From 147d66495622332fdbf3cb1d0c3f0948402e1d1b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 5 Jun 2019 21:41:16 +0300 Subject: openssl: Upgrade 1.1.1b -> 1.1.1c Backported patch removed. Signed-off-by: Adrian Bunk Signed-off-by: Richard Purdie --- .../openssl/openssl/CVE-2019-1543.patch | 69 ------- .../openssl/openssl/afalg.patch | 6 +- .../recipes-connectivity/openssl/openssl_1.1.1b.bb | 202 --------------------- .../recipes-connectivity/openssl/openssl_1.1.1c.bb | 201 ++++++++++++++++++++ 4 files changed, 204 insertions(+), 274 deletions(-) delete mode 100644 meta/recipes-connectivity/openssl/openssl/CVE-2019-1543.patch delete mode 100644 meta/recipes-connectivity/openssl/openssl_1.1.1b.bb create mode 100644 meta/recipes-connectivity/openssl/openssl_1.1.1c.bb diff --git a/meta/recipes-connectivity/openssl/openssl/CVE-2019-1543.patch b/meta/recipes-connectivity/openssl/openssl/CVE-2019-1543.patch deleted file mode 100644 index 900ef97fce..0000000000 --- a/meta/recipes-connectivity/openssl/openssl/CVE-2019-1543.patch +++ /dev/null @@ -1,69 +0,0 @@ -Upstream-Status: Backport [https://github.com/openssl/openssl/commit/f426625b6ae9a7831010750490a5f0ad689c5ba3] -Signed-off-by: Ross Burton - -From f426625b6ae9a7831010750490a5f0ad689c5ba3 Mon Sep 17 00:00:00 2001 -From: Matt Caswell -Date: Tue, 5 Mar 2019 14:39:15 +0000 -Subject: [PATCH] Prevent over long nonces in ChaCha20-Poly1305 - -ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for -every encryption operation. RFC 7539 specifies that the nonce value (IV) -should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and -front pads the nonce with 0 bytes if it is less than 12 bytes. However it -also incorrectly allows a nonce to be set of up to 16 bytes. In this case -only the last 12 bytes are significant and any additional leading bytes are -ignored. - -It is a requirement of using this cipher that nonce values are unique. -Messages encrypted using a reused nonce value are susceptible to serious -confidentiality and integrity attacks. If an application changes the -default nonce length to be longer than 12 bytes and then makes a change to -the leading bytes of the nonce expecting the new value to be a new unique -nonce then such an application could inadvertently encrypt messages with a -reused nonce. - -Additionally the ignored bytes in a long nonce are not covered by the -integrity guarantee of this cipher. Any application that relies on the -integrity of these ignored leading bytes of a long nonce may be further -affected. - -Any OpenSSL internal use of this cipher, including in SSL/TLS, is safe -because no such use sets such a long nonce value. However user -applications that use this cipher directly and set a non-default nonce -length to be longer than 12 bytes may be vulnerable. - -CVE: CVE-2019-1543 - -Fixes #8345 - -Reviewed-by: Paul Dale -Reviewed-by: Richard Levitte -(Merged from https://github.com/openssl/openssl/pull/8406) - -(cherry picked from commit 2a3d0ee9d59156c48973592331404471aca886d6) ---- - crypto/evp/e_chacha20_poly1305.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/crypto/evp/e_chacha20_poly1305.c b/crypto/evp/e_chacha20_poly1305.c -index c1917bb86a6..d3e2c622a1b 100644 ---- a/crypto/evp/e_chacha20_poly1305.c -+++ b/crypto/evp/e_chacha20_poly1305.c -@@ -30,6 +30,8 @@ typedef struct { - - #define data(ctx) ((EVP_CHACHA_KEY *)(ctx)->cipher_data) - -+#define CHACHA20_POLY1305_MAX_IVLEN 12 -+ - static int chacha_init_key(EVP_CIPHER_CTX *ctx, - const unsigned char user_key[CHACHA_KEY_SIZE], - const unsigned char iv[CHACHA_CTR_SIZE], int enc) -@@ -533,7 +535,7 @@ static int chacha20_poly1305_ctrl(EVP_CIPHER_CTX *ctx, int type, int arg, - return 1; - - case EVP_CTRL_AEAD_SET_IVLEN: -- if (arg <= 0 || arg > CHACHA_CTR_SIZE) -+ if (arg <= 0 || arg > CHACHA20_POLY1305_MAX_IVLEN) - return 0; - actx->nonce_len = arg; - return 1; diff --git a/meta/recipes-connectivity/openssl/openssl/afalg.patch b/meta/recipes-connectivity/openssl/openssl/afalg.patch index 7c4b084f3d..b7c0e9697f 100644 --- a/meta/recipes-connectivity/openssl/openssl/afalg.patch +++ b/meta/recipes-connectivity/openssl/openssl/afalg.patch @@ -18,14 +18,14 @@ index 3baa8ce..9ef52ed 100755 - ($mi2) = $mi2 =~ /(\d+)/; - my $ver = $ma*10000 + $mi1*100 + $mi2; - if ($ver < $minver) { -- $disabled{afalgeng} = "too-old-kernel"; +- disable('too-old-kernel', 'afalgeng'); - } else { - push @{$config{engdirs}}, "afalg"; - } - } else { -- $disabled{afalgeng} = "cross-compiling"; +- disable('cross-compiling', 'afalgeng'); - } + push @{$config{engdirs}}, "afalg"; } else { - $disabled{afalgeng} = "not-linux"; + disable('not-linux', 'afalgeng'); } diff --git a/meta/recipes-connectivity/openssl/openssl_1.1.1b.bb b/meta/recipes-connectivity/openssl/openssl_1.1.1b.bb deleted file mode 100644 index 8bb3a309a2..0000000000 --- a/meta/recipes-connectivity/openssl/openssl_1.1.1b.bb +++ /dev/null @@ -1,202 +0,0 @@ -SUMMARY = "Secure Socket Layer" -DESCRIPTION = "Secure Socket Layer (SSL) binary and related cryptographic tools." -HOMEPAGE = "http://www.openssl.org/" -BUGTRACKER = "http://www.openssl.org/news/vulnerabilities.html" -SECTION = "libs/network" - -# "openssl" here actually means both OpenSSL and SSLeay licenses apply -# (see meta/files/common-licenses/OpenSSL to which "openssl" is SPDXLICENSEMAPped) -LICENSE = "openssl" -LIC_FILES_CHKSUM = "file://LICENSE;md5=d343e62fc9c833710bbbed25f27364c8" - -DEPENDS = "hostperl-runtime-native" - -SRC_URI = "http://www.openssl.org/source/openssl-${PV}.tar.gz \ - file://run-ptest \ - file://0001-skip-test_symbol_presence.patch \ - file://0001-buildinfo-strip-sysroot-and-debug-prefix-map-from-co.patch \ - file://afalg.patch \ - file://CVE-2019-1543.patch \ - " - -SRC_URI_append_class-nativesdk = " \ - file://environment.d-openssl.sh \ - " - -SRC_URI[md5sum] = "4532712e7bcc9414f5bce995e4e13930" -SRC_URI[sha256sum] = "5c557b023230413dfb0756f3137a13e6d726838ccd1430888ad15bfb2b43ea4b" - -inherit lib_package multilib_header ptest - -PACKAGECONFIG ?= "" -PACKAGECONFIG_class-native = "" -PACKAGECONFIG_class-nativesdk = "" - -PACKAGECONFIG[cryptodev-linux] = "enable-devcryptoeng,disable-devcryptoeng,cryptodev-linux" - -B = "${WORKDIR}/build" -do_configure[cleandirs] = "${B}" - -#| ./libcrypto.so: undefined reference to `getcontext' -#| ./libcrypto.so: undefined reference to `setcontext' -#| ./libcrypto.so: undefined reference to `makecontext' -EXTRA_OECONF_append_libc-musl = " no-async" -EXTRA_OECONF_append_libc-musl_powerpc64 = " no-asm" - -# This prevents openssl from using getrandom() which is not available on older glibc versions -# (native versions can be built with newer glibc, but then relocated onto a system with older glibc) -EXTRA_OECONF_class-native = "--with-rand-seed=devrandom" -EXTRA_OECONF_class-nativesdk = "--with-rand-seed=devrandom" - -# Relying on hardcoded built-in paths causes openssl-native to not be relocateable from sstate. -CFLAGS_append_class-native = " -DOPENSSLDIR=/not/builtin -DENGINESDIR=/not/builtin" -CFLAGS_append_class-nativesdk = " -DOPENSSLDIR=/not/builtin -DENGINESDIR=/not/builtin" - -do_configure () { - os=${HOST_OS} - case $os in - linux-gnueabi |\ - linux-gnuspe |\ - linux-musleabi |\ - linux-muslspe |\ - linux-musl ) - os=linux - ;; - *) - ;; - esac - target="$os-${HOST_ARCH}" - case $target in - linux-arm*) - target=linux-armv4 - ;; - linux-aarch64*) - target=linux-aarch64 - ;; - linux-i?86 | linux-viac3) - target=linux-x86 - ;; - linux-gnux32-x86_64 | linux-muslx32-x86_64 ) - target=linux-x32 - ;; - linux-gnu64-x86_64) - target=linux-x86_64 - ;; - linux-mips | linux-mipsel) - # specifying TARGET_CC_ARCH prevents openssl from (incorrectly) adding target architecture flags - target="linux-mips32 ${TARGET_CC_ARCH}" - ;; - linux-gnun32-mips*) - target=linux-mips64 - ;; - linux-*-mips64 | linux-mips64 | linux-*-mips64el | linux-mips64el) - target=linux64-mips64 - ;; - linux-microblaze* | linux-nios2* | linux-sh3 | linux-sh4 | linux-arc*) - target=linux-generic32 - ;; - linux-powerpc) - target=linux-ppc - ;; - linux-powerpc64) - target=linux-ppc64 - ;; - linux-riscv32) - target=linux-generic32 - ;; - linux-riscv64) - target=linux-generic64 - ;; - linux-sparc | linux-supersparc) - target=linux-sparcv9 - ;; - esac - - useprefix=${prefix} - if [ "x$useprefix" = "x" ]; then - useprefix=/ - fi - # WARNING: do not set compiler/linker flags (-I/-D etc.) in EXTRA_OECONF, as they will fully replace the - # environment variables set by bitbake. Adjust the environment variables instead. - PERL5LIB="${S}/external/perl/Text-Template-1.46/lib/" \ - perl ${S}/Configure ${EXTRA_OECONF} ${PACKAGECONFIG_CONFARGS} --prefix=$useprefix --openssldir=${libdir}/ssl-1.1 --libdir=${libdir} $target - perl ${B}/configdata.pm --dump -} - -do_install () { - oe_runmake DESTDIR="${D}" MANDIR="${mandir}" MANSUFFIX=ssl install - - oe_multilib_header openssl/opensslconf.h - - # Create SSL structure for packages such as ca-certificates which - # contain hard-coded paths to /etc/ssl. Debian does the same. - install -d ${D}${sysconfdir}/ssl - mv ${D}${libdir}/ssl-1.1/certs \ - ${D}${libdir}/ssl-1.1/private \ - ${D}${libdir}/ssl-1.1/openssl.cnf \ - ${D}${sysconfdir}/ssl/ - - # Although absolute symlinks would be OK for the target, they become - # invalid if native or nativesdk are relocated from sstate. - ln -sf ${@oe.path.relative('${libdir}/ssl-1.1', '${sysconfdir}/ssl/certs')} ${D}${libdir}/ssl-1.1/certs - ln -sf ${@oe.path.relative('${libdir}/ssl-1.1', '${sysconfdir}/ssl/private')} ${D}${libdir}/ssl-1.1/private - ln -sf ${@oe.path.relative('${libdir}/ssl-1.1', '${sysconfdir}/ssl/openssl.cnf')} ${D}${libdir}/ssl-1.1/openssl.cnf -} - -do_install_append_class-native () { - create_wrapper ${D}${bindir}/openssl \ - OPENSSL_CONF=${libdir}/ssl-1.1/openssl.cnf \ - SSL_CERT_DIR=${libdir}/ssl-1.1/certs \ - SSL_CERT_FILE=${libdir}/ssl-1.1/cert.pem \ - OPENSSL_ENGINES=${libdir}/ssl-1.1/engines -} - -do_install_append_class-nativesdk () { - mkdir -p ${D}${SDKPATHNATIVE}/environment-setup.d - install -m 644 ${WORKDIR}/environment.d-openssl.sh ${D}${SDKPATHNATIVE}/environment-setup.d/openssl.sh - sed 's|/usr/lib/ssl/|/usr/lib/ssl-1.1/|g' -i ${D}${SDKPATHNATIVE}/environment-setup.d/openssl.sh -} - -PTEST_BUILD_HOST_FILES += "configdata.pm" -PTEST_BUILD_HOST_PATTERN = "perl_version =" -do_install_ptest () { - # Prune the build tree - rm -f ${B}/fuzz/*.* ${B}/test/*.* - - cp ${S}/Configure ${B}/configdata.pm ${D}${PTEST_PATH} - cp -r ${S}/external ${B}/test ${S}/test ${B}/fuzz ${S}/util ${B}/util ${D}${PTEST_PATH} - - # For test_shlibload - ln -s ${libdir}/libcrypto.so.1.1 ${D}${PTEST_PATH}/libcrypto.so - ln -s ${libdir}/libssl.so.1.1 ${D}${PTEST_PATH}/libssl.so - - install -d ${D}${PTEST_PATH}/apps - ln -s ${bindir}/openssl ${D}${PTEST_PATH}/apps - install -m644 ${S}/apps/*.pem ${S}/apps/*.srl ${S}/apps/openssl.cnf ${D}${PTEST_PATH}/apps - install -m755 ${B}/apps/CA.pl ${D}${PTEST_PATH}/apps - - install -d ${D}${PTEST_PATH}/engines - install -m755 ${B}/engines/ossltest.so ${D}${PTEST_PATH}/engines -} - -# Add the openssl.cnf file to the openssl-conf package. Make the libcrypto -# package RRECOMMENDS on this package. This will enable the configuration -# file to be installed for both the openssl-bin package and the libcrypto -# package since the openssl-bin package depends on the libcrypto package. - -PACKAGES =+ "libcrypto libssl openssl-conf ${PN}-engines ${PN}-misc" - -FILES_libcrypto = "${libdir}/libcrypto${SOLIBS}" -FILES_libssl = "${libdir}/libssl${SOLIBS}" -FILES_openssl-conf = "${sysconfdir}/ssl/openssl.cnf" -FILES_${PN}-engines = "${libdir}/engines-1.1" -FILES_${PN}-misc = "${libdir}/ssl-1.1/misc" -FILES_${PN} =+ "${libdir}/ssl-1.1/*" -FILES_${PN}_append_class-nativesdk = " ${SDKPATHNATIVE}/environment-setup.d/openssl.sh" - -CONFFILES_openssl-conf = "${sysconfdir}/ssl/openssl.cnf" - -RRECOMMENDS_libcrypto += "openssl-conf" -RDEPENDS_${PN}-ptest += "openssl-bin perl perl-modules bash" - -BBCLASSEXTEND = "native nativesdk" diff --git a/meta/recipes-connectivity/openssl/openssl_1.1.1c.bb b/meta/recipes-connectivity/openssl/openssl_1.1.1c.bb new file mode 100644 index 0000000000..669b1a1034 --- /dev/null +++ b/meta/recipes-connectivity/openssl/openssl_1.1.1c.bb @@ -0,0 +1,201 @@ +SUMMARY = "Secure Socket Layer" +DESCRIPTION = "Secure Socket Layer (SSL) binary and related cryptographic tools." +HOMEPAGE = "http://www.openssl.org/" +BUGTRACKER = "http://www.openssl.org/news/vulnerabilities.html" +SECTION = "libs/network" + +# "openssl" here actually means both OpenSSL and SSLeay licenses apply +# (see meta/files/common-licenses/OpenSSL to which "openssl" is SPDXLICENSEMAPped) +LICENSE = "openssl" +LIC_FILES_CHKSUM = "file://LICENSE;md5=d343e62fc9c833710bbbed25f27364c8" + +DEPENDS = "hostperl-runtime-native" + +SRC_URI = "http://www.openssl.org/source/openssl-${PV}.tar.gz \ + file://run-ptest \ + file://0001-skip-test_symbol_presence.patch \ + file://0001-buildinfo-strip-sysroot-and-debug-prefix-map-from-co.patch \ + file://afalg.patch \ + " + +SRC_URI_append_class-nativesdk = " \ + file://environment.d-openssl.sh \ + " + +SRC_URI[md5sum] = "15e21da6efe8aa0e0768ffd8cd37a5f6" +SRC_URI[sha256sum] = "f6fb3079ad15076154eda9413fed42877d668e7069d9b87396d0804fdb3f4c90" + +inherit lib_package multilib_header ptest + +PACKAGECONFIG ?= "" +PACKAGECONFIG_class-native = "" +PACKAGECONFIG_class-nativesdk = "" + +PACKAGECONFIG[cryptodev-linux] = "enable-devcryptoeng,disable-devcryptoeng,cryptodev-linux" + +B = "${WORKDIR}/build" +do_configure[cleandirs] = "${B}" + +#| ./libcrypto.so: undefined reference to `getcontext' +#| ./libcrypto.so: undefined reference to `setcontext' +#| ./libcrypto.so: undefined reference to `makecontext' +EXTRA_OECONF_append_libc-musl = " no-async" +EXTRA_OECONF_append_libc-musl_powerpc64 = " no-asm" + +# This prevents openssl from using getrandom() which is not available on older glibc versions +# (native versions can be built with newer glibc, but then relocated onto a system with older glibc) +EXTRA_OECONF_class-native = "--with-rand-seed=devrandom" +EXTRA_OECONF_class-nativesdk = "--with-rand-seed=devrandom" + +# Relying on hardcoded built-in paths causes openssl-native to not be relocateable from sstate. +CFLAGS_append_class-native = " -DOPENSSLDIR=/not/builtin -DENGINESDIR=/not/builtin" +CFLAGS_append_class-nativesdk = " -DOPENSSLDIR=/not/builtin -DENGINESDIR=/not/builtin" + +do_configure () { + os=${HOST_OS} + case $os in + linux-gnueabi |\ + linux-gnuspe |\ + linux-musleabi |\ + linux-muslspe |\ + linux-musl ) + os=linux + ;; + *) + ;; + esac + target="$os-${HOST_ARCH}" + case $target in + linux-arm*) + target=linux-armv4 + ;; + linux-aarch64*) + target=linux-aarch64 + ;; + linux-i?86 | linux-viac3) + target=linux-x86 + ;; + linux-gnux32-x86_64 | linux-muslx32-x86_64 ) + target=linux-x32 + ;; + linux-gnu64-x86_64) + target=linux-x86_64 + ;; + linux-mips | linux-mipsel) + # specifying TARGET_CC_ARCH prevents openssl from (incorrectly) adding target architecture flags + target="linux-mips32 ${TARGET_CC_ARCH}" + ;; + linux-gnun32-mips*) + target=linux-mips64 + ;; + linux-*-mips64 | linux-mips64 | linux-*-mips64el | linux-mips64el) + target=linux64-mips64 + ;; + linux-microblaze* | linux-nios2* | linux-sh3 | linux-sh4 | linux-arc*) + target=linux-generic32 + ;; + linux-powerpc) + target=linux-ppc + ;; + linux-powerpc64) + target=linux-ppc64 + ;; + linux-riscv32) + target=linux-generic32 + ;; + linux-riscv64) + target=linux-generic64 + ;; + linux-sparc | linux-supersparc) + target=linux-sparcv9 + ;; + esac + + useprefix=${prefix} + if [ "x$useprefix" = "x" ]; then + useprefix=/ + fi + # WARNING: do not set compiler/linker flags (-I/-D etc.) in EXTRA_OECONF, as they will fully replace the + # environment variables set by bitbake. Adjust the environment variables instead. + PERL5LIB="${S}/external/perl/Text-Template-1.46/lib/" \ + perl ${S}/Configure ${EXTRA_OECONF} ${PACKAGECONFIG_CONFARGS} --prefix=$useprefix --openssldir=${libdir}/ssl-1.1 --libdir=${libdir} $target + perl ${B}/configdata.pm --dump +} + +do_install () { + oe_runmake DESTDIR="${D}" MANDIR="${mandir}" MANSUFFIX=ssl install + + oe_multilib_header openssl/opensslconf.h + + # Create SSL structure for packages such as ca-certificates which + # contain hard-coded paths to /etc/ssl. Debian does the same. + install -d ${D}${sysconfdir}/ssl + mv ${D}${libdir}/ssl-1.1/certs \ + ${D}${libdir}/ssl-1.1/private \ + ${D}${libdir}/ssl-1.1/openssl.cnf \ + ${D}${sysconfdir}/ssl/ + + # Although absolute symlinks would be OK for the target, they become + # invalid if native or nativesdk are relocated from sstate. + ln -sf ${@oe.path.relative('${libdir}/ssl-1.1', '${sysconfdir}/ssl/certs')} ${D}${libdir}/ssl-1.1/certs + ln -sf ${@oe.path.relative('${libdir}/ssl-1.1', '${sysconfdir}/ssl/private')} ${D}${libdir}/ssl-1.1/private + ln -sf ${@oe.path.relative('${libdir}/ssl-1.1', '${sysconfdir}/ssl/openssl.cnf')} ${D}${libdir}/ssl-1.1/openssl.cnf +} + +do_install_append_class-native () { + create_wrapper ${D}${bindir}/openssl \ + OPENSSL_CONF=${libdir}/ssl-1.1/openssl.cnf \ + SSL_CERT_DIR=${libdir}/ssl-1.1/certs \ + SSL_CERT_FILE=${libdir}/ssl-1.1/cert.pem \ + OPENSSL_ENGINES=${libdir}/ssl-1.1/engines +} + +do_install_append_class-nativesdk () { + mkdir -p ${D}${SDKPATHNATIVE}/environment-setup.d + install -m 644 ${WORKDIR}/environment.d-openssl.sh ${D}${SDKPATHNATIVE}/environment-setup.d/openssl.sh + sed 's|/usr/lib/ssl/|/usr/lib/ssl-1.1/|g' -i ${D}${SDKPATHNATIVE}/environment-setup.d/openssl.sh +} + +PTEST_BUILD_HOST_FILES += "configdata.pm" +PTEST_BUILD_HOST_PATTERN = "perl_version =" +do_install_ptest () { + # Prune the build tree + rm -f ${B}/fuzz/*.* ${B}/test/*.* + + cp ${S}/Configure ${B}/configdata.pm ${D}${PTEST_PATH} + cp -r ${S}/external ${B}/test ${S}/test ${B}/fuzz ${S}/util ${B}/util ${D}${PTEST_PATH} + + # For test_shlibload + ln -s ${libdir}/libcrypto.so.1.1 ${D}${PTEST_PATH}/libcrypto.so + ln -s ${libdir}/libssl.so.1.1 ${D}${PTEST_PATH}/libssl.so + + install -d ${D}${PTEST_PATH}/apps + ln -s ${bindir}/openssl ${D}${PTEST_PATH}/apps + install -m644 ${S}/apps/*.pem ${S}/apps/*.srl ${S}/apps/openssl.cnf ${D}${PTEST_PATH}/apps + install -m755 ${B}/apps/CA.pl ${D}${PTEST_PATH}/apps + + install -d ${D}${PTEST_PATH}/engines + install -m755 ${B}/engines/ossltest.so ${D}${PTEST_PATH}/engines +} + +# Add the openssl.cnf file to the openssl-conf package. Make the libcrypto +# package RRECOMMENDS on this package. This will enable the configuration +# file to be installed for both the openssl-bin package and the libcrypto +# package since the openssl-bin package depends on the libcrypto package. + +PACKAGES =+ "libcrypto libssl openssl-conf ${PN}-engines ${PN}-misc" + +FILES_libcrypto = "${libdir}/libcrypto${SOLIBS}" +FILES_libssl = "${libdir}/libssl${SOLIBS}" +FILES_openssl-conf = "${sysconfdir}/ssl/openssl.cnf" +FILES_${PN}-engines = "${libdir}/engines-1.1" +FILES_${PN}-misc = "${libdir}/ssl-1.1/misc" +FILES_${PN} =+ "${libdir}/ssl-1.1/*" +FILES_${PN}_append_class-nativesdk = " ${SDKPATHNATIVE}/environment-setup.d/openssl.sh" + +CONFFILES_openssl-conf = "${sysconfdir}/ssl/openssl.cnf" + +RRECOMMENDS_libcrypto += "openssl-conf" +RDEPENDS_${PN}-ptest += "openssl-bin perl perl-modules bash" + +BBCLASSEXTEND = "native nativesdk" -- cgit 1.2.3-korg