater". Run this program to launch the updater +that will flash the Poky kernel and rootfs to the board. FreeScale iMX31ADS (mx31ads) -- cgit 1.2.3-korg