| Age | Commit message (Collapse) | Author |
|---|
|
All test id (eg. @alias) inside manual testcase file shall follow the same
test id naming convention from oeqa automated tests (eg. selftest,
runtime, sdk, etc), where the test id consists of
<test_module>.<test_suite>.<test_function>. Furthermore, there shall be
only 1 unique test_module per each manual testcases file, where
test_module match the file name itself.
This file was using test_module name that does not match the file name
itself. Fixed test_module name as well as the test_suite name.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
As part of the solution to replace Testopia, manual test cases
need to be migrated to OEQA. These manual test case json files
will serve two use cases.
Use case#1: as input to the future commandline-based manual test
runner script, where this script will display actions and expected
result information in user friendly text, then it will capture
user input for test result and log, finally it will write test
result and log into existing standardize test result json format
from OEQA framework for automated tests.
Use case#2: QA will open and read these json file manually for
planning manual test execution. Any reader interested in
understanding manual test cases will open and read these files.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
All test id (eg. @alias) inside manual testcase file shall follow the same test id
naming convention from oeqa automated tests (eg. selftest, runtime, sdk, etc), where
the test id consists of <test_module>.<test_suite>.<test_function>. Furthermore,
there shall be only 1 unique test_module per each manual testcases file.
This file was using more than 1 unique test_module for testcases. Furthermore,
some of the testcases were defined using different test_suite where it was not needed.
This patch fix the manual testcases file to have only 1 unique test_module
as well as test_suite to simplify test id naming.
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Two changes made in oeqa/manual/compliance-test.json:
1. All test id (eg. @alias) inside manual testcase file shall follow the same test id
naming convention from oeqa automated tests (eg. selftest, runtime, sdk, etc), where
the test id consists of <test_module>.<test_suite>.<test_function>. Furthermore,
there shall be only 1 unique test_module per each manual testcases file.
This file was using more than 1 unique test_module for testcases. Furthermore, some of
the testcases were defined using different test_suite where it was not needed. This patch
fix the manual testcases file to have only 1 unique test_module as well as test_suite to
simplify test id naming.
2. Added 2 missing test cases for Beaglebone Stress Test.
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Two changes made in oeqa/manual/bsp-hw.json:
1. All test id (eg. @alias) inside manual testcase file shall follow the same test id naming
convention from oeqa automated tests (eg. selftest, runtime, sdk, etc), where the
test id consists of <test_module>.<test_suite>.<test_function>. Furthermore,
there shall be only 1 unique test_module per each manual testcases file.
This file was using more than 1 unique test_module for testcases.
Furthermore, some of the testcases were defined using different test_suite where it was not
needed. This patch fix the manual testcases file to have only 1 unique
test_module as well as test_suite to simplify test id naming.
2. As per review by Intel and Windriver team, 7 testcases were found obsolete. Removed 7 testcases.
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
QA team found that 10 manual bsp test cases from Testopia for
Beaglebone, EdgeRouter, and MPC need to be up streamed
[YOCTO #12650]
Signed-off-by: Mazliana <mazliana.mohamad@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Manual test step for SDK is updated. Previously toolchain was "poky-glibc-x86_64-core-image-sato-sdk<type-arch>-toolchain-<release-version>.sh"
But toochain for core-image-sato-sdk is not available in releases after 2.1, hence changed it to "poky-glibc-x86_64-core-image-sato-<type-arch>-toolchain-<release-version>.sh
Other less significant update is to add exepcted result in intermediate test steps.
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
"poky-glibc-x86_64-core-image-sato-<type-arch>-toolchain-<release-version>.sh"
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Added json file for compliance test cases to the manual runtime tests
Signed-off-by: Sudhir Sharma <sudhirx.sharma@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Now QEMU_USE_KVM can only be boolean, can not contain MACHINE any more.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The nightly-build-appliance target already tests this particular build.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The autobuilder runs bitbake-selftest already so we don't need
to execute this manually.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
As part of the solution to replace Testopia, manual test cases
need to be migrated to OEQA. These manual test case json files
will serve two use cases.
Use case#1: as input to the future commandline-based manual test
runner script, where this script will display actions and expected
result information in user friendly text, then it will capture
user input for test result and log, finally it will write test
result and log into existing standardize test result json format
from OEQA framework for automated tests.
Use case#2: QA will open and read these json file manually for
planning manual test execution. Any reader interested in
understanding manual test cases will open and read these files.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The parent code currently assumed that any parent branch is locally
checked out which may not be the case.
Use the local branch by default but fall back to the origin. This
also means removing the later saftey check as the branch may not exist
locally.
This fixes the autobuilder resulttool test pushing code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This supports glibc 2.29 which is appearing in distros like Ubuntu 19.04
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Fixed up for Sumo context; no aarch64]
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These functions can be reused by the resulttool code so move to the common
function library for this purpose.
(From OE-Core rev: c66f848938c04e133259c5b6903dc592866ab385)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This turns the core of the script into a library function. Ultimately this
will let us call that code with custom 'keywords' rather than relying
on the data parsed from bitbake metadata which can't be used when archiving
historical results.
(From OE-Core rev: 4820ca2b0850e29b04a4fd5659a6e9837d6714d0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a combined patch of the various tweaks and improvements I
made to resulttool:
* Avoid subprocess.run() as its a python 3.6 feature and we
have autobuilder workers with 3.5.
* Avoid python keywords as variable names
* Simplify dict accesses using .get()
* Rename resultsutils -> resultutils to match the resultstool ->
resulttool rename
* Formalised the handling of "file_name" to "TESTSERIES" which the code
will now add into the json configuration data if its not present, based
on the directory name.
* When we don't have failed test cases, print something saying so
instead of an empty table
* Tweak the table headers in the report to be more readable (reference
"Test Series" instead if file_id and ID instead of results_id)
* Improve/simplify the max string length handling
* Merge the counts and percentage data into one table in the report
since printing two reports of the same data confuses the user
* Removed the confusing header in the regression report
* Show matches, then regressions, then unmatched runs in the regression
report, also remove chatting unneeded output
* Try harder to "pair" up matching configurations to reduce noise in
the regressions report
* Abstracted the "mapping" table concept used to pairing in the
regression code to general code in resultutils
* Created multiple mappings for results analysis, results storage and
'flattening' results data in a merge
* Simplify the merge command to take a source and a destination,
letting the destination be a directory or a file, removing the need for
an output directory parameter
* Add the 'IMAGE_PKGTYPE' and 'DISTRO' config options to the regression
mappings
* Have the store command place the testresults files in a layout from
the mapping, making commits into the git repo for results storage more
useful for simple comparison purposes
* Set the oe-git-archive tag format appropriately for oeqa results
storage (and simplify the commit messages closer to their defaults)
* Fix oe-git-archive to use the commit/branch data from the results file
* Cleaned up the command option help to match other changes
* Follow the model of git branch/tag processing used by oe-build-perf-report
and use that to read the data using git show to avoid branch change
* Add ptest summary to the report command
* Update the tests to match the above changes
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OEQA outputs test results into json files and these files were
archived by Autobuilder during QA releases. Example: each oe-selftest
run by Autobuilder for different host distro generate a
testresults.json file.
These scripts were developed as a test result tools to manage
these testresults.json file.
Using the "store" operation, user can store multiple testresults.json
files as well as the pre-configured directories used to hold those files.
Using the "merge" operation, user can merge multiple testresults.json
files to a target file.
Using the "report" operation, user can view the test result summary
for all available testresults.json files inside a ordinary directory
or a git repository.
Using the "regression-file" operation, user can perform regression
analysis on testresults.json files specified. Using the "regression-dir"
and "regression-git" operations, user can perform regression analysis
on directory and git accordingly.
These resulttool operations expect the testresults.json file to use
the json format below.
{
"<testresult_1>": {
"configuration": {
"<config_name_1>": "<config_value_1>",
"<config_name_2>": "<config_value_2>",
...
"<config_name_n>": "<config_value_n>",
},
"result": {
"<testcase_namespace_1>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
"<testcase_namespace_2>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
...
"<testcase_namespace_n>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
}
},
...
"<testresult_n>": {
"configuration": {
"<config_name_1>": "<config_value_1>",
"<config_name_2>": "<config_value_2>",
...
"<config_name_n>": "<config_value_n>",
},
"result": {
"<testcase_namespace_1>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
"<testcase_namespace_2>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
...
"<testcase_namespace_n>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
}
},
}
To use these scripts, first source oe environment, then run the
entry point script to look for help.
$ resulttool
To store test result from oeqa automated tests, execute the below
$ resulttool store <source_dir> <git_branch>
To merge multiple testresults.json files, execute the below
$ resulttool merge <base_result_file> <target_result_file>
To report test report, execute the below
$ resulttool report <source_dir>
To perform regression file analysis, execute the below
$ resulttool regression-file <base_result_file> <target_result_file>
To perform regression dir analysis, execute the below
$ resulttool regression-dir <base_result_dir> <target_result_dir>
To perform regression git analysis, execute the below
$ resulttool regression-git <source_dir> <base_branch> <target_branch>
[YOCTO# 13012]
[YOCTO# 12654]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Pertinent fix for OE-Core since 2.10.6:
Fix: out of memory error handling
Fix: access migrate_disable field directly
Prevent allocation of buffers if exceeding available memory
2.10.9 also contains the necessary fix to support kernel up to 5.0.
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
This fixes the native build on glibc 2.28 hosts, by backporting two
gnulib patches from master.
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
During the test logrotate.LogrotateTest.test_1_logrotate_setup,
there is below logic:
# mkdir $HOME/logrotate_dir
# sed -i "s#wtmp {#wtmp {\n olddir $HOME/logrotate_dir#" /etc/logrotate.d/wtmp
After all logrotate.LogrotateTest finished, only cleanup
$HOME/logrotate_dir as below, but don't restore
the config file /etc/logrotate.d/wtmp.
[snip]
def tearDownClass(cls):
cls.tc.target.run('rm -rf $HOME/logrotate_dir')
[snip]
That's to say, there is one additional line added
to /etc/logrotate.d/wtmp and will make the logrotate
service start failed when run systemd.SystemdBasicTests.test_systemd_failed
Take an example as below when run test as root:
# cat /etc/logrotate.d/wtmp
# no packages own wtmp -- we'll rotate it here
/var/log/wtmp {
olddir /root/logrotate_dir
missingok
monthly
create 0664 root utmp
minsize 1M
rotate 1
}
# ls /root/logrotate_dir
ls: cannot access '/root/logrotate_dir': No such file or directory
# systemctl start logrotate
Job for logrotate.service failed because the control process exited with error code.
See "systemctl status logrotate.service" and "journalctl -xe" for details.
# systemctl status logrotate
logrotate.service - Rotate log files
Loaded: loaded (/lib/systemd/system/logrotate.service; static; vendor preset>
Active: failed (Result: exit-code) since Wed 2019-02-13 03:35:19 UTC; 7s ago
Docs: man:logrotate(8)
man:logrotate.conf(5)
Process: 540 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=1/FAILURE)
Main PID: 540 (code=exited, status=1/FAILURE)
Feb 13 03:35:18 qemumips systemd[1]: Starting Rotate log files...
Feb 13 03:35:19 qemumips logrotate[540]: error: wtmp:9 error verifying olddir path /root/logrotate_dir: No such file or directory
Feb 13 03:35:19 qemumips logrotate[540]: error: found error in file wtmp, skipping
Feb 13 03:35:19 qemumips systemd[1]: logrotate.service: Main process exited, code=exited, status=1/FAILURE
Feb 13 03:35:19 qemumips systemd[1]: logrotate.service: Failed with result 'exit-code'.
Feb 13 03:35:19 qemumips systemd[1]: Failed to start Rotate log files.
Add the logic to restore /etc/logrotate.d/wtmp to
make the cleanup complete to fix the above issue.
(From OE-Core rev: a2db9320d97d12d87524ff16a329f9c38a8da33f)
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Apply patches from systemd_237-3ubuntu10.13 to fix CVE-2019-6454.
CVE-2019-6454 is an issue in which systemd (PID1) can be crashed
with a specially formed D-Bus message.
For information see:
https://usn.ubuntu.com/3891-1/
https://git.launchpad.net/ubuntu/+source/systemd/commit/?h=applied/ubuntu/bionic-updates&id=d7584b894afcaa8a4a1abb69db2a9c81a6276e80
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
Apply patches to fix CVE-2018-6954
NVD description from https://nvd.nist.gov/vuln/detail/CVE-2018-6954
systemd-tmpfiles in systemd through 237 mishandles symlinks present in
non-terminal path components, which allows local users to obtain
ownership of arbitrary files via vectors involving creation of a
directory and a file under that directory, and later replacing that
directory with a symlink. This occurs even if the fs.protected_symlinks
sysctl is turned on.
Patches from systemd_237-3ubuntu10.13.debian.
These patches shouldn't be required on newer OE releases since they use
systemd v239 or higher.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
Affects < v240
Signed-off-by: Marcus Cooper <marcusc@axis.com>
>From v2 patch on openembedded-core@lists.openembedded.org
Incresed file name number from 0026 to 0027.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
Affects < v240
Based on thud commit d5d2b821fc85b8cf39f683061ac2a45bddd2139f
The second patch in the thud commit doesn't apply against 237. Use the
version of the second patch CVE-2018-16865_2.patch from
systemd_237-3ubuntu10.13.debian.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
Affects < v240
Based on thud commit 403e74b07b6f3c4a2444e68c74a8434fb17aee49
The patch in the thud commit doesn't compile against 237. Use the
version of this patch, CVE-2018-16864.patch from
systemd_237-3ubuntu10.13.debian.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
Backport patch to fix the following CVE.
CVE: CVE-2018-15688
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cherry-picked from thud 13591d7224393dc0ae529a03cdf74aceb3540ce9
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
Backport patch to fix the following CVE.
CVE: CVE-2018-15687
Based on thud commit eeb621aa19f690971caf862290a172a115578ba1
The patch in the thud commit doesn't compile against 237. Use the
version of this patch, CVE-2018-15687.patch from
systemd_237-3ubuntu10.13.debian.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
Backport patch to fix the following CVE.
CVE: CVE-2018-15686
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cherry-picked from thud 0ef70603bc983315eb0e8a97958d995a31198c35
Signed-off-by: George McCollister <george.mccollister@gmail.com>
|
|
This regression has been introduced while upgrading to version 237
(commit 906230a73b3ccfa4afd2a19a6b0aa18cd1d5fa08)
and seems to only affect sumo version.
Signed-off-by: Matthieu Rogez <matthieu.rogez@fivesgroup.com>
|
|
The test works by excluding curl-dev which curl-staticdev depends upon.
When static libraries aren't disabled, this leads to an odd looking test
failure.
Simply exclude curl-staticdev as well in case its enabled to make sure
the test always works.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Start opkg/dpkg as soon as the respective package managers status
file is present, no matter whether /etc/$pm-postinsts exists. This
decouples the implicit link between postinsts scripts in /etc and
the package manager: Currently the package manager is only started
if those scripts are present, although the package manager does not
use those scripts at all! Package managers install their own set of
postinst scripts.
The behavior when using rpm packages stays the same.
Note that using the package managers capability to execute postinst
scripts is preferred for good reasons: It makes sure that the
package managers database reflects that the packages have been
completely installed and configured.
This change allows to drop installation of the postinsts scripts
when package management is present. This will be done in a separate
change.
Note: Before commit 5aae19959a44 ("rootfs.py: Change logic to
unistall packages") rootfs.py did not install /etc/$pm-postinsts
when package management is installed! The change caused YOCTO #8235
which lead to the behavior change of run-postinsts in first place.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
| error: create archive failed on file /media/build1/poky/build/tmp/work/all-poky-linux/xcursor-transparent-theme/0.1.1+gitAUTOINC+23c8af5ba4-r0/deploy-sources/allarch-poky-linux/xcursor-transparent-theme-0.1.1+gitAUTOINC+23c8af5ba4-r0/xcursor-transparent-theme-0.1.1+git0+23c8af5ba4-r0.src.rpm: cpio: read failed - No such file or directory
| Building target platforms: noarch-poky-linux
| Building for target noarch-poky-linux
This is caused by:
$ cat log.task_order
do_cleansstate (24289): log.do_cleansstate.24289
do_deploy_archives_setscene (24395): log.do_deploy_archives_setscene.24395
do_fetch (24407): log.do_fetch.24407
[..]
do_package_write_rpm (25448): log.do_package_write_rpm.25448
do_package_qa (25451): log.do_package_qa.25451
So do_deploy_archives can run from sstate, created a .src.rpm in WORKDIR/deploy-sources,
then it was removed when rpm was running. This leads to a broken Source line in the
spec file as the original file was found by the os.listdir().
This fix is just a bandaid over much more fundamental problems sadly.
(From OE-Core rev: a10020ace4c3cd863c782760f7cbecea557ec6e7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The package_rpm code is writing outside the task's sstate directory into
the sstate of do_deploy_archives. This is "out of spec" since if the
task is installed from sstate, the files are not restored. This means
the files may appear/disappear, things are not deterministic and there are
races.
Extend the do_package_write_rpm code to handle writing the src.rpm into
place to avoid these issues. There are other problems but this avoids races
around this file.
(From OE-Core rev: c6e151ba7fe0f14044537cf0ab2cac436f1496e3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
On a system without ccache, f you:
INHERIT += "ccache"
bitbake libtool-cross
<remove INHERIT>
bitbake apmd
then it fails due to being unable to find ccache. The references to ccache are
coded into libtool-cross but the sstate checksum doesn't reflect this due to the
way the class is coded (output should be the same regardless).
The simplest solution is to remove references to ccache from the libtool script.
The output then works regardless of whether ccache is present or not. The
libtool-cross script is only used in a handful of cases (most of the time its
dynamically generated by autoconf) so any performance issue is minor.
(From OE-Core rev: ed550a49d2114c56e5bc033ecd0e83073d2d4067)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
(From OE-Core rev: 28fc470e5e10ee9cce893d037ed5e518bc5612f5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Without this patch /usr/bin/libtoolize is different for each multilib
since their host-triplets are different, despite there being no difference in
the functionality of libtoolize itself.
This change just patches out the problematic line since its just a comment for the user
in help text. Ugly but solves the problem. This fixes issues where libtool and
libXX-libtool couldn't be installed into the same system.
(From OE-Core rev: f70040fd3ca3508d33ed24c749c0b8095b020dab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Whilst the package managers handle multilib ELF binaries well, they don't
handle scripts in the *bindir directories well. This adds support for
marking these up so that they can be handled using update-alternatives.
Its done this way so that non-multilib systems don't see any changes and
there is standardisation amongst the multilibs on how the alternatives are
named and prioritiesd. The priotitisation code needs to be added but this
change means there is somewhere to add it.
Recipe needs to set MULTILIB_SCRIPTS in the form <pkgname>:<scriptname>, e.g.
MULTILIB_SCRIPTS = "${PN}-dev:${bindir}/file1 ${PN}:${base_bindir}/file2"
to indicate which script files to process from which packages.
libtool is used a as a reference to stop the libtool scripts conflicting
in a multilib case and allows the kernel-devsrc change to be merged.
(From OE-Core rev: 18e837433d07cfdce4019c13f682c6676425a2ad)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
As per the previous commit, upstream cpio has a bug which means it crashes on
append. If the image being built has already had testimage ran then cpio-native
will be in the sysroot. It's also possible that some distributions are shipping
this broken CVE patch too.
Now that our cpio-native is fixed, until we can be sure that the host cpio isn't
broken depend on cpio-native if building a cpio image.
[ YOCTO #13042 ]
(From OE-Core rev: c3b9aedcbe538d7fa74bd814644b4899769dec46)
(From OE-Core rev: a75eba71145efa1c3d206c5e5c00608a50f013bc)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The upstream fix for CVE-2016-2037 introduced a read from uninitialized memory
bug when appending to an existing archive, which is an operation we perform when
building an image.
(From OE-Core rev: 046e3e1fca925febf47b3fdd5d4e9ee2e1fad868)
(From OE-Core rev: 2ff6ab2e2944c6a53523b4b1611e1d22f6393500)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
oe-selftest's devtool tests have been broken since commit 2457cd57
(oe-selftest: devtool: avoid parallel races by using temporary copy of
core) if meta is a symbolic link.
(From OE-Core rev: daba6c5a991b370709d17e51305334f55a3858ec)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Some of the devtool tests make changes to files under meta/ -
legitimately since we want these tests to be working with real recipes
and associated files. Unfortunately with the new oe-selftest
parallelisation this can break other tests if files go missing at the
wrong time (among other scenarios). To avoid this issue, simply take a
copy of the core repository and use that for these tests. (We copy the
entire repository since changing the path of meta/ influences COREBASE
and thus we need to have things like scripts/ alongside as well).
(From OE-Core rev: 2457cd57b4195924ef127f497efa2f34f411e660)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The checksum value is only calculated if the uninative class is
inherited, so check for inherit before adding it to local.conf
(From OE-Core rev: 3b5b832589d943700b273e3a4d83561be0c47f36)
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
testimage.bbclass installs a SIGTERM handler which conflicts with the
use of multiprocessing here. This is paritcularly problematic if the http
service is terminated before its started and hence before its had a chance
to reset the default signal handler (as the code was written).
Instead, temporarily remove testimage's handler whilst forking the http process
which means the correct handler is installed and won't deadlock.
Also take the opportunity to add in some log messages about the server start
and shutdown so that future debugging is easier and its clearer what the code
is doing.
(From OE-Core rev: cc0471439aa0085ca87deccf061c5b676ef12388)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
During debugging dnf issue, we found that the test_dnf_install
PASSED the testing even though the environment does not allow
dnf install to run successfully. Further debugging had identified
that current test_dnf_install will execute dnf install even when
the package to be installed already exist, thus dnf install
will just skipped and this test will PASSED even though it was
not.
To solve this, added additional logic to check if the package
to be installed already exist, if yes then remove the package
before actually run dnf install. This will make sure dnf install
was tested as expected.
(From OE-Core rev: 4f662b253f7313c4e02bfafb527cdac076b6309a)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
Yeoh Ee Peng
sangeeta jain
Mazliana
Sudhir Sharma
Robert Yang
Richard Purdie
Jonathan Rajotte-Julien
Stefan Müller-Klieser
Martin Jansa
Mingli Yu
George McCollister
Marcus Cooper
Chen Qi
ROGEZ Matthieu
Stefan Agner
Ross Burton
Peter Kjellerstedt
Paul Eggleton
Jeremy Puhlman