Age | Commit message (Collapse) | Author |
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixed:
lsb-4.1: lsb: Files/directories were installed but not shipped in any package:
/lib32
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install.
lsb: 1 installed and not shipped files. [installed-vs-shipped]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Building a base image such as core-image-minimal with lsb and then
attempting to source /lib/lsb/init-functions, then using the start
_daemon function (to start a daemon, such as syslogd) fails, since
/lib/lsb/init-functions use functions (incl. "daemon()") from file
/etc/init.d/functions.lsbinitscripts, which is provided by package
lsbinitscripts.
Running daemon() then calls /usr/bin/mountpoint, which is provided
by util-linux.
So, lsbinitscripts has been added as an RDEPENDency in lsb, and in
turn util-linux has been added to lsbinitscripts.
[YOCTO #7732]
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Some lsb packages depend on correct lsb-core-ARCH package being
installed (or rather provided) on the target file system. Provide this
package name by main lsb package.
Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The init-functions had been installed to /lib/lsb/init-functions
according to lsb spec, then there is an installed-vs-shipped issue when
build with multilib:
ERROR: QA Issue: lsb: Files/directories were installed but not shipped
/lib
/lib/lsb
/lib/lsb/init-functions [installed-vs-shipped]
Fix the issue and indent.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
According to LSB specification Ref1, LSB checks file
/lib/lsb/init-functions. But for 64 bits system it is installed in
/lib64. Install init-functions to /lib/lsb to conform with LSB
specification.
Link file /usr/lib/sendmail which points to /usr/sbin/sendmail is
required by LSB according to Linux FHS[Ref 2]. But it should be done by
packages which provides command sendmail such as msmtp, postfix and
esmtp etc.
Refs:
1 http://refspecs.linuxfoundation.org/LSB_4.1.0/LSB-Core-generic/LSB-Core-generic/iniscrptfunc.html
2 http://www.pathname.com/fhs/pub/fhs-2.3.html#SPECIFICOPTIONS13
Signed-off-by: Kai Kang <kai.kang@windriver.com>
|
|
The sysroot/${libdir}/sendmail conflicts with esmtp's, and it's a
symlink to ${sbindir}/sendmail which is meaningless for sysroot, so
remove it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
lsb currently depends on util-linux solely for getopt, but that has now
been broken out into util-linux-getopt. Update RDEPENDS accordingly.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Acked-by: Ken Sharp <ken.sharp@ni.com>
Acked-by: Ben Shelton <ben.shelton@ni.com
Acked-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It turns out we have quite a number of Makefiles out there without a
clean target. Rather than have all cases code an empty do_configure, add
a CLEANBROKEN variable which when set to "1" will disable the attempt to
"make clean".
This patch also adjusts various recipes which either have this problem
fixed, or have been reported to have make clean failures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
According to LSB specification:
http://refspecs.linuxfoundation.org/LSB_4.1.0/LSB-Core-generic/LSB-Core-generic/installinitd.html
http://refspecs.linuxfoundation.org/LSB_4.1.0/LSB-Core-generic/LSB-Core-generic/removeinitd.html
commands install_initd and remove_initd should under directory /usr/lib/lsb/.
lsb recipe creates these commands under directory ${libdir} which may
expand to /usr/lib64 when multilib is enabled on qemux86-64. That will
cause LSB command check for install_initd and remove_initd fail. So
correct it.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The install_initd and remove_initd are linked to /sbin/chkconfig for lsb
core test, but chkconfig has been moved from /sbin to /usr/sbin in order
to fix QA warning about unsafe references in binaries.
(In commit e486242db83297701803866bea971a2f1a1135fe)
Let install_initd and remove_initd link to /usr/sbin/chkconfig could fix
this issue.
[YOCTO #5152]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Poky distro codename info added to /etc/lsb-release file.
lsb_release script will not complain anymore about
the incompleteness of /etc/lsb-release file by
returning an error code.
Increases LSB compliance.
Partial fix for [YOCTO #4071].
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Because package lsbsetup is dropped, move the links created for LSB test
to package lsb.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define
any options and furthermore allows 'echo -e' to be the default behavior.
This means that in dash 'echo -e' will actually print '-e' and interpret
backslashes by default. We use instead 'printf' builtin command with or
without '\n' to simulate 'echo -e' or 'echo -n'.
'printf' needs format while 'echo' can be used without any arguments. So
'echo >' was replaced by 'printf "" >'.
'echo' without '-n' flag adds a new line by default so to keep the same
behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is
used.
[YOCTO #3138]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update package lsb version to be same with current lsb test suit
version. Because when install the suit, it warns that need lsb
version >= 3.0 at least.
Drop the duplicated creating files under /etc/lsb-release.d.
Provides directories /etc/opt and /var/opt that they are required by
package lsb-dist-checker in lsb test suit.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|