Age | Commit message (Collapse) | Author |
|
For example, core-image-sato skipped the test alltogether, as it
no longer pulls in Python 2.x at all.
(From OE-Core rev: 5ad0fe9ac6b6362011a17afaa7bee8e788093915)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The test cases assume that rpm-doc is built out, as it says it its
comment. This is not always true. And it sometimes results in
following error.
| cls.tc.target.copyTo(test_file, dst)
| UnboundLocalError: local variable 'test_file' referenced before assignment
Change to use base-passwd-doc, as this package is more likely to be
built out than rpm-doc.
(From OE-Core rev: 2e23543b48921182307065c1fa9e8b9d7fbb3cdc)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
As I will be leaving Intel, this address will no longer be valid,
so swap it for my personal one for now.
(From OE-Core rev: ea58ff101e28dfda3410de66d775df3d8a1e5a96)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
There are failures when multiple users run oe-selftest on the same
host:
PermissionError: [Errno 13] Permission denied: '/tmp/oe-saved-
tests/201812250324_qemu'
This is because /tmp/oe-saved-tests was created by user A, while user B tries
to write data in it, then the error will happen. This patch can fix the
problem.
Move the dumped data to ${LOG_DIR}/runtime-hostdump/ rather than
/tmp/oe-saved-tests/ to fix the problem.
(From OE-Core rev: e219fe5329599cd6c3682f521eaee3852a2c8980)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
When use simpleremote target the flash/boot process is executed
manually, the IMAGE_FSTYPES validation is only needed when execute
testimage against qemu.
The supported_fstypes comes from oeqa.core.target.qemu module.
(From OE-Core rev: e7dc5963adbacc091fe8943119262166977623ad)
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Boot parameter systemd.log_target=console affects command journalctl's
output and causes oe selftest case test_systemd_boot_time fail to pass.
| Error at obtaining the boot time from journalctl
| RESULTS:
| RESULTS - systemd.SystemdJournalTests.test_systemd_boot_time - Testcase -1: SKIPPED (0.74s)
systemd.log_target=console was introduced by oe-core commit a0bb649 and
work with parameter systemd.log_level to enable systemd debug.
systemd.log_level has been removed already, so remove systemd.log_target
too to make case test_systemd_boot_time pass.
(From OE-Core rev: caa776bdcf8ea34c857f45970370bf771075f4bc)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Add a variable called TEST_QEMUPARAMS in testimage.bbclass to make it
possible to pass parameters to qemu. This can be useful for e.g.
increasing the amount of RAM available during testimage runs.
(From OE-Core rev: 1a9163f5779d233c884c8fd50e0812eabab4fdf3)
Signed-off-by: Erik Botö <erik.boto@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Enable testimage to support qemu slirp. Configure "QEMU_USE_SLIRP"
& "TEST_SERVER_IP" variables to enable slirp.
[YOCTO#10713]
(From OE-Core rev: 3df9ee85ce7fe52f0893fd33aea3bf1fcc6ead0a)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Now that the hangs in httpservice are fixed we can let these tests
auto skip as appropriate.
(From OE-Core rev: 42a0d70291d551578e21f590fcb85ca72a78ccb5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Now the test markup of the development tools tests is complete, this
can be further tweaked to auto run the correct tests.
(From OE-Core rev: bd4f8d12fe1f9f2643ee9e68fa2bb981134294fb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Now that the tests have correct markup to automatically determine which images
they can run against, clean up the default test suites logic to be simpler
and not image specific.
Some cleanup of the compiler tests still needs to be completed but this
is a good first step.
The only downside to this is more noise during testing as we now see
many skipped messages for simple images like core-image-minimal.
The auto type is being removed since it currently breaks badly due to the
socat mandatory inclusion from the meta-selftest layer which is a problem
which needs to be addressed seperately.
(From OE-Core rev: 4966bc33845752eb0aeae54b72e8ba0146a7ed52)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Fix for sumo context]
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Add test cases to test “exclude” and “installroot“ options, also modify
the logic of filtering packages on the feed to have all the packages
needed by the tests.
[YOCTO #10744]
(From OE-Core rev: 1121806603c6f621d084b692216f3f616a0768dc)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The KBUILD_BUILD_USER and KBUILD_BUILD_HOST variables were
assigned at the kernel class level, which made it impossible
to override them in the local configuration.
By setting only the default values of those variables in the
kernel class, it is now possible to override them as expected.
(From OE-Core rev: a3e8cdf9c3ba966fa4b5a21235540eb0b00fb487)
Signed-off-by: Federico Sauter <federico.sauter@ableton.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Fixed:
MACHINE = "qemux86"
QEMU_USE_KVM = "qemux86"
IMAGE_CLASSES += "testimage"
$ oe-selftest -r runqemu.RunqemuTests.test_boot_rootfs
[snip]
File "/buildarea1/lyang1/poky/meta/lib/oe/types.py", line 122, in boolean
raise ValueError("Invalid boolean value '%s'" % value)
ValueError: Invalid boolean value 'qemux86'
Now QEMU_USE_KVM can only be boolean, can not contain MACHINE any more, kvm
will be enabled if target_arch == build_arch or both of them are x86 archs.
(From OE-Core rev: 7c1a8a624cad8d967635c6cb5f99cf655bde3d44)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Some patch files create entirely new files, so their permissions are subject to
the host umask. If such a file is later installed into a package with no change
in permissions, it breaks the reproducibility of the package.
This was observed on libpam, for instance: The patch file
pam-security-abstract-securetty-handling.patch creates a new file
(tty_secure.c). This file is later copied into the -dbg package with no change
in permissions.
(From OE-Core rev: 2a2bbd755b330cd63f7f6e2f2b374a3ae065b37a)
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Fix the following warning.
ResourceWarning: unclosed file <_io.TextIOWrapper name='/.../systemd/1_239-r0/debugsources.list' mode='a' encoding='UTF-8'>
(From OE-Core rev: 91810a57f0edd8b37c5f3f989a5aca69d9a40b37)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Fixup for sumo context]
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
I think this lock dates from before we had sstate for do_packagedata.
Since WORKDIR is recipe specific and we write into WORKDIR, we no longer need
any write locks in the do_packagedata code itself, its handled by the sstate
task lock for the final copy in at the end. The final write lock can be simply
removed.
The only time we need read locking is when actually reading data from the
shared directory. We can therefore reduce the window the lock is held
significantly as well, hence improving the speed of packagedata tasks running
in parallel.
(From OE-Core rev: f7106cdf2190d9ec59132a1cb2bb431d653cd9c5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
QEMU_USE_KVM can either be a boolean or a whitespace separated list
of kvm supported machines.
For the 'intel-corei7-64' machine, defined in meta-intel, kvm could not be
used as the 'x86' substring is not part of its machine name.
By changing the order of this 'or' statement and setting
the 'QEMU_USE_KVM' variable to 'intel-corei7-64', it is possible to run the
'testimage' task with kvm support successfully.
(From OE-Core rev: a22789253aa653dc50fb159b40910248c2f98dd4)
Signed-off-by: Emmanuel Roullit <emmanuel.roullit@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
warnings
Use our own lsb function instead as used elsewhere by the codebase.
(From OE-Core rev: acac45a6fd604d28ef7c23d67482af3d7e8bcfe3)
(From OE-Core rev: 570256a64af5a3fa994a20a5cc4c74d59ffc361f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 5s timeout for non-kvm is too short, especially when the load is high,
which leads to unexpected errors, so set timeout to 60s by default.
(From OE-Core rev: 8197d0f638a760fc03062c7a9009117d083d7ead)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
2018i:
Briefly:
São Tomé and Príncipe switches from +01 to +00 on 2019-01-01.
Changes to future timestamps
Due to a change in government, São Tomé and Príncipe switches back
from +01 to +00 on 2019-01-01 at 02:00. (Thanks to Vadim
Nasardinov and Michael Deckers.)
2018h:
Briefly:
Qyzylorda, Kazakhstan moved from +06 to +05 on 2018-12-21.
New zone Asia/Qostanay because Qostanay, Kazakhstan didn't move.
Metlakatla, Alaska observes PST this winter only.
Guess Morocco will continue to adjust clocks around Ramadan.
Add predictions for Iran from 2038 through 2090.
Changes to future timestamps
Guess that Morocco will continue to fall back just before and
spring forward just after Ramadan, the practice since 2012.
(Thanks to Maamar Abdelkader.) This means Morocco will observe
negative DST during Ramadan in main and vanguard formats, and in
rearguard format it stays in the +00 timezone and observes
ordinary DST in all months other than Ramadan. As before, extend
this guesswork to the year 2037. As a consequence, Morocco is
scheduled to observe three DST transitions in some Gregorian years
(e.g., 2033) due to the mismatch between the Gregorian and Islamic
calendars.
The table of exact transitions for Iranian DST has been extended.
It formerly cut off before the year 2038 in a nod to 32-bit time_t.
It now cuts off before 2091 as there is doubt about how the Persian
calendar will treat 2091. This change predicts DST transitions in
2038-9, 2042-3, and 2046-7 to occur one day later than previously
predicted. As before, post-cutoff transitions are approximated.
Changes to past and future timestamps
Qyzylorda (aka Kyzylorda) oblast in Kazakhstan moved from +06 to
+05 on 2018-12-21. This is a zone split as Qostanay (aka
Kostanay) did not switch, so create a zone Asia/Qostanay.
Metlakatla moved from Alaska to Pacific standard time on 2018-11-04.
It did not change clocks that day and remains on -08 this winter.
(Thanks to Ryan Stanley.) It will revert to the usual Alaska
rules next spring, so this change affects only timestamps
from 2018-11-04 through 2019-03-10.
Change to past timestamps
Kwajalein's 1993-08-20 transition from -12 to +12 was at 24:00,
not 00:00. I transcribed the time incorrectly from Shanks.
(Thanks to Phake Nick.)
Nauru's 1979 transition was on 02-10 at 02:00, not 05-01 at 00:00.
(Thanks to Phake Nick.)
Guam observed DST irregularly from 1959 through 1977.
(Thanks to Phake Nick.)
Hong Kong observed DST in 1941 starting 06-15 (not 04-01), then on
10-01 changed standard time to +08:30 (not +08). Its transition
back to +08 after WWII was on 1945-09-15, not the previous day.
Its 1904-10-30 change took effect at 01:00 +08 (not 00:00 LMT).
(Thanks to Phake Nick, Steve Allen, and Joseph Myers.) Also,
its 1952 fallback was on 11-02 (not 10-25).
This release contains many changes to timestamps before 1946 due
to Japanese possession or occupation of Pacific/Chuuk,
Pacific/Guam, Pacific/Kosrae, Pacific/Kwajalein, Pacific/Majuro,
Pacific/Nauru, Pacific/Palau, and Pacific/Pohnpei.
(Thanks to Phake Nick.)
Assume that the Spanish East Indies was like the Philippines and
observed American time until the end of 1844. This affects
Pacific/Chuuk, Pacific/Kosrae, Pacific/Palau, and Pacific/Pohnpei.
Changes to past tm_isdst flags
For the recent Morocco change, the tm_isdst flag should be 1 from
2018-10-27 00:00 to 2018-10-28 03:00. (Thanks to Michael Deckers.)
Give a URL to the official decree. (Thanks to Matt Johnson.)
(From OE-Core rev: 100d0d0f24cabedd1a89b69ac8ffb05d85663761)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Changes to code
When generating TZif files with leap seconds, zic no longer uses a
format that trips up older 32-bit clients, fixing a bug introduced
in 2018f. (Reported by Daniel Fischer.) Also, the zic workaround
for QTBUG-53071 now also works for TZif files with leap seconds.
The translator to rearguard format now rewrites the line
"Rule Japan 1948 1951 - Sep Sat>=8 25:00 0 S" to
"Rule Japan 1948 1951 - Sep Sun>=9 1:00 0 S".
This caters to zic before 2007 and to Oracle TZUpdater 2.2.0
and earlier. (Reported by Christos Zoulas.)
Changes to past time zone abbreviations
Change HDT to HWT/HPT for WWII-era abbreviations in Hawaii.
This reverts to 2011h, as the abbreviation change in 2011i was
likely inadvertent.
Changes to documentation
tzfile.5 has new sections on interoperability issues.
(From OE-Core rev: a24d0c174411a32a2793c89980ca87c4f9d98bc4)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes to code
When generating TZif files with leap seconds, zic no longer uses a
format that trips up older 32-bit clients, fixing a bug introduced
in 2018f. (Reported by Daniel Fischer.) Also, the zic workaround
for QTBUG-53071 now also works for TZif files with leap seconds.
The translator to rearguard format now rewrites the line
"Rule Japan 1948 1951 - Sep Sat>=8 25:00 0 S" to
"Rule Japan 1948 1951 - Sep Sun>=9 1:00 0 S".
This caters to zic before 2007 and to Oracle TZUpdater 2.2.0
and earlier. (Reported by Christos Zoulas.)
Changes to past time zone abbreviations
Change HDT to HWT/HPT for WWII-era abbreviations in Hawaii.
This reverts to 2011h, as the abbreviation change in 2011i was
likely inadvertent.
Changes to documentation
tzfile.5 has new sections on interoperability issues.
(From OE-Core rev: 32e5dd919a61b1c245fb6a867d0ea4a71d394aca)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is useful for debugging.
(From OE-Core rev: da527d73f5eeae0f29b5f99aab757491d3f87ec7)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Currently these are in ${PN} and ${PN}-syslog may get replaced by
other packages but update-alternatives would error in the postinst
if other files were installed first. Avoid the problems by putting
the links in the correct package.
(From OE-Core rev: ef11c54ba99af261a70ec31091216cdd1556da24)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Tweak the preceeding commit to:
* Add STARTTIME to the identifier to make it unique
* Add MACHINE to the identifier
* Use LOG_DIR
* Store the layer config in a more natural json format
* Drop '_' function prefixes
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Tweak the preceeding commit to:
* Add STARTTIME to the identifier to make it unique
* Log DISTRO
* Use LOG_DIR
* Store the layer config in a more natural json format
* Drop '_' function prefixes
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
2018-12-06 23:19:24,564 - oe-selftest - INFO - Traceback (most recent call last):
File "/media/build1/poky-sumo/meta/lib/oeqa/core/case.py", line 32, in _oeSetUpClass
clss.setUpClassMethod()
File "/media/build1/poky-sumo/meta/lib/oeqa/selftest/cases/eSDK.py", line 78, in setUpClass
cls.tmpdir_eSDKQA = cls.tempdirobj.name
AttributeError: type object 'oeSDKExtSelfTest' has no attribute 'tempdirobj'
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
defaultsetup.conf and therefore default-versions.inc is sourced pretty late in bitbake.conf.
default-versions.inc overwrites previous assignments of PREFERRED_VERSION_openssl.
Assigning it with ?= allows other .conf files to assign correctly.
in particular assignment in conf/local.conf and machine config is used instead of default.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
INFO - ======================================================================
INFO - ERROR: setUpClass (eSDK.oeSDKExtSelfTest)
INFO - ----------------------------------------------------------------------
INFO - Traceback (most recent call last):
File "/home/pokybuild/yocto-worker/oe-selftest-debian/build/meta/lib/oeqa/core/case.py", line 32, in _oeSetUpClass
clss.setUpClassMethod()
File "/home/pokybuild/yocto-worker/oe-selftest-debian/build/meta/lib/oeqa/selftest/cases/eSDK.py", line 76, in setUpClass
cls.tmpdirobj = tempfile.TemporaryDirectory(prefix="selftest-esdk-", dir=bb_vars["WORKDIR"])
File "/usr/lib/python3.5/tempfile.py", line 929, in __init__
self.name = mkdtemp(suffix, prefix, dir)
File "/usr/lib/python3.5/tempfile.py", line 507, in mkdtemp
_os.mkdir(file, 0o700)
FileNotFoundError: [Errno 2] No such file or directory: '/home/pokybuild/yocto-worker/oe-selftest-debian/build/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/selftest-esdk-q7ln84gc'
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
break tests
Having image-buildinfo enabled causes containerimage.ContainerImageTests.test_expected_files
to fail due to the presence of an unexpected file:
['./',
'./etc/',
- './etc/build',
'./etc/default/',
'./etc/default/postinst',
Tweak the class to allow it to be disabled and disable it from the test just in
case it was enabled.
(From OE-Core rev: af67bf422a4df5b7e07894512ff73a5f493682ab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The python git module may or may not be enabled, allow this code to
function without it, falling back to the same method as metadata_scm.bbclass
uses. This will be cleaned up in the next round of feature development.
(From OE-Core rev: 6350586ba9f4a4107a2d457590824cd4d662d5b9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently sdk & sdkext will output json file to LOG_DIR, while
selftest will output json file to TOPDIR/log.
Standardize selftest json output file to LOG_DIR.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Tweak the preceeding commit to:
* Add STARTTIME to the identifier to make it unique
* Use LOG_DIR
* Store the layer config in a more natural json format
* Drop '_' function prefixes
(From OE-Core rev: 173f59acf9722e2ef27fdd49c20f7d3d664917eb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As part of the solution to replace Testopia to store testresult,
OEQA sdk and sdkext need to output testresult into json files, where
these json testresult files will be stored into git repository
by the future test-case-management tools.
By default, json testresult file will be written to "oeqa"
directory under the "WORKDIR" directory.
To configure multiple instances of bitbake to write json testresult
to a single testresult file at custom directory, user will define
the variable "OEQA_JSON_RESULT_DIR" with the custom directory for
json testresult.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As part of the solution to replace Testopia to store testresult,
OEQA testimage need to output testresult into json files, where
these json testresult files will be stored into git repository
by the future test-case-management tools.
By default, json testresult file will be written to "oeqa"
directory under the "WORKDIR" directory.
To configure multiple instances of bitbake to write json testresult
to a single testresult file at custom directory, user will define
the variable "OEQA_JSON_RESULT_DIR" with the custom directory for
json testresult.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As part of the solution to replace Testopia to store testresult,
OEQA selftest need to output testresult into json files, where
these json testresult files will be stored into git repository
by the future test-case-management tools.
By default, json testresult file will be written to "oeqa"
directory under the oe-selftest log directory.
To configure multiple instances of bitbake to write json testresult
to a single testresult file at custom directory, user will define
the variable "OEQA_JSON_RESULT_DIR" with the custom directory for
json testresult.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We want to see failures/errors listed last since this is the most easily
visible part of the log on consoles or autobuilder output and makes
human processing easier rather than having to scroll up and scan for
a single failure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Its useful to have the counts of success/failure/error/skipped at the end of the
results to allow for easier human reading of what happened.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows the ptest results from ptest-runner, run in an image to be
transferred over to the resulting json results output.
Each test is given a pass/skip/fail so individual results can be monitored
and the raw log output from the ptest-runner is also dumped into the
results json file as this means after the fact debugging becomes much easier.
Currently the log output is not split up per test but that would make a good
future enhancement.
I attempted to implement this as python subTests however it failed as the
output was too confusing, subTests don't support any kind of log
output handling, subTest successes aren't logged and it was making things
far more complex than they needed to be.
We mark ptest-runner as "EXPECTEDFAILURE" since its unlikely every ptest
will pass currently and we don't want that to fail the whole image test run.
Its assumed there would be later analysis of the json output to determine
regressions. We do have to change the test runner code so that
'unexpectedsuccess' is not a failure.
Also, the test names are manipuated to remove spaces and brackets with
"_" used as a replacement and any duplicate occurrences truncated.
(From OE-Core rev: a13e088942e2a3c3521e98954a394e61a15234e8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As part of the solution to replace Testopia to store testresult,
OEQA need to output testresult into single json file, where json
testresult file will be stored in git repository by the future
test-case-management tools.
The json testresult file will store more than one set of results,
where each set of results was uniquely identified by the result_id.
The result_id would be like "runtime-qemux86-core-image-sato", where
it was a runtime test with target machine equal to qemux86 and running
on core-image-sato image. The json testresult file will only store
the latest test content for a given result_id. The json testresult
file contains the configuration (eg. COMMIT, BRANCH, MACHINE, IMAGE),
result (eg. PASSED, FAILED, ERROR), test log, and result_id.
Based on the destination json testresult file directory provided,
it could have multiple instances of bitbake trying to write json
testresult to a single testresult file, using locking a lockfile
alongside the results file directory to prevent races.
Also the library class inside this patch will be reused by the future
test-case-management tools to write json testresult for manual test
case executed.
(From OE-Core rev: 00e03b5004f1eb6d59295544b3a8620504278f51)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Refactor the original _getDetailsNotPassed method to return
testresult details (test status and log), which will be reused
by future OEQA code to write json testresult.
Take the opportunity to consolidate and simplify the logic used
to gather test status and log within the TestResult instance.
(From OE-Core rev: 79ee7d1c371a86edeb61c99679985118da657e5d)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This isn't present on modern distros by default and doesn't work with
testtools, needing multiple code paths in the code. Remove it in favour
of finding a better replacement for results collection/analysis.
(From OE-Core rev: 8001d933a8dc86004db014777f094d718086687d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There doesn't appear to be any reason we need this _results indirection
any more so remove it.
(From OE-Core rev: b618261811c48ff3b98eab1b340a8cd09ef183c6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have several options for parallel processing in oeqa, parallel
execution of modules, threading and mulitple processes for the runners.
After much experimentation is appears the most scalable and least
invasive approach is multiple processes using concurrenttestsuite
from testtools. This means we can drop the current threading code
which is only used by the sdk test execution.
oeqa/decorator/depends: Remove threading code
Revert "oeqa/sdk: Enable usage of OEQA thread mode"
This reverts commit adc434c0636b7dea2ef70c8d2c8e61cdb5c703b1.
Revert "oeqa/core/tests: Add tests of OEQA Threaded mode"
This reverts commit a4eef558c9933eb32413b61ff80a11b999951b40.
Revert "oeqa/core/decorator/oetimeout: Add support for OEQA threaded mode"
This reverts commit d3d4ba902dee8b19fa1054330cffdf73f9b81fe7.
(From OE-Core rev: a98ab5e560e73b6988512fbae5cefe9e42ceed53)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current code assumes if something isn't a failure of some
kind, it was a pass. When test case IDs weren't matching, this lead
to very confusing output where things would fail, then be listed as
passing.
This adds code to track successes, ensuring we don't end up in this
position again with unmatched entries being listed as UNKNOWN.
(From OE-Core rev: 4374c296d8963e4f6a1aa7bef7983ad0a1c2fcff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We can directly compare the test case IDs rather than representations,
then if we're using subunit to split the tests, the comparisions still
work as intended.
(From OE-Core rev: 72e5f46f75454ba4c445c65c1cbc616a9e72fc6e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The existing logfile is simply placed in the current directory. Since the test
changes cwd to BUILDDIR, the symlink to the log can be placed in an invalid
directory. We also see trackbacks if the symlink is invalid.
Improve things by:
* Placing logs in LOG_DIR (or BUILDDIR if unset).
* Using a full path to the log meaning the log and link are placed in the same directory.
* Using lexists instead of exists so invalid symlinks are handled correctly.
(From OE-Core rev: 750ece11bed0e62a11e0003d1d16a81f7c219761)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix the warnings:
meta/lib/oeqa/utils/qemurunner.py:250: DeprecationWarning: invalid escape sequence \.
ips = re.findall("((?:[0-9]{1,3}\.){3}[0-9]{1,3})", cmdline.split("ip=")[1])
meta/lib/oeqa/utils/qemurunner.py:343: DeprecationWarning: invalid escape sequence \-
if re.search("root@[a-zA-Z0-9\-]+:~#", output):
poky/meta/lib/oeqa/utils/qemurunner.py:350: DeprecationWarning: invalid escape sequence \-
if re.search("root@[a-zA-Z0-9\-]+:~#", output):
meta/lib/oeqa/utils/qemurunner.py:448: DeprecationWarning: invalid escape sequence \-
if re.search("[a-zA-Z0-9]+@[a-zA-Z0-9\-]+:~#", data):
by correctly marking the regexs.
(From OE-Core rev: 8e6987735002560fca714f77ea8ece9d4b28f7fa)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Avoid the warning:
meta/lib/oeqa/selftest/context.py:8: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses
import imp
In this case importlib is a direct replacement.
(From OE-Core rev: db7a60c36a2d3eefc61ae6e1ede01680dc932035)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|