| Age | Commit message (Collapse) | Author |
|---|
|
AX_PKG_SWIG is not the only commonly-used macro for detecting swig -
there's also AC_PROG_SWIG. As per AX_PKG_SWIG, add swig-native to
DEPENDS if AC_PROG_SWIG is found in configure.ac.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If python is required then we need to inherit pythonnative (or
python3native) otherwise do_configure will probably fail since it won't
be able to find python.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When creating a recipe for an existing local git clone, we attempt to
use the fetcher to determine if it supports the SRCREV variable.
Unfortunately running this code does a network check to get the latest
revision as a direct result of us using '${AUTOREV}' as a default value.
If you don't have a network connection this will of course fail. Rather
than have this block creating the recipe, catch the exception and just
guess from the URL.
Ultimately this should probably be fixed in the fetcher but for now this
will at least resolve the issue on this end.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I ran into an example where recipetool was getting the name/version
completely wrong:
https://bitbucket.org/sortsmill/libunicodenames/downloads/libunicodenames-1.1.0_beta1.tar.xz
>From this it would create a libunicodenames-1.1.0-beta1_1.1.0-beta1.bb
file (likely because it couldn't split the file name and therefore took
all of it, then got the version from one of the files inside the
tarball). When this happens it's just irritating because you then have
to delete the recipe / run devtool reset and then run recipetool create
/ devtool add again and specify the version manually.
This patch is the result of systematically running the
determine_from_filename() function over the files on the Yocto Project
source mirror and my local downloads directory and fixing as many of the
generic issues as reasonably practical - it now gets the name and
version correct much more often. There are still cases where it won't,
but they are now in the minority.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Try to ensure that for Apache, GPL and LGPL where the values extracted
from the "Classifiers" field may not be version-specific, if there is a
versioned license in the free-form license field then use that instead.
Also insert the free-form license field as a comment in the recipe for
the user's reference.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make use of the extravalues dict to send back other variable values from
the python handling plugin, and enable passing back PV and PN. This not
only places variable values in the final recipe a bit more consistently
with other types of source, it also allows the name and version to be
picked up fron a local source tree and not just when the recipe is
fetched from a remote URL that happens to have those in it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we output extra blank lines (because of some automated editing) then
it makes the output recipe look a bit untidy. You could argue that we
should simply have the editing code not do that, but sometimes we don't
have enough context there for that to be practical. It's simple enough
to just filter out the extra blank lines when writing the file, so just
do it that way.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If you have your own node.js application you may not publish it (or at
least not immediately) in an npm registry - it might just be in a
repository on github or on your local machine. Add support to recipetool
create for creating recipes to build such applications - extract their
dependencies, fetch them, and add corresponding npm:// URLs to SRC_URI,
and ensure that LICENSE / LIC_FILES_CHKSUM are updated to match. For
example, you can now run:
recipetool create https://github.com/diversario/node-ssdp
(I had to borrow some code from bitbake/lib/bb/fetch2/npm.py to
implement this functionality; this should be refactored out but now
isn't the time to do that refactoring.)
Part of the fix for [YOCTO #9537].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If you make adjustments to the source tree (as create_npm.py will be)
then you will need to re-run the license variable handling code at the
end so that we get all of the files that should go into
LIC_FILES_CHKSUM if nothing else. Split out the license variable
handling to a separate function in order to allow this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
For debugging it's useful to be able to tell recipetool to keep the
temporary directory.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Ensure we fetch submodules and set SRC_URI correctly when pointing to a
git repository that contains submodules.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
When trying to map python module dependencies to the packages that
provide them, if we're looking for .so files that satisfy
dependencies then we need to exclude files found under the .debug
directory, otherwise the dependency will get mapped to the python-dbg
package which isn't correct.
For example, this fixes creating a recipe for pyserial and not getting
python-fcntl in RDEPENDS_${PN}, leading to errors when trying to use the
serial module on the target.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If AX_PKG_SWIG is found in configure.ac, then what's being looked for is
the swig binary, not swig for the target - so fix the dependency
accordingly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
multi-configuration builds
Unfortunately to implenent multiconfig support in bitbake some APIs
had to change. This updates code in OE to match the changes in bitbake.
Its mostly periperhal changes around devtool/recipetool
[Will need a bitbake version requirement bump which I'll make when merging]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The regex here needs to be anchored to the end or it'll match longer
URLs, which was exactly what I was trying to avoid. This regression was
introduced in OE-Core revision 7998dc3597657229507e5c140fceef1e485ac402.
Fixes [YOCTO #10023].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a comment to the recipe listing license files that were found but
not able to be identified, so that the user can find and examine them
by hand fairly easily.
Fixes [YOCTO #9882].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is currently possible to specify a file (e.g. a tarball) on the local
disk as the source, but you have to know to put file:// in front of it.
There's really no need to force users to jump through that hoop if they
really want to do this so check if the specified source is a file and
prefix it with file:// if that's the case.
Also ensure the same works for "devtool add" at the same time.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For a while now, Github hasn't been advertising a specific repository
URL since cloning the web URL with git works. Armed with this knowledge
and fully expecting people to just paste the github URL, we need to
handle this situation specially. If it looks like a github URL to the
root of a repository then treat it as a git repository instead of a
normal https URL to be fetched by the wget fetcher.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Code cleanup, no functional changes - this code was never used.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We're opening source files with the default encoding (utf-8) but we
can't necessarily be sure that they are UTF-8 clean - for example,
recipetool create ftp://mama.indstate.edu/linux/tree/tree-1.7.0.tgz
prior to this patch resulted in a UnicodeDecodeError. Use the
"surrogateescape" mode to avoid this.
Fixes [YOCTO #9822].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
GNU make looks for "makefile" and "GNUmakefile" in addition to
"Makefile", so add these other names to the heuristic for detecting a
make-based project.
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Converted return value of items() keys() and values() to
lists when dictionary is modified in the loop and when
the result is added to the list.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used urllib.parse instead of urlparse to make code
working in python 3.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Moved call of decode('utf-8') as close as possible to
call of subprocess API to avoid calling it in a lot of
other places.
Decoded binary data to utf-8 where appropriate to fix devtool
and recipetool tests in python 3 environment.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Python 3 doesn't have basestring type as all string
are unicode strings.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Replaced iteritems -> items, itervalues -> values,
iterkeys -> keys or 'in'
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
python3 standardises its use of iteration operations. Update
the code to match the for python3 requires.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If fetching source from a git repository, typically within OpenEmbedded
we encourage setting SRCREV to a fixed revision, so change to do that by
default and add a -a/--autorev option to use "${AUTOREV}" instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we use ${BP} for the subdirectory, the default value of S will work
rather than having to have an ugly value derived from the package
file name in both places. This does mean that we have to assume the
default though (we can't just let the normal logic work because the
value of BP is the default until later on, so the replacement doesn't
work).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Extract the metadata from package files and use it to set variable
values in the recipe (including recipe name and version, LICENSE,
SUMMARY, DESCRIPTION, SECTION and HOMEPAGE). For LICENSE we take care
not to step on any value determined by our license file scan; if there
is one we simply add a comment above the LICENSE setting so the user can
resolve it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow plugins to set any variable value through the extravalues dict,
and use this to support extracting SUMMARY and HOMEPAGE values from spec
files included with the source; additionally translate "License:" to a
comment next to the LICENSE field (we have our own logic for setting
LICENSE, but it will often be useful to see what the spec file says if
one is present).
Also use the same mechanism for setting the same variables for node.js
modules; this was already supported but wasn't inserting the settings in
the appropriate place in the file which this will now do.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix two problems falling back to the "license" field from package.json
when no license file is present:
1) The function that was supposed to return the license field value was
always explicitly returning None, and this was never noticed (because
the test cases never exercised the fallback as they provided license
files for each module).
2) Fix the main package not falling back because it had a default of an
empty list, which evaluates to '' instead of 'Unknown'.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The extra directory next to the recipe should only be created if there
are files to put into it; currently only the npm plugin does this. I
didn't notice the issue earlier because the test was actually able to
succeed under these circumstances if the recipe file came first in the
directory listing, which was a fault in my original oe-selftest test;
apparently on some YP autobuilder machines the order came out reversed.
With this change we can put the oe-selftest test that highlighted the
issue back to the way it was, with an extra check to reinforce that only
a single file should be created.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
"npm shrinkwrap" creates a file that ensures that the exact same
versions get fetched the next time the recipe is built. lockdown is
similar but also includes sha1sums of the modules thus validating they
haven't changed between builds. These ensure that the build is
reproducible.
Fixes [YOCTO #9225].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow plugins to create additional files to go alongside the recipe. The
plugins don't know what the output filename is going to be, so they need
to put the files in a temporary location and add them to an "extrafiles"
dict within extravalues where the destination filename is the key and
the temporary path is the value.
devtool add was also extended to ensure these files get moved in and
preserved upon reset if they've been edited by the user.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the user specifies an npm:// URL then the fetcher needs npm to be
available to run, so check if it's available early rather than failing
later.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than rolling all of an npm module's dependencies into the same
package, split them into one module per package, setting the SUMMARY and
PKGV values from the package.json file for each package. Additionally,
mark each package with the appropriate license using the license
scanning we already do, falling back to the license stated in the
package.json file for the module if unknown. All of this is mostly in
aid of ensuring all modules and their licenses now show up in the
manifests for the image.
Additionally we set the main LICENSE value more concretely once we've
calculated the per-package licenses, since we have more information at
that point.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Matching license texts directly to md5sums only goes so far. Some
licenses make the copyright statement an intrinsic part of the license
statement (e.g. MIT) which of course varies between projects. Also,
people often seem to take standard license texts such as GPLv2 and
reformat them cosmetically - re-wrapping lines at a different width or
changing quoting styles are seemingly popular examples. In order to
match license files to their actual licenses more effectively, "crunch"
out these elements before comparing to an md5sum. (The existing plain
md5sum matching has been left in since it's a shortcut, and our list of
crunched md5sums isn't a complete replacement for it.)
As always, this code isn't providing any guarantees (legal or otherwise)
that it will always get the license correct - as indicated by the
accompanying comments the LICENSE values it writes out to the recipe are
indicative and you should verify them yourself by looking at the
documentation supplied from upstream for the software being built if you
have any concerns.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For example, this picks up a file named MIT-LICENSE.txt.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make the following improvements to mapping items specified in
AC_CHECK_PROG, AC_PATH_PROG and AX_WITH_PROG to recipes/classes:
* Produce a map of native recipe -> binary for all binaries currently in
STAGING_BINDIR_NATIVE and use this when mapping items
* Add some more entries to the class map
* Ignore autotools binaries since they are covered by the inherit of
autotools
* Ignore coreutils-native since that would almost always be a bogus
dependency
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow for whitespace in appropriate places, and ensure we match all
whitespace chars not just the space character.
(This fixes extracting dependencies from tmux's configure.ac, for
example.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Clearly I didn't test this part of the code - lists don't have an "add"
method. Needless to say I have tested it now.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add detection for npm modules and support for extracting the name and
version from package.json as is usually part of an npm module contents.
Note: this will likely only produce a buildable recipe if you use an
npm:// URL; simply pointing to a node.js source repository isn't going
to fetch the module's dependencies. It also doesn't set up the
shrinkwrap/lockdown automatically, so there is some room for improvement
later.
Implements [YOCTO #8690].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add support for detecting a Linux kernel source tree and generating a
basic kernel recipe using meta-skeleton's linux-yocto-custom recipe as a
base.
Implements [YOCTO #8981].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Detect kernel modules by looking for #include <linux/module.h>, and
handle the various styles of Makefile that appear to be used. I was able
to use this code to successfully build a number of external kernel
modules I found.
Implements [YOCTO #8982].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Package names are actually case sensitive near as I can tell, so we
shouldn't be lowercasing them everywhere.
* Look for CMake packages in pkgdata and map those back to recipes,
so we aren't dependent on the hardcoded mappings (though those are
still preserved).
* Avoid duplicates in the unmapped package list
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a means of extending the dependency extraction for autotools and
cmake.
Note: in order to have this work, you need to have an __init__.py in the
lib/recipetool directory within your layer along with the module
implementing the handlers, and the __init__.py needs to contain:
# Enable other layers to have modules in the same named directory
from pkgutil import extend_path
__path__ = extend_path(__path__, __name__)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Looking at Chris Larson's code for starting the user's editor for
"recipetool newappend" it was slightly better than what I wrote for
"devtool edit-recipe" in that it checks VISUAL as well as EDITOR and
defaults to vi if neither are set, so break this out to its own function
and call it from both places. The broken out version passes shell=True
however in case it's a more complicated command rather than just a name
of an executable.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you specify a local directory which happens to be a git repository
with an origin remote (and it is in fact remote), we can use that for
SRC_URI as implemented by OE-Core revision
b143d414846854dc8b3e0a47358daf5646eded38, however we also need to set S
if the recipe is going to be of any use fetching from that SRC_URI
later.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Paul Eggleton
Richard Purdie
Nathan Lynch
Ed Bartosh
Christopher Larson