| Age | Commit message (Collapse) | Author |
|---|
|
Integrating the following mainline destined commits to fix PAT issues with
32bit x86 and qemu:
bc22b90fb583 x86/pat: Document the PAT initialization sequence
c534b1ec1991 x86/xen, pat: Remove PAT table init code from Xen
cd47692e804f x86/mtrr: Fix PAT init handling when MTRR is disabled
039434bdc165 x86/mtrr: Fix Xorg crashes in Qemu sessions
c08196e8064c x86/mm/pat: Replace cpu_has_pat with boot_cpu_has()
6928fce8c766 x86/mm/pat: Add pat_disable() interface
3163c8d5468d x86/mm/pat: Add support of non-default PAT MSR setting
With this change applied, we once again have working graphics and no special
work arounds.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit 94abdb2eea610b174064978d2fb8354a6231fc0c.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
enabling AHCI runtime PM support via the following commits:
f5b08e95bc03 ahci: Add runtime PM support for the host controller
e05e05973f39 ahci: Add functions to manage runtime PM of AHCI ports
558571930e2d ahci: Convert driver to use modern PM hooks
4a2c2074f209 ahci: Cache host controller version
21641413456c scsi: Drop runtime PM usage count after host is added
254ab69f652d scsi: Set request queue runtime PM status back to active on resume
61c02cb167ed block: Add blk_set_runtime_active()
7bcfbac98f3c ahci: Store irq number in struct ahci_host_priv
a5a093b7f6e4 ahci: Move interrupt enablement code to a separate function
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Reverting two previous gpio commits to allow the application of proper
upstream ready patches to add this support:
08943f2bbd50 gpio-pca953x: add "drive" property
a517d5b72e76 gpio: pca953x: provide GPIO base based on _UID
c91063f44368 gpio-pca953x: add PCAL9535 interrupt support
58f3c9f0ac6d Revert "gpio-pca953x: add "drive" property"
7abbd5fec15d Revert "gpio: pca953x: provide GPIO base based on _UID"
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backports to support Broxton and Apollo lake:
96c0e80f4007 dmaengine: idma64: clear LLP_[SD]_EN bits in last descriptor
3b2dbd1cadbf dmaengine: idma64: use local variable to index descriptor
d61599f94946 dmaengine: idma64: convert idma64_hw_desc_fill() to return void
9c9f37533789 dmaengine: idma64: set maximum allowed segment size for DMA
9d55c9523aa5 dmaengine: idma64: drop IRQ enable / disable in handler
f80e3f3f87c5 dmaengine: idma64: use lo_hi_readq() / lo_hi_writeq()
216429c319aa dmaengine: idma64: make better performance on pause / resume
2f982603b358 dmaengine: idma64: this is not DesignWare
a7f7ee3a6a91 dmaengine: idma64: useless use of min_t()
3c8f2fcd2dfd dmaengine: idma64: convert to __ffs()
b452447dce9f dmaengine: idma64: improve residue estimation
849fdbe687a8 dmaengine: add a driver for Intel integrated DMA 64-bit
0038e6a4798e intel_punit_ipc: add NULL check for input parameters
4bd7fc987da6 platform:x86: Add Intel telemetry platform device
472c405dd66d intel_pmc_ipc: update acpi resource structure for Punit
e1754195568b MAINTAINERS: Combine multiple telemetry entries
14d8e14aca6d intel_telemetry_debugfs: Fix unused warnings in telemetry debugfs
8724677a6b60 platform:x86: Add Intel Telemetry Debugfs interfaces
d503a325c0ee platform:x86: Add Intel telemetry platform driver
255a8ac345e7 platform/x86: Add Intel Telemetry Core Driver
c475943802b5 platform:x86: add Intel P-Unit mailbox IPC driver
c2f1b2c7282c MAINTAINERS: Add maintainership for MIC drivers
7d389b483d32 surface pro 3: Add support driver for Surface Pro 3 buttons
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #5134]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #9344]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Show the actual command that failed when raising a CmdError. Makes
figuring out what actually failed much easier.
[YOCTO #9344]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
package_qa_check_libdir() reports that the file libsoletta.so.0.0.1-gdb.py
in /usr/share/gdb/auto-load is in the wrong location. Before generating
a warning for files in non-standard locations, check that the file is an
actual elf file (and hence a real library file).
[YOCTO #9215]
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use APPEND for grub's root device may cause confusion, for example, when
building efi + pcbios, there maybe be two root=/dev/ram0, one of them
would be carried to the installed target, and the target would fail to
boot. Use GRUB_ROOT to fix the problem, and remove SYSLINUX_ROOT from
APPEND will fix the problem.
[YOCTO #9354]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We never want checksum to vary depending on whether we calculate them
in server or worker context, that would make no sense. This was happening
in do_rootfs tasks since they reference the BB_WORKERCONTEXT variable.
Whitelist the variable to avoid this class of problem.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
PACKAGECONFIG doesn't work in cross-canadian recipes at the moment as
DEPENDS are prepended with mlprefix.
A recipe is either nativesdk, native or target so adjust the if
statements accordingly, use inherits_class for more accurate recipe
classification and add cross-canadian support.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This makes the code a bit shorter and more readable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The libassuan recipe is now buildable in distros which blacklist
GPL-3.0 without needing to be explicitly whitelisted (since it
provides at least one non GPLv3 package).
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- The main libassuan.so library is LGPLv2.1+
- Test apps (in tests sub directory) and documentation are GPLv3+
- Windows CE specific binaries (gpgcedev.dll and gpgcemgr) are GPLv3+
When building the current OE recipe, the test apps are compiled but
not installed. The Windows CE specific binaries are not compiled.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There might be more than one root=/dev/foo in the config file which
would cause unepected errros on the installed target, so remove all of
them.
[YOCTO #9354]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It mis-matched "SanDisk" or "Disk Flags" before, which caused unexpected
error.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #9374].
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The debugfs prefix is striped from t, but not from baset.
Therefore baset never matches t.
Signed-off-by: Freudiger Raphael <raphael.freudiger@siemens.com>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using PF to calculate the rpm filename doesn't work when PR server is
enabled and an extra PR value can be injected. Add code to use packagedata
to obtain the full name, allowing the test to work when PR server is
in use.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
So that the packagedata module can be used externally to the core OE
environment, add a missing import.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Reuse the 'license' variable, instead of calling
d.getVar('LICENSE', True) again.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
base.bbclass sets 'check_license' to False (and therefore skips
license checking completely) for native, nativesdk, etc recipes
(ie anything which could potentially be classed as "host tools"),
so supporting a dedicated whitelist of GPLv3 host tools is not
necessary.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The configure script was using the cross-compiler for feature tests,
which fails to execute when the target is different than the host.
Change the script to use the build compiler instead, but use the
target include files to check for the target features.
[YOCTO #9359]
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It has been done in syslinux.bbclass.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move the common code to live_vm_common.bbclass and remove duplicated ones.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
They are doing the same things: create live images, merge them into one
bbclass makes it easy to understand.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
They are doing the same things: create virtual machine images, merge
them into one bbclass makes it easy to understand.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed the build error when building man.config.5 (a remnant of a long
ago previous patch). Optimized the manpages Makefile for parallel
builds. Drop a FHS patch that is no longer needed, as the standard
Makefile puts the man pages in the proper location. Also, fix compile
warnings in a couple other files.
[YOCTO #9341]
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously the list of packages that are considered unneeded for a
read-only rootfs was hardcoded. This made it impossible to, e.g., have
shadow installed on a system with a read-only rootfs, but where /etc
is mounted writable.
This also lists ${VIRTUAL-RUNTIME_update-alternatives} rather than
update-alternatives (as was previously the case) since this should
actually remove the intended package.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
systemd-resolved build fails without gcrypt PACKAGECONFIG. Backport the fix.
Also remove the comment about resolved's dependence on gcrypt.
[YOCTO #9219]
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
all_proxy is referred to by oe-git-proxy so ensure it is allowed through
into the installer environment in case the extensible SDK install
process needs to query a remote git repository.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If SDK_EXT_TYPE is set to "minimal" then the SDK won't contain many
sstate artifacts, and you're required to set up an sstate mirror in this
case anyway so there's no point publishing the "stub" sstate-cache
directory from within the SDK since it won't be useful for update
purposes and may be confused with the real sstate-cache.
There is however a possibility that people might publish the real
sstate-cache directory under the same output directory provided to
oe-publish-sdk, thus deleting it after extracting (as we were doing with
other files we wanted to clean up at the end) would be problematic,
besides which extracting it and then deleting it is wasteful. Thus,
introduce a "-p" command line option to the SDK installer that we can
use to tell tar not to extract the items we don't want when publishing.
This has the added benefit of mostly keeping references to these in the
place they belong i.e. in populate_sdk_ext.bbclass.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When running bitbake you may pass in values of variables from the
external environment (making use of BB_ENV_EXTRAWHITE), and you may
choose to do this when building the extensible SDK, for example:
MACHINE=qemuarm bitbake -c populate_sdk_ext core-image-minimal
You would naturally expect those settings to be reflected in the
extensible SDK itself; however they were not, since we were only
considering local.conf and auto.conf. Check the variables mentioned in
BB_ENV_EXTRAWHITE to see if any are different than the values set in
local.conf/auto.conf and add lines setting them in the SDK's local.conf
if so.
Fixes [YOCTO #9339].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There appears to have been a lot of copy and pasting of the code
which prints tracebacks upon failure and limits the stack trace to
5 entries. This obscures the real error and is very confusing to the user
it look me an age to work out why some tracebacks weren't useful.
This patch removes the limit, making tracebacks much more useful for
debugging.
[YOCTO #9230]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
NPY_SIZEOF_OFF_T must be defined. Otherwise:
/home/ricardo/curro/qt5022/oe/openembedded-core/build/tmp-glibc/sysroots
/qemux86-64/usr/lib/python2.7/site-packages/numpy/core/include/numpy/
npy_common.h:140:9: warning: "NPY_SIZEOF_OFF_T" is not defined [-Wundef]
#if NPY_SIZEOF_OFF_T == NPY_SIZEOF_SHORT
^
/home/ricardo/curro/qt5022/oe/openembedded-core/build/tmp-glibc/sysroots/
qemux86-64/usr/lib/python2.7/site-packages/numpy/core/include/numpy
/npy_common.h:142:11: warning: "NPY_SIZEOF_OFF_T" is not defined [-Wundef]
#elif NPY_SIZEOF_OFF_T == NPY_SIZEOF_INT
^
/home/ricardo/curro/qt5022/oe/openembedded-core/build/tmp-glibc/sysroots/
qemux86-64/usr/lib/python2.7/site-packages/numpy/core/include/numpy/
npy_common.h:144:11: warning: "NPY_SIZEOF_OFF_T" is not defined [-Wundef]
#elif NPY_SIZEOF_OFF_T == NPY_SIZEOF_LONG
^
/home/ricardo/curro/qt5022/oe/openembedded-core/build/tmp-glibc/sysroots/
qemux86-64/usr/lib/python2.7/site-packages/numpy/core/include/numpy/
npy_common.h:146:11: warning: "NPY_SIZEOF_OFF_T" is not defined [-Wundef]
#elif NPY_SIZEOF_OFF_T == NPY_SIZEOF_LONGLONG
^
/home/ricardo/curro/qt5022/oe/openembedded-core/build/tmp-glibc/sysroots/
qemux86-64/usr/lib/python2.7/site-packages/numpy/core/include/numpy/
npy_common.h:149:10: error: #error Unsupported size for type off_t
#error Unsupported size for type off_t
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The mkisofs requires syslinux/isolinux.bin which is provided by
target syslinux, for pcbios, the depends is already there, but for
EFI, it isn't, so add the depends.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Yocto's ldconfig-native was exported from an old version of glibc and
generates an ld.so.cache that is partially ignored by current versions
of glibc when loading libraries. This occurs for 64-bit binaries, where
glibc expects FLAG_ELF_LIBC6, but ldconfig-native only generates the
standard ELF flag. Fix this with an additional patch on top of the patch
for now.
You can verify this by applying the patch below to your target copy of
glibc and running
LD_DEBUG=libs /lib64/ld-linux-x86-64.so.2 --list $anybinary
--- ./elf/dl-cache.c.orig 2016-01-07 11:05:36.823447171 +0100
+++ ./elf/dl-cache.c 2016-01-07 11:19:53.925878628 +0100
@@ -106,6 +106,8 @@
if (_dl_cache_check_flags (flags) \
&& _dl_cache_verify_ptr (lib->value)) \
{ \
+ if (__glibc_unlikely (GLRO_dl_debug_mask & DL_DEBUG_LIBS))\
+ _dl_debug_printf (" considering file %s\n", cache_data + lib->value); \
if (best == NULL || flags == GLRO(dl_correct_cache_id)) \
{ \
HWCAP_CHECK; \
@@ -117,6 +119,9 @@
searching. */ \
break; \
} \
+ } else { \
+ if (__glibc_unlikely (GLRO_dl_debug_mask & DL_DEBUG_LIBS)) \
+ _dl_debug_printf (" ignoring file %s due to flags %x, expected %x\n", cache_data + lib->value, lib->flags, GLRO(dl_correct_cache_id)); \
} \
} \
while (++middle <= right); \
@@ -265,14 +270,23 @@
/* Only accept hwcap if it's for the right platform. */
#define HWCAP_CHECK \
- if (lib->hwcap & hwcap_exclude) \
+ if (lib->hwcap & hwcap_exclude) { \
+ if (__glibc_unlikely (GLRO_dl_debug_mask & DL_DEBUG_LIBS)) \
+ _dl_debug_printf (" hwcap mismatch %x vs. %x\n", lib->hwcap, hwcap_exclude); \
continue; \
- if (GLRO(dl_osversion) && lib->osversion > GLRO(dl_osversion)) \
+ } \
+ if (GLRO(dl_osversion) && lib->osversion > GLRO(dl_osversion)) { \
+ if (__glibc_unlikely (GLRO_dl_debug_mask & DL_DEBUG_LIBS)) \
+ _dl_debug_printf (" os version mismatch %x vs. %x\n", lib->osversion, GLRO(dl_osversion)); \
continue; \
+ } \
if (_DL_PLATFORMS_COUNT \
&& (lib->hwcap & _DL_HWCAP_PLATFORM) != 0 \
- && (lib->hwcap & _DL_HWCAP_PLATFORM) != platform) \
- continue
+ && (lib->hwcap & _DL_HWCAP_PLATFORM) != platform) { \
+ if (__glibc_unlikely (GLRO_dl_debug_mask & DL_DEBUG_LIBS)) \
+ _dl_debug_printf (" platform mismatch %x vs. %x\n", lib->hwcap & _DL_HWCAP_PLATFORM, platform); \
+ continue; \
+ }
SEARCH_CACHE (cache_new);
}
else
This version of ldconfig-native should really be replaced with a version
matching the glibc source in use on the target platform.
Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using systemd as init rng-tools is causing a circular dependency
between units,
[ 7.706250] systemd[1]: basic.target: Found ordering cycle on
basic.target/start
[ 7.706934] systemd[1]: basic.target: Found dependency on
sysinit.target/start
[ 7.707795] systemd[1]: basic.target: Found dependency on
rng-tools.service/start
[ 7.708692] systemd[1]: basic.target: Found dependency on
basic.target/start
[ 7.709461] systemd[1]: basic.target: Breaking ordering cycle by
deleting job rng-tools.service/start
[ 7.710404] systemd[1]: rng-tools.service: Job rng-tools.service/start
deleted to break ordering cycle starting with basic.target/start
The problem is related to systemd running sysvinit scripts by default
add dependency of basic.target for sysvinit script so when sysvscript
is at rcS is added also as dependency of sysinit.target causing a
cirular dependency in this case: basic.target -> sysinit.target ->
rng-tools.service -> basic.target.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When systemd is enabled as init we need to notice when circular
dependencies in units happen because systemd try to solve this situation
removing the unit itself.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In case a getty is required on a UART which is not being
used as the kernel console, the current agetty invocation
fails to obey the baud rate configured through the
SERIAL_CONSOLES variable because it uses --keep-baud.
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We can replace __WORDSIZE with UINTPTR_MAX
sys/user.h is in conflict with asm/ptrace.h on musl
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1418 test_recipetool_create_cmake
1422 test_qemu
1423 test_devtool_add_git_local
1433 test_devtool_upgrade_git
1434 test_sanity_unsafe_binary_references
1435 test_read_only_image
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To let overlayfs be used like aufs, we create a feature
fragment. Configurations that want this union FS type, can
enable it via KERNEL_FEATURES.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
c43425f73287 mfd: lpss: Add PCI IDs for Intel Broxton B-Step platform
2d6cc1d3e71f spi: pxa2xx: Add support for Intel Broxton B-Step
1df3674b7626 usb: dwc3: gadget: don't send extra ZLP
222ab0043e48 usb: dwc3: gadget: handle request->zero
3f01b2c0295a usb: dwc3: gadget: simplify dwc3_gadget_ep_queue()
729b5a1f8f65 usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.
65740f5d1a0d usb: dwc3: gadget: simplify next_request() return check
a82442f90ea7 usb: dwc3: Fix assignment of EP transfer resources
d99293bbaa50 usb: dwc3: ep0: fix setup_packet_pending initialization
Signed-off-by: Matt Ranostay <matt.ranostay@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[
NUC6 (Skylake) graphics firmware fails to load without this patch.
From: Mat Martineau <mathew.j.martineau@linux.intel.com>
commit a41c8882592fb80458959b10e37632ce030b68ca upstream.
The driver does not load firmware for unknown steppings, so these new
steppings must be added to the list.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1454023163-25469-1-git-send-email-mathew.j.martineau@linux.intel.com
]
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Bruce Ashfield
Alexander Kanavin
Markus Lehtonen
Bill Randle
Robert Yang
Richard Purdie
Jonathan Liu
Ulf Magnusson
Andre McCurdy
Tudor Florea
Jussi Kukkonen
Freudiger Raphael
Peter Kjellerstedt
Maxin B. John
Paul Eggleton
Ricardo Ribalda Delgado
Clemens Lang
Aníbal Limón
Awais Belal
Khem Raj
Daniel Istrate