| Age | Commit message (Collapse) | Author |
|---|
|
Setting DESCRIPTION to the same value as SUMMARY doesn't do anything,
since the value of DESCRIPTION will be derived from SUMMARY if not
specified.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Set SUMMARY instead of DESCRIPTION
* Move packaging variables to the end
* Fix spacing in LICENSE assignment
* Fix indenting
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Set FILESEXTRAPATHS instead of FILESPATH
* Don't set THISDIR, it's already set by base.bbclass
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Also tidy up value a little bit.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop FILESPATHPKG setting since it seems to be superfluous.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
targets
Add a new module which abstracts the target object used by testimage.bbclass
The purpose of this module is to move the deployment of a target from testimage.bbclass,
basically abstracting different implementations of how we setup a target and how it runs commands.
It allows to select one implementation or another by setting TEST_TARGET (currently to: "qemu" and "simpleremote").
QemuTarget is used to start a qemu instance (as it's currently done in testimage.bbclass)
SimpleRemoteTarget is meant for a remote machine (by setting TEST_TARGET_IP) that's already up and running
with network and ssh.
Simply put, it opens the door for running the tests on different types of targets by adding new classes
(maybe qemu-nfsroot or remote-special etc.). One could also override BaseTarget which currently uses
the existing SSHControl module and add a serial implementation.
[ YOCTO #5554 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch makes the necessary changes for using the targetcontrol.py module
so that one can run the same tests on a qemu instance or a remote machine
based on the value of TEST_TARGET variable: "qemu" or "simpleremote".
The default value is "qemu" which starts a qemu instance and it's the
with what we currently have.
With "simpleremote", the remote machine must be up with network and ssh
and you need to set TEST_TARGET_IP with the IP address of the remote machine
(it can still be a qemu instance that was manually started).
Basically testimage.bbclass now does something along the lines of:
- load tests -> deploy (prepare) / start target -> run tests.
There were a couple of changes necessary for tests and
also some cleanups/renames that were needed to adjust this change. (use
ip everywhere when refering to target and server_ip when refering to host/build machine)
Also two unnecessary and unsed methods were dropped from sshcontrol.
[ YOCTO #5554 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
buildtest-TESTS and runtest-TESTS targets are required by ptest.
In order to have those targets in automake 1.13.4, serial-tests
should be specified since parallel test is assumed by default
and serial-tests is optional.
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Python recipe did a sed s/ccache/$(CCACHE) on the Makefile, which
replaces all "ccache" including ones that consist of a full path.
This leads to build error when building in a project path with
"ccache" in its name. Fix it by only replacing "ccache " with
"$(CCACHE) ".
Signed-off-by: Lei Liu <lei.liu2@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the new manifest file instead of ${WORKDIR}/installed_pkgs.txt for determining
if an image has a certain package, because installed_pkgs.txt goes away with rm_work
enabled.
We can't use the IMAGE_MANIFEST var for the file path because that relies on IMAGE_NAME which
changes at every run (because of date), so we use the link which points to the last
one built.
[ YOCTO #5072 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bitbake-layers
Tests for bitbake-layers and expected output for some bitbake options.
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Build images and tests different build options like RM_OLD_IMAGE
and for WARN_QA/ERROR_QA behaviour.
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
various scripts
The purpose of oe-selftest is to run unittest modules added from meta/lib/oeqa/selftest,
which are tests against bitbake tools.
Right now the script it's useful for simple tests like:
- "bitbake --someoption, change some metadata, bitbake X, check something" type scenarios (PR service, error output, etc)
- or "bitbake-layers <...>" type scripts and yocto-bsp tools.
This commit also adds some helper modules that the tests will use and a base class.
Also, most of the tests will have a dependency on a meta-selftest layer
which contains specially modified recipes/bbappends/include files for the purpose of the tests.
The tests themselves will usually write to ".inc" files from the layer or in conf/selftest.inc
(which is added as an include in local.conf at the start and removed at the end)
It's a simple matter or sourcing the enviroment, adding the meta-selftest layer to bblayers.conf
and running: oe-selftest to get some results. It would finish faster if at least a core-image-minimal
was built before.
[ YOCTO #4740 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't normally perform any operations (such as "git pull") that
trigger "git gc --auto", thus garbage collection never happens which
means performance of accessing the repository degrades noticeably over
time. Add an explicit "git gc --auto" to clean things up when needed.
Thanks to Elijah Newren and Ross Burton for suggesting this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disable several python functions if not parsing within the worker
context. This avoids executing expensive operations while parsing
recipes (which is unnecessary).
(Thanks to Richard Purdie for pointing out the issue and suggesting the
workaround.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use a function added to SSTATEPOSTINSTFUNCS and read the necessary
information out of pkgdata, instead of using a function executed
during do_package that reads the data directly. This has two benefits:
* The package info collection will now work when the package content is
restored from shared state
* Adding/removing the inherit of buildhistory will no longer change the
do_package signatures and force re-execution of that function for
every recipe.
Fixes [YOCTO #5358]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add PACKAGE_EXCLUDE and NO_RECOMMENDATIONS to the info we track for
images, since these can change what ends up in the image.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This should have been removed when the implementation was rewritten in
OE-Core commit 2179db89436d719635f858c87d1e098696bead2a. The collected
values weren't being used anywhere since then.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These are important parts of the version for every package, so we should
include them in PKGDATA just as we include PV/PR/PKGV/PKGR.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We were using "du -sk" to collect the total size of all files in each
package for writing out to PKGSIZE in each pkgdata file; however this
reports the total space used on disk not the total size of all files,
which means it is dependent on the block size and filesystem being used
for TMPDIR on the build host. Instead, take the total of the size
reported by lstat() for each packaged file, which we are already
collecting for FILES_INFO in any case.
Note: this changes PKGSIZE to be reported in bytes instead of kilobytes
since this is what lstat reports, but this is really what we should be
storing anyway so that we have the precision if we need it.
Fixes [YOCTO #5334]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The FILES_INFO entry in each pkgdata file stores the list of files for
each package. Make the following improvements to how this is stored:
* Store paths as they would be seen on the target rather than
erroneously including the full path to PKGDEST (which is specific to
the build host the package was built on)
* For simplicity when loading the data, store complete paths for each
entry instead of trying to break off the first part and use it as the
dict key
* Record sizes for each file (as needed by Toaster)
* Serialise the value explicitly using json rather than just passing it
through str().
Fixes [YOCTO #5443].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Looking at the code, it should be ICECC_USER_PACKAGE_BL and not
ICECC_PACKAGE_BL here, and also fix "localy" -> "locally".
Thanks to Scott Rifenbark for pointing this out.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
image.bbclass now depends on virtual/kernel:do_deploy, so add a task for that.
This fixes errors like this:
ERROR: Task do_build in /build/linaro/build/meta-linaro/meta-linaro/recipes-linaro/images/linaro-image-lng.bb depends upon non-existent task do_deploy in /build/linaro/build/openembedded-core/meta/recipes-kernel/linux/linux-dummy.bb
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When fortran was enabled, builds were failing due to a extra files.
For now we can remove these and avoid the build failure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is little point in including the file twice so lets not. The
main recipe already included it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ICU presence is auto-detected at configure time and until recently (e68850 and
d61230) was pulled into most builds through harfbuzz and beecrypt. Now it's
floating and this leads to build failures.
As in all likelihood the majority of people were building this with ICU enabled,
add an explicit dependency.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
WARNING: QA Issue: sqlite3: configure was passed unrecognised options: --disable-tcl
There is no tcl option or support now so remove the option.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
WARNING: QA Issue: util-linux-native: configure was passed unrecognised options: --enable-rdev --enable-init --enable-arch --with-fsprobe
Remove obsolete configure options to silence warning.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating the 3.10 SRCREVs for the following fixes:
f47ea28 bridge: enable EBTABLES
a9ec82e e1000: prevent oops when adapter is being closed and reset simultaneously
a4e1bd7 Revert "arm: add dummy swizzle for versatile with qemu"
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bumping the 3.4 kernel to the latest korg -stable release.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating the linux-yocto-3.10 SRCREVs to the latest korg -stable
release.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To mips64 libn32, The HOST_SYS is mips64-*-linux-gnun32, the COMPATIBLE_HOST
is mips64.*-linux, the regular expression matching both will return true. so
append the ending position word into COMPATIBLE_HOST to make match failure
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add busybox_git.bb recipe so that it would be easier to hack with
busybox. Set DEFAULT_PREFERENCE to "-1" in the git recipe so that we
still use the busybox_1.21.1.bb recipe by default.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The carl9170fw is unbuilt, needs specialise toolchains, cmake and so on
so we might as well delete it (and lose the bash dependnecy).
Equally, the top level bash dependency from the empty configure script is
pointless.
[YOCTO #5555]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make wiper appear before hdparm in PACKAGES so that wiper is packaged
correctly.
[YOCTO #5555]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
WARNING: QA Issue: nativesdk-libsdl: configure was passed unrecognised options: --disable-video-gem --disable-video-xbios --enable-dlopen --disable-debug --enable-endian
The gem and xbios options exist but their helptext is wrong and there
is no "video" in the name. This patch removes the now obsolete options
and corrects the names of the others to match reality.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the transition from svn -> tarball release, this issue was
missed. Instead of using autogen.sh, we can call configure
directly.
[YOCTO #5606]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
De-bash some script in lsb to make it not dependent on bash.
[YOCTO #5555]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that none of the packagegroups depend on virtual/kernel, we have the problem
that MACHINE=qemumips bitbake core-image-minimal doesn't put a kernel
into the deploy directory. This breaks many common usecases and
user expectations.
To avoid this, add a dependency on the kernel deploy to image do_build tasks.
This should avoid any circular dependency issues but equally ensure users
have their expectations met.
[YOCTO #5581]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gcc has cross and target components with a shared workdir. The unpack umask
settings need to match for all of these. We need to use strings in each
case to ensure the sstate code matches them correctly.
This patch tweaks various things to ensure the change adding the unpack umask
change doesn't break the compiler builds.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the "ABI safe" recipes, we've been excluding those from signatures. This
is fine in the general case but in the specific case of image recipes it breaks.
A good test case is the interfaces file. Editting this causes init-ifupdown
to rebuild but not an image containing it (e.g. core-image-minimal).
We need to ensure the checksums are added to the image recipes and this change
does that.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* when git checkouts files from fetched clone it respects system umask
and creates files with different permissions, if such files are copied
to packages, resulting target images have also different permissions
on them.
* we need reproducible builds across different builders with different
system umask, so set 022 umask
[YOCTO #5590]
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* 30xinput_calibrate.sh is calling ". /etc/formfactor/config"
breaking Xsession for images without formfactor
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The comment was originally written for module.bbclass and is now
slightly misleading. This updates it to match the current code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Paul Eggleton
Stefan Stanacar
Tudor Florea
Yue Tao
Corneliu Stoicescu
Alexandru Palalau
Cristiana Voicu
Koen Kooi
Richard Purdie
Ross Burton
Bruce Ashfield
Roy Li
Li Wang
Chen Qi
Yi Zhao
Martin Jansa