Age | Commit message (Collapse) | Author |
|
During the test logrotate.LogrotateTest.test_1_logrotate_setup,
there is below logic:
# mkdir $HOME/logrotate_dir
# sed -i "s#wtmp {#wtmp {\n olddir $HOME/logrotate_dir#" /etc/logrotate.d/wtmp
After all logrotate.LogrotateTest finished, only cleanup
$HOME/logrotate_dir as below, but don't restore
the config file /etc/logrotate.d/wtmp.
[snip]
def tearDownClass(cls):
cls.tc.target.run('rm -rf $HOME/logrotate_dir')
[snip]
That's to say, there is one additional line added
to /etc/logrotate.d/wtmp and will make the logrotate
service start failed when run systemd.SystemdBasicTests.test_systemd_failed
Take an example as below when run test as root:
# cat /etc/logrotate.d/wtmp
# no packages own wtmp -- we'll rotate it here
/var/log/wtmp {
olddir /root/logrotate_dir
missingok
monthly
create 0664 root utmp
minsize 1M
rotate 1
}
# ls /root/logrotate_dir
ls: cannot access '/root/logrotate_dir': No such file or directory
# systemctl start logrotate
Job for logrotate.service failed because the control process exited with error code.
See "systemctl status logrotate.service" and "journalctl -xe" for details.
# systemctl status logrotate
logrotate.service - Rotate log files
Loaded: loaded (/lib/systemd/system/logrotate.service; static; vendor preset>
Active: failed (Result: exit-code) since Wed 2019-02-13 03:35:19 UTC; 7s ago
Docs: man:logrotate(8)
man:logrotate.conf(5)
Process: 540 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=1/FAILURE)
Main PID: 540 (code=exited, status=1/FAILURE)
Feb 13 03:35:18 qemumips systemd[1]: Starting Rotate log files...
Feb 13 03:35:19 qemumips logrotate[540]: error: wtmp:9 error verifying olddir path /root/logrotate_dir: No such file or directory
Feb 13 03:35:19 qemumips logrotate[540]: error: found error in file wtmp, skipping
Feb 13 03:35:19 qemumips systemd[1]: logrotate.service: Main process exited, code=exited, status=1/FAILURE
Feb 13 03:35:19 qemumips systemd[1]: logrotate.service: Failed with result 'exit-code'.
Feb 13 03:35:19 qemumips systemd[1]: Failed to start Rotate log files.
Add the logic to restore /etc/logrotate.d/wtmp to
make the cleanup complete to fix the above issue.
(From OE-Core rev: a2db9320d97d12d87524ff16a329f9c38a8da33f)
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Apply patches from systemd_237-3ubuntu10.13 to fix CVE-2019-6454.
CVE-2019-6454 is an issue in which systemd (PID1) can be crashed
with a specially formed D-Bus message.
For information see:
https://usn.ubuntu.com/3891-1/
https://git.launchpad.net/ubuntu/+source/systemd/commit/?h=applied/ubuntu/bionic-updates&id=d7584b894afcaa8a4a1abb69db2a9c81a6276e80
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
Apply patches to fix CVE-2018-6954
NVD description from https://nvd.nist.gov/vuln/detail/CVE-2018-6954
systemd-tmpfiles in systemd through 237 mishandles symlinks present in
non-terminal path components, which allows local users to obtain
ownership of arbitrary files via vectors involving creation of a
directory and a file under that directory, and later replacing that
directory with a symlink. This occurs even if the fs.protected_symlinks
sysctl is turned on.
Patches from systemd_237-3ubuntu10.13.debian.
These patches shouldn't be required on newer OE releases since they use
systemd v239 or higher.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
Affects < v240
Signed-off-by: Marcus Cooper <marcusc@axis.com>
>From v2 patch on openembedded-core@lists.openembedded.org
Incresed file name number from 0026 to 0027.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
Affects < v240
Based on thud commit d5d2b821fc85b8cf39f683061ac2a45bddd2139f
The second patch in the thud commit doesn't apply against 237. Use the
version of the second patch CVE-2018-16865_2.patch from
systemd_237-3ubuntu10.13.debian.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
Affects < v240
Based on thud commit 403e74b07b6f3c4a2444e68c74a8434fb17aee49
The patch in the thud commit doesn't compile against 237. Use the
version of this patch, CVE-2018-16864.patch from
systemd_237-3ubuntu10.13.debian.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
Backport patch to fix the following CVE.
CVE: CVE-2018-15688
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cherry-picked from thud 13591d7224393dc0ae529a03cdf74aceb3540ce9
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
Backport patch to fix the following CVE.
CVE: CVE-2018-15687
Based on thud commit eeb621aa19f690971caf862290a172a115578ba1
The patch in the thud commit doesn't compile against 237. Use the
version of this patch, CVE-2018-15687.patch from
systemd_237-3ubuntu10.13.debian.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
Backport patch to fix the following CVE.
CVE: CVE-2018-15686
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cherry-picked from thud 0ef70603bc983315eb0e8a97958d995a31198c35
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
This regression has been introduced while upgrading to version 237
(commit 906230a73b3ccfa4afd2a19a6b0aa18cd1d5fa08)
and seems to only affect sumo version.
Signed-off-by: Matthieu Rogez <matthieu.rogez@fivesgroup.com>
|
|
The test works by excluding curl-dev which curl-staticdev depends upon.
When static libraries aren't disabled, this leads to an odd looking test
failure.
Simply exclude curl-staticdev as well in case its enabled to make sure
the test always works.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Start opkg/dpkg as soon as the respective package managers status
file is present, no matter whether /etc/$pm-postinsts exists. This
decouples the implicit link between postinsts scripts in /etc and
the package manager: Currently the package manager is only started
if those scripts are present, although the package manager does not
use those scripts at all! Package managers install their own set of
postinst scripts.
The behavior when using rpm packages stays the same.
Note that using the package managers capability to execute postinst
scripts is preferred for good reasons: It makes sure that the
package managers database reflects that the packages have been
completely installed and configured.
This change allows to drop installation of the postinsts scripts
when package management is present. This will be done in a separate
change.
Note: Before commit 5aae19959a44 ("rootfs.py: Change logic to
unistall packages") rootfs.py did not install /etc/$pm-postinsts
when package management is installed! The change caused YOCTO #8235
which lead to the behavior change of run-postinsts in first place.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
| error: create archive failed on file /media/build1/poky/build/tmp/work/all-poky-linux/xcursor-transparent-theme/0.1.1+gitAUTOINC+23c8af5ba4-r0/deploy-sources/allarch-poky-linux/xcursor-transparent-theme-0.1.1+gitAUTOINC+23c8af5ba4-r0/xcursor-transparent-theme-0.1.1+git0+23c8af5ba4-r0.src.rpm: cpio: read failed - No such file or directory
| Building target platforms: noarch-poky-linux
| Building for target noarch-poky-linux
This is caused by:
$ cat log.task_order
do_cleansstate (24289): log.do_cleansstate.24289
do_deploy_archives_setscene (24395): log.do_deploy_archives_setscene.24395
do_fetch (24407): log.do_fetch.24407
[..]
do_package_write_rpm (25448): log.do_package_write_rpm.25448
do_package_qa (25451): log.do_package_qa.25451
So do_deploy_archives can run from sstate, created a .src.rpm in WORKDIR/deploy-sources,
then it was removed when rpm was running. This leads to a broken Source line in the
spec file as the original file was found by the os.listdir().
This fix is just a bandaid over much more fundamental problems sadly.
(From OE-Core rev: a10020ace4c3cd863c782760f7cbecea557ec6e7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The package_rpm code is writing outside the task's sstate directory into
the sstate of do_deploy_archives. This is "out of spec" since if the
task is installed from sstate, the files are not restored. This means
the files may appear/disappear, things are not deterministic and there are
races.
Extend the do_package_write_rpm code to handle writing the src.rpm into
place to avoid these issues. There are other problems but this avoids races
around this file.
(From OE-Core rev: c6e151ba7fe0f14044537cf0ab2cac436f1496e3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
On a system without ccache, f you:
INHERIT += "ccache"
bitbake libtool-cross
<remove INHERIT>
bitbake apmd
then it fails due to being unable to find ccache. The references to ccache are
coded into libtool-cross but the sstate checksum doesn't reflect this due to the
way the class is coded (output should be the same regardless).
The simplest solution is to remove references to ccache from the libtool script.
The output then works regardless of whether ccache is present or not. The
libtool-cross script is only used in a handful of cases (most of the time its
dynamically generated by autoconf) so any performance issue is minor.
(From OE-Core rev: ed550a49d2114c56e5bc033ecd0e83073d2d4067)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
(From OE-Core rev: 28fc470e5e10ee9cce893d037ed5e518bc5612f5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Without this patch /usr/bin/libtoolize is different for each multilib
since their host-triplets are different, despite there being no difference in
the functionality of libtoolize itself.
This change just patches out the problematic line since its just a comment for the user
in help text. Ugly but solves the problem. This fixes issues where libtool and
libXX-libtool couldn't be installed into the same system.
(From OE-Core rev: f70040fd3ca3508d33ed24c749c0b8095b020dab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Whilst the package managers handle multilib ELF binaries well, they don't
handle scripts in the *bindir directories well. This adds support for
marking these up so that they can be handled using update-alternatives.
Its done this way so that non-multilib systems don't see any changes and
there is standardisation amongst the multilibs on how the alternatives are
named and prioritiesd. The priotitisation code needs to be added but this
change means there is somewhere to add it.
Recipe needs to set MULTILIB_SCRIPTS in the form <pkgname>:<scriptname>, e.g.
MULTILIB_SCRIPTS = "${PN}-dev:${bindir}/file1 ${PN}:${base_bindir}/file2"
to indicate which script files to process from which packages.
libtool is used a as a reference to stop the libtool scripts conflicting
in a multilib case and allows the kernel-devsrc change to be merged.
(From OE-Core rev: 18e837433d07cfdce4019c13f682c6676425a2ad)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
As per the previous commit, upstream cpio has a bug which means it crashes on
append. If the image being built has already had testimage ran then cpio-native
will be in the sysroot. It's also possible that some distributions are shipping
this broken CVE patch too.
Now that our cpio-native is fixed, until we can be sure that the host cpio isn't
broken depend on cpio-native if building a cpio image.
[ YOCTO #13042 ]
(From OE-Core rev: c3b9aedcbe538d7fa74bd814644b4899769dec46)
(From OE-Core rev: a75eba71145efa1c3d206c5e5c00608a50f013bc)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The upstream fix for CVE-2016-2037 introduced a read from uninitialized memory
bug when appending to an existing archive, which is an operation we perform when
building an image.
(From OE-Core rev: 046e3e1fca925febf47b3fdd5d4e9ee2e1fad868)
(From OE-Core rev: 2ff6ab2e2944c6a53523b4b1611e1d22f6393500)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
oe-selftest's devtool tests have been broken since commit 2457cd57
(oe-selftest: devtool: avoid parallel races by using temporary copy of
core) if meta is a symbolic link.
(From OE-Core rev: daba6c5a991b370709d17e51305334f55a3858ec)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Some of the devtool tests make changes to files under meta/ -
legitimately since we want these tests to be working with real recipes
and associated files. Unfortunately with the new oe-selftest
parallelisation this can break other tests if files go missing at the
wrong time (among other scenarios). To avoid this issue, simply take a
copy of the core repository and use that for these tests. (We copy the
entire repository since changing the path of meta/ influences COREBASE
and thus we need to have things like scripts/ alongside as well).
(From OE-Core rev: 2457cd57b4195924ef127f497efa2f34f411e660)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The checksum value is only calculated if the uninative class is
inherited, so check for inherit before adding it to local.conf
(From OE-Core rev: 3b5b832589d943700b273e3a4d83561be0c47f36)
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
testimage.bbclass installs a SIGTERM handler which conflicts with the
use of multiprocessing here. This is paritcularly problematic if the http
service is terminated before its started and hence before its had a chance
to reset the default signal handler (as the code was written).
Instead, temporarily remove testimage's handler whilst forking the http process
which means the correct handler is installed and won't deadlock.
Also take the opportunity to add in some log messages about the server start
and shutdown so that future debugging is easier and its clearer what the code
is doing.
(From OE-Core rev: cc0471439aa0085ca87deccf061c5b676ef12388)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
During debugging dnf issue, we found that the test_dnf_install
PASSED the testing even though the environment does not allow
dnf install to run successfully. Further debugging had identified
that current test_dnf_install will execute dnf install even when
the package to be installed already exist, thus dnf install
will just skipped and this test will PASSED even though it was
not.
To solve this, added additional logic to check if the package
to be installed already exist, if yes then remove the package
before actually run dnf install. This will make sure dnf install
was tested as expected.
(From OE-Core rev: 4f662b253f7313c4e02bfafb527cdac076b6309a)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
fixes:
DEBUG: [Running]$ ssh -l root -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.4 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; perl -e '$_="Uryyb, jbeyq"; tr/a-zA-Z/n-za-mN-ZA-M/;print'
| DEBUG: time: 1548816904.4024463, endtime: 1548817204.397057
| DEBUG: Partial data from SSH call: ssh: connect to host 192.168.7.4 port 22: Connection refused
for master/thud/sumo
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
As with the Python test, this can be both better and faster. No need to copy a
file, just run a one-liner.
(From OE-Core rev: c6eef46747fe58bb2310be4f06d2fa9b67901d72)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
We should only be wiping out things on target if the tests have
actually run.
(From OE-Core rev: d38c3eac0a5a1a9b0eb98385832e92f48145655e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
(From OE-Core rev: 564de3681353fe8e203425388e8be9703a89d2da)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Qemu do not use the ip input from external. It will
retrieve ip from QemuRunner instance and assign
ip value.
(From OE-Core rev: 14d99dc6c39c963ba3e0d9a30274846bd5369210)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Mark up these tests as needing a compiler, make and kernel source code
as appropriate, the image feature requirements can then be retired.
(From OE-Core rev: 9f64e6c25abdf494fb511e9cd401f8dcaa08be2a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Add the OEHasPackage decorator to a variety of tests so they determine
automatically if they should run against a given image.
To ensure tests can do this we need to move target operations such
as scp commands into the tests and out of the class startup/teardown.
(From OE-Core rev: 60d6580b85714b8960a964e775d76a7f937f5e5a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Currently this is three test cases:
1) test_python_exists. Fail if python3 isn't in PATH.
2) test_python_stdout. Run a Python script and check the output is as expected
3) test_python_testfile. Check that a file test_python_stdout wrote to exists.
(1) should be a setup and skip the test module if it isn't present.
(2) and (3) should be merged, there's no point copying over a two line Python
file, and the test doesn't verify that the file doesn't exist in the first
place.
Rewrite the test to check that Python is present in a class setup so the entire
test is skipped if it isn't and do some simple rot13 to verify that bytecode is
being executed correctly.
(From OE-Core rev: a35be5f32b4fe70b18ac1e2eccfd94558cecfbba)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
For example, core-image-sato skipped the test alltogether, as it
no longer pulls in Python 2.x at all.
(From OE-Core rev: 5ad0fe9ac6b6362011a17afaa7bee8e788093915)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The test cases assume that rpm-doc is built out, as it says it its
comment. This is not always true. And it sometimes results in
following error.
| cls.tc.target.copyTo(test_file, dst)
| UnboundLocalError: local variable 'test_file' referenced before assignment
Change to use base-passwd-doc, as this package is more likely to be
built out than rpm-doc.
(From OE-Core rev: 2e23543b48921182307065c1fa9e8b9d7fbb3cdc)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
As I will be leaving Intel, this address will no longer be valid,
so swap it for my personal one for now.
(From OE-Core rev: ea58ff101e28dfda3410de66d775df3d8a1e5a96)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
There are failures when multiple users run oe-selftest on the same
host:
PermissionError: [Errno 13] Permission denied: '/tmp/oe-saved-
tests/201812250324_qemu'
This is because /tmp/oe-saved-tests was created by user A, while user B tries
to write data in it, then the error will happen. This patch can fix the
problem.
Move the dumped data to ${LOG_DIR}/runtime-hostdump/ rather than
/tmp/oe-saved-tests/ to fix the problem.
(From OE-Core rev: e219fe5329599cd6c3682f521eaee3852a2c8980)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
When use simpleremote target the flash/boot process is executed
manually, the IMAGE_FSTYPES validation is only needed when execute
testimage against qemu.
The supported_fstypes comes from oeqa.core.target.qemu module.
(From OE-Core rev: e7dc5963adbacc091fe8943119262166977623ad)
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Boot parameter systemd.log_target=console affects command journalctl's
output and causes oe selftest case test_systemd_boot_time fail to pass.
| Error at obtaining the boot time from journalctl
| RESULTS:
| RESULTS - systemd.SystemdJournalTests.test_systemd_boot_time - Testcase -1: SKIPPED (0.74s)
systemd.log_target=console was introduced by oe-core commit a0bb649 and
work with parameter systemd.log_level to enable systemd debug.
systemd.log_level has been removed already, so remove systemd.log_target
too to make case test_systemd_boot_time pass.
(From OE-Core rev: caa776bdcf8ea34c857f45970370bf771075f4bc)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Add a variable called TEST_QEMUPARAMS in testimage.bbclass to make it
possible to pass parameters to qemu. This can be useful for e.g.
increasing the amount of RAM available during testimage runs.
(From OE-Core rev: 1a9163f5779d233c884c8fd50e0812eabab4fdf3)
Signed-off-by: Erik Botö <erik.boto@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Enable testimage to support qemu slirp. Configure "QEMU_USE_SLIRP"
& "TEST_SERVER_IP" variables to enable slirp.
[YOCTO#10713]
(From OE-Core rev: 3df9ee85ce7fe52f0893fd33aea3bf1fcc6ead0a)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Now that the hangs in httpservice are fixed we can let these tests
auto skip as appropriate.
(From OE-Core rev: 42a0d70291d551578e21f590fcb85ca72a78ccb5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Now the test markup of the development tools tests is complete, this
can be further tweaked to auto run the correct tests.
(From OE-Core rev: bd4f8d12fe1f9f2643ee9e68fa2bb981134294fb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Now that the tests have correct markup to automatically determine which images
they can run against, clean up the default test suites logic to be simpler
and not image specific.
Some cleanup of the compiler tests still needs to be completed but this
is a good first step.
The only downside to this is more noise during testing as we now see
many skipped messages for simple images like core-image-minimal.
The auto type is being removed since it currently breaks badly due to the
socat mandatory inclusion from the meta-selftest layer which is a problem
which needs to be addressed seperately.
(From OE-Core rev: 4966bc33845752eb0aeae54b72e8ba0146a7ed52)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Fix for sumo context]
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Add test cases to test “exclude” and “installroot“ options, also modify
the logic of filtering packages on the feed to have all the packages
needed by the tests.
[YOCTO #10744]
(From OE-Core rev: 1121806603c6f621d084b692216f3f616a0768dc)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The KBUILD_BUILD_USER and KBUILD_BUILD_HOST variables were
assigned at the kernel class level, which made it impossible
to override them in the local configuration.
By setting only the default values of those variables in the
kernel class, it is now possible to override them as expected.
(From OE-Core rev: a3e8cdf9c3ba966fa4b5a21235540eb0b00fb487)
Signed-off-by: Federico Sauter <federico.sauter@ableton.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Fixed:
MACHINE = "qemux86"
QEMU_USE_KVM = "qemux86"
IMAGE_CLASSES += "testimage"
$ oe-selftest -r runqemu.RunqemuTests.test_boot_rootfs
[snip]
File "/buildarea1/lyang1/poky/meta/lib/oe/types.py", line 122, in boolean
raise ValueError("Invalid boolean value '%s'" % value)
ValueError: Invalid boolean value 'qemux86'
Now QEMU_USE_KVM can only be boolean, can not contain MACHINE any more, kvm
will be enabled if target_arch == build_arch or both of them are x86 archs.
(From OE-Core rev: 7c1a8a624cad8d967635c6cb5f99cf655bde3d44)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Some patch files create entirely new files, so their permissions are subject to
the host umask. If such a file is later installed into a package with no change
in permissions, it breaks the reproducibility of the package.
This was observed on libpam, for instance: The patch file
pam-security-abstract-securetty-handling.patch creates a new file
(tty_secure.c). This file is later copied into the -dbg package with no change
in permissions.
(From OE-Core rev: 2a2bbd755b330cd63f7f6e2f2b374a3ae065b37a)
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Fix the following warning.
ResourceWarning: unclosed file <_io.TextIOWrapper name='/.../systemd/1_239-r0/debugsources.list' mode='a' encoding='UTF-8'>
(From OE-Core rev: 91810a57f0edd8b37c5f3f989a5aca69d9a40b37)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Fixup for sumo context]
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
I think this lock dates from before we had sstate for do_packagedata.
Since WORKDIR is recipe specific and we write into WORKDIR, we no longer need
any write locks in the do_packagedata code itself, its handled by the sstate
task lock for the final copy in at the end. The final write lock can be simply
removed.
The only time we need read locking is when actually reading data from the
shared directory. We can therefore reduce the window the lock is held
significantly as well, hence improving the speed of packagedata tasks running
in parallel.
(From OE-Core rev: f7106cdf2190d9ec59132a1cb2bb431d653cd9c5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|