| Age | Commit message (Collapse) | Author |
|---|
|
workarounds
Rather than horrible workarounds, use the new --setscene-only option
of bitbake to pre-populate the SDK structures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's logical that you would want to build BBCLASSEXTENDed items
separately through devtool build, so simply allow that - we're just
passing the name verbatim to bitbake, so all it means is adjusting the
validation.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the recipe file itself was created in the workspace, and it uses
BBCLASSEXTEND (e.g. through devtool add --also-native), then we need to
clean the other variants as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're doing this in a couple of places, let's just find the recipe file
if it exists within the workspace (which it will if it's been added
through "devtool add") when we read in the workspace.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes you need to build a variant of a recipe for the build
host as well as for the target (i.e. BBCLASSEXTEND = "native"); add a
--also-native command line option to "recipetool create" that enables
this and plumb it through from an identical option for "devtool add".
(We could conceivably do the same for nativesdk, but I felt it might be
confusing within the context of the extensible SDK, where nativesdk
isn't really relevant to the user.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to run the clean for all recipes that are being reset before we
start deleting things from the workspace; if we don't, recipes providing
dependencies may be missing when we come to clean a recipe later (since
we don't and couldn't practically reset them in dependency order). This
also improves performance since we have the startup startup time for the
clean just once rather than for every recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For debugging purposes it's useful to be able to skip the preparation
step so you can inspect what the state of the build system is first.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Running "raise" with no arguments here is invalid, we're not in
exception handling context. Rather than also adding code to catch the
exception I just moved the check out to the parent function from which
we can just exit.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Clone the correct path - we need .git on the end
* Pull from the specified path instead of expecting a remote to be set
* up in the repo already (it isn't by default)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We read the updateserver setting from the config file but we never
actually used that value - the code then went on to use only the value
supplied on the command line.
Fix courtesy of Dmitry Rozhkov <dmitry.rozhkov@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Copied layers with 'cp -a' instead of calling shutil.copytree as
copytree fails to copy broken symlinks.
More pythonic fix would be to use copytree with 'ignore' parameter,
but this could slow down copying complex directory structures.
[YOCTO #8825]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Much of this was copy/pasted from the extract subcommand code; make it
specific to sync.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We deliberately leave the source tree alone when resetting in case it
contains any work in progress belonging to the user; tell them that
we're doing this so they aren't surprised about it still existing later
on.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a recipe in the workspace actually exists as a file within the
workspace (e.g. after doing "devtool add" or "devtool upgrade") then
show the path to the recipe file on the status line for the recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As per the changes to "devtool add", make the source tree path optional
and use the default path if none is specified.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Having to specify -f is a little bit ugly when a URI is distinctive
enough to recognise amongst the other positional parameters, so take it
as an optional positional parameter. -f/--fetch is still supported, but
deprecated.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
recipetool create now has all the logic in it for auto-detecting the
name and version, and using those in the file name - so we can make the
name an optional parameter for devtool add and we pick up the file name
that recipetool has used after the fact.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Assuming we're fetching source remotely (from a URI) we can default the
source tree that will be extracted from it to a "sources" directory
under the workspace in order to save the user specifying it if they
don't have a preferred location.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bbappend already exists at this point, so we know what its path is -
there's no need to figure it out from scratch here.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're repeating this in a couple of places, so we might as well have a
function to do it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a few clarifying words.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add an "edit-recipe" subcommand that runs your default editor (as
specified by the EDITOR environment variable) on the specified recipe in
the workspace. Note that by default the recipe file itself must be in
the workspace - i.e. as a result of "devtool add" or "devtool upgrade";
however there is a -a/--any-recipe option to override this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the SDK update server hasn't been set in the config (when building
the extensible SDK this would be set via SDK_UPDATE_URL) and it wasn't
specified on the command line then we were failing with a traceback
because we didn't pass the default value properly - None is interpreted
as no default, meaning raise an exception if no such option exists.
Additionally we don't need the try...except anymore either because with
a proper default value, NoSectionError is caught as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add 'do_kernel_configme' and 'do_kernel_configcheck' to
SRCTREECOVEREDTASKS of kernel packages. These tasks should not be run
because kernel meta in the srctree is not necessarily up-to-date or
even present which causes build failures and/or invalid kernel config.
Especially so because 'do_patch' which is a dependency of
'do_kernel_configme' is not being run.
We now store .config in the srctree and 'do_configure' task is able to
run successfully.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This makes the correct kernel config to be used when building kernel
from srctree (extrernalsrc). If no kernel config is present in the
builddir 'do_configure' task copies .config from the srctree.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use bb.utils.edit_metadata() to replace some of the logic in this
function; this avoids us effectively having two implementations of the
same thing. In the process fix the following issues:
* Insert values before any leading comments for the next variable
instead of after them
* Insert overridden variables (e.g. RDEPENDS_${PN}) in the correct place
* Properly handle replacing varflag settings (e.g. SRC_URI[md5sum])
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Make some minor clarifications to help text
* Drop ArgumentDefaultsHelpFormatter and just put the defaults in the
text itself where needed (because otherwise you get defaults shown for
store_true options which is somewhat confusing).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Enable access to the configuration object in register_commands() so that
we can read configuration values there; this allows us to show the
task that will be run in the command line help for the build subcommand.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use a bbappend file to set PARALLEL_MAKE instead of a postfile; this
is a bit neater and only affects the specified recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is just belt-and-braces but we ought to use try..finally in this
kind of situation, so just do it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Print the SUMMARY value for each matched item assuming it's not the
default.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This function is no longer required to be defined for a plugin, so drop
it where it's a no-op.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rather than reconstructing the output path for packages, use the proper
variable.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For subcommands that don't actually involve the workspace, don't
auto-create the workspace.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you're upgrading a git recipe to a revision on a release branch
that's different to the branch for the current revision, then you'll
need to update the branch parameter in SRC_URI, so add a --srcbranch/-B
command-line parameter to let you do that easily. It handles both when
the branch is stated verbatim in the recipe, and when a reference to
another variable is used (a common convention is to use a SRCBRANCH
variable for this, though the code doesn't care what variable is used
if any).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If we're upgrading a recipe that fetches from git, and we've simply
fetched a tarball of the repo instead of directly from the upstream repo
(this can happen if you have PREMIRRORS set up as in poky with a core recipe,
e.g. kernelshark) then we won't have any new revisions, and the checkout
will fail with "fatal: reference is not a tree: <hash>". To avoid this,
do a "git fetch" before checking out the new revision.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If we're upgrading a git recipe the recipe file usually won't need
renaming; for some unknown reason we were throwing an error here which
isn't correct.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This code was clearly never tested. Fix the following issues:
* Actually set SRCREV if it's been specified
* Enable history tracking and reparse so that we handle if variables are
set in an inc file next to the recipe
* Use a more accurate check for PV being in the recipe which will work
if it's in an inc file next to the recipe
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you did a "devtool add" followed by "devtool upgrade" and then did
a "devtool reset" on the recipe you upgraded, the first recipe would
also be deleted from the workspace - this was because we were
erroneously adding the entire "recipes" subdirectory and its contents to
be tracked for removal on reset. Remove the unnecessary call to
os.path.dirname() that caused this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The external source of kernel has been patched during the
construction of git repository. Include the do_patch task in the
SRCTREECOVEREDTASKS.
Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The sync command is similar to the extract command, except it
fetches the sync'ed and patched branch to an existing git repository.
This enables users to keep track the upstream development while
maintaining their own local git repository at the same time.
Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For modify / extract / upgrade, if the specified "recipe" is not
actually a recipe but a virtual target such as virtual/kernel, map it
correctly to the actual recipe and make sure we use that name within the
workspace. Thanks to Chris Larson for reminding me this was still broken
and for a hint on how to fix it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If recipe parsing fails we need to exit out instead of attempting to use
the data object that's set to None, which resulted in a traceback.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use "git cherry" against the original tag that we made when we extracted
the source in order to find the revisions that are definitely new. This
allows you to modify a commit in the middle of the series and then run
devtool update-recipe and not have the subsequent patches unnecessarily
modified.
Fixes [YOCTO #8388].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The name of the directory for local source files under srctree is
'oe-local-files', not 'local-files'. Fixes a bug that slipped through
in b7ab82485e4514e07ab8a76e554da27ddc92e6c0.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable variable history tracking so that the variables are updated in
the correct file - i.e. in the file they are already defined.
[YOCTO #7715]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change makes it possible to have local files (non-remote SRC_URI
files, i.e. files that are located in the "recipe space") under the
srctree even if S!=WORKDIR. The files must be placed under the
'local-files' subdirectory.
Complements the previous patch that imports local files into srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
* extract: Copy all local source files (i.e. non-compressed/non-arcived
SRC_URI files that have file:// URI prefix) - excluding patches - to
the srctree repository. The files will be placed in a subdirectory
called 'oe-local-files'. The oe-local-files directory is not committed
to the Git repository, but, marked to be ignored by a .gitignore file.
The developer can manually add and commit the files to Git if the
changes to them need to be tracked.
Before this patch, local source files (were copied (and committed) to
the srctree repository only in some special cases (basically when
S=WORKDIR) when doing devtool-extract. For most of the packages local
files were not copied at all.
* update-recipe: This patch causes the local files to be 'synced' from
the srctree (i.e. from the 'oe-local-files' subdirectory) to the
layer. Being 'synced' means that in addition to copying modified
files over the original sources, devtool will also handle removing and
adding local source files and updating the recipe accordingly. We
don't want to create patches against the local source files but rather
update them directly. Thus, 'oe-local-file' directory is ignored in
patch generation when doing update-recipe, even if committed to Git.
This functionality is only enabled if the 'oe-local-files' directory
is present in srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Helper function for replacing a pattern like:
target_dir = os.path.dirname(target)
bb.utils.mkdirhier(target_dir)
shutil.move(source, target)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Implement new function that handles patch file generation. The new
function also does the discovery of new, updated and deleted patches.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
Richard Purdie
Paul Eggleton
Ed Bartosh
Markus Lehtonen
Tzu-Jung Lee