| Age | Commit message (Collapse) | Author |
|---|
|
Recent patches were applied which removed a function which set the xx
variable. This means xx can be uninitalised and prerm functions can fail.
This adjusts the patch to ensure the xx value isn't used in such a way.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test works by excluding curl-dev which curl-staticdev depends upon.
When static libraries aren't disabled, this leads to an odd looking test
failure.
Simply exclude curl-staticdev as well in case its enabled to make sure
the test always works.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The freedesktop.org.xml data and the update-mime-database tool are both GPLv2 as
per COPYING, so change LICENSE to GPLv2.
test-mime-magic.c is LGPLv2+ but we don't install that so isn't relevant.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The following patches have made it to upstream:
* 0001-configure-Fix-default-value-of-without-numa-switch-i.patch
* 0001-configure-add-knob-to-control-numa-support.patch
* 0003-Add-knob-to-control-tirpc-support.patch
* 0010-replace-__BEGIN_DECLS-and-__END_DECLS.patch
* 0040-safe_macros-make-is_fuse-return-zero-if-fs_type-is-N.patch
These patches have been refreshed in order to apply cleanly
and without any fuzz:
* 0004-build-Add-option-to-select-libc-implementation.patch
* 0008-Check-if-__GLIBC_PREREQ-is-defined-before-using-it.patch
* 0021-Define-_GNU_SOURCE-for-MREMAP_MAYMOVE-definition.patch
* 0028-rt_sigaction.h-Use-sighandler_t-instead-of-__sighand.patch
* 0036-testcases-network-nfsv4-acl-acl1.c-Security-fix-on-s.patch
This next patch was added to the set of patches that make LTP
build with musl:
* 0040-read_all-Define-FNM_EXTMATCH-if-not-already-like-und.patch
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, we can't build meson into SDKs because we don't autogenerate
the required meson.cross file.
Enable this by using the post-relocate hooks and generating a
meson.cross file based on the SDK environment passed into the
post-relocate hook.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add patches to enable meson to handle being wrapped with a shell script. This
will enable us to do so for supporting the SDK, which requires us to setup env
vars and point to a meson.cross file inside the SDK.
These patches are all merged upstream, so we can drop them soon.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's useful for the post-relocate scripts to be able to see the SDK
environment, for example to see the values of CC, CXX etc. in order to
dynamically generate toolchain files.
To enable this, source the SDK environment script prior to calling the
relocate scripts.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if a post-relocate script fails, it fails silently. We should
be louder about this, as it likely indicates a broken SDK.
Print a message if a post-relocate script fails.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, we look only for scripts matching *.sh, which means we can't
write post-relocate scripts in other languages.
Expand this to allow any type of script.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A function is uses a mix of spaces and tabs. The rest of the file
uses tabs, so switch to tabs uniformly.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The origins of the patch date back to early 2005 (prior to the start
of git history in oe-core) to fix a hardcoded limit on the maximum
size of remote host keys:
http://familiar.handhelds.narkive.com/b1VGg2bI/problem-w-dropbear-ssh
The hardcoded limit was fixed upstream in dropbear 0.47:
https://github.com/mkj/dropbear/commit/736f370dce614b717193f45d084e9e009de723ce
The patch has therefore been obsolete since then. It went unnoticed
until now as the patch has continued to apply - it modifies a value
which is not used.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
DSA keys have been deprecated for some time:
https://www.gentoo.org/support/news-items/2015-08-13-openssh-weak-keys.html
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
this fixes a build issue with boost 1.67.0
[Yocto 12762]
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
this fixes a build issue with boost 1.66.0
[Yocto 12762]
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As I will be leaving Intel, this address will no longer be valid,
so swap it for my personal one for now.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As I will be leaving Intel, this address will no longer be valid,
so swap it for my personal one for now.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As I will be leaving Intel, this address will no longer be valid,
so swap it for my personal one for now.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Qemu now builds with libsdl2, so update the local.conf.sample to reflect this.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default we now build our own libSDL, so don't ship libsdl in the self-hosted group.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* sdl1 since qemu-2.12.0 depends on x11 in DISTRO_FEATURES, switch to sdl2
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* drop "fdt sdl" listed twice in PACKAGECONFIG
* keep all 3 disabled by default
* spice, usbredir recipes will eventually be in meta-networking layer
(you can use jansa/spice branch from meta-openembedded-contrib repository)
* virglrenderer recipe will eventually be in oe-core layer
(you can use jansa/qemu branch from openembedded-core-contrib repository)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* drop patches which are now included upstream
* revert "linux-user: fix mmap/munmap/mprotect/mremap/shma" which is
causing
0010-linux-user-Fix-webkitgtk-hangs-on-32-bit-x86-target.patch
to stop working and qemu-i386 hanging during gobject-introspection in
webkitgtk when building for qemux86 with musl
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, when dropbear was started via its init script, relocation
of DROPBEAR_RSAKEY_DIR to support read-only rootfs was handled at
run time from within the init script.
Update the init script to take advantage of the read-only rootfs
config setup by read_only_rootfs_hook() and therefore be consistent
with startup under systemd (where relocation of DROPBEAR_RSAKEY_DIR
is handled by the read_only_rootfs_hook() at build time).
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the maximum number of open file descriptors is much greater than the
usual 1024 (for example inside a Docker container), the performance
drops significantly.
This was reported upstream in:
https://bugzilla.redhat.com/show_bug.cgi?id=1537564
which resulted in:
https://github.com/rpm-software-management/rpm/pull/444
The pull request above has now been integrated and this commit contains
a backport of its three patches, which together change the behavior of
rpm so that its performance is now independent of the maximum number of
open file descriptors.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit 6f1822e5f1eaafd8bc46e999de730c1fcca77f3a.
This patch only solved a part of the problem.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- fix multiple lzma segmentation faults
- patch includes multiple fixing commits
- test-cases have been removed due to binary data
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since the addition of progress reporting, the wget fetcher will
over-ride -nv by unconditionally appending "--progress=dot -v" to the
final wget command line.
http://git.openembedded.org/bitbake/commit/?id=4027649f422ee64b1c4e1ad8d48ac295050afbff
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When running testimage task for core-image-sato-sdk, the following
error appeared.
UnicodeDecodeError: 'utf-8' codec can't decode byte 0x82 at position 0: invalid start byte
Checking the codes, I found it's caused by setting a 1024 limit for the
read method of the StreamReader object.
Comments from the manual:
"""
The chars argument indicates the number of decoded code points or bytes to
return. The read() method will never return more data than requested, but
it might return less, if there is not enough available.
"""
When running `systemctl status --full' on target, this error occurs.
This patch increase the bytes limit to 4096 to fix the error.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
testimage-auto is expected to run testimage task's codes automatically.
But in fact, it's currently missing some codes, including testimage_sanity
and create_rpm_index.
This leads to the problem of unexpected runtime failure of test_dnf_makecache.
The error message is as below.
RESULTS - dnf.DnfRepoTest.test_dnf_makecache - Testcase 1744: ERROR
This error is caused by the fact that create_rpm_index is not executed
before running the tests.
There's no reason why such codes should not be in testimage_main, so
move them into it.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A list of tools are added to HOSTTOOLS depending on if we inherit
testimage or not. Unfortunately, if we use TEST_IMAGE variable to
automate the test, these tools are not added to HOSTTOOLS.
Modify the condition to also check TEST_IMAGE to fix the above problem.
Also, change to use if...else... instead of list index for such setting.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test_file_connman should be executed only when 'lib32-connman' is
installed and 'connman' is not installed.
When lib32-connman and connman are both installed, the /usr/sbin/connmand
could be from connman or lib32-connman, depending on the installation
order. What we want to check is the connmand command from lib32-connman,
so we need to make sure that connman is not there to cause chaos.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1) The test cases use 'readelf' command to do the check. This command
is from binutils. So skip the test if the needed binutils package is
not installed.
The related error message in log.do_testimage is like below.
Output: sh: readelf: not found
2) The test case tests /lib/libc.so.6 from lib32-libc6. So skip the test
if lib32-libc6 is not installed.
The related error message in log.do_testimage is like below.
Output: readelf: Error: 'lib/libc.so.6': No such file
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This test case should only run when rpm package is installed.
So skip it if rpm package is not installed. This fixes:
RESULTS - rpm.RpmBasicTest.test_rpm_help - Testcase 1059: FAILED
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The var might not be set, resulting in unexpected error.
RESULTS - multilib.MultilibTest.test_check_multilib_libc - Testcase 1593: ERROR
The above error is due to MULTILIBS being not set, which is the default
for OE. This patch fixes this problem.
Also, the debugging message in skipIfNotInDataVar is currently confusing.
Instead of
DEBUG: Checking if 'MULTILIBS' value is in 'multilib:lib32' to run the test
it should be
DEBUG: Checking if 'MULTILIBS' value contains 'multilib:lib32' to run the test
This patch also fixes it.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Having 'auto' in TEST_SUITES will also run the 'dnf' test cases,
so also check it to determine whether to create rpm index or not.
This is to fix the following error when TEST_SUITES = "auto".
RESULTS - dnf.DnfRepoTest.test_dnf_makecache - Testcase 1744: ERROR
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use 'cls' instead of 'obj' to better reflect that registerDecorator
actually serves as a class decorator.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OETestFilter is a subclass of OETestDecorator. It wants to make
use of @abstractmethod decorator. But such decorator requires
metaclass to be ABCMeta to have effect. So add it now to achieve
the designed behaviour.
Comments from python's manual:
"""
Using this decorator requires that the class's metaclass is ABCMeta
or is derived from it.
"""
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current behaviour of TEST_SUITES is very confusing.
setting: TEST_SUITES = ""
result: Execute all test cases.
setting: TEST_SUITES = "some_case_not_exist"
result: Error out with 'Empty test suite' message.
The expected behaviour of TEST_SUITES should be:
1. when 'auto' is in it, execute as many test cases as possible
2. when no valid test case is specified, error out and give user message
The first one is implemented by a previous patch.
The second one is fixed in this patch.
Also add debug message to show test cases to be executed. This is
for easier debugging.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In previous OEQA, having 'auto' in TEST_SUITES results in executing
as many test cases as possible.
This behaviour is broken for now. From the codes in core/loader.py,
I can see that it tries to use another keyword 'all'. But in fact,
it does not work.
I've checked the current manual. The manual says using 'auto'.
Below is the current information in manual.
"""
Alternatively, you can provide the "auto" option to have all applicable
tests run against the image.
TEST_SUITES_append = " auto"
"""
So we should restore this behaviour. This patch does so.
Also, output warning message is some module is named as 'auto', as this
is a reserved keyword.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
../../xf86-input-mouse-1.9.2/src/mouse.c:824:5: error: implicit declaration of function 'xf86GetOS'; did you mean 'xf86SetDpi'? [-Werror=implicit-function-declaration]
| xf86GetOS(&osname, NULL, NULL, NULL);
| ^~~~~~~~~
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, $HOME/.local is being added into sys.path in the Python SDK
causing subtle host contamination. Suppress this by exporting
PYTHONNOUSERSITE = "1" as documented in PEP 370.
This issue occurred in the past for python*-native and was fixed
similarly in OE-core commit 8fe9fb4d5a61dcbcb3fc5b9ee0234cc135af873f
("python*native.bbclass: suppress user site dirs").
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The native override is specified in two different places, so let's move
it into a function to reduce code duplication.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When runqemu is invoked with an image type (wic, hddimg etc) as a parameter,
the kernel value and command line parameters from qemuboot.conf
are ignored and not passed to qemu cmdline.
As an example, when using:
$ runqemu wic kvm
It results in no network interface and video mode warnings when qemu is up because
the -kernel and -append options were not passed.
Change qemu conf to use qemux86-directdisk.wks that supplies the kernel parameters
that are appended to the bootloader configuration when generating qemu wic
images instead of relying on qemuboot.conf.
Fixes [YOCTO #12224]
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We ship the open posix test suite already but it isn't compiled.
Let's build it and make it ready to use on the device.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, ASNEEDED was appended to TARGET_LDFLAGS from
as-needed.inc via tcmode-default.inc and so may not have been enabled
for external toolchain builds or other configurations which over-ride
TCMODE (ie builds which do not include tcmode-default.inc).
Include ASNEEDED in TARGET_LDFLAGS directly from bitbake.conf to
ensure that the optimisation is applied to all builds (and for
consistency with the way that TARGET_LINK_HASH_STYLE is handled).
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The commented out value for TARGET_LDFLAGS dates back to the switch
to sysroot enabled toolchains in 2007 and is now obsolete.
http://git.openembedded.org/openembedded-core/commit/?id=ba2e1f4d933c37b372d6749d64614f2510ee9d7b
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The over-ride has been merged into the openobex recipe in meta-oe:
http://git.openembedded.org/meta-openembedded/commit/?id=e59a9738c24ccaeac91740d1f67c607d4ee2a217
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move the recipe specific over-ride for ASNEEDED into the recipe to
make it more apparent that the over-ride is being applied (and that
it should be re-checked on version updates, etc).
Re-apply change, which was previously merged and then reverted to
avoid conflicts with a distcc version update.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Ross Burton
Daniel Díaz
Martin Kelly
Andre McCurdy
Armin Kuster
Alexander Kanavin
Martin Jansa
Peter Kjellerstedt
Andrej Valek
Chen Qi
Anuj Mittal
Fathi Boudra