| Age | Commit message (Collapse) | Author |
|---|
|
New version uses Gtk+3. 3.20 release requires a bunch of fixes to
build without polkit, this git revision inclues those fixes.
* Add patch to use proper U64_TO_POINTER macro to fix build on
32 bit platforms.
* Forward port memory barrier patches for arm & mips
* sysprof builds with loads of warnings and git builds also use
-Werror: avoid that by setting "--enable-compile-warnings"
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These patches backport the upstream changes for powerclamp to support APL APU.
Dasaratharaman Chandramouli (1):
intel powerclamp: support Knights Landing
Jacob Pan (2):
thermal/powerclamp: add cpu id for denlow platform
thermal/powerclamp: remove cpu whitelist
Radivoje Jovanovic (2):
thermal/powerclamp: add cpu id for skylake h/s
thermal/powerclamp: add cpu id for Skylake u/y
Signed-off-by: Yu, Ong Hock <ong.hock.yu@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Backporting mainline patches to add always running timer support (ART).
The main advantage of ART is that ART can be captured
simultaneous to the capture of audio and network device clocks,
allowing a correlation between timebases to be constructed.
Arnd Bergmann (1):
ntp/pps: replace getnstime_raw_and_real with 64-bit version
Christopher S. Hall (4):
time: Add cycles to nanoseconds translation
time: Add timekeeping snapshot code capturing system time and counter
time: Add driver cross timestamp interface for higher precision time synchronization
x86/tsc: Always Running Timer (ART) correlated clocksource
DengChao (1):
timekeeping: Provide internal function __ktime_get_real_seconds
Signed-off-by: Yong, Jonathan <jonathan.yong@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Integrating upstream changes for intel_idle to support BXT CPU.
Dasaratharaman Chandramouli (1):
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
Len Brown (4):
intel_idle: Skylake Client Support
intel_idle: Skylake Client Support - updated
intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
intel_idle: add BXT support
Signed-off-by: Yu, Ong Hock <ong.hock.yu@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Integrating the korg -stable release.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Integrating the 4.1.25 and 4.1.26 stable releases.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Backporting the following commits for BXT and other device support:
b4acdc6d1ea9 serial: 8250_dw: Do not use readl/writel before checking port iotype
c439afb78cda serial: 8250_dw: Add support for big-endian MMIO accesses
9227cc288f7e serial: 8250_dw: Avoid serial_outx code duplicate with new dw8250_check_lcr()
9d608cf2b4c5 serial: 8250_dw: don't set UPF_BOOT_AUTOCONF flag
db4e65b3a854 serial: 8250_dw: cleanup dw8250_setup_port
f4885484ee87 serial: 8250_dw: cleanup dw8250_idma_filter
0912b12e5df0 serial: 8250_dw: rename and comment the fallback dma filter
3436bb74c86b serial: 8250_dw: proper support for UARTs without busy functionality
fac8ac4a8074 serial: 8250_dw: add dw8250_quirks function
0bba963bdd94 serial: 8250_dw: only setup the port from one place
d01850ea5471 serial: 8250_dw: hook the DMA in one place
585f11e24199 serial: 8250_dw: adapt to unified device property interface
df44bc6d8b61 serial: 8250_dw: add separate pointer for the uart_port to dw8250_probe
84e9183637e7 serial: 8250_dw: allow lower reference frequencies
70ce481f5678 serial:8250_dw: do not alter CTS and DCTS since AFE is enabled
739968950dc4 serial: 8250: Auto CTS control by HW if AFE enabled
074cdf88d099 serial: 8250_dw: support ACPI platforms with integrated DMA engine
0bb15fc79c22 serial: 8250_dma: no need to sync RX buffer
45082f48e5c6 dmaengine: idma: rename to INTEL_IDMA64
1f4c5fb48460 mmc: sdhci-acpi: Set MMC_CAP_AGGRESSIVE_PM for Broxton controllers
6963cc8f6e2e mmc: sdhci-pci: Set MMC_CAP_AGGRESSIVE_PM for Broxton controllers
aab588165ee4 mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers
c51e080a85ac mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL
fbbad4798f9c mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
ce6717f7195e mmc: sdhci: Allow override of get_cd() called from sdhci_request()
abceeaf8efc8 mmc: sdhci: Allow override of mmc host operations
279c8ddf6b6d mmc: sdhci: make max-frequency property in device tree work
6e9d3ad3a003 mtd: spi-nor: add support for w25q128fw
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
oprofileui doesn't work anymore with not-so-recent changes to the oprofile
command line interface, and perf is becoming the expected profiling solution so
any future profiling tools should be using that instead.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
systemtap has a floating dependency on ncurses but as bash is a RDEPENDS the
build-rdeps sanity test doesn't fire due to a limitation of the test.
Add an explicit dependency on ncurses to ensure the build is deterministic.
[ YOCTO #9709 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Backporting the following mcc commits to the 4.4 repo. These fix issues
being seen on broxton based boads:
1f3e98df094c mmc: core: Add a facility to "pause" re-tuning
b27fcd162327 mmc: block: Pause re-tuning while switched to the RPMB partition
9aa07b4e274e mmc: block: Always switch back to main area after RPMB access
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Importing i2c dtsi support from linux-omap. This enables the
busses for future development and application support.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove docproc-build-fix.patch, as the build problem it's fixing
now happens only if building html docs is explicitly enabled
(which we do not do).
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop kexec-tools-Refine-kdump-device_tree-sort.patch, it's
merged upstream.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is only one version of python 2.x provided, so no need
to set a preferred version.
PYTHON_BASEVERSION is now set explicitly in python-dir.bbclass and
python3-dir.bbclass, so fix up a few recipes that relied on it being
set in default-versions.inc without inheriting python-dir.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
BUILD_SYS variables
The code that utilized them was superseded by the code (in the same patch!)
that is utilizing STAGING_LIBDIR/STAGING_INCDIR, and wasn't correct in the
first place as HOST_SYS is not necessarily the same as the sysroot directory
name.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
We had a partial musb change merged into the 4.1 tree, which resulted in:
| kernel-source/drivers/usb/musb/musb_dsps.c:
In function 'dsps_create_musb_pdev':
| kernel-source/drivers/usb/musb/musb_dsps.c:750:8:
error: 'struct musb_hdrc_config' has no member named 'maximum_speed'
| config->maximum_speed = usb_get_maximum_speed(&parent->dev);
| ^~
By backporting commit:
9b7537642cb6a [usb: musb: set the controller speed based on the config setting]
We get our missing structure field, and we can once again build musb.
[YOCTO: #9680]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Reverting the change that moved common-pc* to the intel staging
branches. This means that genericx86, qemux86*, etc, will continue
to use standard/base.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To provide timely support for Intel platforms, without risking
issues with other platforms, we create intel branches from the
common variants.
i.e. We now have standard/intel, which is from standard/base
These branches will be managed like any other in the tree, and
will get common -stable, -rt, bugs and CVE updates.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Integrating the following mainline backports for better Broxton
support:
Adrian Hunter (3):
mmc: sdhci: Remove SDHCI_SDR104_NEEDS_TUNING
mmc: mmc: Attempt to flush cache before reset
mmc: mmc: Fix partition switch timeout for some eMMCs
Andy Shevchenko (12):
device property: always check for fwnode type
device property: rename helper functions
device property: refactor built-in properties support
device property: keep single value inplace
device property: improve readability of macros
device property: return -EINVAL when property isn't found in ACPI
device property: Fallback to secondary fwnode if primary misses the property
mfd: core: propagate device properties to sub devices drivers
mfd: intel-lpss: Pass HSUART configuration via properties
device property: avoid allocations of 0 length
lib/string: introduce match_string() helper
device property: convert to use match_string() helper
Bamvor Jian Zhang (1):
gpiolib: do not allow to insert an empty gpiochip
Christophe RICARD (2):
ACPI: Rename acpi_gsi_get_irq_type to acpi_dev_get_irq_type and export symbol
ACPI / gpio: Add irq_type when a GPIO is used as an interrupt
Dasaratharaman Chandramouli (1):
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
Gwendal Grignou (1):
mmc: core: Do regular power cycle when lacking eMMC HW reset support
Heikki Krogerus (4):
device property: helper macros for property entry creation
device property: the secondary fwnode needs to depend on the primary
device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
device property: fix for a case of use-after-free
Len Brown (2):
intel_idle: Add SKX support
intel_idle: add BXT support
Linus Walleij (1):
Revert "gpio: revert get() to non-errorprogating behaviour"
Mika Westerberg (7):
pwm: lpss: Remove ->free() callback
pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
device property: Take a copy of the property set
driver core: platform: Add support for built-in device properties
mfd: intel-lpss: Add support for passing device properties
mfd: intel-lpss: Pass SDA hold time to I2C host controller driver
mfd: intel-lpss: Pass I2C configuration via properties on BXT
Qipeng Zha (1):
pinctrl: intel: make the high level interrupt working
Richard Cochran (10):
intel_idle: remove useless return from void function.
intel_idle: Fix a helper function's return value.
intel_idle: Remove redundant initialization calls.
intel_idle: Fix deallocation order on the driver exit path.
intel_idle: Fix dangling registration on error path.
intel_idle: Avoid a double free of the per-CPU data.
intel_idle: Setup the timer broadcast only on successful driver load.
intel_idle: Don't overreact to a cpuidle registration failure.
intel_idle: Propagate hot plug errors.
intel_idle: Clean up all registered devices on exit.
Wolfram Sang (1):
mmc: make MAN_BKOPS_EN message a debug
qipeng.zha (1):
pwm: lpss: Update PWM setting for Broxton
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
- change in amdgpu firmware copyright year
- change in radeon firmware copyright year
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rename do_kernel_link_vmlinux to do_kernel_link_images and make a
symbol link to vmlinuz(if exists) for reference in arch/$arch/boot
directory.
Signen-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add KERNEL_IMAGETYPES to support building packaging and installing
multi types of kernel images, such as zImage uImage, at one time.
KERNEL_IMAGETYPE and KERNEL_ALT_IMAGETYPE work as before.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Updating to the korg stable release.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Merging the following meta data change:
[
In the current codes, we build the drivers for usb controller as
modules. But for some image types, such as minimal or
full-cmdline, these driver modules are not installed to the rootfs by
default. This makes the using of the usb pretty inconvenience. So
make them all builtin.
Reported-and-suggested-by: hiims <h@101.org.il>
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bumping to the v4.1.24 -stable release, and backporting a ppc
gcc6 fix from the 4.4 kernel.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
PREFERRED_PROVIDER_virtual/kernel isn't set to linux-yocto-rt
* just like linux-yocto-dev is doing
* fixes following errors in world builds:
ERROR: Nothing PROVIDES 'linux-yocto-rt' (but /home/jenkins/oe/world/shr-core/openembedded-core/meta/recipes-rt/images/core-image-rt-sdk.bb DEPENDS on or otherwise requires it)
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: Required build target 'core-image-rt-sdk' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-rt-sdk', 'linux-yocto-rt']
ERROR: Nothing PROVIDES 'linux-yocto-rt' (but /home/jenkins/oe/world/shr-core/openembedded-core/meta/recipes-rt/images/core-image-rt.bb DEPENDS on or otherwise requires it)
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: Required build target 'core-image-rt' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-rt', 'linux-yocto-rt']
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Linux 4.5 and later cause lttng-modules versions prior to 2.7.2 to fail
to compile due to Linux vmscan changes. See lttng-modules git commit
d0d2908478bdc8c36faaeae6fcb687052cb5f93b on lttng-modules branch
stable-2.7: "Fix: update vmscan instrumentation for kernel 4.5".
Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It doesn't need them.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
"/usr/src/kernel" is being hard-coded in multiple recipes so far, move its
definition to bitbake.conf.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Khem provided fixes to fix gcc6 build issues, these are safe for
all gcc versions, so we integrate them directly.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To enable modsetting out of the box, we must turn on DRM.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating to the v4.4.9 korg -stable release:
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Integrating the korg -stable releases.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When run the ptest of lttng-tools, it produced many random filename
when the tests passed, the output confused QA analysis, so we need
to filter the ptest output if tests passed and add up the passed and
failed tests.
NOTE:The tests invoked the run.sh twice, so it output like this:
...
FAIL:...
unit_tests statistics
total pass: 133 tests passed!
total fail: 5 tests failed!
...
FAIL:...
fast_regression statistics
total pass: 1904 tests passed!
total fail: 202 tests failed!
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Integrating the korg -stable releases.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Merging the following commits to refactor and add broxton support:
0d73a3bf6129 bsp/intel-corei7-64: Add intel-telemetry feature
cee29e6234c7 features: add intel-telemetry feature
3a700d737b65 bsp/intel-common: Add broxton to supported SoCs in intel-core* BSPs
f584a0c22a39 features: add broxton soc feature
7c2c2bd1a6aa baytrail;valleyisland: Use designware-usb3 feature instead of config
7216db4cc7a6 features/usb: Add usb-designware2 and 3 features
ade182658359 cfg/sound.cfg: Add USB audio support
18ee21d9fba8 features/i915: Add CONFIG_KMS_FB_HELPER=y
b3fa745962c2 features/soc/skylake: Refactor and comment config fragment
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Integrating the following patches for skylake features and config:
82c2ea9f6bf intel-common: enable support for skylake in intel common bsp
269b6a7a98e2 intel-common-drivers: enable OSS Support
71a19d3e6dc6 intel-pinctrl: enable pinctrl driver for skylake
281f7db8c839 features: soc: enable configurations for skylake.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Integrating the following mainline (or mainline destined) patches to
support Intel Broxton:
076cc85486fd mmc: sdhci-acpi: Set MMC_CAP_AGGRESSIVE_PM for Broxton controllers
5d9c3aba78a1 mmc: sdhci-pci: Remove redundant runtime PM calls
aa0cd9a58d54 mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off()
f47597d00af0 mmc: sdhci: 64-bit DMA actually has 4-byte alignment
a052a0703aed mmc: sdhci: Fix DMA descriptor with zero data length
f9200dd4bfec mmc: sdio: Fix invalid vdd in voltage switch power cycle
7bbf49488269 mmc: sdhci: Do not BUG on invalid vdd
39fde8b630a6 tools/power turbostat: decode BXT TSC frequency via CPUID
2b4b633da512 tools/power turbostat: initial BXT support
ee708ab5b74e intel_telemetry_debugfs: Fix unused warnings in telemetry debugfs
3053465d066b intel_telemetry_pltdrv: Change verbosity control bits
4c7732ec34bf platform:x86: Add Intel Telemetry Debugfs interfaces
401915397ddc platform:x86: Add Intel telemetry platform driver
eaaee25ac936 platform/x86: Add Intel Telemetry Core Driver
44c969c62726 platform:x86 decouple telemetry driver from the optional IPC resources
a6a2ecaf9980 platform:x86: Add Intel telemetry platform device
e1f16b86eab0 intel_pmc_ipc: Avoid pending IPC1 command during legacy suspend
ae91be46eb0d intel_pmc_ipc: Fix GCR register base address and length
3e15c1b19c81 intel_pmc_ipc: update acpi resource structure for Punit
5ec614cfd985 intel_punit_ipc: add NULL check for input parameters
4c3f01b178db platform:x86: add Intel P-Unit mailbox IPC driver
4826dbaac15f usb: dwc3: pci: add ID for one more Intel Broxton platform
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In the better late than never category, this commit integrates the
ltsi content into linux-yocto 4.1. We we already matching LTSI on
the kernel version front with a small gap in patches. With this
commit, we have a "ltsi" branch that is pure ltsi on the mailine
kernel, and then that commit is merged into standard/base (to
make it available to all BSPs).
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Integrating the korg -stable releases.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When working on the yocto-bsp and kernel-lab update for yocto 1.2
we found it was impossible for a end-user BSP to isolate patches
on a branch, since with the following commit:
[kernel-yocto: enforce SRC_URI specified branch]
Any new branch would be switched to whatever was specified on the
SRC_URI and undoing the work that the yocto-bsp tool did to support
board specific patches.
To fix this, we'll keep the enforcing of branch consistency enabled
by default, but introduce a variable "KMETA_AUDIT" that when not
set will skip the check.
There's no impact for existing users, and it is only something that
other plumbing commands and tools will need to use (or care about).
[YOCTO: #9120]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Jussi Kukkonen
Bruce Ashfield
Ross Burton
Alexander Kanavin
Maxin B. John
He Zhe
Martin Jansa
Andrew Bradford
Robert Yang
Ming Liu
Khem Raj
Peter Kjellerstedt
Dengke Du