Age | Commit message (Collapse) | Author |
|
It fails to compile pseudo-native on centos 7:
| ports/linux/pseudo_wrappers.c: In function ‘prctl’:
| ports/linux/pseudo_wrappers.c:129:14: error: ‘SECCOMP_SET_MODE_FILTER’ undeclared (first use in this function)
| if (cmd == SECCOMP_SET_MODE_FILTER) {
| ^
Add macro guard for the definition to avoid the failure.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is needed by new python3-numpy.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is needed for python3-cython, which is needed by new python3-numpy.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
racefix.patch was merged to perl-cross
determinism.patch was partially merged to perl-cross
0001-tests-adjust-to-correctly-exclude-unbuilt-extensions.patch
is no longer needed as issue is addressed upstream.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
CVE: CVE-2020-8492
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
we have offcially dropped python2, so it is possible
that our code run on python3 only host, so change
shebang to python3 to avoid error like:
python: command not found
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
we have offcially dropped python2, so it is possible
that our code run on python3 only host, so change
shebang to python3 to avoid error like:
python: command not found
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
we have offcially dropped python2, so it is possible
that our code run on python3 only host, so change
shebang to python3 to avoid error like:
python: command not found
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
some architectures e.g. mips complain in linking apps which have shared
libs that are linking with libiberty.a fixes errors like below
libiberty/../../libiberty/hashtab.c:285:(.text+0xf8): relocation R_MIPS_26 against `htab_create_typed_alloc' cannot be used when making a shared object; recompile with -fPIC
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes configure time tests to ensure static-libstdc++ is enabled when
using clang
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OE uses libiberty from binutils, since its properly compiled as pic
archive and applications and other libraries needing libiberty can
properly link with it.
With this option applied, explicit delete of libiberty headers and
libraries is not required in install step, since they wont get installed
in first place.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
go compiler is including go/src/cmd modules in -dev package which is in
conflict with go-runtime-dev which provides exact same copy of this
module along with other runtime modules, as a result when both go-dev and
go-runtime-dev are included in image then it results in rootfs failures,
here lets make go depend on go-runtime and dont install the cmd module
here explicitly.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
run-postinsts is only expected to run once, but during startup, but if
any dependency is pulled into a transaction, even once it has been
marked disabled, then it can be restarted.
This leads to occasional failures during QA if an ssh session starts
whilst the existing transaction is still running:
Finished Run pending postinsts.
run-postinsts.service: Succeeded.
Condition check resulted in Commit a transient machine-id on disk being skipped.
Condition check resulted in Bind mount volatile /srv being skipped.
Condition check resulted in Bind mount volatile /var/spool being skipped.
Condition check resulted in Bind mount volatile /var/lib being skipped.
Condition check resulted in Bind mount volatile /var/cache being skipped.
Condition check resulted in Platform Persistent Storage Archival being skipped.
Condition check resulted in Rebuild Hardware Database being skipped.
Starting Run pending postinsts...
Condition check resulted in Kernel Configuration File System being skipped.
Condition check resulted in FUSE Control File System being skipped.
Condition check resulted in Load Kernel Modules being skipped.
Condition check resulted in File System Check on Root Device being skipped.
Condition check resulted in Huge Pages File System being skipped.
Condition check resulted in Journal Audit Socket being skipped.
dropbear@125-192.168.7.2:22-192.168.7.1:44226.service: Succeeded.
Condition check resulted in Platform Persistent Storage Archival being skipped.
Started SSH Per-Connection Server (192.168.7.1:44226).
dropbear@124-192.168.7.2:22-192.168.7.1:44224.service: Succeeded.
Started SSH Per-Connection Server (192.168.7.1:44224).
Condition check resulted in Commit a transient machine-id on disk being skipped.
Condition check resulted in Bind mount volatile /srv being skipped.
Condition check resulted in Bind mount volatile /var/spool being skipped.
Condition check resulted in Bind mount volatile /var/lib being skipped.
Condition check resulted in Bind mount volatile /var/cache being skipped.
Condition check resulted in Platform Persistent Storage Archival being skipped.
Condition check resulted in Rebuild Hardware Database being skipped.
Failed to start Run pending postinsts.
run-postinsts.service: Failed with result 'start-limit-hit'.
run-postinsts.service: Start request repeated too quickly.
Setting RemainAfterExit ensures that the unit remains active and is not
gratuitously restarted, unless done so explicitly using systemctl
restart.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Wang Mingyu <wangmy@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Wang Mingyu <wangmy@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The pathlib module is for Object-oriented filesystem paths
It also provides a lot of handy utilities for checking on
paths. This seems to justify adding it to the core package
along side os, sys, and the other *path libraries.
[YOCTO #13670]
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
coroutines in ruby 2.7+ needs ucontext APIs which are not available in
musl but an external library is available to provide them so use it
Use cached values for ac_cv_func_isnan and ac_cv_func_isinf this is not
detected correctly by configure on musl
on ARM drop using old arm32 implementation of coroutine which is slow and
inefficient
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jeremy A. Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With --force-overwrite (implied by --force-all), dpkg will not abort
when a package overwrites files from different packages. As this can
also lead to "The following package disappeared from your system as
all files have been overwritten by other packages: <package>" and
subsequently broken dependencies, this makes the simple case of
conflicting files hard to debug.
Instead of finding all possibly required force options, only disable
overwrite for now.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a file does not exist, either because it has been removed outside
bitbake, or because only some of the files have been moved to a
different location, delete it from the pseudo-db is the user decides to
fix the database.
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Pseudo changes the syscall access patterns which makes it incompatible with
seccomp. Therefore intercept the seccomp syscall and alter it, pretending that
seccomp was setup when in fact we do nothing. If we error as unsupported,
utilities like file will exit with errors so we can't just disable it.
This works around issues on platforms where seccomp is enabled in file
(e.g. archlinux).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Deleting sources is a rough way of dealing with disabling components,
using configure option is elegant way and we also keep the sources
unchanged, this should not cause any funcitonal changes otherwise
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The alternative ld.so patch is set up so the linker will search
the nativesdk sysroot before searching the host filesystem.
However the patch concatenates <sysroot>/etc and /etc/ld.so.conf
leading to a path that does not exist:
3061991 openat(AT_FDCWD, "/buildtools/sysroots/x86_64-pokysdk-linux/etc/etc/ld.so.conf",
O_RDONLY) = -1 ENOENT (No such file or directory)
In native-nspr, the build uses -lpthread, which triggers a search for librt, but because
of the above it drags in the system librt leading to errors as follows:
/buildtools/sysroots/x86_64-pokysdk-linux/usr/lib/gcc/x86_64-pokysdk-linux/
9.3.0/../../../../x86_64-pokysdk-linux/bin/ld: /lib64/librt.so.1:
undefined reference to `__clock_getcpuclockid@GLIBC_PRIVATE'
update concatenation to correctly construct the path to the nativesdk ld.so.conf
[YOCTO #13853]
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There appears to be no need for the use of REALPV in the recipe for
cdrtools-native as the downloaded tarball has the official version in
it.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using gnu_hash style is unsupported on gold for now therefore disable
building gold on mips/glibc
Certain applications poke for presence of gold linker and silently use
it (webkit), therefore its best to disable building it
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
pseudo-native is special in that bitbake ends up executing it from the
sysroot-components directory before we have any workdirs for the bitbake
fakeroot worker. Since we switched to dynamically linking sqlite, it
means sqlite from the host system may be found, we really want the version
in sysroot-components. Trying to run tasks to create some special environment
for pseudo is hard and error prone. The simplest fix is to add an RPATH to
the binary so that it can correctly find the sqlite we want.
Unfortunately passing $ORIGIN into make doesn't work so well with shell
quoting so we have to fix that during do_install.
[YOCTO #13814]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The original patch "bpo-36852: proper detection of mips architecture
for soft float" uses AC_CANONICAL_TARGET to determine the platform
triplet. While AC_CANONICAL_TARGET exports i686 as target_cpu, gcc
is using i386 instead. We fall back here to i386, as it is conform
to the previous behavior.
Upstream Status: Submitted [https://github.com/python/cpython/pull/13196]
Signed-off-by: Matthias Schoepfer <matthias.schoepfer@ithinx.io>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Header missing and configure script detect this.
Add check before include header (if_alg.h).
Signed-off-by: Oleksiy Obitotskyy <oobitots@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add missing leading spaces or replace += usage with a leading space.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libtool patch will result in configure file regeneration, instead of
doing that at build time, do it in patch itself, this avoids running
autoconf before configure step.
Since binutils needs specific version of autoconf ( which is 2.69 )
this will break on systems using newer or older verisons of autoconf
in current state.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On a system with selinux turned on, trying to access a directory
that is in a tree that doesn't exist returns the error permission
denined rather then no such file or directory, which causes git
to die.
git clone git://git.yoctoproject.org/poky
Cloning into 'poky'...
fatal: unable to access '/opt/poky/3.0+snapshot/sysroots/x86_64-pokysdk-linux/etc/gitconfig': Permission denied
Switch to using the system gitconfig of the host.
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OE's packaging functions assume that the opkg-utils python scipts are
always provided by opkg-utils-native, so the scripts should be removed
for class-target only.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the SRC_URI is switched to be git based, QEMU will automatically update
itself at compile time for select git submodules. This by passes the
bitbake git fetcher. These modules are always present in the release
tarballs, so only are problematic when used with git based SRC_URIs.
These switches will have no effect on a tarball based SRC_URI.
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
fix CVE-2020-7211 for qemu slirp submodule
see :
https://www.openwall.com/lists/oss-security/2020/01/17/2
https://gitlab.freedesktop.org/slirp/libslirp/commit/14ec36e107a8c9af7d0a80c3571fe39b291ff1d4
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Add PACKAGECONFIG option for xkbcommon
qemu-keymap.c:16:10: fatal error: xkbcommon/xkbcommon.h: No such file or directory
* Add PACKAGECONFIG option and patch for libudev
commands-posix.c:53:10: fatal error: libudev.h: No such file or directory
* Add PACKAGECONFIG option for libxml2
util/osdep.c:136: undefined reference to `fcntl64'
- Without specifying libxml2, configure searches the system and pulls in the system
libxml2 if it is present. In the process it adds -L/usr/lib64 which causes the
system libc to be linked instead of the one from the extended tarball.
None of the above libraries appear to be included in the depends for any of the qemu
builds, so if they are getting linked in, its probably not intentionally.
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This should help gcc detect and use target ISA on x86_64 machines when
-march is not used on cmdline
[YOCTO #139]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In some cases, we run into parallel build failures where BUILT_SOURCES
is skipped, as a result required header files are not generated and the
build fails with missing header errors like
../bison-3.5.2/lib/uniwidth/width.c:21:10: fatal error: uniwidth.h: No such file or directory
#include "uniwidth.h"
^~~~~~~~~~~~
compilation terminated.
BUILT_SOURCES should be built automatically with `make all` [1] therefore
ensure that make is invoked with `all` target
bison-native parallel build fails when -l<n> is passed globally from
build environment, errors like below due to race starts to show up
Therefore removes a previous load limit if set
[1] https://www.gnu.org/software/automake/manual/html_node/Built-Sources-Example.html#Built-Sources-Example
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bugfix release [1]
[1] https://lists.gnu.org/archive/html/bison-announce/2020-03/msg00000.html
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Domarys Correa <domarys.correa@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
THE LICENSE checksum changed in this update due to copyright notice
added for 2020.
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|