Age | Commit message (Collapse) | Author |
|
When using different root directories with a wks file wic is using the
value from the original ROOTFS_SIZE which is not correct. Example:
Number Start End Size File system Name Flags
1 20.5kB 318MB 318MB fat16 otaefi legacy_boot, msftdata
2 318MB 636MB 318MB ext4 otaboot
3 636MB 1709MB 1074MB ext4 otaroot
4 1709MB 2027MB 318MB ext4 otaboot_b
5 2027MB 3101MB 1074MB ext4 otaroot_b
6 3101MB 5249MB 2147MB ext4 fluxdata
The partitions 1, 2, and 3 incorrectly inherit the size, instead of using
a computed size. With the patch applied it is working properly:
Number Start End Size File system Name Flags
1 20.5kB 14.5MB 14.5MB fat16 otaefi legacy_boot, msftdata
2 14.5MB 65.3MB 50.8MB ext4 otaboot
3 65.3MB 1139MB 1074MB ext4 otaroot
4 1139MB 1190MB 50.8MB ext4 otaboot_b
5 1190MB 2264MB 1074MB ext4 otaroot_b
6 2264MB 4411MB 2147MB ext4 fluxdata
As for the removal of the bb.warn, if the size is not specified, it is
not something to warn the end user about. Some of my default images
make use of the head room + a computed directory size or while generating
images.
(From OE-Core rev: 8e48b4d6c4d0ed213089a7449fea63aa0656e786)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to create a msdos partition table disk image that can auto
expand after the image is copied to an SD card, wic needs the ability
to have a primary partition as the last entry. The desired use case
is to be able to create an A/B update partition image scheme with a
/var volume that can be auto expanded to the remainder of the SD card
at run time.
The typical .wks file will look similar to the following:
bootloader --ptable msdos
part / --source rawcopy --sourceparams="file=u-boot.imx" \
--ondisk mmcblk --no-table --align 1 --size 1
part /boot --source bootimg-partition \
--ondisk mmcblk --fstype=vfat --label boot --active --align 4 --size 16
part / --source rawcopy --sourceparams="file=imx6_boot.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaboot --align 4 --type logical
part / --source rawcopy --sourceparams="file=imx6.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaroot --align 4 --type logical
part / --source rawcopy --sourceparams="file=imx6_boot.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaboot_b --align 4 --type logical
part / --source rawcopy --sourceparams="file=imx6.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaroot_b --align 4 --type logical
part /var --source rawcopy --sourceparams="file=imx6_var.otaimg" \
--ondisk mmcblk --fstype=ext4 --label fluxdata --align 4
Without the patch applied, wic will generate an SD card image that looks like:
Disk boot.img: 890940s
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 2056s 48001s 45946s primary fat16 lba
2 48008s 132467s 84460s primary ext4
3 132472s 454467s 321996s primary ext4
4 454471s 890939s 436469s extended lba
5 454472s 538931s 84460s logical ext4
6 538936s 860931s 321996s logical ext4
7 860936s 890939s 30004s logical ext4 boot
With the patch applied a primary partition can be created at the end
of the image which can be expanded to fill the free space on the media
where the image has been copied, which looks like:
Disk boot.img: 890940s
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 2056s 48001s 45946s primary fat16 lba
2 48007s 860931s 812925s extended lba
5 48008s 132467s 84460s logical ext4
6 132472s 454467s 321996s logical ext4
7 454472s 538931s 84460s logical ext4
8 538936s 860931s 321996s logical ext4
3 860936s 890939s 30004s primary ext4 boot
(From OE-Core rev: 56add7cc547e0113cdf980579d1421b14cc233e5)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The EnrollDefaultKeys.efi application (distributed in ovmf-shell-image)
expects the hypervisor to provide a Platform Key and first Key Exchange
Key certificate.
For QEMU, this is done by adding an OEM string in the Type 11 SMBIOS
table. The string contains the EnrollDefaultKeys application GUID followed
by the certificate string. For now, the string is passed in the command
line until QEMU understands OEM strings from regular files (please see
https://bugs.launchpad.net/qemu/+bug/1826200).
If runqemu detects it is given an OVMF binary with support for Secure Boot
(i.e., ovmf.secboot* binaries), extract the certificate string from the
OvmfPkKek1.pem certificate and modify the command-line parameters to
provide the key. Such certificate is created when building OVMF with
support for Secure Boot.
Cc: Ross Burton <ross.burton@intel.com>
Cc: Patrick Ohly <patrick.ohly@intel.com>
(From OE-Core rev: 5e47316ae62f7632fb62bc3b8093ac42f9e3541c)
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
when runqemu with slirp option on same host with different
users, it will report PermissionError: [Errno 13] Permission
denied: '/tmp/qemu-port-locks/2222.lock'
and during handle this exception, another exception happened since
key not exist. Fix by check if key exist first
(From OE-Core rev: 56f30e5377ebe5cc4544f081e001934706a0d8d3)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a single-commit series had a shortlog containing a "/" character then
that prevented putting the shortlog into the subject of the cover letter
message. Use a different separating character with the sed command (one
much less likely to appear) in order to fix it.
(From OE-Core rev: d4c3f93d7407ac1ea20b33149f20153972d631c0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When attempting to create a pull request, we look at the remote URL in
order to extract information to include in the cover letter. However,
the assumption was that the remote is an SSH URL i.e. containing '@'
which is not always the case (the pull and push URLs might be different,
or we might be pushing via https) - if it wasn't the script just gave up
leaving you to manually edit the URLs in the email. With a few minor
tweaks to the regexes the script will work for these cases as well.
(From OE-Core rev: 675e88e6e0bbd5ab2dcd4bdf97b0de59925a1be6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is race condition when multi qemu starting with slirp,
add lockfile for each port to avoid problem like:
runqemu - ERROR - Failed to run qemu: qemu-system-x86_64: Could not set up host forwarding rule 'tcp::2323-:23'
[YOCTO #13364]
(From OE-Core rev: ceb3555a40ba06e58914465376aaf41392c12a7c)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
hdddirect was removed in commit 929ba563f1bc7195c4981b8e139c432b2cc388ea.
(From OE-Core rev: 7a91a9818057d69cba32db2428ffc1a1ebb3876e)
Signed-off-by: Daniel Ammann <daniel.ammann@bytesatwork.ch>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a source plugin that support both EFI and legacy PC-Bios.
While using this plugin, both bootloaders configurations reside
in the same /boot partitions.
This plugin has very little code : to avoid code duplication,
we simply re-import bootimg-pcbios and bootmg-efi source and
call both their SourcePlugin methods.
(From OE-Core rev: c8545d54139c6c48bffd1dd1d39d79891626c6f7)
Signed-off-by: William Bourque <wbourque@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For now, the temp dir is left in system, although the temporary
source directory has been cleaned up. So we clean it up too.
(From OE-Core rev: 8a0602327d5afcf4f36850d3f05c9721305852af)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commit 450335ba5e73a375eb9932b4c4cf37979640dbfc copies the pseudo
database to the working directory in order to have ownership information
when the filesystem is generated.
Unfortunately this does not work anymore. The filenames on the database
are absolute and there is no information about the new directory.
Instead of fixing the database, we could redo a bit the way we patch the
fstab file. Now I am saving the old contents of fstab, modifying the
file and then reverting the changes on exit.
This is faster than the previous approach, although it can cause
indeterminism if the application is killed before finishing.
(From OE-Core rev: dcbf7b864dd1713b54a172d8714ce1508482f086)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
when INITRAMFS_IMAGE_BUNDLE and INITRAMFS_IMAGE are set, wic should
look for kernel with initramfs image bundled.
Include required variable MACHINE, INITRAMFS_IMAGE_BUNDLE,
INITRAMFS_IMAGE, INITRAMFS_LINK_NAME and KERNEL_IMAGETYPE in WICVARS.
No longer require default value for variable kernel as KERNEL_IMAGETYPE
is not optional variable and included in WICVARS.
image_types_wic to inherit kernel-artifact-names to obtain default
INITRAMFS_LINK_NAME when INITRAMFS_IMAGE_BUNDLE are set.
update wic.Wic2.test_image_env test case to filter optional
variable INITRAMFS_LINK_NAME, INITRAMFS_IMAGE and INITRAMFS_IMAGE_BUNDLE.
(From OE-Core rev: bac984fbb2d5ad5d13ba3275c8a3e878d8753c58)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds a command line option to filter out the buildstats-diff report by
one more more tasks. e.g.:
buildstats-diff --only-task do_compile A B
will only show the differences for do_compile tasks. The --only-task
option can be specified multiple times to filter out multiple tasks at
once.
(From OE-Core rev: a8c7960d24c48107fd3703e49c38f890e84e2226)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All packages that support the menuconfig task will be able to run
devtool menuconfig command. This would allow the user to modify the
current configure options and create a config fragment which can be
added to a recipe using devtool finish.
1. The patch checks if devtool menuconfig command is called for a valid
package.
2. It checks for oe-local-files dir within source and creates one if
needed, this directory is needed to store the final generated config
fragment so that devtool finish can update the recipe.
3. Menuconfig command is called for users to make necessary changes.
After saving the changes, diffconfig command is run to generate the
fragment.
Syntax:
devtool menuconfig <package name>
Ex: devtool menuconfig linux-yocto
The config fragment is saved as devtool-fragment.cfg within
oe-local-files dir.
Ex:
<workspace_path>/sources/linux-yocto/oe-local-files/devtool-fragment.cfg
Run devtool finish to update the recipe by appending the config fragment
to SRC_URI and place a copy of the fragment within the layer where the
recipe resides.
Ex: devtool finish linux-yocto meta
[YOCTO #10416]
(From OE-Core rev: 417feb559a74b367315e8658d6ba868a4f8d1340)
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
not present
If kernel source is not already downloaded i.e staging kernel dir is
empty, place a copy of the source when the user runs devtool modify
linux-yocto. This way the kernel source is available for other packages
that use it.
[YOCTO #10416]
(From OE-Core rev: bb42ab90835e8ec2f1dfbb35056c353784693266)
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
if its already downloaded
In the regular devtool modify flow, the kernel source is fetched by
running do_fetch task. This is an overhead in time and space.
This patch updates modify command to check if the kernel source is
already downloaded. If so, then instead of calling do_fetch, copy the
source from work-shared to devtool workspace by creating hard links
else run the usual devtool modify flow and call do_fetch task.
[YOCTO #10416]
(From OE-Core rev: 3c3a9bae296f849dbfe03942282f44036e6fa1fb)
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: d2755523d339a4eba7a034bdef5563657609f563)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As part of upgrading a recipe we create the upgraded recipe file in the
workspace and then try to parse it so we can then make further
modifications. If for some reason that parsing fails then the failure
was not being handled very well - the broken recipe was being left in
place, breaking parsing until it was removed by hand. Fix that by adding
a call to the cleanup function, and fix the following issues:
* Fix the cleanup function which doesn't look like it has ever worked
due to a typo in the function call
* Fix double-printing the error message
* Remove usage of DevtoolError in this case (DevtoolError is for simple
usage errors, not this kind of issue which may be the result of a
bug).
We're still printing a traceback in this scenario but at least it
doesn't break the build system requiring manual cleanup. I also
introduced a command-line option to preserve the broken upgraded recipe
file(s) for debugging purposes.
(The reproducer for this is "devtool upgrade libnewt-python", however
you need to check out revision b82ea144e144671d3f64c0785ba4beafe905cd4f
or earlier since that recipe has now been absorbed into the libnewt
recipe. The libnewt-python recipe was causing an issue with the upgrade
because it actually included the libnewt recipe using ${PV} in the
include statement, and of course PV was changing in the upgrade.)
Fixes [YOCTO #13404].
(From OE-Core rev: c519ac360796675d7fc09a5250d21f0f5b6236fc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a setup.py file exists it ought to have something in it before we
consider the source tree to be a Python module and treating it as such.
(A counter-example is https://www.bro.org/downloads/binpac-0.50.tar.gz -
it's not clear why this has a zero-length setup.py in it but we should
pay no attention to it.)
Fixes [YOCTO #12923].
(From OE-Core rev: 548a5c8f42c6ac1b0f7962926d05276e71505678)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
P (which is ${PN}-${PV}) isn't terribly useful in this context - we
don't really care what the version is, but we do want to know what the
recipe is so we can find it or set PACKAGECONFIG_pn-<PN> in our
configuration, so display ${PN} instead.
(From OE-Core rev: 7facaacd145c2924414ad63ddce07602a72d02c1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
writeable
Make the error messages a little more friendly.
(From OE-Core rev: 36f308b0134c69b439152c2473a274d96b0fee89)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The blacklist, whilst previously useful for safety, is now becoming
obsolete - on my current system, the main storage is at /dev/nvme* and
if I plug in a USB stick it shows up as /dev/sdb which was previously
blacklisted. To make this more flexible, remove the blacklist and
instead check if the specified device is mounted, has a partition
that is mounted, or is otherwise in use according to the kernel, and
show an appropriate error and quit if so.
To make this robust, also ensure we handle where the specified device is
a symlink to another device.
(From OE-Core rev: 49043de1a7716ad612fb92a2e8a52e43d253c800)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
UNKOWN -> UNKNOWN
(From OE-Core rev: adf632c959e7f6595b697726fe64ddda40b9f249)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This switches the code to build pkgdata specific to the current recipe
which means that its filtered to the recipes dependencies and can perform
better as we can drop the lockfile.
It uses a similar method to the staging code to do this, using BB_TASKDEPDATA
to construct a list of packagedata task output which this recipe should "see".
The original pkgdata store is left unaltered so existing code works.
The lock file was there to prevent files disappearing as they were read or as
directories were listed. Since we have a copy of the data and only access output
from completed tasks (as per their manifests), we can remove the lock.
The lock was causing starvation issues on systems with parallelism.
There was also a potential determinism problem as the current code could "see"
data from recipes which it doesn't depend upon.
[YOCTO #13412]
(From OE-Core rev: 1951132576bfb95675b4879287f8b3b7c47524fa)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 9303f92599343adf645fee5d2434fadd97e7febb)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Testinfo:
In kernel's builddir:
$ /path/to/oe-core/scripts/tiny/ksum.py
Collecting object files [DONE]
Totals:
vmlinux:
text data bss total
10933110 3824470 1605632 16363212
modules (2004):
text data bss total
46144408 3047516 167580 49359504
vmlinux + modules:
text data bss total
57077518 6871986 1773212 65722716
(From OE-Core rev: a55955f337b4cebf557f96f5dd7c2edc0bfa6d8a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently `devtool finish RECIPE meta' will silently succeed even
if there are multiple layers having the same base name of 'meta'.
e.g. meta layer from oe-core and meta layer from meta-secure-core.
We should at least give user a warning in such case. With the patch,
we will get warning like below.
WARNING: Multiple layers have the same base name 'meta', use the first one '<PROJ_DIR>/oe-core/meta'.
WARNING: Consider using path instead of base name to specify layer:
<PROJ_DIR>/oe-core/meta
<PROJ_DIR>/meta-secure-core/meta
(From OE-Core rev: 2c8740f543c38dbaef3345e40827ef48b3f75405)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The intercept is called update_icon_cache which is vague: rename to
update_gtk_icon_cache to make it clearer what it is for, and add a comment
explaining what class caused it to be used.
(From OE-Core rev: 3158adbe684890adc56af11e19af872e90e09d41)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow plugin bootimg-efi to configure with multiple initrd
through source parameter.
Uses ; to separate each initrd.
e.g:
--sourceparams="loader=${EFI_PROVIDER},initrd=initrd1;initrd2"
(From OE-Core rev: c7b0823f9ab6a9959aaa809b8c3f70d199feb64d)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current QA team need to merge test result files from multiple sources.
Adding TESTSERIES configuration too early will have negative
implication to report and regression. Enable control to add TESTSERIES
when needed. Also enable adding EXECUTED_BY configuration when
needed.
(From OE-Core rev: 651d8d371e78e77599d56681228d5782664f7743)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current results stored does not have information needed to trace who
executed the tests. Enable store to add EXECUTED_BY configuration
to results file in order to track who executed the tests.
(From OE-Core rev: dca2a57d54163a2e63b06e2f140fea3bd49cef0d)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current resultutils library always add "TESTSERIES" configuration
to results. Enhance this to allow control of adding "TESTSERIES"
configuration as well as allow adding extra configurations
when needed.
(From OE-Core rev: 443c0acc14ef2451b10878fc83dd11b46805daf0)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
replaced hardcoded kernel image with KERNEL_IMAGETYPE.
set kernel image to "bzImage" incase KERNEL_IMAGETYPE not set.
(From OE-Core rev: 88a9fef761c5e67b2964fedc85a7e8ad37067564)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for generating python3 recipes using the recipetool / devtool.
Drop python2 support at the same time.
Tested with:
oe-selftest -r recipetool.RecipetoolTest
[YOCTO #13264]
(From OE-Core rev: d8b2f58974482b3b1ccc65c5f93104d0d7ba87bc)
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
wic images are handled as vmtype images. Starting qemu with "-kernel"
parameter and an image of type wic is not supported. Especially for
"-machine virt" the combination of wic with -kernel parameter would
be beneficial.
The new parameter QB_FSINFO allows to pass image type specific flags to
runqemu. QB_FSINFO is a space separated list of parameters. Parameters are
structured according to the following pattern: image-type:flag.
For now two parameters are supported:
- wic:no-kernel-in-fs
The wic image is treated as rootfs only image. A -kernel option is
passed to qemu.
- wic:kernel-in-fs
The wic image is treated as VM image including a bootloader and a
kernel. This is still the default behavior.
Example:
QB_DEFAULT_FSTYPE = "wic"
QB_FSINFO = "wic:no-kernel-in-fs"
QB_KERNEL_ROOT = "/dev/vda1"
QB_SYSTEM_NAME = "qemu-system-aarch64"
QB_MACHINE = "-machine virt"
...
[YOCTO #13336]
(From OE-Core rev: 2aa79a67affd22dfa37e4c2945c6ab0c86321f98)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some file systems don't support fetching the block size (notably the file system
Docker uses for containers), so handle the iotctl() failing and raise the
expected error.
(From OE-Core rev: 3757073726a00c5250556aae3d0daac76b88085e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
allow wic to list and search for kickstart file in .wks.in extension.
basename show by wic list images to fully exclude extension.
(From OE-Core rev: 2c0a292a790ad069648e37b1b29fcea656fcf3e4)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In some cases(such as the oeqa's qemurunner), we need to setup multi
serial devices via the '-serial 127.0.0.1:xx" and the order of them
is significant. The mixing use of "tcpserial" and "-serial 127.0.0.1:xx"
cause ambiguous issues and we can't fix it by only adjusting the order
of them. So add the support to pass multi ports to the tcpserial
parameter, this will make sure that the order of setting up the serial
is really what we want.
[YOCTO Bug 13309]
(From OE-Core rev: 766c3b56e5071b5a5a64e88df6d3abe5232dd958)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Printing the lack of a test is not necessary (per feedback). Remove
this from the template to quieten it.
(From OE-Core rev: b1fe6ae66360e160eeaeafe456536f335a0eab60)
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the creation of test case configuration file based on user inputs.
Where this testcase configuration file will be used by the the manual
execution to run selected test cases for a module rather than compulsory
run all test cases in manual json file.
(From OE-Core rev: 73d2a747c17779da0ca972da776b3cf02c2e1cbc)
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, the code will sum all of the different machine results into a
single report of the tests results. This can lead to confusion as to
which machine may be experiencing issues. Modify the code to store the
results in a per machine basis and report them accordingly.
(From OE-Core rev: 16d4031ea5df8a4ddfdb937d35464c09e1abd10e)
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The main issue is to make the x86 checks apply to x86 targets only. We may
end up with better checks on other architectures but this adapts the code to
allow for that and its still controlled by whether QB_CPU_KVM is set.
The code needed minor refactoring so the qemu-system-XXX name is set
earlier so the kvm code can use it.
(From OE-Core rev: 06c473a0127f19b76d0f647b87873944add1e331)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add new source parameter label to allow custom boot.conf/grub.cfg label,
so far it's hardcoded to "Boot".
Default label to "Boot" for systemd-boot and blank for grub-efi when source
parameter label are not set.
(From OE-Core rev: 7a0aab1aa31e66e6bc94c04c2f6c1043b64a8967)
Signed-off-by: Chee Yang Lee <chee.yang.lee at intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
volume name should refer to --label in .wks.
Replace the hardcoded volume name with label.
set "ESP" as default name when no lable specified.
(From OE-Core rev: 5621aceaf39ef0dc097b16c83e73b9882c987a7c)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds SPDX license headers in place of the wide assortment of things
currently in our script headers. We default to GPL-2.0-only except for the
oeqa code where it was clearly submitted and marked as MIT on the most part
or some scripts which had the "or later" GPL versioning.
The patch also drops other obsolete bits of file headers where they were
encoountered such as editor modelines, obsolete maintainer information or
the phrase "All rights reserved" which is now obsolete and not required in
copyright headers (in this case its actually confusing for licensing as all
rights were not reserved).
More work is needed for OE-Core but this takes care of the bulk of the scripts
and meta/lib directories.
The top level LICENSE files are tweaked to match the new structure and the
SPDX naming.
(From OE-Core rev: f8c9c511b5f1b7dbd45b77f345cb6c048ae6763e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds an option to dump all the ptest logs to individual files in a
specified directory. If multiple test runs are present, the
'--prepend-run' argument will create separate directories for each test
run under the target directory and put the logs there to prevent each
test run from clobbering the others.
[YOCTO #13331]
(From OE-Core rev: f262b9e7482e38f04dfa162f0aaf65b17e86f8b2)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The chart size extents were being incorrectly reported, not accounting for the
width of the legend. Set a minimum width to account for that (its fixed size).
Also stop printing the chart background off the bottom of the chart extents.
(From OE-Core rev: ef257afb772daf721f12cb3ff9708d39da06f2c9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This tweaks some intermediate variable names to make it clearer what
is being done.
(From OE-Core rev: 50d9af7bcb05823db36e86170ef9ba3a1d6cfeca)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This updates the pybootchart code (used for viewing build timing profiles)
to use python3. The bulk of the changes are to use gi instead of pygtk, i.e.
port from gtk+2 to gtk+3.
The main change is to make the bootchart widget inherit gtk.Scrollable
and change the way the scrollbars are implemented to match the new method
upstream. The drawing code used cairo already so can remain unchanged,
(From OE-Core rev: 949144681ad7f536732169351cab6d0612e9c566)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The script had a toxic mix of tabs and spaces, fix this.
(From OE-Core rev: 5eebe246e9444a5a7dbf4d8683ae08c468cfc401)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|