| Age | Commit message (Collapse) | Author |
|---|
|
allow wic to list and search for kickstart file in .wks.in extension.
basename show by wic list images to fully exclude extension.
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Printing the lack of a test is not necessary (per feedback). Remove
this from the template to quieten it.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the creation of test case configuration file based on user inputs.
Where this testcase configuration file will be used by the the manual
execution to run selected test cases for a module rather than compulsory
run all test cases in manual json file.
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, the code will sum all of the different machine results into a
single report of the tests results. This can lead to confusion as to
which machine may be experiencing issues. Modify the code to store the
results in a per machine basis and report them accordingly.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add new source parameter label to allow custom boot.conf/grub.cfg label,
so far it's hardcoded to "Boot".
Default label to "Boot" for systemd-boot and blank for grub-efi when source
parameter label are not set.
Signed-off-by: Chee Yang Lee <chee.yang.lee at intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
volume name should refer to --label in .wks.
Replace the hardcoded volume name with label.
set "ESP" as default name when no lable specified.
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds SPDX license headers in place of the wide assortment of things
currently in our script headers. We default to GPL-2.0-only except for the
oeqa code where it was clearly submitted and marked as MIT on the most part
or some scripts which had the "or later" GPL versioning.
The patch also drops other obsolete bits of file headers where they were
encoountered such as editor modelines, obsolete maintainer information or
the phrase "All rights reserved" which is now obsolete and not required in
copyright headers (in this case its actually confusing for licensing as all
rights were not reserved).
More work is needed for OE-Core but this takes care of the bulk of the scripts
and meta/lib directories.
The top level LICENSE files are tweaked to match the new structure and the
SPDX naming.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds an option to dump all the ptest logs to individual files in a
specified directory. If multiple test runs are present, the
'--prepend-run' argument will create separate directories for each test
run under the target directory and put the logs there to prevent each
test run from clobbering the others.
[YOCTO #13331]
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If attempting to find a fixed SRCREV fails because the directory doesn't exit,
avoid failing with:
Traceback (most recent call last):
File "/home/vagrant/poky/scripts/recipetool", line 121, in <module>
ret = main()
File "/home/vagrant/poky/scripts/recipetool", line 110, in main
ret = args.func(args)
File "/home/vagrant/poky/scripts/lib/recipetool/create.py", line 707, in create_recipe
srcrev = stdout.rstrip()
UnboundLocalError: local variable 'stdout' referenced before assignment
Fixes: 000480c42797 ("recipetool / devtool: set a fixed SRCREV by default when fetching from git")
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current manualexecution required user to exceute all test cases defined inside a "modulename.json" file in oeqa/manual
There are cases when all test cases all not required to run for a module on specific DUT.
Enable manualexecution to have the optional feature where it will use pre-defined json format test case configuration file
where user will be able to select test cases from the "modulename.json" instead of running all of them. This will help
in reducing testing time and reporting unneccesary skip or failures.
Example pre-defined json format test case configuration file (for build-applince):
{
"testcases" : [
"build-appliance.build-appliance.Create_core-image-sato-sdk_using_build_appliance",
"build-appliance.build-appliance.Build_a_image_without_error_(added_recipe)"
]
}
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit f7dfb4d43247d3c13a4e0a3853007d63b9512b83.
FAT16 volumes do not have a minimum size of 8250 blocks
(== slightly over 4MB). Exhibit A: floppy disks.
The original commit message suggests this was a workaround for a bug in
parted - in which case we should fix it there, or use the wic
`--fixed-size` option to pass down an enforced minimum from a more
context-aware point in the callstack.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix AttributeError: module 'urllib' has no attribute 'request' when
using remote http urls.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds a subcommand for dumping various logs from test results
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds support for resulttool to load JSON files directly from a http://
or https:// URL
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove duplicate codes. Replace unnecessary class variables with
local variables. Rename variables and arguments with simple and
standard name.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When I use recipetool to add a new recipe, it says:
[snip]
sys.exit(14)
NameError: name 'sys' is not defined
[snip]
Signed-off-by: Lei Yang <Lei.Yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the creation of configuration option file based on user inputs.
Where this configuration option file will be used by the the manual
execution to display options for configuration rather than user
need to inputs configuration manually.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current manualexecution required user to input configuration manually
where there were inconsistent inputs and human typo issues.
Enable manualexecution to have the optional feature where it
will use pre-compiled configuration options file where user will
be able to select configuration from the pre-compiled list instead
of manual key-in the configuration. This will eliminate human error.
Expect the pre-compiled configuration options file in json format below
{
"bsps-hw": {
"IMAGE_BASENAME": {
"1": "core-image-sato-sdk"
},
"MACHINE": {
"1": "beaglebone-yocto",
"2": "edgerouter",
"3": "mpc8315e-rdb",
"4": "genericx86",
"5": "genericx86-64"
}
},
"bsps-qemu": {
"IMAGE_BASENAME": {
"1": "core-image-sato-sdk"
},
"MACHINE": {
"1": "qemuarm",
"2": "qemuarm64",
"3": "qemumips",
"4": "qemumips64",
"5": "qemuppc",
"6": "qemux86",
"7": "qemux86-64"
}
}
}
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The cml1 and ccmake bbclasses generate configuration fragment source
files that must be exported from the WORKDIR as a source file to be
preserved across builds. This change adds detection of the current
recipes inherited classes and for cml1 and ccmake classes checks for the
specific generated configuration fragment files. These files are then
exported by devtool and included as SRC_URI files from within the target
layer.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Simplify and removed unnecessary codes.
Refactor to allow pythonic loop.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the manual execution display step by sorting
the step as string, where steps were not being sorted
correctly when there are more than 9 steps.
Fixed the step sorting by sorting step as integer.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current manualexecution required pressing enter button to show each step
information, where this was wasting execution time. Enable display
full steps without needing to any press enter button.
Signed-off-by: Mazliana <mazliana.mohamad@intel.com>
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current input checking does not match the standard input practiced
by QA team. Change the input checking to match the standard
input practiced by the QA team.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than simply discarding the ptest data, change the code to discard
it when writing out the new testresult files, or optionally either preserve
it, or write it as seperate discrete logs.
This means the autobuilder should start writing out individual ptest log
files as well as allowing ueers to extract these manually.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Store operations using a single file as a source weren't working as the os.walk
command didn't like being given a single file. Fix the store operation to
work for single files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On some hosts the wic.Wic2.test_wic_cp_ext selftest was failing as files weren't
being copied into the rootfs with "wic cp". This was due to a bug added by:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=89d4a8df074598cfb3a76e41db7c45d845afd961
where there should be a second newline added at the end of the expression due
to the difference in the way echo -e and printf behave.
[YOCTO #13237]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Devtool creates a git repository for extracted sources in a temporary
directory and then moves it to a final destination after patching is
done. Unfortunately devtool is not aware that some of its git operations
may have caused git garbage collector to start in background. If timing
is just right a repository move fails because GC is removing git objects
while they are being moved.
The issue was hit on Krogoth release, but the code that moves created
git repository is still the same.
Disable gc.autodetach to make GC run synchronously and block git until
it is done.
Traceback (most recent call last):
File "<snip>/openembedded-core/scripts/devtool", line 342, in <module>
ret = main()
File "<snip>/openembedded-core/scripts/devtool", line 329, in main
ret = args.func(args, config, basepath, workspace)
File "<snip>/openembedded-core/scripts/lib/devtool/standard.py", line 352, in extract
initial_rev = _extract_source(srctree, args.keep_temp, args.branch, False, rd)
File "<snip>/openembedded-core/scripts/lib/devtool/standard.py", line 644, in _extract_source
shutil.move(srcsubdir, srctree)
File "/usr/lib/python2.7/shutil.py", line 299, in move
copytree(src, real_dst, symlinks=True)
File "/usr/lib/python2.7/shutil.py", line 208, in copytree
raise Error, errors
Error: [('/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/5e', '<snip>/build/grpc/grpc_src/.git/objects/5e', "[Errno 2] No such file or directory: '/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/5e'"), ('/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/57', '<snip>/build/grpc/grpc_src/.git/objects/57', "[Errno 2] No such file or directory: '/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/57'"), many git objects ... ]
Signed-off-by: Taras Kondratiuk <takondra@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We found that manualexecution does not capture test suite values
correctly if there are more than one test suite in test cases.
After verification has made we found out we should retrieved
full test cases value <test_module.test_suite.test_case> from
oeqa/manual/ json file rather than split it them into new
variables test_suite and test_cases.
Signed-off-by: Mazliana <mazliana.mohamad@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable roll-up all test results belong to a commit
and to provide a roll-up report.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_patch rule of SDK's workspace/appends/linux-*.bbhappend may fail if script are not written in Python
that was the case with Phytec's BSP, the fix was to replace the do_patch rule with :
do_patch[noexec]="1" when the file was generated in scripts/lib/devtool/standard.py
Signed-off-by: Yann CARDAILLAC <yann.cardaillac@smile.fr>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To enable store for testresults.json file from manualexecution,
add layers metadata to configuration and add "manual" map to
resultutils.store_map.
To enable regression for manual, add "manual" map to
resultutils.regression_map. Also added compulsory configurations
('MACHINE', 'IMAGE_BASENAME') to manualexecution.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than recreating handlers and forcing them, iterate over the handlers
and enable color on ones we can handle. This makes it easier to handle color
properly when we introduce the bb.msg default log filters.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows '--sourceparams key1=val1=val11,key2=val2'.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sorted regression results to provide friendly viewing of report.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ptest suites with no results don't show up on the reports even though we have
a duration for them. Fix this so the fact they report no tests is visible.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently some older results files cause the code to give tracebacks.
Handle these missing sections more cleanly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently we cant store results if the results files span multiple
different build revisons. Remove this limitation by iterating.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the use of an alternate SSH executable for deploy-target and
undeploy-target. The command can be specified with -e / --ssh-exec.
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a combined patch of the various tweaks and improvements I
made to resulttool:
* Avoid subprocess.run() as its a python 3.6 feature and we
have autobuilder workers with 3.5.
* Avoid python keywords as variable names
* Simplify dict accesses using .get()
* Rename resultsutils -> resultutils to match the resultstool ->
resulttool rename
* Formalised the handling of "file_name" to "TESTSERIES" which the code
will now add into the json configuration data if its not present, based
on the directory name.
* When we don't have failed test cases, print something saying so
instead of an empty table
* Tweak the table headers in the report to be more readable (reference
"Test Series" instead if file_id and ID instead of results_id)
* Improve/simplify the max string length handling
* Merge the counts and percentage data into one table in the report
since printing two reports of the same data confuses the user
* Removed the confusing header in the regression report
* Show matches, then regressions, then unmatched runs in the regression
report, also remove chatting unneeded output
* Try harder to "pair" up matching configurations to reduce noise in
the regressions report
* Abstracted the "mapping" table concept used to pairing in the
regression code to general code in resultutils
* Created multiple mappings for results analysis, results storage and
'flattening' results data in a merge
* Simplify the merge command to take a source and a destination,
letting the destination be a directory or a file, removing the need for
an output directory parameter
* Add the 'IMAGE_PKGTYPE' and 'DISTRO' config options to the regression
mappings
* Have the store command place the testresults files in a layout from
the mapping, making commits into the git repo for results storage more
useful for simple comparison purposes
* Set the oe-git-archive tag format appropriately for oeqa results
storage (and simplify the commit messages closer to their defaults)
* Fix oe-git-archive to use the commit/branch data from the results file
* Cleaned up the command option help to match other changes
* Follow the model of git branch/tag processing used by oe-build-perf-report
and use that to read the data using git show to avoid branch change
* Add ptest summary to the report command
* Update the tests to match the above changes
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Integrated “manualexecution” operation to resulttool scripts.
Manual execution script is a helper script to execute all manual
test cases in baseline command, which consists of user guideline
steps and the expected results. The last step will ask user to
provide their input to execute result. The input options are
passed/failed/blocked/skipped status. The result given will be
written in testresults.json including log error from the user
input and configuration if there is any.The output test result
for json file is created by using OEQA library.
The configuration part is manually key-in by the user. The system
allow user to specify how many configuration they want to add and
they need to define the required configuration name and value pair.
In QA perspective, "configuration" means the test environments and
parameters used during QA setup before testing can be carry out.
Example of configurations: image used for boot up, host machine
distro used, poky configurations, etc.
The purpose of adding the configuration is to standardize the
output test result format between automation and manual execution.
To use these scripts, first source oe environment, then run the
entry point script to look for help.
$ resulttool
To execute manual test cases, execute the below
$ resulttool manualexecution <manualjsonfile>
By default testresults.json store in <build_dir>/tmp/log/manual/
[YOCTO #12651]
Signed-off-by: Mazliana <mazliana.mohamad@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OEQA outputs test results into json files and these files were
archived by Autobuilder during QA releases. Example: each oe-selftest
run by Autobuilder for different host distro generate a
testresults.json file.
These scripts were developed as a test result tools to manage
these testresults.json file.
Using the "store" operation, user can store multiple testresults.json
files as well as the pre-configured directories used to hold those files.
Using the "merge" operation, user can merge multiple testresults.json
files to a target file.
Using the "report" operation, user can view the test result summary
for all available testresults.json files inside a ordinary directory
or a git repository.
Using the "regression-file" operation, user can perform regression
analysis on testresults.json files specified. Using the "regression-dir"
and "regression-git" operations, user can perform regression analysis
on directory and git accordingly.
These resulttool operations expect the testresults.json file to use
the json format below.
{
"<testresult_1>": {
"configuration": {
"<config_name_1>": "<config_value_1>",
"<config_name_2>": "<config_value_2>",
...
"<config_name_n>": "<config_value_n>",
},
"result": {
"<testcase_namespace_1>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
"<testcase_namespace_2>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
...
"<testcase_namespace_n>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
}
},
...
"<testresult_n>": {
"configuration": {
"<config_name_1>": "<config_value_1>",
"<config_name_2>": "<config_value_2>",
...
"<config_name_n>": "<config_value_n>",
},
"result": {
"<testcase_namespace_1>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
"<testcase_namespace_2>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
...
"<testcase_namespace_n>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
}
},
}
To use these scripts, first source oe environment, then run the
entry point script to look for help.
$ resulttool
To store test result from oeqa automated tests, execute the below
$ resulttool store <source_dir> <git_branch>
To merge multiple testresults.json files, execute the below
$ resulttool merge <base_result_file> <target_result_file>
To report test report, execute the below
$ resulttool report <source_dir>
To perform regression file analysis, execute the below
$ resulttool regression-file <base_result_file> <target_result_file>
To perform regression dir analysis, execute the below
$ resulttool regression-dir <base_result_dir> <target_result_dir>
To perform regression git analysis, execute the below
$ resulttool regression-git <source_dir> <base_branch> <target_branch>
[YOCTO# 13012]
[YOCTO# 12654]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Just stating the recipe counts are different isn't helpful, showing
the differences makes it much easier to understand what changed.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OE-Core rev: a88bcbae850a2e6d182291d3f8e167aabdbe4842 broke the ability
to find parted as it may be in sbin which is not in PATH for some users
on some distros.
Iterate on the original patch to fix this and also fix the original problem.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Load self.paths from environment variable and
if it fails, fall back to hardcoded list.
This is required for users that would need to load
different e2fsprogs binaries if their system's ones
are not recent enought
Signed-off-by: William Bourque <wbourque@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Python subprocess' shell=True defaults to /bin/sh[1][2], which
often refers to a POSIX-compliant shell. As the -e flag is
not defined in the POSIX standard[3], some shells may
interpret "-e" as the first argument to the echo command,
causing the rest of the command line to fail.
In this particular case, "echo -e 'cd {}'" is interpreted
as "-e cd {}", which causes the first line of the command
to fail, and causing cp to always place the source file
in the filesystem's root.
Replacing "echo -e" for a printf command makes this
more portable.
This issue only affects "wic cp" for ext* filesystems.
[1] https://docs.python.org/2/library/subprocess.html
[2] https://docs.python.org/3/library/subprocess.html
[3] http://pubs.opengroup.org/onlinepubs/9699919799
Signed-off-by: Leonardo Augusto <leobsd@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Chee Yang Lee
Jon Mason
sangeeta jain
Richard Purdie
Joshua Watt
Alex Kiernan
Armin Kuster
Angus Lees
Yeoh Ee Peng
Lei Yang
Nathan Rossi
Taras Kondratiuk
Mazliana
Yann CARDAILLAC
Christopher Larson
Jan Kiszka
Olaf Mandel
William Bourque
Leonardo Augusto