| Age | Commit message (Collapse) | Author |
|---|
|
In previous implementation, a UnicodeDecodeError exception will be
raised if multi-byte encoded characters are printed by the subprocess.
As an example, the following command will fail in an en_US.UTF-8
environment because wget quotes its saving destination with '‘'(0xE2
0x80 0x98), while just the first byte is provided for decoding:
devtool add recipe http://example.com/source.tar.xz
The patch fixes the issue by avoiding such kind of incomplete decoding.
(From OE-Core rev: 1875ea92546d23abcab1b40b562477a0016f712d)
Signed-off-by: Jiajie Hu <jiajie.hu@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The hello-mod recipe is unusual in that it has only local files in
SRC_URI and builds these out of ${WORKDIR}. When you use devtool modify
on it, devtool puts all of those files in an "oe-local-files"
subdirectory of the source tree, which is not ${S} (or ${B}) any more
and thus building the recipe afterwards fails. It's a bit of a hack, but
symlink the files in oe-local-files into the source tree (and commit the
symlinks with an ignored commit so that the repo is clean) to work
around the problem. We only do this at time of extraction, so any files
added to or removed from oe-local-files after that won't be handled, but
I think there's a limit to how far we should go to support these kinds
of recipes - ultimately they are anomalies.
I initially tried a hacky workaround where I set effectively set B =
"${WORKDIR}" and that allowed it to build, but other things such as the
LIC_FILES_CHKSUM checks still broke because they expected to find files
in ${S}. Another hack where I set the sourcetree to point to the
oe-local-files subdirectory works for hello-mod but not for makedevs
since whilst that is similar, unlike hello-mod it does in fact have
files in the source tree (since it has a patch that adds COPYING) and
thus the same issue occurred.
Also tweak one of the tests that tries devtool modify / update-recipe on
the makedevs recipe to try building it since that would have caught this
issue.
Fixes [YOCTO #10616].
(From OE-Core rev: 857c06d6a1d161bf5a01311d07758bd4241929a3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The .deb import feature did not import postinst, postrm, preinst, or
prerm functions. This change checks to see if those files exist, and
if so, adds the appropriate functions.
[ YOCTO #10421 ]
(From OE-Core rev: ebb73aa6ad920bfd6a23f8c20105d6bcf07dd3d5)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you have a patch remotely fetched in a recipe (e.g. from an http
server) that needs updating then add a local version and substitute the
entry in SRC_URI to point to it.
One can argue about how desirable it is to be modifying patches fetched
in this way, but then one can argue about how desirable it is to have
such patches in the recipe in the first place - and in any case if
devtool update-recipe is to correctly transfer changes to such patches
made in the git repository within the source tree to the recipe then
there isn't much choice but to do it this way.
(From OE-Core rev: a19c26cc78a181f9dd2706dd42e7e450d7ad4082)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is possible to use gzip or bzip2 to compress patches and still refer
to them in compressed form in the SRC_URI value within a recipe. If you
run "devtool modify" on such a recipe, make changes to the commit for
the patch and then run devtool update-recipe, we need to correctly
associate the commit back to the compressed patch file and re-compress
the patch, neither of which we were doing previously.
Additionally, add an oe-selftest test to ensure this doesn't regress in
future.
Fixes [YOCTO #8278].
(From OE-Core rev: e47d21624dfec6f71742b837e91da553f18a28c5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As of the move to Python 3 and the fixes we applied at that time,
bb.process.run() will return a byte array of length 0 rather than an
empty string if the output is empty. That may be a bug that we should
fix, but for now it's easiest to just check the result here before
treating it as a string. This fixes running "devtool update-recipe" or
"devtool finish" on a recipe which has no source tree, for example
initramfs-framework.
Fixes [YOCTO #10563].
(From OE-Core rev: 66bf6978fc807ecc422fb6b6328f68bc3406cf15)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
xf86-input-libinput is RRECOMMENDed by xserver-xorg, these
legacy drivers are not needed.
(From meta-yocto rev: 715f72d7842b4a789a78e7889b2f01cd41f02df8)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix typos in documentation of Image.add_partition() and
Image.__format_disks().
(From OE-Core rev: f5bf7bf253224912c66bab89f48ff63a73e0d698)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We explicitly check for --fstype if no source was provided for a
partition. However, this was not the case for rootfs partitions. Make
sure to raise an error if filesystem was left unspecified when preparing
a rootfs partition image.
(From OE-Core rev: b8c35fcad57810a87aa25ebeb533adf286eed565)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It seems that prepare_empty_partition_ext() and
prepare_empty_partition_btrfs() got broken in commit
c8669749e37fe865c197c98d5671d9de176ff4dd, thus one could observe the
following backtrace:
Backtrace:
File "<snip>/poky/scripts/lib/wic/plugins/imager/direct_plugin.py", line 93, in do_create
creator.create()
File "<snip>/poky/scripts/lib/wic/imager/baseimager.py", line 159, in create
self._create()
File "<snip>/poky/scripts/lib/wic/imager/direct.py", line 290, in _create
self.bootimg_dir, self.kernel_dir, self.native_sysroot)
File "<snip>/poky/scripts/lib/wic/partition.py", line 146, in prepare
method(rootfs, oe_builddir, native_sysroot)
File "<snip>/poky/scripts/lib/wic/partition.py", line 325, in prepare_empty_partition_ext
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
NameError: name 'rootfs_size' is not defined
(From OE-Core rev: 0bf686739a5e8a1193f5be5aa60afbf2ea1e5074)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The size field of Partition class is expected to be an integer and ought
to be set inside prepare_*() method. Make sure that this is always the
case.
(From OE-Core rev: a37838f995ae642b0b8bdd47a605a264fb3bf200)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Root device name in systemd-bootdisk.wks is 'sda'. This can cause
images, produced using this wks to refuse booting if real device
name is not 'sda'. For example, when booting MinnowBoard MAX from
MicroSD card the boot process stucks with this message on the boot
console output: Waiting for root device /dev/sda2...
This happens because real device name of MicroSD card on this device
is mmcblk1.
Used --use-uuid option for root partition. This should make
wic to put partiion UUID instead of device name into kernel command
line.
[YOCTO #10485]
(From OE-Core rev: 5b73d5f484cc844affe91ec19d881d42e187f30c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When you run devtool add on a source tree we attempt to figure out the
correct name and version for the recipe. However, despite our best
efforts, sometimes the name and/or version we come up with isn't
correct, and the only way to remedy that up until now was to reset the
recipe, delete the source tree and start again, specifying the name this
time. To avoid this slightly painful procedure, add a "rename"
subcommand that lets you rename the recipe and/or change the version.
(From OE-Core rev: 9303d8055c45a0f6af295d70a6f6a8b9d8d8a7c9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
recipetool sets the LICENSE value based on licenses detected from the
source tree. If there are multiple licenses then they were being
separated by spaces, but this isn't actually legal formatting and if
you're using "devtool add" you get a warning printed when devtool
parses the recipe internally.
Earlier I had made a conscious decision to do it this way since it's up
to the user to figure out whether the multiple licenses should all apply
(in which case they'd be separated with &) or if there is a choice of
license (in which case | is the correct separator). However, I've come
to the conclusion that we can just default to & and then the ugly
warning goes away, and it's the safest alternative of the two (and most
likely to be correct, since it's more common to have a codebase which is
made up of code with different licenses, i.e. all of them apply to the
combined work).
I've tweaked the comment that we add to the recipe to explicitly state
that we've used & and that the user needs to change that if that's not
accurate.
Fixes [YOCTO #10413].
(From OE-Core rev: ecac6aee8cf3313350b58c21012bcd67cfb915e4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you run devtool finish to move a recipe created in the workspace by
devtool add or devtool upgrade to a layer, and that layer is not
currently included in bblayers.conf (perhaps unintentionally), then the
recipe will no longer be visible to bitbake. In this scenario, show a
warning so that the user isn't surprised by the recipe "going missing".
(From OE-Core rev: 4da8a58e2997db4f24ae0cac0ba27259d7857a05)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If devtool finish is run on a recipe where the recipe file itself is in
the workspace (e.g. where devtool add / devtool upgrade has been used)
and the specified destination layer is not in bblayers.conf, then we
need to avoid running bitbake -c clean at the end because the recipe has
been moved, but the bbappend is still present in the workspace layer at
that point and so if we do it will fail due to the dangling bbappend.
It's difficult to do the clean at the point we'd want to because tinfoil
is holding bitbake.lock for most of the time, but in any case cleaning
the recipe is less important than it used to be since we started
managing the sysroot contents more strictly, so just disable cleaning
under these circumstances to avoid the problem.
Fixes [YOCTO #10484].
(From OE-Core rev: c6980307d43632f4172e79d9607004203af4e9c8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When running devtool add, instead of hiding the recipetool create
output, change it so that it's appropriate to show in the devtool
context and show it in real-time. This means that you get status output
such as when a URL is being fetched (though currently no progress
information.) recipetool create now has a hidden --devtool option to
enable this display mode.
(From OE-Core rev: 219aec8803de4ef04c514c87ecfb15359c9424a6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replaced running of truncate utility with the standard library
call os.ftruncate
(From OE-Core rev: 1ba6101ceaee354816e690d44bc9a5dd8dcf4011)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The new runqemu script assumes that if OECORE_NATIVE_SYSROOT is set then
it shouldn't try to run bitbake to find out the values of various
variables such as DEPLOY_DIR_IMAGE; this assumption is incorrect for the
extensible SDK. To work around this, clear OECORE_NATIVE_SYSROOT in the
environment when running runqemu.
Fixes [YOCTO #10447].
(From OE-Core rev: abff69a48bf3076ce8e21356accdc8d85d2c8dbf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
According to UEFI specification all EFI platforms must support
GUID Partition Table(GPT) disk layout. Here is a list of advantages
of using GPT disk layout over the legacy MBR partitioning:
- Logical Block Addresses (LBAs) are 64 bits (rather than 32 bits).
- Supports many partitions (rather than just four primary partitions).
- Provides both a primary and backup partition table for redundancy.
- Uses version number and size fields for future expansion.
- Uses CRC32 fields for improved data integrity.
- Defines a GUID for uniquely identifying each partition.
- Uses a GUID and attributes to define partition content type.
- Each partition contains a 36 character human readable name.
Used GPT partitioning in all EFI kickstart files.
Tested result images on NUC, MinnowBoard MAX and MinnowBoard Turbot.
(From OE-Core rev: 66d4efeb0face5fc8a1755dcd2ed3a611997a04d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not
needed for any of reference BSPs.
(From OE-Core rev: ee16a283d695112236906338887c6eba109c9fb5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not
needed for any of reference BSPs.
(From OE-Core rev: 7b2443364a42c731bc9eefa6bb460262464e26b6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In modern kernels, ARCH=x86 defaults to 64 bits, so explicitly
unset this word length for qemu i386 architectures.
(From meta-yocto rev: 9750779bc78de3ea33d7f88e4972a5b21c3f811b)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not needed
for any of reference BSPs.
(From OE-Core rev: b46825a6ce5cecd24fed814bae48f9cfd0b97568)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Stopped using GPT partition table in mkefidisk.wks as it's not
supported by all reference hardware.
(From OE-Core rev: 07bb11b097a67ff89ae633fa1992db5494d75c0c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disk identifier created by parted doesn't match the one we generated
and used in bootloader config. We need to rewrite it to make our image
bootable.
Modified involved API and data structures to access previously
generated disk identifiers after MBR is initialized. Written disk
identifiers to MBR.
(From OE-Core rev: 221d3bdd6e0ab8a4d25e2c96bd976cbec4e76681)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added generation of partition UUIDs for MSDOS partitions.
UUID for MSDOS partitions is <disk identifier>-<partition number>,
where disk identifier is a random 4 bytes long number. It's usually
generated when MBR/partition table is initialized.
As UUID is used to point to the root partition in bootloader config
we need to generate it before the MBR is initialized.
After MBR is created we need to rewrite system identifier to match
it with what is used in bootloader config. This will be implemented
in the next commit.
(From OE-Core rev: 6ecc6addf4080eda75a15af077816c81c6bf70a5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
sgdisk fails to set PARTUUID for msdos partitions as it's only
supported for GPT partitions.
Checked partition table format to run sgdisk --partition-guid
only for GPT partitions.
(From OE-Core rev: 0c1804821917d6d3a062ca19b63667d030138f21)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With recent changes to recipeutils, the list of local files returned
by get_recipe_local_files could possibly include source files. This
only happens when the recipe contains a SRC_URI using subdir= to put
files in the source tree. These files should be ignored when
populating the list of local files for oe-local-files directory.
[YOCTO #10326]
introduced in
OE-Core revision 9069fef5dad5a873c8a8f720f7bcbc7625556309
(From OE-Core rev: 31f1bbad248c36a8c86dde4ff57ce42efc664082)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #10301]
(From meta-yocto rev: 088662bd13fa7366cb471be4be746aa195defa3f)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #10301]
(From meta-yocto rev: f9d795172ae18489eaf40af7d32f8402299b805c)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #10301]
(From meta-yocto rev: b0e3518ffae3e72d7aad20860b3da79b70d74383)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #10301]
(From meta-yocto rev: 0b58b90844c2898c604e7310c3fa5577044c0f08)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #10301]
(From meta-yocto rev: 586ff58a6a803539fd1cf6709dbcedf3ec88924e)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All kernel choices today (linux-yocto_4.* and custom) have the same xserver options,
so remove the duplicate lines.
(From meta-yocto rev: c456b5cf172e5ee1fca078383cad189325ea05f5)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #10301]
(From meta-yocto rev: 01e16ff4d1df17daed184279868e151cbf35a1a8)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #10301]
(From meta-yocto rev: ad6e937db32721cfec8d4d85818d028878c5bc23)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Relying on that awk is installed on the target just to extract the
fourth column (i.e., the free volume size) from `df -P` is an
unnecessary dependency for devtool deploy-target. As it is already
using sed to mangle the output from `df -P`, this can easily be
modified to only extract the free volume size.
(From OE-Core rev: 7bab454b0bf0075fbb2a5de06286a9da1df2adc6)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the user runs devtool add on an npm:// URL (or source tree that uses
node.js), and npm is not available, just build nodejs-native instead of
telling the user they need to do it; if that fails because there isn't
any such recipe (which would be the default, since it's not in OE-Core)
then produce a slightly more readable error message hinting at what the
user needs to do.
Note that this forces the use of nodejs-native rather than npm on the
host - this makes sense for two reasons: (1) we need it to be compatible
with nodejs for the target, and (2) we have to have a recipe for that
anyway, so allowing you to avoid having a recipe for the native version
isn't really beneficial.
There's a bit of a hack in here in order to allow this - for node.js
sources that aren't fetched via npm we don't know that they are that
until we've fetched and unpacked them, by which time we're inside
recipetool and have an active tinfoil instance that will prevent bitbake
being run. To avoid this being an issue, we allow recipetool to get to
the point where we know we need npm and then exit with a specific exit
code, at which point devtool can try to build it and then if that
succeeds, it will re-execute recipetool. This is definitely not ideal,
but it can't really be refactored and done properly until we do the
tinfoil2 refactoring; in the mean time though we still want to be
helpful to the user.
Fixes [YOCTO #10337].
(From OE-Core rev: f40662bde5aab158c4e4c3c3ff5e68665a4194a5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We want to remove the -f/--fetch option at some point (as you can now
specify a URL as a positional argument instead) so display a warning
that it's deprecated if it is used.
(From OE-Core rev: 43476d77a91d50454ca26e016a3413b24e9f3aec)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We were supposed to be printing out the specified recipe name here but I
forgot to specify a parameter for the string.
(From OE-Core rev: 87f844e533adfc229a5d26857a82cc6b125216c8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a preparation to use mkefidisk as a default wks for
genericx86* BSPs. This change enables usage of partition UUID
instead of device name to specify root partition in kernel
command line. It should make images to boot on devices with
boot device names that differ from what's mentioned in wks file.
(From OE-Core rev: 23cca700870230b46d251086441136e99659ef12)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rename wks for systemd-boot per the suggestion from community.
Also amend description to distinguish it from others when
running "wic list images".
(From OE-Core rev: 6303dbbaa08214a37caf38e3b6b5a30a108bd3b7)
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This function was broken by the multi-config changes, and isn't needed anymore
now that recipeutils.pn_to_recipe can handle provides. Without this, the
newappend sub-command fails.
(From OE-Core rev: 4a5028dc3d1ab2f97465e63db5b05de73daebdfa)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Preserving images for every partition doubles disk space
consumed by an image build. As those images are not used,
so it's better to remove them after assembling final image.
(From OE-Core rev: 51171b4aa10f2218c5e27d785ca7bf4f3949a4b4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added serial console to kernel command line to to make it
easier to boot wic images on devices without display.
Tested on MinnowBoard MAX.
(From OE-Core rev: 9a774e3bcd5dc4c85d642acc7bf26095b8c620e4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that recipeutils.validate_pn() properly validates characters used in
the name, we can drop this bit checking for '/' since that's not
permitted by validate_pn(). (The FIXME comment here - that I myself
apparently wrote - is questionable since that function was clearly never
intended to allow '/', perhaps I was misled because it was broken and
did so).
(From OE-Core rev: e010d9be3709cf3c607ffc03c3188abe4e1e9eb4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In keeping with making recipetool create / devtool add as easy to use as
possible, users shouldn't have to know how to reformat git short form ssh
URLs for consumption by BitBake's fetcher (for example
user@git.example.com:repo.git should be expressed as
git://user@git.example.com/repo.git;protocol=ssh ) - instead we should
just take care of that automatically. Add some logic in the appropriate
places to do that.
(From OE-Core rev: 78c672a72f49c4b6cfd8c247efcc676b0ba1681a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Filter out a plain "Licensed under the XXXX license" statement, as seen
in the capnproto project (and no doubt others).
(From OE-Core rev: ba4aa319fd49ee02ce2e30c2db0f3988c0e8833c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
AX_PKG_SWIG is not the only commonly-used macro for detecting swig -
there's also AC_PROG_SWIG. As per AX_PKG_SWIG, add swig-native to
DEPENDS if AC_PROG_SWIG is found in configure.ac.
(From OE-Core rev: 847a1aa7153fc8a7b820353283a6f1e51d64f8de)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Jiajie Hu
Paul Eggleton
Stephano Cetola
Jussi Kukkonen
Maciej Borzecki
Ed Bartosh
Leonardo Sandoval
Peter Kjellerstedt
Jianxun Zhang
Christopher Larson