| Age | Commit message (Collapse) | Author |
|---|
|
In some cases(such as the oeqa's qemurunner), we need to setup multi
serial devices via the '-serial 127.0.0.1:xx" and the order of them
is significant. The mixing use of "tcpserial" and "-serial 127.0.0.1:xx"
cause ambiguous issues and we can't fix it by only adjusting the order
of them. So add the support to pass multi ports to the tcpserial
parameter, this will make sure that the order of setting up the serial
is really what we want.
[YOCTO Bug 13309]
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Fixes qemuppc hang in warrior]
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Printing the lack of a test is not necessary (per feedback). Remove
this from the template to quieten it.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Allow the creation of test case configuration file based on user inputs.
Where this testcase configuration file will be used by the the manual
execution to run selected test cases for a module rather than compulsory
run all test cases in manual json file.
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Currently, the code will sum all of the different machine results into a
single report of the tests results. This can lead to confusion as to
which machine may be experiencing issues. Modify the code to store the
results in a per machine basis and report them accordingly.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
This adds SPDX license headers in place of the wide assortment of things
currently in our script headers. We default to GPL-2.0-only except for the
oeqa code where it was clearly submitted and marked as MIT on the most part
or some scripts which had the "or later" GPL versioning.
The patch also drops other obsolete bits of file headers where they were
encoountered such as editor modelines, obsolete maintainer information or
the phrase "All rights reserved" which is now obsolete and not required in
copyright headers (in this case its actually confusing for licensing as all
rights were not reserved).
More work is needed for OE-Core but this takes care of the bulk of the scripts
and meta/lib directories.
The top level LICENSE files are tweaked to match the new structure and the
SPDX naming.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
volume name should refer to --label in .wks.
Replace the hardcoded volume name with label.
set "ESP" as default name when no lable specified.
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Adds an option to dump all the ptest logs to individual files in a
specified directory. If multiple test runs are present, the
'--prepend-run' argument will create separate directories for each test
run under the target directory and put the logs there to prevent each
test run from clobbering the others.
[YOCTO #13331]
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The documentation says that --expand takes a comma-separated list of
partition:size pairs, but the code was splitting on hyphens.
Hyphens are not a transitional separator for a list of items, so change the code
to reflect the documentation.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
If attempting to find a fixed SRCREV fails because the directory doesn't exit,
avoid failing with:
Traceback (most recent call last):
File "/home/vagrant/poky/scripts/recipetool", line 121, in <module>
ret = main()
File "/home/vagrant/poky/scripts/recipetool", line 110, in main
ret = args.func(args)
File "/home/vagrant/poky/scripts/lib/recipetool/create.py", line 707, in create_recipe
srcrev = stdout.rstrip()
UnboundLocalError: local variable 'stdout' referenced before assignment
Fixes: 000480c42797 ("recipetool / devtool: set a fixed SRCREV by default when fetching from git")
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Current manualexecution required user to exceute all test cases defined inside a "modulename.json" file in oeqa/manual
There are cases when all test cases all not required to run for a module on specific DUT.
Enable manualexecution to have the optional feature where it will use pre-defined json format test case configuration file
where user will be able to select test cases from the "modulename.json" instead of running all of them. This will help
in reducing testing time and reporting unneccesary skip or failures.
Example pre-defined json format test case configuration file (for build-applince):
{
"testcases" : [
"build-appliance.build-appliance.Create_core-image-sato-sdk_using_build_appliance",
"build-appliance.build-appliance.Build_a_image_without_error_(added_recipe)"
]
}
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Fix AttributeError: module 'urllib' has no attribute 'request' when
using remote http urls.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Adds a subcommand for dumping various logs from test results
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Adds support for resulttool to load JSON files directly from a http://
or https:// URL
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The subprocess.run was replaced by subprocess.check_call because
of compatibility support down to python 3.4. But we really don't
care about whether that command succeeds. Some user reports that
in some tmux environment, this command fails and gives some
unpleasant traceback output. So we use 'call' instead of 'check_call'
to avoid such problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove duplicate codes. Replace unnecessary class variables with
local variables. Rename variables and arguments with simple and
standard name.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When I use recipetool to add a new recipe, it says:
[snip]
sys.exit(14)
NameError: name 'sys' is not defined
[snip]
Signed-off-by: Lei Yang <Lei.Yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the creation of configuration option file based on user inputs.
Where this configuration option file will be used by the the manual
execution to display options for configuration rather than user
need to inputs configuration manually.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current manualexecution required user to input configuration manually
where there were inconsistent inputs and human typo issues.
Enable manualexecution to have the optional feature where it
will use pre-compiled configuration options file where user will
be able to select configuration from the pre-compiled list instead
of manual key-in the configuration. This will eliminate human error.
Expect the pre-compiled configuration options file in json format below
{
"bsps-hw": {
"IMAGE_BASENAME": {
"1": "core-image-sato-sdk"
},
"MACHINE": {
"1": "beaglebone-yocto",
"2": "edgerouter",
"3": "mpc8315e-rdb",
"4": "genericx86",
"5": "genericx86-64"
}
},
"bsps-qemu": {
"IMAGE_BASENAME": {
"1": "core-image-sato-sdk"
},
"MACHINE": {
"1": "qemuarm",
"2": "qemuarm64",
"3": "qemumips",
"4": "qemumips64",
"5": "qemuppc",
"6": "qemux86",
"7": "qemux86-64"
}
}
}
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The cml1 and ccmake bbclasses generate configuration fragment source
files that must be exported from the WORKDIR as a source file to be
preserved across builds. This change adds detection of the current
recipes inherited classes and for cml1 and ccmake classes checks for the
specific generated configuration fragment files. These files are then
exported by devtool and included as SRC_URI files from within the target
layer.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Simplify and removed unnecessary codes.
Refactor to allow pythonic loop.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the manual execution display step by sorting
the step as string, where steps were not being sorted
correctly when there are more than 9 steps.
Fixed the step sorting by sorting step as integer.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current manualexecution required pressing enter button to show each step
information, where this was wasting execution time. Enable display
full steps without needing to any press enter button.
Signed-off-by: Mazliana <mazliana.mohamad@intel.com>
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current input checking does not match the standard input practiced
by QA team. Change the input checking to match the standard
input practiced by the QA team.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than simply discarding the ptest data, change the code to discard
it when writing out the new testresult files, or optionally either preserve
it, or write it as seperate discrete logs.
This means the autobuilder should start writing out individual ptest log
files as well as allowing ueers to extract these manually.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Store operations using a single file as a source weren't working as the os.walk
command didn't like being given a single file. Fix the store operation to
work for single files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On some hosts the wic.Wic2.test_wic_cp_ext selftest was failing as files weren't
being copied into the rootfs with "wic cp". This was due to a bug added by:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=89d4a8df074598cfb3a76e41db7c45d845afd961
where there should be a second newline added at the end of the expression due
to the difference in the way echo -e and printf behave.
[YOCTO #13237]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current validation check function inside resulttool disallow the
report for single result file although the underlying library
was able to handle both directory and file as source input to report.
Removed the validation check as it was no longer needed and to
enable report for single result file.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Devtool creates a git repository for extracted sources in a temporary
directory and then moves it to a final destination after patching is
done. Unfortunately devtool is not aware that some of its git operations
may have caused git garbage collector to start in background. If timing
is just right a repository move fails because GC is removing git objects
while they are being moved.
The issue was hit on Krogoth release, but the code that moves created
git repository is still the same.
Disable gc.autodetach to make GC run synchronously and block git until
it is done.
Traceback (most recent call last):
File "<snip>/openembedded-core/scripts/devtool", line 342, in <module>
ret = main()
File "<snip>/openembedded-core/scripts/devtool", line 329, in main
ret = args.func(args, config, basepath, workspace)
File "<snip>/openembedded-core/scripts/lib/devtool/standard.py", line 352, in extract
initial_rev = _extract_source(srctree, args.keep_temp, args.branch, False, rd)
File "<snip>/openembedded-core/scripts/lib/devtool/standard.py", line 644, in _extract_source
shutil.move(srcsubdir, srctree)
File "/usr/lib/python2.7/shutil.py", line 299, in move
copytree(src, real_dst, symlinks=True)
File "/usr/lib/python2.7/shutil.py", line 208, in copytree
raise Error, errors
Error: [('/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/5e', '<snip>/build/grpc/grpc_src/.git/objects/5e', "[Errno 2] No such file or directory: '/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/5e'"), ('/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/57', '<snip>/build/grpc/grpc_src/.git/objects/57', "[Errno 2] No such file or directory: '/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/57'"), many git objects ... ]
Signed-off-by: Taras Kondratiuk <takondra@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We found that manualexecution does not capture test suite values
correctly if there are more than one test suite in test cases.
After verification has made we found out we should retrieved
full test cases value <test_module.test_suite.test_case> from
oeqa/manual/ json file rather than split it them into new
variables test_suite and test_cases.
Signed-off-by: Mazliana <mazliana.mohamad@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable roll-up all test results belong to a commit
and to provide a roll-up report.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_patch rule of SDK's workspace/appends/linux-*.bbhappend may fail if script are not written in Python
that was the case with Phytec's BSP, the fix was to replace the do_patch rule with :
do_patch[noexec]="1" when the file was generated in scripts/lib/devtool/standard.py
Signed-off-by: Yann CARDAILLAC <yann.cardaillac@smile.fr>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To enable store for testresults.json file from manualexecution,
add layers metadata to configuration and add "manual" map to
resultutils.store_map.
To enable regression for manual, add "manual" map to
resultutils.regression_map. Also added compulsory configurations
('MACHINE', 'IMAGE_BASENAME') to manualexecution.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add an oe-pylint wrapper around pylint3 to run static analysis on our python
codebase. For now display errors and exclude common warnings which are not
applicable to our codebase.
The aim is to start generating this report on the autobuilder and to
improve our score over time.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The script use https protocol by default, but the error-report-web server's
https connection may not work (e.g., doesn't work with python 2.7.6), so add an
option --no-ssl to make it use http.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than recreating handlers and forcing them, iterate over the handlers
and enable color on ones we can handle. This makes it easier to handle color
properly when we introduce the bb.msg default log filters.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If in the future GL is enabled for SDL frontend, or some other
frontend, it would be useful to be able to differentiate.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When Gtk+ and SDL are both enabled, qemu defaults to Gtk+.
This option allows to revert to the 'classic' frontend.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Whilst its tempting to call bitbake_main(), the script also directly executes
bitbake. By doing both this creates all kinds of races. Therefore
change to use subprocess execution in all cases.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows '--sourceparams key1=val1=val11,key2=val2'.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sorted regression results to provide friendly viewing of report.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ptest suites with no results don't show up on the reports even though we have
a duration for them. Fix this so the fact they report no tests is visible.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently some older results files cause the code to give tracebacks.
Handle these missing sections more cleanly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently we cant store results if the results files span multiple
different build revisons. Remove this limitation by iterating.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemu has been using libepoxy for a long time, and libepoxy loads GL via dlopen()
only when instructed to.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the use of an alternate SSH executable for deploy-target and
undeploy-target. The command can be specified with -e / --ssh-exec.
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Kevin Hao
Jon Mason
sangeeta jain
Armin Kuster
Richard Purdie
Chee Yang Lee
Joshua Watt
Ross Burton
Alex Kiernan
Chen Qi
Yeoh Ee Peng
Lei Yang
Nathan Rossi
Taras Kondratiuk
Mazliana
Yann CARDAILLAC
Robert Yang
Christopher Larson
Alexander Kanavin
Jan Kiszka
Olaf Mandel