| Age | Commit message (Collapse) | Author |
|---|
|
Using the glob function to map signatures to sstate files is very slow
when the sstate is large and accessed over nfs. The lookup now only
loads the necessary prefixes and doesn't use glob as all.
Unfortunately I don't have access to the systems where the performance
isse was noticed and on my test system the glob is fast enough that
the performance numbers aren't useful. I could verify that file list
returned by the new code is the same.
[YOCTO #13539]
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Do not decode the log content into a string only to re-encode it as
binary data again. Some logs might un-intentionally contain bytes that
do not decode as utf-8, as such preserve the log file content as it was
on disk.
Handle the decoding on the resulttool side, but also handle the failure
to decode the data.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This works just like the already existing --no-clean option to the
`devtool reset` command.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The _get_patchset_revs() function returns the patches in an
OrderedDict to keep them ordered. However, this information was lost
when the patches were added to the bbappend file.
Signed-off-by: Niclas Svensson <niclas.svensson@axis.com>
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The commit 8e48b4d6c4 makes wic ignores IMAGE_ROOTFS_SIZE for rootfs
size and makes it uses the computed one only. Re-add support for
IMAGE_ROOTFS_SIZE variable and compute roots size only if the former
is not defined. Moreover the size of a provided directory with
--rootfs-dir="" in the .wks file should always be computed on the fly,
else every partition will be constrained to be the same size as what
ever value was in ROOTFS_SIZE.
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a useful option but not documented in the help text.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This will allow not having to multiply these options for the sdl
frontend, instead combining them as needed.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The script claims it works with dash, make sure that is actually the
case.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
NO_PROXY can also contain just suffixes that do not start with a "*". We
failed to match those so far. Just add an extra "*" to also match those
suffixes. If one was there we get "**" which does not hurt.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This truly fixes the issue that cbc148d5d93d5f3531434fee7b234a16196b3088
wanted to solve, without breaking the iteration over multiple entries.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This reverts commit cbc148d5d93d5f3531434fee7b234a16196b3088.
The quoting causes H to be one string with spaces, so looping over
multiple entries does not work anymore.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This allows to write selftests where we can mock the real socat.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add the OEPTestResultTestCase class as a mix-in class to provide helper
functions for interacting with ptestresults within the extraresults
object generated by the test case.
This class also provides default compression of log text and log files.
Also add support to resulttool for decoding/decompressing log files
embedded in the test results.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Handle multiple results series having ptestresults content. The contents
are merged on a per-result basis where duplicates are ignored (with a
warning message printed). The 'ptestresults.sections' collection is also
merged on a per-suite basis.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds an argument to the log subcommand to extract the raw logs from the
reproducible selftest.
To prevent ambiguity, the "--raw" argument has been renamed
"--raw-ptest", although the old "--raw" argument is kept around for
compatibility.
[YOCTO #13324]
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Similar to bitbake, implement a 'keepalive' output to the console to
ensure CI systems do not kill the process. The default timeout for
bitbake is 5000s.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows us to generate a rootFS with a large filesystem for use with
QEMU.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When extracting the sources for a recipe that has S == WORKDIR and no
local files in the SRC_URI (which, e.g., can happen for a recipe with
a URI that has the unpack=false attribute), the extraction fails with
the following backtrace:
Traceback (most recent call last):
File ".../scripts/devtool", line 344, in <module>
ret = main()
File ".../scripts/devtool", line 331, in main
ret = args.func(args, config, basepath, workspace)
File ".../poky/scripts/lib/devtool/standard.py", line 762, in
modify
initial_rev, _ = _extract_source(srctree, args.keep_temp,
args.branch, False, config, basepath, workspace,
args.fixed_setup, rd, tinfoil, no_overrides=args.no_overrides)
File ".../poky/scripts/lib/devtool/standard.py", line 647, in
_extract_source
bb.process.run('git %s commit -a -m "Committing local file
symlinks\n\n%s"' % (' '.join(useroptions),
oe.patch.GitApplyTree.ignore_commit_prefix), cwd=srctree)
File ".../poky/bitbake/lib/bb/process.py", line 178, in run
raise ExecutionError(cmd, pipe.returncode, stdout, stderr)
bb.process.ExecutionError: Execution of 'git commit -a -m
"Committing local file symlinks
%% ignore"' failed with exit code 1:
On branch devtool
nothing to commit, working tree clean
This is because no files were found in the oe-local-files directory
and consequently no symbolic links were added using `git add`, but the
`git commit` command was still executed.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is the qemu default since qemu 2.2, is generally supported better,
and is recommended by upstream. It also has already been in use for arm/risc
and ovmf.
Additional information:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=13466
https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/
'-vga virtio' emulated hardware remains in use when virgl is enabled via a runqemu override.
Also, adjust the error whitelist, as there is a number of new messages
coming from the drivers that are not actual errors.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's become more commone for files to be named "readme" or "Readme" on github servers
in recent time. So adjust the scanning to allow any mix of case.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There was a discussion about what amount of RAM is appropriate for a
default; the outcome was that for now it is still 256M. Some qemu machine
definitions have however set this to 512M so for the sake of
treating all architectures fairly, they are reset back to 256M.
Also runqemu is adjusted to use 256M if QB_MEM is not set at all.
http://lists.openembedded.org/pipermail/openembedded-core/2019-August/285900.html
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add additional result types into the dictionary to handle dejagnu style
test results. These include PASS, FAIL, XPASS, XFAIL, UNSUPPORTED,
UNTESTED, UNRESOLVED and ERROR.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Right now `devtool build` runs populate_sysroot and packagedata tasks.
Adding deploy to this list, if the recipe has the deploy task, so that
the newly built artifacts are available in the deploy directory.
Applicable only for packages with deploy task, such as kernel.
[YOCTO#13382]
Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently, if a test occurs multiple times over different series, the
code will sum these. This can lead to confusion over the desired
results. Change the code to report the redundant tests and skip adding
an additional values.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add support for specifying a BIOS the same way that the KERNEL variable
is specified. This includes specifying a QB_DEFAULT_BIOS variable.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The layer checks are designed to work with OEBasicHash so ensure that handler
is in use rather than the new hash equivalency one as an example.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using different root directories with a wks file wic is using the
value from the original ROOTFS_SIZE which is not correct. Example:
Number Start End Size File system Name Flags
1 20.5kB 318MB 318MB fat16 otaefi legacy_boot, msftdata
2 318MB 636MB 318MB ext4 otaboot
3 636MB 1709MB 1074MB ext4 otaroot
4 1709MB 2027MB 318MB ext4 otaboot_b
5 2027MB 3101MB 1074MB ext4 otaroot_b
6 3101MB 5249MB 2147MB ext4 fluxdata
The partitions 1, 2, and 3 incorrectly inherit the size, instead of using
a computed size. With the patch applied it is working properly:
Number Start End Size File system Name Flags
1 20.5kB 14.5MB 14.5MB fat16 otaefi legacy_boot, msftdata
2 14.5MB 65.3MB 50.8MB ext4 otaboot
3 65.3MB 1139MB 1074MB ext4 otaroot
4 1139MB 1190MB 50.8MB ext4 otaboot_b
5 1190MB 2264MB 1074MB ext4 otaroot_b
6 2264MB 4411MB 2147MB ext4 fluxdata
As for the removal of the bb.warn, if the size is not specified, it is
not something to warn the end user about. Some of my default images
make use of the head room + a computed directory size or while generating
images.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to create a msdos partition table disk image that can auto
expand after the image is copied to an SD card, wic needs the ability
to have a primary partition as the last entry. The desired use case
is to be able to create an A/B update partition image scheme with a
/var volume that can be auto expanded to the remainder of the SD card
at run time.
The typical .wks file will look similar to the following:
bootloader --ptable msdos
part / --source rawcopy --sourceparams="file=u-boot.imx" \
--ondisk mmcblk --no-table --align 1 --size 1
part /boot --source bootimg-partition \
--ondisk mmcblk --fstype=vfat --label boot --active --align 4 --size 16
part / --source rawcopy --sourceparams="file=imx6_boot.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaboot --align 4 --type logical
part / --source rawcopy --sourceparams="file=imx6.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaroot --align 4 --type logical
part / --source rawcopy --sourceparams="file=imx6_boot.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaboot_b --align 4 --type logical
part / --source rawcopy --sourceparams="file=imx6.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaroot_b --align 4 --type logical
part /var --source rawcopy --sourceparams="file=imx6_var.otaimg" \
--ondisk mmcblk --fstype=ext4 --label fluxdata --align 4
Without the patch applied, wic will generate an SD card image that looks like:
Disk boot.img: 890940s
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 2056s 48001s 45946s primary fat16 lba
2 48008s 132467s 84460s primary ext4
3 132472s 454467s 321996s primary ext4
4 454471s 890939s 436469s extended lba
5 454472s 538931s 84460s logical ext4
6 538936s 860931s 321996s logical ext4
7 860936s 890939s 30004s logical ext4 boot
With the patch applied a primary partition can be created at the end
of the image which can be expanded to fill the free space on the media
where the image has been copied, which looks like:
Disk boot.img: 890940s
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 2056s 48001s 45946s primary fat16 lba
2 48007s 860931s 812925s extended lba
5 48008s 132467s 84460s logical ext4
6 132472s 454467s 321996s logical ext4
7 454472s 538931s 84460s logical ext4
8 538936s 860931s 321996s logical ext4
3 860936s 890939s 30004s primary ext4 boot
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The EnrollDefaultKeys.efi application (distributed in ovmf-shell-image)
expects the hypervisor to provide a Platform Key and first Key Exchange
Key certificate.
For QEMU, this is done by adding an OEM string in the Type 11 SMBIOS
table. The string contains the EnrollDefaultKeys application GUID followed
by the certificate string. For now, the string is passed in the command
line until QEMU understands OEM strings from regular files (please see
https://bugs.launchpad.net/qemu/+bug/1826200).
If runqemu detects it is given an OVMF binary with support for Secure Boot
(i.e., ovmf.secboot* binaries), extract the certificate string from the
OvmfPkKek1.pem certificate and modify the command-line parameters to
provide the key. Such certificate is created when building OVMF with
support for Secure Boot.
Cc: Ross Burton <ross.burton@intel.com>
Cc: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
|
|
when runqemu with slirp option on same host with different
users, it will report PermissionError: [Errno 13] Permission
denied: '/tmp/qemu-port-locks/2222.lock'
and during handle this exception, another exception happened since
key not exist. Fix by check if key exist first
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a single-commit series had a shortlog containing a "/" character then
that prevented putting the shortlog into the subject of the cover letter
message. Use a different separating character with the sed command (one
much less likely to appear) in order to fix it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When attempting to create a pull request, we look at the remote URL in
order to extract information to include in the cover letter. However,
the assumption was that the remote is an SSH URL i.e. containing '@'
which is not always the case (the pull and push URLs might be different,
or we might be pushing via https) - if it wasn't the script just gave up
leaving you to manually edit the URLs in the email. With a few minor
tweaks to the regexes the script will work for these cases as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is race condition when multi qemu starting with slirp,
add lockfile for each port to avoid problem like:
runqemu - ERROR - Failed to run qemu: qemu-system-x86_64: Could not set up host forwarding rule 'tcp::2323-:23'
[YOCTO #13364]
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
hdddirect was removed in commit 929ba563f1bc7195c4981b8e139c432b2cc388ea.
Signed-off-by: Daniel Ammann <daniel.ammann@bytesatwork.ch>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a source plugin that support both EFI and legacy PC-Bios.
While using this plugin, both bootloaders configurations reside
in the same /boot partitions.
This plugin has very little code : to avoid code duplication,
we simply re-import bootimg-pcbios and bootmg-efi source and
call both their SourcePlugin methods.
Signed-off-by: William Bourque <wbourque@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For now, the temp dir is left in system, although the temporary
source directory has been cleaned up. So we clean it up too.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commit 450335ba5e73a375eb9932b4c4cf37979640dbfc copies the pseudo
database to the working directory in order to have ownership information
when the filesystem is generated.
Unfortunately this does not work anymore. The filenames on the database
are absolute and there is no information about the new directory.
Instead of fixing the database, we could redo a bit the way we patch the
fstab file. Now I am saving the old contents of fstab, modifying the
file and then reverting the changes on exit.
This is faster than the previous approach, although it can cause
indeterminism if the application is killed before finishing.
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
when INITRAMFS_IMAGE_BUNDLE and INITRAMFS_IMAGE are set, wic should
look for kernel with initramfs image bundled.
Include required variable MACHINE, INITRAMFS_IMAGE_BUNDLE,
INITRAMFS_IMAGE, INITRAMFS_LINK_NAME and KERNEL_IMAGETYPE in WICVARS.
No longer require default value for variable kernel as KERNEL_IMAGETYPE
is not optional variable and included in WICVARS.
image_types_wic to inherit kernel-artifact-names to obtain default
INITRAMFS_LINK_NAME when INITRAMFS_IMAGE_BUNDLE are set.
update wic.Wic2.test_image_env test case to filter optional
variable INITRAMFS_LINK_NAME, INITRAMFS_IMAGE and INITRAMFS_IMAGE_BUNDLE.
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds a command line option to filter out the buildstats-diff report by
one more more tasks. e.g.:
buildstats-diff --only-task do_compile A B
will only show the differences for do_compile tasks. The --only-task
option can be specified multiple times to filter out multiple tasks at
once.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All packages that support the menuconfig task will be able to run
devtool menuconfig command. This would allow the user to modify the
current configure options and create a config fragment which can be
added to a recipe using devtool finish.
1. The patch checks if devtool menuconfig command is called for a valid
package.
2. It checks for oe-local-files dir within source and creates one if
needed, this directory is needed to store the final generated config
fragment so that devtool finish can update the recipe.
3. Menuconfig command is called for users to make necessary changes.
After saving the changes, diffconfig command is run to generate the
fragment.
Syntax:
devtool menuconfig <package name>
Ex: devtool menuconfig linux-yocto
The config fragment is saved as devtool-fragment.cfg within
oe-local-files dir.
Ex:
<workspace_path>/sources/linux-yocto/oe-local-files/devtool-fragment.cfg
Run devtool finish to update the recipe by appending the config fragment
to SRC_URI and place a copy of the fragment within the layer where the
recipe resides.
Ex: devtool finish linux-yocto meta
[YOCTO #10416]
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
not present
If kernel source is not already downloaded i.e staging kernel dir is
empty, place a copy of the source when the user runs devtool modify
linux-yocto. This way the kernel source is available for other packages
that use it.
[YOCTO #10416]
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
if its already downloaded
In the regular devtool modify flow, the kernel source is fetched by
running do_fetch task. This is an overhead in time and space.
This patch updates modify command to check if the kernel source is
already downloaded. If so, then instead of calling do_fetch, copy the
source from work-shared to devtool workspace by creating hard links
else run the usual devtool modify flow and call do_fetch task.
[YOCTO #10416]
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As part of upgrading a recipe we create the upgraded recipe file in the
workspace and then try to parse it so we can then make further
modifications. If for some reason that parsing fails then the failure
was not being handled very well - the broken recipe was being left in
place, breaking parsing until it was removed by hand. Fix that by adding
a call to the cleanup function, and fix the following issues:
* Fix the cleanup function which doesn't look like it has ever worked
due to a typo in the function call
* Fix double-printing the error message
* Remove usage of DevtoolError in this case (DevtoolError is for simple
usage errors, not this kind of issue which may be the result of a
bug).
We're still printing a traceback in this scenario but at least it
doesn't break the build system requiring manual cleanup. I also
introduced a command-line option to preserve the broken upgraded recipe
file(s) for debugging purposes.
(The reproducer for this is "devtool upgrade libnewt-python", however
you need to check out revision b82ea144e144671d3f64c0785ba4beafe905cd4f
or earlier since that recipe has now been absorbed into the libnewt
recipe. The libnewt-python recipe was causing an issue with the upgrade
because it actually included the libnewt recipe using ${PV} in the
include statement, and of course PV was changing in the upgrade.)
Fixes [YOCTO #13404].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a setup.py file exists it ought to have something in it before we
consider the source tree to be a Python module and treating it as such.
(A counter-example is https://www.bro.org/downloads/binpac-0.50.tar.gz -
it's not clear why this has a zero-length setup.py in it but we should
pay no attention to it.)
Fixes [YOCTO #12923].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
P (which is ${PN}-${PV}) isn't terribly useful in this context - we
don't really care what the version is, but we do want to know what the
recipe is so we can find it or set PACKAGECONFIG_pn-<PN> in our
configuration, so display ${PN} instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
writeable
Make the error messages a little more friendly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The blacklist, whilst previously useful for safety, is now becoming
obsolete - on my current system, the main storage is at /dev/nvme* and
if I plug in a USB stick it shows up as /dev/sdb which was previously
blacklisted. To make this more flexible, remove the blacklist and
instead check if the specified device is mounted, has a partition
that is mounted, or is otherwise in use according to the kernel, and
show an appropriate error and quit if so.
To make this robust, also ensure we handle where the specified device is
a symlink to another device.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
UNKOWN -> UNKNOWN
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Konrad Scherer
Nathan Rossi
Peter Kjellerstedt
Niclas Svensson
Alessio Igor Bogani
Richard Purdie
Alexander Kanavin
Henning Schild
Joshua Watt
Drew Moseley
Alistair Francis
Mark Hatle
Jaewon Lee
Jon Mason
Jason Wessel
Ricardo Neri
Changqing Li
Paul Eggleton
Daniel Ammann
William Bourque
Chen Qi
Ricardo Ribalda Delgado
Chee Yang Lee
Sai Hari Chandana Kalluri
Ross Burton