| Age | Commit message (Collapse) | Author |
|---|
|
git module is not included into standard Python
library and therefore causes import errors on the systems
where PythonGit is not installed.
As git module only used in the code implementing --repository
functionality it's better to import git only in the scope
that requires it.
[YOCTO #10821]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When no --size is specified for the rootfs in the .wks, we want to obey the
rootfs size from the metadata, otherwise the defined IMAGE_ROOTFS_EXTRA_SPACE
and IMAGE_OVERHEAD_FACTOR will not be obeyed. In some cases, this can result
in image construction failure, if the size determined by du was insufficient
to hold the files without the aforementioned extra space.
This fallback from --size to ROOTFS_SIZE was already implemented when
--rootfs-dir is specified in the .wks, but it did not occur otherwise, neither
when --rootfs-dir= was passed to `wic create` nor when IMAGE_ROOTFS was used.
This made a certain amount of sense, as this fallback logic happened at such
a level that it wasn't able to identify which partitions were rootfs
partitions otherwise. Rather than doing it at that level, we can do it in
prepare_rootfs(), which is run by the rootfs source plugins.
Note that IMAGE_OVERHEAD_FACTOR and a --overhead-factor in the .wks will now
both be applied when --size isn't specified in the .wks. A warning is added
about this, though a user won't see it unless wic fails or they examine the
do_image_wic log.
Fixes [YOCTO #10815]
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
getVarFlag() now defaults to expanding by default, thus remove the
True option from getVarFlag() calls with a regex search and
replace.
Search made with the following regex:
getVarFlag ?\(( ?[^,()]*, ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This will add support to use qemu from the running host,
with this is possible to put qemu-native in ASSUME_PROVIDED
variable.
By default it will try to get qemu from the build sysroot,
and only if it fails will try to use the host's qemu.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If we don't catch this then attempting to run devtool in non-memres mode
when bitbake is already running will produce a traceback instead of just
an error message.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Using the setVariable commands here followed by buildFile will result in
"basehash mismatch" errors, and that's expected since we are deviating
*at runtime* from what was previously seen by changing these variable
values. Set BB_HASH_IGNORE_MISMATCH to turn off the errors.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Extracting the source for a recipe (as used by devtool's extract, modify
and upgrade subcommands) requires us to run do_fetch, do_unpack,
do_patch and any tasks that the recipe has inserted inbetween, and do so
with a modified datastore primarily so that we can redirect WORKDIR and
STAMPS_DIR in order to have the files written out to a place of our
choosing and avoid stamping the tasks as having executed in a real build
context respectively. However, this all gets much more difficult when in
memres mode since we can't call internal functions such as
bb.build.exec_func() directly - instead we need to execute the tasks on
the server. To do this we use the buildFile command which already exists
for the purpose of supporting bitbake -b, and setVariable commands to
set up the appropriate datastore.
(I did look at passing the modified datastore to the buildFile command
instead of using setVar() on the main datastore, however its use of
databuilder makes that very difficult, and we'd also need a different
method of getting the changes in the datastore over to the worker as
well.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The autotools code imports oe.package; we weren't experiencing a problem
with this probably due to OE itself adding that path previously.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If PATCHTOOL is "git", and PATCH_COMMIT_FUNCTIONS is set to "1", for
additional tasks between do_unpack and do_patch, make a git commit. This
logic was previously implemented in devtool itself, but it makes more
sense for it to be implemented in the patch class since that's where the
rest of the logic is for this (or in lib/oe/patch.py). It also makes
it possible for this to work with tinfoil2.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use Tinfoil.parse_recipe_file() and Tinfoil.parse_recipe() instead of
the recipeutils equivalents, and replace any local duplicate
implementations. This not only tidies up the code but also allows these
calls to work in memres mode.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
setup_tinfoil() already calls prepare(), we don't need to call it again
ourselves and doing so with tinfoil2 results in "ERROR: Only one copy of
bitbake should be run against a build directory". Calling prepare()
twice should probably still be allowed, so that ought to be fixed
separately, but in the mean time this code is still wrong so fix it
here.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Some variables in pkgdata files have a package-name override. When
the bare variable can not be found, try with the override-variant.
PKGSIZE is one such variable, and already had special code to handle this.
Test included.
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Show usage text if script is not sourced.
Tested in bash, zsh and dash.
[YOCTO #10751]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Created usage output for oe-find-native-sysroot script.
[YOCTO #10751]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Created usage output for oe-git-proxy script.
[YOCTO #10751]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Made usage output of oepydevshell-internal.py to look
similar to the output of other oe scripts.
[YOCTO #10751]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Created usage output for oe-setup-builddir script.
[YOCTO #10751]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Made usage output of oe-setup-rpmrepo to look similar to the
output of other oe scripts.
[YOCTO #10751]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Created usage output for oe-trim-schemas script.
[YOCTO #10751]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Made usage output of oe-run-native to look similar to the
output of other oe scripts.
[YOCTO #10751]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
To allow recipetool plugins in one layer to shadow another in a well
defined way, first search BBPATH/lib/recipetool directories and then
scripts/lib/recipetool and load only the first found.
The previous search and load loop would load all found plugins with the
ones found later replacing any found before.
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
To allow devtool plugins in one layer to shadow another in a well
defined way, first search BBPATH/lib/devtool directories and then
scripts/lib/devool and load only the first found.
The previous search and load loop would load all found plugins with the
ones found later replacing any found before.
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Short variant of wic command line option --skip-build-check
is incorretly named -p. It's named -s in wic help and Yocto
documentation.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Don't worth bother with logical partition on MBR partition type (aka
msdos) if disk image generated by wic should have 4 partitions.
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This new option allows to commit the result to a git repository,
along with the results it will add a metadata file for information
of the current selftest run, such as: hostname, machine, distro,
distro version, host version, and layers.
This implementation will have a branch per different hostname,
testing branch, and machine.
To use this feature use:
oe-selftest <options> --repository <repository_link>
[YOCTO #9954]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Yet another instance of us expecting a string back from subprocess when
in Python 3 what you get back is bytes. Just decode the output within
run_command() so we avoid this everywhere.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Pre-processing /proc data during the build considerably reduces the
amount of data written to disk: 176KB instead of 4.7MB for a 20
minuted build. Parsing also becomes faster.
buildstats.bbclass only writes the reduced logs now, but support for
the full /proc files is kept around as reference.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The internal representation after parsing now matches exactly
what the drawing code needs, thus speeding up drawing a bit.
However, the main motivation is to store exactly that required
information in a more compact file.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This adds a new, separate chart showing the amount of disk space used
over time for each volume monitored during the build. The hight of the
graph entries represents the delta between current usage and minimal
usage during the build.
That's more useful than showing just the current usage, because then a
graph showing changes in the order of MBs in a volume that is several
GB large would be just flat.
The legend shows the maximum of those deltas, i.e. maximum amount of
space needed for the build. Minor caveat: sampling of disk space usage
starts a bit later than the initial task, so the displayed value may
be slightly lower than the actual amount of space needed because
sampling does not record the actual initial state.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When matching fails, m.group(0) is invalid and can't be used in the
error message.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The only real change is the addition of two if checks that skips the
corresponding drawing code when there is no data.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This enables rendering of the original bootchart charts for CPU, disk
and memory usage. It depends on the /proc samples recorded by the
updated buildstats.bbclass. Currently, empty charts CPU and disk usage
charts are drawn if that data is not present; the memory chart already
gets skipped when there's no data, which will also have to be added
for the other two.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The code did not handle x scaling correctly when drawing starts at
some time larger than zero, i.e. it worked for normal bootchart data,
but not for the system statistics recorded by buildstats.bbclass.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Substracting curr_y when determining the hight of the process chart is
wrong because the height is independent of the position where the
chart is about to be drawn. It happens to work at the moment because
curr_y is always 10 when render_processes_chart() gets called. But it
leads to a negative height when other charts are drawn above it, and
then the grid gets drawn on top of those other charts.
Substracting some constant is relevant because otherwise the box is
slightly larger than the process bars. Not sure exactly where that
comes from (text height?); leg_s seems a suitable constant and happens
to be 10, so everything still gets rendered exactly as before.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When creating a patch set with cover letter using the
send-pull-request script, both the "In-Reply-To" and "References"
headers are appended twice in patch 2 and subsequent.
That's because git-format-patch already inserted them and then
git-send-email repeats that. Suppressing mail threading in
git-send-email with --no-thread avoids the problem and is the
right solution because it works regardless whether git-send-email is
called once or twicee.
Repeating these headers is a violation of RFC 2822 and can confuse
mail programs. For example, Patchwork does not detect a patch series
problem when there are these extra headers.
[YOCTO #10718]
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Scripts that produces script data to be consumed by gnuplot.
There are two possible plots depending if either the
-S parameter is present or not:
* without -S: Produces a histogram listing top N recipes/tasks versus
stats. The first stat defined in the -s parameter is the one taken
into account for ranking
* -S: Produces a histogram listing tasks versus stats. In this case,
the value of each stat is the sum for that particular stat in all recipes found.
Stats values are in descending order defined by the first stat defined on -s
EXAMPLES
1. Top recipes' tasks taking into account utime
$ buildstats-plot.sh -s utime | gnuplot -p
2. Tasks versus utime:stime
$ buildstats-plot.sh -s utime:stime -S | gnuplot -p
3. Tasks versus IO write_bytes:IO read_bytes
$ buildstats-plot.sh -s 'IO write_bytes:IO read_bytes' -S | gnuplot -p
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Remove the patch that was applied in the python3 and python3-native
recipes to skip compilation of python modules.
Modify generate-manifest-3.5.py to match '__pycache__' directories in
FILES_*.
This is necessary because Python3 puts .pyc files in '__pycache__'
subdirectories one level below the corresponding .py files, whereas in
Python2 they used to be right next to the sources.
This change significantly reduces the startup overhead of Python3
scripts. For example, on a Cortex-A9, "python3 -c pass" took 0.40s
before, and 0.19s after.
Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In previous implementation, a UnicodeDecodeError exception will be
raised if multi-byte encoded characters are printed by the subprocess.
As an example, the following command will fail in an en_US.UTF-8
environment because wget quotes its saving destination with '‘'(0xE2
0x80 0x98), while just the first byte is provided for decoding:
devtool add recipe http://example.com/source.tar.xz
The patch fixes the issue by avoiding such kind of incomplete decoding.
Signed-off-by: Jiajie Hu <jiajie.hu@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
There are many more stats on buildstats that 'Elapsed time', so make the script
more flexible to support all stats. Some cmd line examples:
$ buildstats.sh -s 'utime'
Buildstats' data covers proc's stats in different areas, including CPU times,
IO, program system resources and child program system resources. In order
to print values on each of these sets from command line, one can use the
following:
$ buildstats.sh -H -s 'TIME' | less
$ buildstats.sh -H -s 'IO' | less
and 'RUSAGE' and 'CHILD_RUSAGE' for program and program's child system
resources.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The hello-mod recipe is unusual in that it has only local files in
SRC_URI and builds these out of ${WORKDIR}. When you use devtool modify
on it, devtool puts all of those files in an "oe-local-files"
subdirectory of the source tree, which is not ${S} (or ${B}) any more
and thus building the recipe afterwards fails. It's a bit of a hack, but
symlink the files in oe-local-files into the source tree (and commit the
symlinks with an ignored commit so that the repo is clean) to work
around the problem. We only do this at time of extraction, so any files
added to or removed from oe-local-files after that won't be handled, but
I think there's a limit to how far we should go to support these kinds
of recipes - ultimately they are anomalies.
I initially tried a hacky workaround where I set effectively set B =
"${WORKDIR}" and that allowed it to build, but other things such as the
LIC_FILES_CHKSUM checks still broke because they expected to find files
in ${S}. Another hack where I set the sourcetree to point to the
oe-local-files subdirectory works for hello-mod but not for makedevs
since whilst that is similar, unlike hello-mod it does in fact have
files in the source tree (since it has a patch that adds COPYING) and
thus the same issue occurred.
Also tweak one of the tests that tries devtool modify / update-recipe on
the makedevs recipe to try building it since that would have caught this
issue.
Fixes [YOCTO #10616].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The .deb import feature did not import postinst, postrm, preinst, or
prerm functions. This change checks to see if those files exist, and
if so, adds the appropriate functions.
[ YOCTO #10421 ]
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Replicate bitbake and eforce en_US.UTF-8 locale so that ouptut of locale-aware
tools remains stable.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you have a patch remotely fetched in a recipe (e.g. from an http
server) that needs updating then add a local version and substitute the
entry in SRC_URI to point to it.
One can argue about how desirable it is to be modifying patches fetched
in this way, but then one can argue about how desirable it is to have
such patches in the recipe in the first place - and in any case if
devtool update-recipe is to correctly transfer changes to such patches
made in the git repository within the source tree to the recipe then
there isn't much choice but to do it this way.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is possible to use gzip or bzip2 to compress patches and still refer
to them in compressed form in the SRC_URI value within a recipe. If you
run "devtool modify" on such a recipe, make changes to the commit for
the patch and then run devtool update-recipe, we need to correctly
associate the commit back to the compressed patch file and re-compress
the patch, neither of which we were doing previously.
Additionally, add an oe-selftest test to ensure this doesn't regress in
future.
Fixes [YOCTO #8278].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
As of the move to Python 3 and the fixes we applied at that time,
bb.process.run() will return a byte array of length 0 rather than an
empty string if the output is empty. That may be a bug that we should
fix, but for now it's easiest to just check the result here before
treating it as a string. This fixes running "devtool update-recipe" or
"devtool finish" on a recipe which has no source tree, for example
initramfs-framework.
Fixes [YOCTO #10563].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Running `oe-selftest --list-tests-by module wic` will produce the
following backtrace:
Traceback (most recent call last):
File "<snip>/poky/scripts/oe-selftest", line 668, in <module>
ret = main()
File "<snip>/poky/scripts/oe-selftest", line 486, in main
list_testsuite_by(criteria, keyword)
File "<snip>/poky/scripts/oe-selftest", line 340, in list_testsuite_by
ts = sorted([ (tc.tcid, tc.tctag, tc.tcname, tc.tcclass, tc.tcmodule) for tc in get_testsuite_by(criteria, keyword) ])
TypeError: unorderable types: int() < NoneType()
The root cause is that a test case does not necessarily have an ID
assigned, hence its value is None. Since Python 3 does not allow
comparison of heterogeneous types, TypeError is raised.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix typos in documentation of Image.add_partition() and
Image.__format_disks().
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We explicitly check for --fstype if no source was provided for a
partition. However, this was not the case for rootfs partitions. Make
sure to raise an error if filesystem was left unspecified when preparing
a rootfs partition image.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It seems that prepare_empty_partition_ext() and
prepare_empty_partition_btrfs() got broken in commit
c8669749e37fe865c197c98d5671d9de176ff4dd, thus one could observe the
following backtrace:
Backtrace:
File "<snip>/poky/scripts/lib/wic/plugins/imager/direct_plugin.py", line 93, in do_create
creator.create()
File "<snip>/poky/scripts/lib/wic/imager/baseimager.py", line 159, in create
self._create()
File "<snip>/poky/scripts/lib/wic/imager/direct.py", line 290, in _create
self.bootimg_dir, self.kernel_dir, self.native_sysroot)
File "<snip>/poky/scripts/lib/wic/partition.py", line 146, in prepare
method(rootfs, oe_builddir, native_sysroot)
File "<snip>/poky/scripts/lib/wic/partition.py", line 325, in prepare_empty_partition_ext
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
NameError: name 'rootfs_size' is not defined
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Ed Bartosh
Christopher Larson
Joshua Lock
Mariano Lopez
Paul Eggleton
Ola x Nilsson
Alessio Igor Bogani
Patrick Ohly
Leonardo Sandoval
Dominic Sacré
Jiajie Hu
Stephano Cetola
Maciej Borzecki