| Age | Commit message (Collapse) | Author |
|---|
|
When multilib is enabled and both udev-hwdb and ${MLPREFIX}udev-hwdb are
installed to image, it fails to run one of their postinstall scripts
that they both call ${base_bindir}/udevadm with same user mode qemu.
Duplicate udevadm and add postinst-intercept update_udev_hwdb to fix the
failures.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Postinstall script update_gtk_immodules_cache calls
${bindir}/gtk-query-immodules-${version}. When multilib is enabled, both
packages foo and lib32-foo call ${bindir}/gtk-query-immodules-${version}
and one of them will fail to run obviously.
Duplicate install files gtk-query-immodules-${version} to ${libexecdir}
with ${MLPREFIX}. And update update_gtk_immodules_cache calls proper
binary.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Packages which inherit fontcache.bbclass call postinstall script
update_font_cache. And in update_font_cache, it calls ${bindir}/fc-cache
by qemuwrapper. When multilib is enabled, both packages foo and lib32-foo
will call ${bindir}/fc-cache and one of them will fail to run obviously.
Duplicate install file fc-cache to ${libexecdir} with ${MLPREFIX} and
call proper fc-cache in update_font_cache.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously only one global variant of the script was created,
which caused numerous issues:
1) multilib was not properly supported due to multilib variants each
needing their own version of the qemu binary and library paths to be set
2) nativesdk was not properly supported for the same reason
This patch also moves setting LD_LIBRARY_PATH directly into the
recipe, as passing it down from other recipes did not work when
said recipes were allarch, and adjusts calls to qemuwrapper from
postinst-intercepts, so that its correct variant is selected.
Also, the various qemu fallbacks in qemuwrapper script are all removed,
as they are no longer necessary.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
mechanism
This has the following benefits:
- consistent with how the other caches are created into target rootfs
- only runs once per package manager transaction, instead of once per every immodule package
- correctly postpones to first boot if qemu is not working; from postinst itself
this would've required special arrangements to avoid what is now a do_rootfs failure.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows postinsts scripts to explicitly request a deferral to first boot
(by calling 'postinst_intercept delay_to_first_boot') instead of 'exit 1' which
should be used only to indicate actual script failures.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Only change the ownership of ${libdir}/gio/modules/giomodule.cache if
it exists.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
update_gio_module_cache intercept creates file:
$D${libdir}/gio/modules/giomodule.cache
Change ownership of this file to root:root to avoid user contamination
by host.
Signed-off-by: Abdur Rehman <abdur_rehman@mentor.com>
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The new class uses gio-querymodules tool on postinst and postrm.
This regenerates the module cache which is useful to avoid loading
modules that are not needed at runtime: If a Gio module is not
listed in the cache file it will always get loaded.
* Add a postinst-intercept 'gio-module-cache': it runs
gio-querymodules using qemuwrapper. This is required because the tool
actually loads the modules to generate the cache.
* Add a gio-module-cache class that adds postinstall and postrm
scripts. In the sysroot population case use the new intercept.
* Inherit the new class in glib-2.0, glib-networking and gconf.
Fixes [YOCTO #9241].
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a postinst has a problem (say, qemu crashes) and set -e isn't in operation,
the only mention of the problem is a single line in the rootfs log that doesn't
trigger any warnings.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
By default fc-cache will scan both system and user directories, which means it
attempts to scan $HOME/.fonts. As this is the build host's idea of $HOME this
generally doesn't exist, and causes fc-cache to exit with a failure.
Solve this by passing --system-only so that fc-cache will only scan system
directories, as is appropriate for a rootfs-time invocation.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The intercept runs against the native sysroot so we need to pass it
the native libdir instead of the target libdir, as otherwise it will
use target paths (such as lib64) in the native sysroot.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of expecting that the calling postinst has exported
STAGING_LIBDIR_NATIVE (which will get set to the sysroot at package build time
and may not be correct if sstate is used), use the new STAGING_DIR_NATIVE that
is exported by rootfs.py.
[ YOCTO #8547 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* this can be useful for passing extra parameters, pass
-v by default to see what's going on in do_rootfs
* we need to use this for extra parameter we implemented
in fontconfig:
--ignore-mtime always use cache file regardless of font directory mtime
because the checksum of fontcache generated in do_rootfs
doesn't match with /usr/share/fonts directory as seen on
target device causing fontconfig to re-create the cache
when fontconfig is used for first time or worse create
new cache in every user's home directory when /usr/
filesystem is read only and cache cannot be updated.
Running FC_DEBUG=16 fc-cache -v on such device shows:
FcCacheTimeValid dir "/usr/share/fonts" cache checksum 1441207803 dir checksum 1441206149
* my guess is that the checksum is different, because pseudo
(which is unloaded when running qemuwrapper) or because some
influence of running the rootfs under qemu.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If for example gdk-pixbuf and lib32-gdk-pixbuf are in an image then only one
${bindir}/gdk-pixbuf-query-loaders will be installed, so only one variant will
actually be usable.
Solve this by moving gdk-pixbuf-query-loaders into ${libdir} as it's intimately
tied to the library and rarely directly invoked by the user, and update the
callers to use the right path.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* trying to pass foo="a b" through postinst_intercept ends
with the actual script header to containing:
b
foo=a
which fails because "b" command doesn't exist.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Avoid useless subshell.
There's no word splitting in variable assignment.
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The file ownership of the cache files in /var/cache/fontconfig needs to
be set to root:root otherwise it inherits the user and group id of the
build user.
[YOCTO #7411]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Pass GDK_PIXBUF_FATAL_LOADER to the sstate postinst and intercept so that any
problems are flagged as errors instead of being silently ignored.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The redirection was necessary with the old bash code because the log
checking routine was searching for error strings in the log and abort
the build in case failures occured. With the new python code,
redirecting the intercept stderr is no longer necessary. This also makes
the intercept hooks easier to debug.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
When using multilib, the hooks for lib32/lib64 must be different because
the libdir/base_libdir point to different locations. Postinstalls
calling postint_intercept script must pass the mlprefix in the 3rd
argument.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Postinstalls that use qemu are throwing a segmentation fault when
building for qemux86-64 on a 64bit host (it might also happen for
qemux86 if building on a 32bit host but I didn't test). It looks like
qemu looks for ld.so.cache which is not found because it is generated
after rootfs_(rpm|ipk|deb)_do_rootfs is called and then it tries to load
libraries from the default paths (which are the host's). In order to
avoid this, pass the LD_LIBRARY_PATH explicitly to the target's dynamic
loader.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The intercept scripts fail to run on 32 bit hosts. Apparently, the
current approach worked on 64 bit hosts due to the larger virtual address
space (probably). On 32 bit hosts, however, calling the target binary like:
qemu-arm ld-linux.so --library-path /lib:/usr/lib arm_binary
fails with:
arm_binary: error while loading shared libraries: arm_binary: failed to
map segment from shared object: Operation not permitted
When run like this, qemu-arm fails to map the arm_binary executable in
memory because it's hitting the lower limit of
/proc/sys/vm/mmap_min_addr. That's because it loads the
ld-linux.so binary successfully, taking into account mmap_min_addr, runs
it, and then ld-linux.so will map the arm_binary at a fixed address but this
will fail because it is below mmap_min_addr. The qemu's guest base probing,
apparently, doesn't work fine when a program runs inside other.
One way around this would be to set mmap_min_addr to 0 (on recent
distributions is set to 65536 to avoid "kernel NULL pointer dereference"
defects) but this approach is not safe.
The other way is to call the binary directly but providing qemu with a
prefix (-L option) in order to find the elf interpreter correctly. This
way, both the target binary and dynamic loader are mapped into memory
under qemu's control and, only after, the dynamic loader is started.
[YOCTO #4179]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The scripts/postinst-intercepts will contain all postinstall hooks that
we need to run after all packages have been installed.
If one wants to install such a postinst hook, all it needs to do is put
the hook in this directory and, from the package postinstall scriptlet,
call:
postinst_intercept <hook_name> <package_name> <var1=...> ...
This will, practically, add the package_name in the list of packages
that need the hook to run and, also, set any variables that would be
needed in the hook. For example, variables like ${libdir}, ${bindir},
etc. that might depend on distribution can be passed on to the script in
this way.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Kai Kang
Alexander Kanavin
Peter Kjellerstedt
Abdur Rehman
Jussi Kukkonen
Ross Burton
Martin Jansa
Matthieu Crapet
Jonathan Liu
Laurentiu Palcu