| Age | Commit message (Collapse) | Author |
|---|
|
Make the extrating faster by:
* Merge the two heavy "for .. find" loops into one
* Move the commands out of for loop rather than inside, this can reduce the
forking amount.
As a result, when install:
* buildtools-nativesdk-standalone: 14s -> 7s (50% saved)
* core-image-minimal-core2-64-toolchain: 56s -> 47s (17% saved)
[YOCTO #8404]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
If gdkpixbuf-native rebuilds and there are stale (broken) modules lying around,
it can fail to run the postinst. E.g. svg links to harfbuzz and if harfbuzz is
removed from the sysroot but the svg loader isn't, we get a symbol linking issue.
The reproducer is along the lines of build gdk-pixbuf-native along
with harfbuzz-native and librsvg-native, then make a small change to the
gdk-pixbuf recipe that would cause it to rebuild, clean harfbuzz-native
and then build gdk-pixbuf.
To fix this, when we install gdk-pixbuf, we wipe out any previous loaders.
The idea is that gdk would always come first and anything else installing
itself will come later and rerun the postinst if needed. We can therefore
just remove any other loaders.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Systemd's configuration files for creation, deletion and cleaning
of volatile and temporary files are installed in /usr/lib even when
multilib is in use (when /usr/lib64 is available). In this check the
systemd.conf file will not be found if libdir is /usr/lib64 so we fix the
path to match this file's installation path to look for it in
${exec_prefix}/lib
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Configure option --with-trust-paths is only used for test scripts
trust/test-extract which is not packaged by default. If the option is
not provided, it checks 4 files on build machine. If the files don't
exist, configure fails.
Add configure option '--without-trust-paths' to fix this issue.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed when sh is bash:
$ sh ./tmp/deploy/sdk/poky-glibc-x86_64-core-image-minimal-core2-64-toolchain-1.8+snapshot.sh
Poky (Yocto Project Reference Distro) SDK installer version 1.8+snapshot
===========================================================
./tmp/deploy/sdk/poky-glibc-x86_64-core-image-minimal-core2-64-toolchain-1.8+snapshot.sh: 77: read: Illegal option -e
You are about to install the SDK to "/opt/poky/1.8+snapshot". Proceed[Y/n]? ../SDK2
Installation aborted!
There is ony one bashism "read -e" in toolchain-shar-extract.sh, but
'-e' is useless here, so remove it and use /bin/sh.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
stamp-base was only ever used by the shared workdir code in gcc. This
turned out to be problematic and has been replaced by other approaches
which don't need specialist bitbake knowledge.
stamp-base will likely get removed from bitbake but for now, remove it
from archiver to simplfy the code since gcc no longer uses it.
This stops people getting confused by the obsolete code paths which I'm
getting a lot of questions about.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gcc-source is the only gcc recipe meant to handle the fetch/unpack/patch
tasks, the other gcc recipes then depend on this.
This approach has been creating some confusion for tools like the archiver.
The simplest way to signal to these processes that there is no source
is to empty SRC_URI at the same time we disable the other tasks.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When building libgcc some files and libraries may be built but not packaged.
The original code packaged only some explicitly specified files targeting mostly x86.
This patch does not discriminate between various targets.
It fixes errors such as these:
ERROR: QA Issue: libgcc: Files/directories were installed but not shipped in any package:
/usr/lib/arm-poky-eabi/4.9.3/thumb
/usr/lib/arm-poky-eabi/4.9.3/fpu
/usr/lib/arm-poky-eabi/4.9.3/thumb/libgcov.a
/usr/lib/arm-poky-eabi/4.9.3/thumb/crtn.o
/usr/lib/arm-poky-eabi/4.9.3/thumb/crtend.o
/usr/lib/arm-poky-eabi/4.9.3/thumb/crtbegin.o
/usr/lib/arm-poky-eabi/4.9.3/thumb/libgcc.a
/usr/lib/arm-poky-eabi/4.9.3/thumb/crti.o
/usr/lib/arm-poky-eabi/4.9.3/fpu/libgcov.a
/usr/lib/arm-poky-eabi/4.9.3/fpu/crtn.o
/usr/lib/arm-poky-eabi/4.9.3/fpu/crtend.o
/usr/lib/arm-poky-eabi/4.9.3/fpu/crtbegin.o
/usr/lib/arm-poky-eabi/4.9.3/fpu/libgcc.a
/usr/lib/arm-poky-eabi/4.9.3/fpu/crti.o
Please set FILES such that these items are packaged. Alternatively if they are unneeded,
avoid installing them or delete them within do_install. [installed-vs-shipped]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add '$' to fix a patch which adds pkgconfig support to libksba.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes systemd failing to start on Raspberry Pi 2 if it is compiled
with GCC 5.2.
It would try to start "Journal Service" and "udev Kernel Device Manager"
but fail repeatedly.
[YOCTO #8291]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit d347bd8b672fbd614a6267f640133cf399b9645f.
Accidentally merged v1 of this, revert so we can merge v2.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #6929] this test validates the feature introduced in bug 6929
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently if qemu fails when running a selftest and
tries to run some commands on the host it will fail
because some variables required by the Dumper class
do not exist because testimage was not included.
This change adds a default parent directory to save
the dumps for the host or target. Also adds default
commands to run if no commands were provided to the
class. With these changes the previous errors using
selftest don't show anymore.
[YOCTO #8306]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* original webkit-gtk_1.8.3.bb recipe already had this, I don't know
why it was removed when upgrading to 2.8.5
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't need DEPLOY_DIR for every runtime test so there is no
need for it to be mandatory.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order for the test export runner to work oetest needs to be
separated from bitbake environment. There is no need to use bb
import here so we can use a logger instead.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We presently don't package isl. Unfortunately, if the host is already
using gcc-5.2 (as is presently the case on Arch Linux), configure will
autodetect the host's libisl, and do_compile will break because the
system isl headers aren't pulled in. In lieu of packaging isl, disable
it for now.
[YOCTO #8376]
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Systemd is failing trying to load kdbus [1] because kmod have
an error in return code when try to insert module [2].
This change of SRCREV is a MINOR one only include the fix
described.
[YOCTO #8377]
[1] https://bugzilla.yoctoproject.org/show_bug.cgi?id=8377#c0
[2] http://lists.freedesktop.org/archives/systemd-devel/2015-July/033549.html
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sato uses busybox that fails to write log using echo "" because
dmesg output can contain special characters.
[YOCTO #8377]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make package_qa_clean_path() return something like "work/path/to/file"
rather than "/work/path/to/file", the relative path is a little clear.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* fix the path for "define %pkg-config-program" in guile-config
* clean the --sysroot in guile-snarf
* add RDEPENDS on pkgconfig
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gcc 5 defaults to C11 rules about "extern inline": this breaks
any code that includes gmp.h header from gmp 4.2.1 with 'multiple
definition' errors.
disable-stdc patch is no longer required because of this.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 0600 modes were coming from fopen/freopen/etc., because those
don't specify a filesystem mode (just an access mode like "r" or
"w"). Use 0666 & ~umask. (And then the PSEUDO_FS_MODE macro masks
in the 0600 bits we want to be sure are present.)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Starting logging thread message is also executed on run() inside
LoggingThread class.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
LoggingThread is used for receive console output from QEMU
over TCP, so add filter to only wake poll on read events,
also change the event mask variable name to be more descriptive.
This fixes HIGH CPU consume caused by wake on ready to write
events.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upon further reflection, it seems to me that this bbappend ought to just
be deleted at the end of the build. This keeps things simple; you never
have to remember to delete any files to get back to where you were
before with the image. This means we can also drop the slightly awkward
message reminding the user how to do that. I've also updated the test to
look at the image manifest to determine if the command has worked
instead of looking for the (now deleted) bbappend.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These functions ostensibly allowed parsing a recipe without bbappends
but this clearly hadn't been tested because a variable was unassigned in
both of them in that case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Unfortunately it appears that under certain circumstances, a failed
git am followed by git am --abort won't clean up any changes the patch
might have made - this was seen when running "devtool extract" on the
unzip recipe; unzip-6.0_overflow3.diff has a malformed date as far as
git am is concerned but it triggers this condition. Add a
git reset --hard HEAD followed by git clean -f in order to recover from
this scenario.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The value of the deps varflag for tasks is (unusually) expected to be a
list object rather than a space-separated string, hence we cannot use
appendVarFlag() here. This fixes a traceback when parsing the gcc recipe
with externalsrc enabled, for example.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It turns out that there are folks out there who use externalsrc in
normal builds and don't really need to be warned; additionally within
the extensible SDK or when using devtool, it shouldn't be a warning
situation. Thus, scale it back to a note (we can't use bb.note() here
since that wouldn't actually be piped through to the bitbake UI). Also
touch up the message a little bit.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Tar has supported a --checkpoint option since version 1.15.91, so it
should be safe to use here to print dots showing that it's still doing
something (technically it's not really progress unless you know how many
dots it's going to print, which even it doesn't know at the start, but
it's better than nothing).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is not actually used for anything - I thought that we would need to
use it within devtool to set global configuration, but we're able to do
everything we need within the bbappends it creates, which also saves on
parse time. If we're not going to use work-config.inc let's just drop it
completely.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Provide the ability to define a function containing extra configuration
values to be added to the local.conf file that goes into the SDK. For
example, this could be used to set up SSTATE_MIRRORS within the SDK.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
installer with sh
If you ran the extensible SDK installer file with sh (instead of bash),
then the additional call to buildtools environment setup, extension of
PATH to support running devtool, and setting of OE_SKIP_SDK_CHECK
weren't being added to the end of the script. This is because apparently
bash is happy to expand wildcards in the target of a redirection, but
bash running in POSIX sh mode won't (although it apparently does work on
the sh command line rather than within a script run as an argument to
sh). In any case using a wildcard here is a bit of a crutch which we
don't need, so replace it with the proper path to the environment setup
script.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Variables such as SRC_URI which are space-separated may also contain
Python expressions (${@...}) which themselves contain spaces that
shouldn't be split when splitting the value into items. In order to
ensure this we need to use a custom splitting function instead of just
string.split().
This issue could be seen when doing "devtool modify sudo", adding a
commit to the resulting source repository then "devtool update-recipe" -
the Python expression in SRC_URI was being unnecessarily broken onto
multiple lines.
Fixes [YOCTO #8046].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Setting the SRCREVs to import the following changes in the
4.1 kernel tree:
79a31b9d23db hid-core: Avoid uninitialized buffer access
121593d3a0a4 aufs: call mutex.owner only when DEBUG_MUTEXES or MUTEX_SPIN_ON_OWNER is defined
efa7952a190f Bluetooth: Delay check for conn->smp in smp_conn_security()
69428ec43bd9 cc2520: set the default fifo pin value from platform data
ee0ddf37f3d6 fs/yaffs2: Fix a judgement logic for ACL operations
fff29e47f5c4 yaffs2: remove read and write methods
b3b9d030ad84 yaffs2: replace f_dentry to f_path.dentry
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes b6e64de541b37 "Restore compatibility with previous UBI filesystems"
The multivolume UBI code creates symlinks for each volume. If the volume name
is empty, it will create a symlink that the rootfs code will attempt to
create again later, resulting in a crash like this (unless IMAGE_LINK_NAME
is blank):
ERROR: Error executing a python function in .../recipes-core/images/my-image.bb:
File: '.../oe-core/meta/lib/oe/image.py', lineno: 203, function: _create_symlinks
*** 0203: os.symlink(src, dst)
Exception: OSError: [Errno 17] File exists
To prevent this from happening, only create symlinks to volumes that have
a name, and let the rootfs script create the default symlink later.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Removed unused imports: unittest, logging, pexpect
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This fixes systemd failing to start on Raspberry Pi 2 if it is compiled
with GCC 5.2.
It would try to start "Journal Service" and "udev Kernel Device Manager"
but fail repeatedly.
[YOCTO #8291]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a patch which adds a configuration for the nios2 processor.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The FE_DIVBYZERO is missing on nios2 , add a small patch to pixman
which checks for the presence of FE_DIVBYZERO and disables the test
which depends on it.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add patch to fix excessive greediness of OS/2 check in libtool.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Make nios2 kernel depend on libgcc.
In arch/nios2/Makefile, it adds LIBGCC to libs-y:
LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
libs-y += $(LIBGCC)
In file Makefile in top directory, libs-y is assigned to to var
KBUILD_VMLINUX_MAIN. It uses script link-vmlinux.sh to link vmlinux.o,
and when execute function vmlinux_link() in link-vmlinux.sh,
KBUILD_VMLINUX_MAIN is passed to ${LD}.
If build without libgcc, the value of LIBGCC is just libgcc.a without
parent directory. linux-yocto fails to build:
| LD vmlinux.o
| nios2-poky-linux-ld.bfd: cannot find libgcc.a: No such file or directory
Add libgcc to nios2 kernel dependency.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add nios2 target to valid arch list definition.
Based on previous work by Walter Goossens <waltergoossens@home.nl>
at https://github.com/wgoossens/meta-nios2 .
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Walter Goossens <waltergoossens@home.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add nios2-linux info, pulled from OE-Classic [1] as of commit
fabd8e6d07d3cd0cc93c2a0fc804f8c8f316c649 .
[1] https://github.com/openembedded/openembedded.git
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add support information for the Altera NIOS-II soft processor.
Based on previous work by Walter Goossens <waltergoossens@home.nl>
at https://github.com/wgoossens/meta-nios2 .
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Walter Goossens <waltergoossens@home.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The logic is supposed to avoid following dependencies when we depend on
a target recipe which depends on a native recipe. The problem is, we were
marking the dep (the native recipe) as already processed when we avoided
traversal, meaning that even when that recipe would be pulled in via
a different dependency, we skipped it there too, and whether it was skipped
entirely depended on the non-deterministic dep processing order. If the first
one to be encountered was via the indirect target dep, it wouldn't end up in
configuredeps, otherwise it would.
As we want to avoid traversing that particular dependency relationship, not
*every* dependency on the native, we should continue, but not add it to done,
so it can be traversed from other avenues.
This fixes an intermittent bug in some of my non-GPLv3 builds, where one
dependency upon gettext-minimal-native was skipped, but others should not have
been, resulting in it being removed from configuredeps entirely, and no
gettext macros being available.
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
python3-debugger fails to be invoked to debug other scripts complaining about
not being able to import pkutil, this patch adds pkgutil as a dependency for python3-debugger
fixing the issue.
[YOCTO #8334]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
python3-debugger (pdb) needs importlib as a dependency, if not included
it produces an error when importing pdb, making pdb unusable, this patch
adds importlib dependency fixing the issue.
{YOCT0 #8333]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The libglu requires both opengl (depends on virtual/libgl) and x11
(needs libGL.so which is provided by mesa when x11 in DISTRO_FEATURES),
so let libsdl depends on libglu when both x11 and opengl in
DISTRO_FEATURES.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Robert Yang
Richard Purdie
Reinette Chatre
Kai Kang
Juro Bystricky
Trevor Woerner
Jonathan Liu
Ross Burton
Daniel Istrate
Mariano Lopez
Martin Jansa
Lucian Musat
Richard Tollerton
Aníbal Limón
Jackie Huang
Jussi Kukkonen
Peter Seebach
Paul Eggleton
Bruce Ashfield
Mike Looijmans
Marek Vasut
Christopher Larson
Alejandro Hernandez