| Age | Commit message (Collapse) | Author |
|---|
|
do_split_package() constructs a list of packages that were created as it
iterates through the files, so if multiple files go into the same package then
the package will be repeated in the output.
Solve this by using a set() to store the created packages so that duplicates are
ignored.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Commit e69525: "kernel: Build uImage only when really
needed" hardcoded target kernel image to zImage for
case if uImage is generated by OpenEmbedded buildsystem.
However not all kernel architectures support zImage
target, for example AArch64 doesn't, so building of
kernel is failing on this step.
So instead of building zImage target that may not
exist for many architectures, build vmlinux target
that exists for all architectures.
Since kernel-uboot.bbclass uses vmlinux anyway for
creating image, there is no side effect on this change.
Signed-off-by: Ruslan Bilovol <rbilovol@cisco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixes: e5f41c221356 ("task-core-tools-profile: fix valgrind for arm and
systemtap for mips")
Valgrind works on ARMv7a and above.
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this the target gcc might not be in the sysroot
leading to configure failure.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When bootstrap calls autoreconf, it won't have AC_LOCAL set properly
so shared scripts may not be found: glib-2.0.m4 in this case.
Remove custom bootstrap code so autotools class handles this.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
busybox <= 1.24.2
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
busybox <= 1.24.2
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
opehssh <= 7.2
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
same fix for both CVE's
tiff <= 4.0.6
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Configure autodetects libtomcrypt, but then it adds libtommath to
$LIBS and fails to link subsequent tests if it's unavailable.
| checking for pcre.h... yes
| checking for pcre_compile in -lpcre... no
| checking whether to build with PCRE library... no
| ++ executing failure action
| configure: error: unable to find usable PCRE library
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is required for dbus-binding-tool.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is required for dbus-binding-tool.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This was resulting in non-deterministic builds where g-ir-doc-tool may or may
not exist depending on whether python-mako was built previously. Add
a PACKAGECONFIG so the dependency is explicit.
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Sujith Haridasan <Sujith_Haridasan@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is not enabled by default, as there are still limitations and possible
issues with opkg (and rpm?) packaging data containing broken symlinks for
local indexes:
http://cgit.openembedded.org/openembedded-core/commit/?id=c8e0ec2da9ad4ce1c103966906a85f68c15400dd
There are other use cases for the packaging data to be available in SDK,
since it provides comprehensive info about SDK's contents and in the case of
opkg and dpkg is all text-based and can be easily parsed by simple scripts.
Introduce new "package-management" flag for SDKIMAGE_FEATURES list (similar
to the one already used for IMAGE_FEATURES) that controls presence of the
packaging data in resulting SDK, while unifying this behavior across the
board for supported pkg managers - rpm, opkg, dpkg.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When enabling extra DEBUGFS image generation with opkg, errors are seen like:
ERROR: core-image-minimal-1.0-r0 do_rootfs: Cannot get the installed packages list. Command '/media/build1/poky/build/tmp/sysroots/x86_64-linux/usr/bin/opkg -f /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/opkg.conf -o /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs --force_postinstall --prefer-arch-to-version status' returned 0 and stderr:
Collected errors:
* file_md5sum_alloc: Failed to open file /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/etc/syslog-startup.conf.busybox: No such file or directory.
* file_md5sum_alloc: Failed to open file /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/etc/fstab: No such file or directory.
basically for all CONFFILES in the image. This is due to the file rearranging
the rootfs generation code does. If we preserve the /etc directory,
the avoids the problem.
We need to tell copyfile to preserve symlinks since some are present in /etc.
[YOCTO #9490]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of adding a custom task (do_boostconfig) simply use the existing
do_configure.
Ensure that there are no relative paths in do_configure.
Instead of editing the user-config.jam sample file in the source tree (which is
entirely comments) and extending it on every build, create a new user-config.jam
in ${WORKDIR}.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If there is an existing build directory when do enter do_compile() then delete
it, as it contains the previous build. If the rebuild was caused because
dependencies have changed we want to ensure that a rebuild actually happens.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Previously, write_deploy_manifest() was relying on
write_package_manifest() to create the subdirectory for the manifest
file. However, do_rootfs may be an empty function so that
write_package_manifest() will not be called and the manifest
subdirectory will not be created, causing a build failure. This patch
fixes that by creating the directory hierarchy inside
write_deploy_manifest().
[YOCTO #9446]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In "util-linux" implementation of flock, -c 'PROG ARGS' means run
"sh -c 'PROG ARGS'". At present, busybox implementation doesn't follow it.
That causes errors like the one listed below:
smart install /media/cronie-1.5.0-r0.core2_64.rpm
Updating cache...
<snip>
Output from cronie-1.5.0-r0@core2_64:
Running groupadd commands...
NOTE: cronie: Performing groupadd with [ --system crontab]
ERROR: cronie: groupadd command did not succeed.
error: %pre(cronie-1.5.0-r0.core2_64) scriptlet failed, exit status 1
error: install: %pre scriptlet failed (2), skipping
cronie-1.5.0-r0.core2_64
This is because we use flock command in preinstall scripts in packages
which create new groups/users.
[YOCTO #9496]
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Attempting to install ptest for valgrind fails with this error:
error: Can't install valgrind-ptest-3.11.0-r0.1@ppce500mc: no package
provides /this/is/a/bogus/interpreter/name
This is because one of the tests contains a bogus interpreter path on purpose
It is not enough to skip the QA warning about the missing dependency
but the dependency have to be completely removed.
Since this package contains oly tests it is safe to disable per file
dependencies and rely on the ones per package.
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Changes affecting future time stamps
America/Caracas switches from -0430 to -04 on 2016-05-01 at 02:30.
(Thanks to Alexander Krivenyshev for the heads-up.)
Asia/Magadan switches from +10 to +11 on 2016-04-24 at 02:00.
(Thanks to Alexander Krivenyshev and Matt Johnson.)
New zone Asia/Tomsk, split off from Asia/Novosibirsk. It covers
Tomsk Oblast, Russia, which switches from +06 to +07 on 2016-05-29
at 02:00. (Thanks to Stepan Golosunov.)
Changes affecting past time stamps
New zone Europe/Kirov, split off from Europe/Volgograd. It covers
Kirov Oblast, Russia, which switched from +04/+05 to +03/+04 on
1989-03-26 at 02:00, roughly a year after Europe/Volgograd made
the same change. (Thanks to Stepan Golosunov.)
Russia and nearby locations had daylight-saving transitions on
1992-03-29 at 02:00 and 1992-09-27 at 03:00, instead of on
1992-03-28 at 23:00 and 1992-09-26 at 23:00. (Thanks to Stepan
Golosunov.)
Many corrections to historical time in Kazakhstan from 1991
through 2005. (Thanks to Stepan Golosunov.) Replace Kazakhstan's
invented time zone abbreviations with numeric abbreviations.
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
they keep the versions in-sync. changes are all in data.
Changes affecting future time stamps
America/Caracas switches from -0430 to -04 on 2016-05-01 at 02:30.
(Thanks to Alexander Krivenyshev for the heads-up.)
Asia/Magadan switches from +10 to +11 on 2016-04-24 at 02:00.
(Thanks to Alexander Krivenyshev and Matt Johnson.)
New zone Asia/Tomsk, split off from Asia/Novosibirsk. It covers
Tomsk Oblast, Russia, which switches from +06 to +07 on 2016-05-29
at 02:00. (Thanks to Stepan Golosunov.)
Changes affecting past time stamps
New zone Europe/Kirov, split off from Europe/Volgograd. It covers
Kirov Oblast, Russia, which switched from +04/+05 to +03/+04 on
1989-03-26 at 02:00, roughly a year after Europe/Volgograd made
the same change. (Thanks to Stepan Golosunov.)
Russia and nearby locations had daylight-saving transitions on
1992-03-29 at 02:00 and 1992-09-27 at 03:00, instead of on
1992-03-28 at 23:00 and 1992-09-26 at 23:00. (Thanks to Stepan
Golosunov.)
Many corrections to historical time in Kazakhstan from 1991
through 2005. (Thanks to Stepan Golosunov.) Replace Kazakhstan's
invented time zone abbreviations with numeric abbreviations.
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Recipes that use intltool need to depend on intltool-native.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixes configure failure "intltoolize: command not found".
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The value of APPEND is already being tracked and does impact on the
generated configuration file. This reverts the OE-Core:3c2d7ae5 commit
as it is not need anymore.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #9487]
The debug filesystem file name is ending in "debug_tar", it should be simply
"tar". Strip the "debug_" piece as necessary.
To avoid deleting the tar ball, when we've asked for just the tarball we need
to check 't' and not 'realt'.
The two hunks were suggested by RP. I've implemented and verify they work
with the settings:
PACKAGE_CLASSES = "package_rpm"
IMAGE_GEN_DEBUGFS = '1'
IMAGE_FSTYPES_DEBUGFS = "tar.bz2"
IMAGE_FSTYPES_DEBUGFS = "tar.gz"
and
IMAGE_FSTYPES_DEBUGFS = "tar"
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you configure a bz2 debugfs, pbzip2-native currently isn't built.
This patch makes sure the dependencies are added.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The python code expects AUTO_SYSLINUXMENU to be a boolean value,
otherwise the logic fails. This fixes the code comparing the value to
"1" which is the value expected by the shell script code, counterpart.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of passing DESTDIR just in the make install invocation, pass it in
EXTRA_OEMAKE. This appears to stop perf from rebuilding at instal time for me,
which appears to be the trigger for the random build failure.
[ YOCTO #9182 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The recipe doesn't need any default deps.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixe when build with armv7a:
gcc -c ../../git/src/sw-exa.c -fPIC -DPIC -o .libs/sw-exa.o
{standard input}: Assembler messages:
{standard input}:179: Error: selected processor does not support `vld1.u8 {d0},[r1]!' in ARM mode
{standard input}:182: Error: selected processor does not support `vld1.u8 {d1},[r4]!' in ARM mode
{standard input}:183: Error: selected processor does not support `vld1.u8 {q1},[r0]!' in ARM mode
{standard input}:184: Error: selected processor does not support `vzip.u8 d0,d1' in ARM mode
{standard input}:185: Error: selected processor does not support `vld1.u8 {q2},[ip]!' in ARM mode
{standard input}:186: Error: selected processor does not support `vst2.u8 {q0,q1},[fp]!' in ARM mode
{standard input}:187: Error: selected FPU does not support instruction -- `vmov.u8 q1,q2'
{standard input}:188: Error: selected processor does not support `vst2.u8 {q0,q1},[lr]!' in ARM mode
{standard input}:239: Error: selected processor does not support `vld1.u8 {d0},[r1]!' in ARM mode
{standard input}:242: Error: selected processor does not support `vld1.u8 {d1},[r4]!' in ARM mode
{standard input}:243: Error: selected processor does not support `vld1.u8 {q1},[r0]!' in ARM mode
{standard input}:244: Error: selected processor does not support `vzip.u8 d0,d1' in ARM mode
{standard input}:245: Error: selected processor does not support `vld1.u8 {q2},[ip]!' in ARM mode
{standard input}:246: Error: selected processor does not support `vst2.u8 {q0,q1},[fp]!' in ARM mode
{standard input}:247: Error: selected FPU does not support instruction -- `vmov.u8 q1,q2'
{standard input}:248: Error: selected processor does not support `vst2.u8 {q0,q1},[lr]!' in ARM mode
make[2]: *** [image-format-conversions.lo] Error 1
make[2]: *** Waiting for unfinished jobs....
../../git/src/omapfb-crtc.c: In function 'OMAPFBCrtcResize':
../../git/src/omapfb-crtc.c:34:12: warning: unused variable 'ofb' [-Wunused-variable]
OMAPFBPtr ofb = OMAPFB(pScrn);
^
../../git/src/omapfb-xv.c:66:43: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
{ XvSettable | XvGettable, 0, 0xffff, "XV_COLORKEY" },
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* add separate variable for configuration options generated from
PACKAGECONFIG setting, this helps other bbclasses and recipes
to take advantage of PACKAGECONFIG mechanism, without including
other options from EXTRA_OECONF
* e.g. meta-qt5 recipes are abusing EXTRA_OECONF to get options
from PACKAGECONFIG:
EXTRA_QMAKEVARS_PRE +=
but with
conf/distro/include/no-static-libs.inc
it means getting --disable-static as invalid option inside
EXTRA_QMAKEVARS_PRE as reported by Alexandre Belloni who tried
to use poky with meta-qt5.
* once we migrate all bbclasses and recipes to PACKAGECONFIG_CONFARGS
we should also restrict EXTRA_OECONF append only to autotools.bbclass
like I did for cmake.bbclass
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This should also fix recent CVEs:
https://ma.ttias.be/remote-code-execution-git-versions-client-server-2-7-1-cve-2016-2324-cve-2016-2315/
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Call write_deploy_manifest() in image postprocessing phase, instead of
rootfs postprocessing. The reason being that not necessarily all
do_deploy tasks are dependencies of the do_rootfs and we might miss
something.
[YOCTO #9446]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update the OpenEmbedded Toaster configuration file to include the
krogoth branch. Also, make sure the DISTRO default value is set to
"nodistro".
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It looks like the master branch will no longer build with the Fido
release, so remove all references to fido and make sure that the file
sets up local, master and jethro releases.
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
"mktemp -t" is deprecated and does not work when using Toybox. Replace
with something that works also with Toybox.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Added output of test runner to bitbake console output.
bitbake <image> -c testimage now reports test progress
to the console:
NOTE: Executing RunQueue Tasks
...
NOTE: recipe core-image-lsb-1.0-r0: task do_testimage: Started
core-image-lsb-1.0-r0 do_testimage: test_ping (oeqa.runtime.ping.PingTest) ... ok
core-image-lsb-1.0-r0 do_testimage: test_ssh (oeqa.runtime.ssh.SshTest) ... ok
...
----------------------------------------------------------------------
core-image-lsb-1.0-r0 do_testimage: Ran 38 tests in 785.100s
core-image-lsb-1.0-r0 do_testimage:
core-image-lsb-1.0-r0 do_testimage: OK (skipped=1)
Adding more output to the console should also prevent autobuilder to kill
long running tests as ab assumes that test is stuck if no console output
produced by it for a long time.
[YOCTO #8238]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
ISC DHCP 4.1.x before 4.1-ESV-R13 and 4.2.x and 4.3.x before
4.3.4 does not restrict the number of concurrent TCP sessions,
which allows remote attackers to cause a denial of service
(INSIST assertion failure or request-processing outage)
by establishing many sessions.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-2774
Signed-off-by: Catalin Enache <catalin.enache@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Due to some logic within opkg, a package with the name matching a
dependency will always win over a package with that name in RPROVIDES -
even if there is an RCONFLICTS (which is silently ignored), higher feed
priority and version. The end result is that buildtools gets perl
installed instead of the nativesdk-buildtools-perl-dummy package and
that perl (with missing dependencies) gets used in preference to the
host one, which is precisely what we were trying to avoid.
This is almost certainly a bug in opkg, especially as the other
package's dependencies aren't properly installed under these
circumstances either. However, specifying RREPLACES works around this,
and with no apparent side-effects is probably the safest solution for
now.
At the same time I noticed that in prepending to SDK_PACKAGE_ARCHS we
were actually ending up with a low priority for the dummy package feed
rather than a high one, so change to append it instead. This has no
effect on the packages that get installed at the moment, but should be
done in case the package manager behaviour changes to factor in the feed
priority in future.
Fixes [YOCTO #9469].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixed:
run.create_sdk_files.45747: 131: [: =: unexpected operator
The SDKMACHINE is not set by default.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch addresses the issue of not being able to execute "runqemu"
in the Build Appliance.
The root cause of the problem was that TAP/TUN was not available,
although required by "runqemu". In addition, the recommended remedy
$ sudo modprobe tun
would fail for two reasons: modprobe not in PATH (user builder),
and "iptables" located in /usr/sbin but expected in /sbin.
[YOCTO #9437]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Ross Burton
Ruslan Bilovol
Felipe F. Tonello
Robert Yang
Jussi Kukkonen
Richard Purdie
Armin Kuster
Andreas Oberritter
Christopher Larson
Denys Dmytriyenko
Markus Lehtonen
Maxin B. John
Tudor Florea
Otavio Salvador
Mark Hatle
Martin Jansa
Alexander Kanavin
Belen Barros Pena
Belen Barros Pena
Patrick Ohly
Ed Bartosh
Catalin Enache
Paul Eggleton
Peter Kjellerstedt
Juro Bystricky