| Age | Commit message (Collapse) | Author |
|---|
|
It is useful to know which layer provided a given recipe and its
binary packages.
Many projects combine a number of layers and some of them
also provide same recipe names in which case bitbake
can prioritize between them. buildhistory can record
the decision by saving the layer from where the recipe
was taken from.
Also, if a project is split to sub projects which maintain
recipes in different meta layers, then meta layer specific
summaries of e.g. disk usage can be calculated if
source recipes meta layer name is recorded for example in
buildhistory.
If source layer is not in build history, then layer providing
the recipe can be exported from build environment using
'bitbake-layers show-recipes', but it takes a long time to execute
since all recipes are parsed again and requires full source tree
with correct build configuration.
This patch exports the name of layer as configured in BBFILE_COLLECTIONS
append of its layer.conf. 'bitbake-layers show-recipes' exports the
meta layers directory path name. For several open source layers
these are different, e.g. meta-openembedded/meta-perl/conf/layer.conf
is perl-layer, poky/meta/conf/layer.conf is core,
poky/meta-skeleton/conf/layer.conf is skeleton etc.
Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For the native tools, a static patch inserted gcc/g++/ld/ar while later
adding BUILD_LDFLAGS and BUILD_CFLAGS with sed. Now it's all done with sed,
which has the advantage that it uses the actual compile variables. However,
in practice those are the same.
More importantly, picking the build tools for the target was
broken. ovmf-native tried to insert TARGET_PREFIX into the tools
definition file, but that variable is empty in a native recipe. As a
result, "gcc" was used instead of "${HOST_PREFIX}gcc", leading to an
undesirable dependency on the host compiler and potentially
(probably?!) causing some of the build issues that were seen for ovmf.
The new approach is to override the tool selection in ovmf-native so
that the HOST_PREFIX env variable is used, which then gets exported
during do_compile for the target.
While at it, Python code that gets appened to do_patch only to call
shell functions gets replaced with the do_patch[postfuncs] mechanism.
Incremental builds now always use the tools definition from the
current ovmf-native; previously, only the initial build copied the
template file.
Probably the entire split into ovmf-native and ovmf could be
removed. This merely hasn't been attempted yet.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently, bin/go and bin/gofmt collide between go-native
and go-bootstrap-native packages, these are scripts anyway
which call the go compiler proper from right install, in
this case create go1.4 and gofmt1.4 names for these scripts
to avoid namespace collision
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Default CC is same as used here, there is no need to
duplicate it, as a plus it helps in compiling acpitests with
non-gcc cross compilers
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This test was attempting to exercise a broken test, for some reason this broke
with patches under review but investigation revealed that the test itself is
broken. The test has been removed, so there's no need to test it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This test aims to detect binaries in /bin which link to libraries in /usr/lib,
for the case where the user has /usr on a separate filesystem to /.
However it doesn't scan both image/ and the sysroot, so if a binary in /bin
links to a library in /usr/lib that was built by the same recipe then it will
error out.
This test isn't enabled by default, and because of this serious bug I suspect
nobody else is enabling it either. As /usr being on a separate partition to /
is a very rare configuration these days I think we should delete the test: if
someone cares sufficiently they should write a test that actually works.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Changes to PRIVATE_LIBS should change the sstate checksum. To make
that happen, it needs to be listed in the list of package specific
variables, therefore add it.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Building the C++ bindings for native requires a host C++ compiler with
C++11 support. Since these bindings are currently not needed, we can
disable them and thus avoid increasing the requirement for the host C++
compiler.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In a stateless image, /etc is not a good place for the "build"
file. By definining the location with a variable it becomes possible
to have the file created elsewhere on a per-image basis. The default
is the same as before.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
fsck.ext will return an error code of 1 if a file systems was checked
and successfully repaired. Even when an optimization was performed it
will return this error code.
This patch will change the error code to 0 if only optimizations had
changed the file systems.
The reason for this patch is a question I asked at the ext4 ML:
http://www.spinics.net/lists/linux-ext4/msg55700.html
Backport from git://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git
Based on commit bf9f3b6d5b10d19218b4ed904c12b22e36ec57dd
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When using multilib configurations either on arm/arm64 and x86/x86-64
python3 failed to execute due to a failure when looking for its
platform independent and dependent libraries.
This patch fixes this issue by assigning lib_python to the appropriate
macro.
[YOCTO #10812]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Jose Lamego <jose.a.lamego@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A recent patch to bitbake fixes these datastore operations so that they
actually affect the server end, so we should test that they work.
(For full disclosure, some of these tests would probably pass without
those fixes, since the operation would be done on the client side
instead - but we are at least exercising the code paths.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Having changes the sdk test to cpio from cvs, we no longer require an
editor to be present. This patch removes vi from the list of required
tools.
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We currently fetch,configure,build, and install cvs as our test for the
sdk. cvs unfortunately, requires a default editor in order to run. The
change in 94790a8254d6 that checks to see if you have something like vi
installed is fragile since you may have a different default editor. This
patch switches from using cvs as a test to using cpio. cpio also uses
autotools so the functionality tested is equivalent.
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When rewriting the do_rm_work injection, do_rm_work_all had been
removed because it seemed obsolete, as do_build now always triggers
do_rm_work.
However, do_build does not get triggered for all recipes and thus
do_rm_work was not called for recipes that got built only
partially. For example, zlib depends indirectly on
zlib-native:do_populate_sysroot. Because of that dependency,
zlib-native got compiled, but do_rm_work was never called for it.
Re-introducing do_rm_work_all fixes that by making do_build depend on
do_rm_work_all, which then recursively depends on do_rm_work of all
dependencies. This has the unintended side-effect that do_rm_work then
also triggers additional work (like do_populate_lic) that normally
doesn't need to be done for a build. This seems like the lesser evil,
compared to an incomplete cleanup because it mostly enables the
lighter tasks after do_populate_sysroot.
The real solution would be to have two kinds of relationships: a weak
ordering relationship ("if A and B are enabled, A must run before B,
but B can also run without A") and hard dependencies ("B cannot run
unless A has run before").
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Depending on wic-tools:do_build pulls a lot of additional, indirect
dependencies into the image sysroot during do_image_wic as soon as
rm_work.bbclass is active, because then we have
do_build->do_rm_work_all->[all dependencies]. One of those
dependencies is libgcc-initial, which clashes with libgcc itself,
leading to errors in extend_recipe_sysroot like this:
Exception: FileExistsError: [Errno 17] File exists: '.../tmp/sysroots-components/corei7-64/glibc-initial/usr/include/fstab.h' -> '.../tmp/work/intel_corei7_64-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/include/fstab.h'
As the image recipe only needs the sysroot of wic-tools and does not
need to wait for the build of wic-tools to finish, depending on
do_populate_sysroot is the better choice and happens to avoid
the problem above.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
section for each dtb
Before this, dtb sections were named by their position index in KERNEL_DEVICETREE. Also there was only one item in the config section, so only the first dtb was seen by the bootloader.
This patch adds a config section for each dtb named by the dtb filename. This is what bootloaders usually know about the machine they run on.
Signed-off-by: Florian Wickert <fw@javox-solutions.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
mips definition of kernel_sigaction was added later
and the patch did not apply to mips part which ended
in ltp failing to compile on mips parts
In file included from rt_sigaction01.c:42:0:
../../../../include/lapi/rt_sigaction.h:39:2: error: unknown type name '__sighandler_t'
__sighandler_t k_sa_handler;
^~~~~~~~~~~~~~
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Using of bitbake environment variables in-place of hardcoded strings makes this
recipe portable to all environments.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use appropriate bitbake variable inplace of hardcoded sbin path in Makefile
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Do not assume '/lib' for kernel modules location, instead use
${nonarch_base_libdir}. When 'usrmerge' is enabled, kernel modules are not
located in /lib/modules, but /usr/lib/modules.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
|
|
net-tools Makefile was hardcoded sbin, bin installation paths to /bin and /sbin
respectively. This change moves the installed files to appropriate location as
per configured bitbake environment.
This might be solved much better way by patching Makefile, but that causing
build issues, as net-tools recipe is using pre-generated config.{h/status}.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
|
|
Move binary(ies) only when ${base_bindir} != ${bindir}.
When usrmerge is enabled they both can point to same location.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
|
|
Replace hardcoded '/lib' in kernel firmware installation path with
${nonarch_base_libdir}.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
|
|
Replace hardcoded '/lib' in kernel modules installation path with
${nonarch_base_libdir}, which is meant exactly for this.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
|
|
Both shadow and util-linux packages provides 'nologin' binary in ${base_sbindir}
and ${sbindir} respectively, this leads to conflict when 'usrmerge' feature is
enabled, where ${sbindir} == ${base_sbindir}. Hance, handle this to alternative
system to resolve the conflict.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
|
|
package.
update-alternative.bbclass might rename the 'reset' binary when LINK_NAME ==
TARGET, This is true (${base_bindir} == ${bindir}) in 'usrmerge' distros.
Hence, suffix with * to properly package the renamed binary.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
|
|
libnss_* files should be part of corresponding sub-packages, the split happens
by do_package_split(). By adding ${libdir}/libnss_* to FILES_${PN}, those files
end up in the systemd package when ${libdir} == ${base_libdir}.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
|
|
Stop creating the static library archive(liba(ttr|cl).a) when --disable-static
configure option used.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
|
|
Make sure fsck.cramfs is packaged before fsck so the latter
does not steal the fsck.cramfs binary when building with usrmerge.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
|
|
If base_bindir=bindir, /usr/sbin/ldconfig gets packaged into glibc-utils instead
of glibc: Switch PACKAGES order to prevent this.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
|
|
Previously, with USERADD_ERROR_DYNAMIC set to error/warn, if a static
UID/GID was specified in the recipe, then no error/warning would be
issued even if no ID was specified in the passwd/groups files.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If this bbclass is used and a recipe specifies a static ID for a
user/group as part of the USERADD_PARAM_${PN} or GROUPADD_PARAM_${PN},
the build would fail with and error like this if there was no
corresponding ID in the passwd/group files specified via
USERADD_UID_TABLES/USERADD_GID_TABLES:
ERROR: meta-oe/recipes-support/postgresql/postgresql_9.4.11.bb:
meta-oe/recipes-support/postgresql/postgresql_9.4.11.bb inherits
useradd but doesn't set USERADD_PARAM, GROUPADD_PARAM or
GROUPMEMS_PARAM for package postgresql
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Often, eg when using angular2, there's a need to install also
the devDependencies.
The default is to keep the old behaviour, to not install
devDependencies.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The current definition for ARM_THUMB_SUFFIX doesn't consider armv8
and will therefore cause TUNE_PKGARCH to be set incorrectly for
machines which inherit arch-armv8 and don't include aarch64 in
TUNE_FEATURES (ie when building for 32bit ARMv8).
Also fix typo in comments and improve TUNEVALID[thumb] wording.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The purpose of this test case is to verify that
devtool modify works correctly when building
the kernel.
[YOCTO #10817]
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
bb.data.expand(x, d) is deprecated API.
[YOCTO #10678]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
runqemu is using sudo to configure tap networking. Without sudo
in HOSTTOOLS_NONFATAL it may cause bitbake -c testimage to fail
with this error:
runqemu - INFO - Setting up tap interface under sudo
/bin/sh: sudo: command not found
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Configured guest network interface through serial connection
when kernel is not run by qemu.
This should make it possible to test wic images with testimage.
[YOCTO #10833]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Parsed runqemu output to get guest network configuration
if it's not present in runqemu command line.
[YOCTO #10833]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
16777216 bytes is a minimal possible filesystem size for BTRFS.
mkfs.btrfs fails to create a filesystem if rootfs size is too small.
Increased filesystem size to make it possible for mkfs.btrfs
to create an image for small rootfs directories,
e.g. for core-image-minimal.
[YOCTO #11163]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit adb71e06768adadda7b69c3b5e81ca3ad67237f4.
Upstream restored the original hashes.
|
|
oe-core 759eed (binutils: Enable threading when gold is enabled and is not
default linker) causes linking in mingw SDKs to fail:
.../work/i686-nativesdk-mingw32-pokysdk-mingw32/binutils-cross-canadian-x86-64/2.28-r0
/recipe-sysroot-native/usr/bin/i686-pokysdk-mingw32/../../libexec/i686-pokysdk-mingw32/gcc/i686-pokysdk-mingw32/6.3.0/ld:
cannot find -lpthread
Work around this by disabling gold entirely in mingw SDKs.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This only started showing up now for some reason but it does seem like
a legitimate bug in Makefile.am.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Eclipse plugin uses cmake from the SDK and currently has issues
because cmake is not installed as a host tool. This patch adds cmake as
a host tool for the sdk/esdk.
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
As of ccache-3.3, ccache tries to ensure that the paths in the debug
information are always correct. It does this by including the current
directory in the hash if debug output is enabled. It includes support for
detecting remapping via a single -fdebug-prefix-map argument uses the
remapped directory in the hash instead.
The DEBUG_PREFIX_MAP in bitbake.conf remaps the source directory, target
sysroot and native sysroot separately which results in multiple
-fdebug-prefix-map arguments. Although ccache passes all these arguments
through to the compiler, it only enables the special behaviour described
above if the last one matches the current directory. (See
https://github.com/ccache/ccache/issues/163 )
Even if ccache did correctly honour each of the remapping arguments, the
hashes would still be different every time ${PV} or ${PR} change because
the default DEBUG_PREFIX_MAP contains maps to paths including them.
So it seems that for ccache to be of any use with this configuration,
CCACHE_NOHASHDIR needs to be set.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Helped-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Mikko Rapeli
Patrick Ohly
Khem Raj
Ross Burton
Peter Kjellerstedt
Daniel Schultz
Jose Lamego
Paul Eggleton
brian avery
Florian Wickert
Amarnath Valluri
Jussi Kukkonen
Anders Darander
Andre McCurdy
Jose Perez Carranza
Joshua Lock
Ed Bartosh
Richard Purdie
Mike Crowe
Denys Dmytriyenko