| Age | Commit message (Collapse) | Author |
|---|
|
When a non-existing MACHINE is specified, sanity check issues
the following message:
Please set a valid MACHINE in your local.conf or environment
However, MACHINE can also be set in multiconfig .conf file(s).
Hence we may have several different MACHINE settings within one
(multiconfig) build, so the present error message is fairly
ambiguous.
This patch remedies this by explicitly naming the offending MACHINE and
by amending the list of places where this erroneous MACHINE definition
could have originated.
MACHINE=xyz is invalid. Please set a valid MACHINE in your local.conf, environment or other configuration file.
[YOCTO#10810]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Presently there is no check to verify the existence of configuration
files as listed in BBMULTICONFIG.
For example, BBMULTICONFIG = "foobar" in local.conf does not trigger
an error or even a warning when there is no conf/multiconfig/foobar.conf.
The missing file is silently ignored.
This patch changes the inclusion of all multiconfig configuration files as
a non-optional requirement. If the file is missing, we get an error such as:
ERROR: ParseError at /data/master-multi/poky/meta/conf/bitbake.conf:704: Could not include required file conf/multiconfig/foobar.conf
Although the "default" configuration is not listed in BBMULTICONFIG,
this change also requires the file multiconfig/default.conf to exist.
The "default" (non-multiconfig) configuration is normally configured via local.conf,
so although this file is required, it can/should be empty. This patch creates
an empty file default.conf in meta/conf/multiconfig.
[YOCTO#10917]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch makes sure the directory which will contain
the systemd configuration (loader.conf) is created before
the configuration file is written, fixing errors when it
tried to write it to a non-existent directory
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
While both result in the same in this case, postrm
should really be referring to $D as we do everywhere
else.
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When removing unneeded packages from a (read-only) rootfs
during rootfs creation, alternative symlinks from those
packages may or may not be removed.
The reason is as follows:
update-alternatives(-native) is used during package
installation as part of the image creation. It uses
a database which contains entries for all the
alternative symlinks possible, and the -native version
uses the target's database by means of $OPKG_OFFLINE_ROOT,
i.e. the rootfs we're in the process of creating.
Once the rootfs has been created, OE removes certain
packages because we have a read-only rootfs - in
particular ROOTFS_RO_UNNEEDED which includes
VIRTUAL-RUNTIME_update-alternatives, i.e. the
update-alternatives. Recently, a change was made in
OE, where uninstallation of update-alternatives from the
rootfs causes removal of its database, too, to save space
(700KiB (uncompressed) in a busybox system)
b24a63d71b517af701dfedbc7f7b541d25af708f
http://git.openembedded.org/openembedded-core/commit/meta/recipes-devtools/opkg-utils/opkg-utils_git.bb?id=b24a63d71b517af701dfedbc7f7b541d25af708f
Following from that, if update-alternatives is removed
from the target file system, update-alternatives-native
has no database anymore, meaning it can't manage any of
the alternative symlinks anymore.
Because the order of packages to uninstall is
non-deterministic, and update-alternatives could well
be removed before any packages that use the mechanism
provided, sometimes the extra symlinks are removed,
sometimes not.
By sorting the list of packages to be removed such that
update-alternatives is removed last, we can ensure that
that tings work reliably. (Certainly opkg seems to
uninstall packages in the order given on the command
line.)
[YOCTO #10916]
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
poky-tiny cannot build full-cmdline image, so skip this test in this case.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The recipes being replaced are not compatible with all distros, so
use mraa and virtual/make for some checks.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fetching the DISTRO variable in the base constructor means that we have to start
bitbake for every test case instance, which adds minutes to the startup time.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It it is hard to select exactly the right lines from a file, in
particular because the documentation did not specify the exact
semantic (YOCTO #10898).
When the QA license check fails, it now includes the license text for
which the md5sum was calculated. When adding a new entry to
LIC_FILES_CHKSUM, developers can then verify that they picked the
desired lines. When the checksum of an older entry changes, the developer
does not have to manually look up the changed text.
Here's an example which probably has an endline which is too large
(message triggered by changing the md5sum in the recipe):
ERROR: cmake-native-3.7.1-r0 do_populate_lic: QA Issue: cmake-native: The LIC_FILES_CHKSUM does not match for file://Source/cmake.h;beginline=1;endline=3;md5=deadbeef
cmake-native: The new md5 checksum is 4494dee184212fc89c469c3acd555a14
cmake-native: Here is the selected license text:
vvvvvvvvvvvvvvvvvvvvvvvvvvvv beginline=1 vvvvvvvvvvvvvvvvvvvvvvvvvvvvv
/* Distributed under the OSI-approved BSD 3-Clause License. See accompanying
file Copyright.txt or https://cmake.org/licensing for details. */
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ endline=3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
cmake-native: Check if the license information has changed in .../cmake.h (lines 1 through to 3) to verify that the LICENSE value "BSD" remains valid [license-checksum]
The beginline/endline values are only repeated in the borders if set.
License snippets larger larger than 20 lines (configurable with
QA_MAX_LICENSE_LINES) are truncated in the middle.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These are already inherited by grub2.inc.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This test only exercises the include/exclude behaviour so it only needs to build
the two recipes that it tests against, not an entire image.
Part of #10874.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Reorder lines, no functional changes.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The etnaviv project is a free and open source linux driver for Vivante
2D/3D GPUs in i.MX SoCs.
Support for etnaviv in libdrm was added in 2.4.71.
Signed-off-by: Christoph Settgast <christoph.settgast@methodpark.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Have onboard (onscreen-keyboard) in the pipe for meta-oe. For that working
properly we need python3-pygobject build with cairo support.
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
3.15.2 -> 3.16.2
1. Updated the SRC_URI for releases in 2017
2. Removed the following revert patch as the fix is present in this release:
a) 0001-revert-ad601c7962-that-brings-2-increase-of-build-ti.patch
[YOCTO #10695]
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix path assumption for DEPLOY_DIR_SRC, otherwise, the testcase may fail
even if the functionality works well.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix path assumption for LICENSE_DIRECTORY, otherwise, the test case
may fail even if the functionality it tests works well.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Upgrade iproute2 from 4.7 to 4.9
Signed-off-by: Zheng Ruoqin <zhengrq.fnst@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The /etc and /usr/lib/ssl directories were only put into the opkg-generated
debugfs because of a bug in opkg which means that a conffile has to exist if
we're running 'opkg status'. This is now fixed, so the workaround can be
reverted.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If a conffile has been deleted (common when building a debugfs) the status
command will throw errors instead of handling that situation. Stop the code
being executed in the first place if it wasn't asked for, and handle errors
gracefully.
[ YOCTO #10761 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Apt can run multiple tasks daily, such as for example clean, update,
autoclean, unattended-upgrades etc.
[YOCTO #10669]
Signed-off-by: Linus Wallgren <linus.wallgren@scypho.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Test both for S == B and S != B.
Signed-off-by: Ola x Nilsson <olani@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The buildclean task should call the package build system clean
command, just implemented for Make for now.
This is meant for recipes where S == B, but can be useful as a
standalone task for other recipes too.
When S == B, set it to run before do_clean which will do what most
developers expect when calling bitbake -c clean. For S != B, do not
add it before clean as it is not needed and may take some time.
Signed-off-by: Ola x Nilsson <olani@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix the error below when SSTATE_DIR is not "${BUILDDIR}/sstate-cache".
FileNotFoundError: [Errno 2] No such file or directory: '/xxx/../sstate-cache'
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Install firmware files under ${base_libdir}/firmware instead of hardcoded
/lib/firmare.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use ${base_libdir}/modules inplace of /lib/modules for kernel modules installation path.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Delete logrotate dir to avoid errors
when test are executed more than 1
time on the same target.
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If LPAE is enabled, 3 level page table is used and the 'SECTION_SIZE'
is (1<<21), so add_buffer_phys_virt() should align to (1 << 21).
Signed-off-by: Haiqing Bai <Haiqing.Bai@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The /etc passwd files in a rootfs consist of the default entries from
base-passwd plus anything that gets added via package installation,
EXTRA_USERS_PARAMS and/or system sysusers.
The execution order of preinst scripts is not perfectly deterministic,
or at least unrelated changes caused it to change in a
non-deterministic way, resulting in irrelevant changes in the order of
passwd entries.
useradd-staticids.bbclass ensures that the numeric IDs don't change,
but re-ordering can still occur, which is bad for reproducible builds
and file-based update mechanisms like swupd which work best if changes
are as minimal as possible.
To achieve that, the files get sorted in a post-processing command,
enabled by default. Sorting is based primarily on the numeric IDs, so
for example, the "root" user continues to be listed first. "nobody"
now is at the end, which wasn't the case before.
The order of the entries should not matter, but in obscure cases where
it does (like having multiple entries for the same numeric ID) this
behavior can be disabled by setting SORT_PASSWD_POSTPROCESS_COMMAND to
an empty string.
Fixes: YOCTO #10520
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Adding http module from Python's standard library. This allow use
of the http module without installing all python-misc modules.
Signed-off-by: Derek Straka <derek@asterius.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Patches dropped as they are merged upstream:
- CVE-2016-6354.patch
- 0002-avoid-c-comments-in-c-code-fails-with-gcc-6.patch
- do_not_create_pdf_doc.patch
Apply a patch from github to simplify cross-compilation and not need a
flex-native to bootstrap.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
|
|
It was noticed that syslogd and klogd were no longer running on system
startup, meaning no /var/log/messages etc.. It appears as though
sysklogd has never been updated to follow the expected logging
requirement for systemd as described here:
https://www.freedesktop.org/wiki/Software/systemd/syslog/
As such no service was started and no logging present. Using the above
guidelines we create two new service files syslogd.service and
klogd.service. We make use of tmpfiles.d in order to ensure the
xconsole device node exists and do other minor recipe cleanup to
ensure peaceful coexistence with sysvinit and systemd implementations.
The systemd documentation also asks that for a logger which is not
rsyslog that we also enable 'ForwardToSyslog=' in journald.conf, but
this is already the case so no action is required.
With this change in place syslogd and klogd are started at system
startup and the expected logs are available.
Unfortunately I was not able to find any work done on this upstream or
in other distros so this is my best effort at making this work.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The upstream project remove that option as it was quote:
It is completely ineffective.
[YOCTO #10843]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Add patch that removes hardcoded installation directories.
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Various changes needed to enable to run Toaster in the
Build Appliance:
1. Pre-install packages as specified by the file
"bitbake/toaster-requirements.txt"
2. Include pip3 in the image
3. Include tzdata in the image (needed by django)
4. Bump SRCREV to a commit with proper settings.py (ALLOWED_HOSTS)
for Django 1.8.16
5. Added README_VirtualBox_Toaster.txt to provide steps for
configuring VirtualBox network adapters (NAT or Bridged)
and steps to launch Toaster
[YOCTO#10767]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Previously if IMAGE_TYPEDEP_* contained a conversion type of the form,
"foo.bar", the dependency on CONVERSION_DEPENDS_bar would not get added
to the task depends for do_rootfs.
[YOCTO #10883]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a test that ensures if IMAGE_TYPEDEP_* contains a conversion type,
that the corresponding CONVERSION_DEPENDS_ for that type gets added to
the dependency tree for do_rootfs.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Add localstatedir and sysconfdir class-native configure definitions to
override OE default sysroot values.
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add 0001-local.mk-fix-cross-compiling-problem.patch to fix the following
cross compiling problem.
| Makefile:3418: *** Recursive variable 'INSTALL' references itself (eventually). Stop.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
summary of changes
http://git.musl-libc.org/cgit/musl/commit/?id=8fe1f2d79b275b7f7fb0d41c99e379357df63cd9
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Added <layer>/wic directory to the list of paths to look
for wks files. This makes wic behaviour consistent when
invoked manually and by bitbake.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These alternatives are only used to provide an unversioned brcmfmac-sdio.bin,
which was required by kernels prior to 3.13. As these alternatives all have the
same priority there's no determinism in which one is selected, and current
kernels (since January 2014) use the appropriately versioned firmware names.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Since the gummiboot project is no longer being maintained
and we are using systemd-boot as a replacement instead,
we can now clean up all remaining gummiboot files.
[YOCTO #10332]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Juro Bystricky
Alejandro Hernandez
André Draszik
Leonardo Sandoval
Ross Burton
Patrick Ohly
Khem Raj
Andre McCurdy
Christoph Settgast
Andreas Müller
Maxin B. John
Chen Qi
Zheng Ruoqin
Linus Wallgren
Ola x Nilsson
Amarnath Valluri
Jose Perez Carranza
Haiqing Bai
Derek Straka
Mark Asselstine
Saul Wold
Alejandro del Castillo
Randy Witt
Ed Bartosh