| Age | Commit message (Collapse) | Author |
|---|
|
The sync command is similar to the extract command, except it
fetches the sync'ed and patched branch to an existing git repository.
This enables users to keep track the upstream development while
maintaining their own local git repository at the same time.
Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Apparently bb.fetch.URI can't handle this at the moment.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Previously exec_native_cmd() would remove all items from PATH except for
the native sysroot. This can cause issues for the tools that are created
using create_wrapper().
Now instead of wiping out the PATH, run a sanity check to check if the
command is in the native sysroot.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For modify / extract / upgrade, if the specified "recipe" is not
actually a recipe but a virtual target such as virtual/kernel, map it
correctly to the actual recipe and make sure we use that name within the
workspace. Thanks to Chris Larson for reminding me this was still broken
and for a hint on how to fix it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If recipe parsing fails we need to exit out instead of attempting to use
the data object that's set to None, which resulted in a traceback.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the directory specified by --extract-to exists, because we were using
shutil.move() to move the temporary extracted directory to the specified
path, a subdirectory was being created under that directory instead of
moving the contents, which was a different result than if the directory
didn't previously exist. We could try to always move the contents but
that's complicated when any symlinks are involved; the simplest thing is
just to remove the directory (which should be empty anyway) before
moving the temporary directory across in its place.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use "git cherry" against the original tag that we made when we extracted
the source in order to find the revisions that are definitely new. This
allows you to modify a commit in the middle of the series and then run
devtool update-recipe and not have the subsequent patches unnecessarily
modified.
Fixes [YOCTO #8388].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The name of the directory for local source files under srctree is
'oe-local-files', not 'local-files'. Fixes a bug that slipped through
in b7ab82485e4514e07ab8a76e554da27ddc92e6c0.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable variable history tracking so that the variables are updated in
the correct file - i.e. in the file they are already defined.
[YOCTO #7715]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change makes it possible to have local files (non-remote SRC_URI
files, i.e. files that are located in the "recipe space") under the
srctree even if S!=WORKDIR. The files must be placed under the
'local-files' subdirectory.
Complements the previous patch that imports local files into srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
* extract: Copy all local source files (i.e. non-compressed/non-arcived
SRC_URI files that have file:// URI prefix) - excluding patches - to
the srctree repository. The files will be placed in a subdirectory
called 'oe-local-files'. The oe-local-files directory is not committed
to the Git repository, but, marked to be ignored by a .gitignore file.
The developer can manually add and commit the files to Git if the
changes to them need to be tracked.
Before this patch, local source files (were copied (and committed) to
the srctree repository only in some special cases (basically when
S=WORKDIR) when doing devtool-extract. For most of the packages local
files were not copied at all.
* update-recipe: This patch causes the local files to be 'synced' from
the srctree (i.e. from the 'oe-local-files' subdirectory) to the
layer. Being 'synced' means that in addition to copying modified
files over the original sources, devtool will also handle removing and
adding local source files and updating the recipe accordingly. We
don't want to create patches against the local source files but rather
update them directly. Thus, 'oe-local-file' directory is ignored in
patch generation when doing update-recipe, even if committed to Git.
This functionality is only enabled if the 'oe-local-files' directory
is present in srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Helper function for replacing a pattern like:
target_dir = os.path.dirname(target)
bb.utils.mkdirhier(target_dir)
shutil.move(source, target)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Implement new function that handles patch file generation. The new
function also does the discovery of new, updated and deleted patches.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
When adding multiple new patches append them to SRC_URI in correct order
so that they apply correctly.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Rename fails over filesystem boundaries.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We only need the base configuration to get the variable values we want
to get here, there's no need to parse recipes / load the cache.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Do not change change current working directory permanently, but, only
for the duration of tinfoil initialization instead. The previous fix
caused very unintuitive behavior where using relative paths were solved
with respect to the builddir instead of the current working directory.
E.g. calling "devtool extract zlib ./zlib" would always create create
srctree in ${TOPDIR}/zlib, independent of the users cwd.
(From OE-Core rev: 4c7f159b0e17a0475a4a4e9dc4dd012e3d2e6a1f)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds a subcommand to search to find the target recipe name providing
some file or capability. This is implemented by searching on recipe
name, package name, description, package contents (file names), and
runtime file provides. For example:
$ devtool search libGL
mesa
$ devtool search X11
xextproto
libxxf86vm
xf86driproto
xf86vidmodeproto
libxfixes
xproto
libx11
...
$ devtool search /bin/sed
busybox
sed
This is particularly useful within the extensible SDK but is also made
available in devtool alongside the build system.
Note of course that because this searches pkgdata, useful results depend
upon do_packagedata(_setscene) having executed for the recipe being
searched for.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We ship the runqemu script and if we build QEMU itself within the
extensible SDK, then it would be nice to be able to run it. This is a
very thin wrapper around runqemu, supplying the machine and image name
so the user doesn't need to. (This subcommand is only available within
the extensible SDK since it only really makes sense there where it is
otherwise hard to run runqemu directly.)
Implements [YOCTO #6657].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a means of creating recipes for package files or archives that
contain a directory structure to be installed verbatim, for example an
rpm file. (We mostly just re-use bin_package here and skip some of the
normal build system checks.) This support is available in "recipetool
create" and "devtool add" which wraps the former.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upon further reflection, it seems to me that this bbappend ought to just
be deleted at the end of the build. This keeps things simple; you never
have to remember to delete any files to get back to where you were
before with the image. This means we can also drop the slightly awkward
message reminding the user how to do that. I've also updated the test to
look at the image manifest to determine if the command has worked
instead of looking for the (now deleted) bbappend.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Make image optional for the extensible SDK (auto-determine it based on
the targets the SDK was built for)
* Check that specified recipe is in fact an image
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the user is running "devtool build-image" within the extensible SDK
then they probably won't know where to find the resulting output files,
so we should tell them explicitly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We build recipes and include packages into the image, adjust the
terminology used in code and messages accordingly. Also fix a few typos.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we end up printing a message about the build directory being the same
as the source, we should print that first and then print the message
about the recipe file possibly needing to be edited to the end so that
it has slightly more impact.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the fetched source isn't already a git repository, initialise it as
one and then branch and tag, just as we do with "devtool modify". This
makes it easier to make changes, commit them and then use the
"devtool update-recipe" command to turn those commits into patches
on the recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some recipes don't extract any source (for example, opkg-keyrings). We
were producing a traceback in this case because we weren't checking if
the directory existed.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recipes that use work-shared (such as libgcc) are capable of unpacking
the source, but it doesn't necessarily unpack to ${WORKDIR}/${BP}. Use
the last part of the actual S value instead which is more likely to
work.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
unpack task
If you try to use "devtool modify -x" or "devtool extract" on a recipe
where do_unpack has been set as noexec (e.g. glibc-locale), then we get
an error because the expected source wasn't ever unpacked. Do a check up
front for noexec being set on do_unpack and error out with a reasonable
message if that's the case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The # character in a URI denotes a fragment; we don't care about this
since it is never supposed to be sent to the server, so remove it from
the URI before actually trying to fetch it or use it in SRC_URI within
the recipe.
(This has come up because download links on pypi.python.org seem to have
a fragment containing the md5sum of the download; without stripping this
off the fetcher will choke on it.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The shell considers empty functions to be a syntax error, so for
template shell functions that contain only comments (or no lines at all)
then add a : to act as a no-op which avoids the syntax error.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we were adding a recipe for software that would typically be built
in the same directory as the source, we were always using a separate
build directory unless the user explicitly specified not to, leading to
errors for software that doesn't expect to be built that way (such as
Python modules using distutils). Split out the code that makes this
determination automatically from the "devtool modify" and "devtool
upgrade" code and re-use that here so the behaviour is consistent.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These functions ostensibly allowed parsing a recipe without bbappends
but this clearly hadn't been tested because a variable was unassigned in
both of them in that case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes, particularly if you extracted the source to /tmp which is on
tmpfs, the external source tree that is being pointed to may no longer
exist when you come to run "devtool build" or "devtool update-recipe"
etc. Make all of the commands that need to check for a recipe being in
the workspace call a single function and have that function additionally
check the source tree still exists where appropriate.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is not actually used for anything - I thought that we would need to
use it within devtool to set global configuration, but we're able to do
everything we need within the bbappends it creates, which also saves on
parse time. If we're not going to use work-config.inc let's just drop it
completely.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It was wrongly assumed that part.size is meagured in Mb. In fact it's
in Kb, so there is no need to convert bitbake variable ROOTFS_SIZE as
it's also in Kb.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
This sub-command creates a bbappend for the specified target and prints the
path to the bbappend. The -w argument, as with some of the other recipetool
commands, will make a version-independent bbappend.
Example usage: recipetool newappend meta-mylayer virtual/kernel
[YOCTO #7964]
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use already existing bb.fetch.decodeurl() for getting the parameters for
a URI. This is more fault tolerant and maintainable.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
So far all devtool and recipetool plugins were expected
to have plugin_init function. This function is empty in
most of plugins as they don't require initialisation.
Making plugin_init optional would allow not having empty
plugin_init in every plugin.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Enables creating packages using devtool within the extensible SDK. (This
is only enabled within the extensible SDK because it provides no
advantage over just running bitbake directly there).
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a recipe has been added to the workspace via "devtool add"
or "devtool upgrade" then the recipe file itself will be in the
workspace layer; if you run "devtool update-recipe" particularly in the
upgrade case you might think it would apply the upgrade to the original
recipe, but it will not - in order to remain consistent it has to update
the recipe that's in use which is the one in the workspace. Warn the
user in this situation so that they know what they need to do when they
are finished.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enhance the logic behind the 'auto' mode a bit by only updating the
SRCREV if the changes are already found upstream. The logic is simple:
update SRCREV only if the current local HEAD commit is found in the
remote branch (i.e. 'origin/<branch_name>'). Otherwise resort to
patching.
This affects a couple of the oe-selftest tests so update those as well.
[YOCTO #7907]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Through -s/--disable-parallel-make, the user can turn off parallelism
on the make tool. This can be useful when debuging race condition issues.
In order to set PARALLEL_MAKE = "" a post-config file created and then
passed into the build.
[YOCTO #7589]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The intention is to have a single file for each devtool feature
so devtool can grow in a modular way. In this direction, this patch creates
build.py, moving all related build features from standard.py to build.py.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrades a recipe to a particular version and downloads the source code
into a folder. User can avoid patching the source code.
These are the general steps of the upgrade function:
- Extract current recipe source code into srctree and create a branch
- Extract upgrade recipe source code into srctree and rebase with
previous branch. In case the rebase is not correctly applied, source
code will not be deleted, so user correct the patches
- Creates the new recipe under the workspace
[YOCTO #7642]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the _add_md5() function to be called with a directory in order to
recursively add the files under it. Additionally, we need to skip
preserving empty directories (since directories aren't listed in the md5
file).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This will now also be used by "devtool upgrade".
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Do not put 'do_shared_workdir' into SRCTREECOVEREDTASKS when creating
bbappend for kernel packages. This will allow building packages that
depend on the shared build artifacts of kernel.
[YOCTO #6658]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Wic uses bitbake variable ROOTFS_SIZE to set correspondent
partition size. This variable is a literal representing
float value. Wic crashes trying to convert it to int with
the error: invalid literal for int() with base 10: '10166.0'
Fixed this by converting variable to float and rounding result.
This should work for int and float literals.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Tzu-Jung Lee
Christopher Larson
Randy Witt
Paul Eggleton
Markus Lehtonen
Ed Bartosh
Christopher Larson
Brendan Le Foll
Leonardo Sandoval