| Age | Commit message (Collapse) | Author |
|---|
|
The help2man script is pretty useless to us. It requires to run the target
binary to extract help information which is not possible for any of our
cross compiled target binaries.
We're not interested in man pages for -cross/-native tools.
It therefore makes no sense to have this as a core build dependency.
This patch removes the dependeny and replaces it with a script
returning false. This will trigger autotool's missing utility
to use the copy of the man page included with the sources which
is what would already happen when we tried to run cross compiled
binaries anyway.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update the internal copy of setup_tmpdir in the oe-setup-rpmrepo script
to be the same as the one in the runqemu script.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On OpenSUSE within an X session, TMPDIR is set to the system temporary
directory (/tmp) which is incorrect for these scripts. Thus, change
runqemu and oe-setup-rpmrepo to use OE_TMPDIR from the external
environment rather than TMPDIR.
Fixes [YOCTO #1530]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the previous fix to this hook script (OE core revision
e7aae45414e4597e9244f86a81fbc940f73785c8) a start-of-line (^) marker was
missed, so if a commit had no Signed-off-by line but it contained an
inner patch that did, the inner patch was modified causing a "corrupt
patch" error.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
This refactors the way rootfs filenames are auto-detected when you
run the runqemu script without an explicit rootfs filename argument.
It allows the script to use rootfs files generated by hob, and when
there are mutliple rootfs files to choose from, it will pick the
most recently created one.
Fixes [YOCTO #1437].
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If sudo is used in the pseudo environment, as done in image tests when
the user hasn't pre-setup the tap device, ensure the LD_PRELOAD error
message isn't seen by the user.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commit 993672fa2739794a6dd0dbd7bb232fa60522b897 removed the BUILDDIR
support from runqueue which broke the imagetest-qemu integration. We now
therefore need to set TMPDIR and pass this through the environment to
ensure the runqueue script finds the right locations without running
bitbake directly.
This patch also adds a sleep to the qemu command in the error case so that
this remains on the screen for a period of time so the user can see errors
more easily.
This change unbreaks automated testing failures on the autobuilder.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the wrapper script needs to build pseudo before we can launch hob we need
to notify the user so they aren't shocked by the action of launching a GUI
and seeing a bunch of text whiz by on the console.
Fixes [YOCTO #1435]
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
hob now uses both a pre and post file, update the wrapper script to generate
and use both of these.
Addresses [YOCTO #1281]
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
The old manner of specifying custom options to QEMU in this script
using angle brackets was a frequent source of confusion. Meanwhile,
Otavio Salvador added a decent method of specifying custom kernel
boot options to this script. This patch documents the bootparams
option and adds a similar way of specifying custom QEMU options
using qemuparams="".
This fixes [YOCTO #1019]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #1438]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Because unfs boot mode is unstable for qemuppc, disable
it temporarily.
Signed-off-by: Liming Wang <liming.wang@windriver.com>
|
|
Because qemuppc has no graphic emulation, remove console=tty0
and make it run into 3 run level. This can reduce boot time
for qemuppc booting.
Signed-off-by: Liming Wang <liming.wang@windriver.com>
|
|
combo-layer's hook scripts are intended to modify patches as they pass
through; the default one adds a prefix with the component name and
a line with the component repo revision before the Signed-off-by;
however the script was also unintentionally modifying the contents of
patches *within* the patches passing through it, which resulted in
unexpected failures when the combo-layer script attempted to use
"git am" to apply them.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
On e.g. Debian libql is found under /usr/lib/x86_64-linux-gnu/libGL.so.
Use a wildcard to match different locations, as uname -i only return unknown on Debian.
Signed-off-by: Anders Darander <anders@chargestorm.se>
|
|
Decrease the similarity percentage needed to recognize a delete/add-pair followed by an edit,
as a rename.
This make reviewing patches easier.
Signed-off-by: Anders Darander <anders@chargestorm.se>
|
|
location of libGL has moved in ubuntu 11.10
so we look for it in the new locations
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
This small patch introduces a a very simple and basic way to script
the combo-layer conf file. With that a combo can be shared with no
need to change its config - associated to the use of environment
variables for example.
*Similar* to bitbake it considers every value starting with @ to be
a python script. So local_repo could be easily configured as:
[bitbake]
local_repo = @os.getenv("LOCAL_REPO_DIR") + "/bitbake"
or any more sophisticated python syntax.
This version updates the config file description so users can be
aware of.
Signed-off-by: Leandro Dorileo <ldorileo@gmail.com>
|
|
The previous fix for a bug in Ubuntu 10.04 readlink,
be2a2764d8ceb398d81714661e6f199c8b11946c, notified the user when a trailing
slash was used. As there is no semantic difference, simply remove any
trailing slashes and proceed without nagging the user.
See [YOCTO #671] for more details.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
This script has two problems today. First, it does 'ps -ef cmd'
in failure which real ps doesn't grok and busybox ps just ignores
the argument on. Switch that to 'ps -ef'. Second, busybox ps -o
doesn't understand cmd but does understand comm. Using comm lets
us simplify the test logic as well, so switch to that.
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
[YOCTO #671]
"readlink -f" in Ubuntu 10.04 is buggy: it doesn't ignore a trailing / (e.g.,
"readlink -f /tmp/non-existent-dir/" returns nothing, but according to
http://www.gnu.org/s/coreutils/manual/coreutils.pdf it should do that --
hence we get bug 671. It seems Ubuntu 10.10 or even later Ubuntu 11.04,
and other Linux distributions(e.g., Open Suse 11.4) haven't such an issue.
So I think we should detect this and ask Ubuntu 10.04 users to avoid supply
a path with trailing slash here.
Moreever, I also add the detection of non-existent path, e.g.,
source oe-init-build-env /non-existent-dir/build
can be detected and we'll print an error msg.
And, if we get errors in oe-buildenv-internal, we should stop the script
and shouldn't further run.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the grep regexp matches any occurance of
'TMPDIR=' but if you have another variable defined
e.g. OE_BUILD_TMPDIR=xxx then that gets picked up
too.
$ bitbake -e | grep TMPDIR=\"
TMPDIR="/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc"
OE_BUILD_TMPDIR="/home/kraj/work/angstrom/build/tmp-angstrom_2010_x"
So we become a bit more stringent and look for
line starting with TMPDIR
$ bitbake -e | grep ^TMPDIR=\"
TMPDIR="/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc"
make sure that it greps
only TMPDIR=xxx occurance and not values of other variables
whose names happens to end with TMPDIR
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This helper function and associated header will allow us to
resolve two/three header files that conflict due to contents
that change based on wordsize and ABI.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Use --keep-cr option to "git am" or otherwise we lose carriage returns
which can be important for patches against files that use CRs.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Invoking runqemu outside of the build directory for an
in-tree setup results in an empty TMPDIR because bitbake -e
cannot be run to find it.
A symptom of this problem is running runqemu and getting the
following error:
Error: Unable to find tunctl binary in <directory>
Catch this case and report the error to the user.
This fixes [YOCTO #1278]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
test_build_time.sh is a bash script intended to be used in conjunction
with "git bisect run" in order to find regressions in build time, however
it can also be used independently. It cleans out the build output
directories, runs a specified worker script (an example is
test_build_time_worker.sh) under TIME(1), logs the results, and returns
a value telling "git bisect run" whether the build time is good (under
the specified threshold) or bad (over it).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
These are new variable names in oe-core
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Unless the user specifies -c, don't pull in any email addresses from the
patches in the series. This avoids having to remove the email addresses from
patches being pulled in from upstream. If you want the email addresses on the
patch to be added, continue to use the -c option as before.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This ensures any configuration changes made in the GUI are only set when
using hob.
The default hob.local.conf is generated with a line which adds image_types
to INHERITS so that the GUI can introspect the available FSTYPES.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
The bash string operation ${BB##*0} was greedy and in addition to converting
"02" to "2", also converted "20" to "", causing all builds for a BB value ending
in 0 to run with BB_NUMBER_THREADS=1.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bb-matrix.sh script will run a bitbake command, building core-image-minimal
by default, for various combinations of BB_NUMBER_THREADS and PARALLEL_MAKE. It
records all relevant metrics of the TIME(1) command for each combination in a
data file.
The bb-matrix-plot.sh script can be used to visualize each of these metrics via
a 3d surface plot, either solid surface or wireframe with a value-map
projection on the XY plane.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch adds the script "combo-layer" to manipulate combo layer
repos. A combo layer repo is a repo containing multiple component
repos, e.g. oe-core, bitbake, BSP repos. The combo layer repo needs to
be updated by syncing with the component repo upstream. This script
is written to assist the combo layer handling.
The combo layer tool provides three functionalities:
- init: when the combo layer repo and component repo does not exist,
init will "git init" the combo layer repo, and also "git clone" the
component repos
- update: combo layer tool will pull the latest commit from component
repo upstream, and apply the commits since last update commit to the
combo repo. If the user specifies interactive mode(--interactive),
they can edit the patch list to select which commits to apply.
- splitpatch: split the combo repo commit into separate patches per
component repo, to facilitate upstream submission.
Combo layer tool uses a config file to define the component repo info.
Please check the combo-layer.conf.example for a detailed explanation
of the config file fields.
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
|
|
other example targets
This takes into account some feedback from Yocto's tech writer
as mentioned in the bugzilla.
[YOCTO #1182]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As BB_NUMBER_THREADS is already whitelisted, it is consistent to
also allow PARALLEL_MAKE to be overridden via the environment. This
also simplifies performance testing where multiple combinations of
those two variables are a natural thing to do.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make sure we're not using python v3.x. This check can't go into
sanity.bbclass because bitbake's source code doesn't even pass
parsing stage when used with python v3, so we catch it here so we
can offer a meaningful error message.
This fixes bug [YOCTO #1128]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
The old versions of cvs and iptables may meet compile error under some architecture
- cvs 1.11.23 fails on x86-64 host and iptables 1.4.9 fails on arm host. Update them
to latest version could solve these build error.
Meanwhile, 240s timeout is set for sudoku becasue 120s is not enough to finish
compile.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
|
|
During native recipe processing we want to intercept any calls to chown
and do nothing. This prevents errors and allows the same recipes to be
used for both native and target recipes.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Python was missing a lot of debug information. Switch to use the default
-dbg package. Also add some additional debug information to the -dbg package.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
The old standard of using /home/anders/openembedded-core/build/tmp as TMPDIR do not work any longer,
as - is appended to the real TMPDIR. Thus, always take TMPDIR from
bitbake, unless TMPDIR is set in the environment.
Signed-off-by: Anders Darander <anders@chargestorm.se>
|
|
version < 1.24
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we can't find the URL, tell the user how to correct the issue.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
The existing REMOTE_URL and REMOTE_REPO parsing made assumptions regarding
the git URL format used for the known repository types. In fact, both of
these ssh URL formats are valid for all the known repositories. Specifically:
ssh://git@server/repository/path
git@server:repository/path
Generalize the parsing to work with each of these for all push URLs matching
*@*. Tested with the following URLs:
ssh://git@git.pokylinux.org/poky-contrib
ssh://git@git.pokylinux.org/poky-contrib.git
git@git.pokylinux.org:poky-contrib
git@git.pokylinux.org:poky-contrib.git
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
Richard Purdie
Paul Eggleton
Scott Garman
Joshua Lock
Liming Wang
Otavio Salvador
Anders Darander
Khem Raj
Leandro Dorileo
Dexuan Cui
Tom Rini
Mark Hatle
Darren Hart
Robert P. J. Day
Yu Ke
Nitin A Kamble
Jiajun Xu
Martin Jansa