| Age | Commit message (Collapse) | Author |
|---|
|
When image feature "debug-tweaks" enabled, save output of postinstall
scripts to log file /var/log/postinstall.log when image first boot. And the
log file can be configured.
It also needs image feature "package-management" enabled. If not,
package run-postinsts will be installed and then all packages will be
configured by it. Command 'opkg configure' outputs nothing.
[YOCTO #3223]
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Tested qemu on x86-64 target and qemu-native
no obvious problems seen in testing
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
bb files: remove invalid config.sub/config.guess files (autotools will
generate the correct files)
allocate-larger-memory.patch: not needed anymore
fix-gcc-4.6-null-not-defined.patch: added
- include header that defines NULL
includes-fix.patch: not needed anymore
localefixes.patch: removed
- not necessary anymore (no compiling errors)
makerace.patch: adapted to the new version
no-ko-translation.patch: adapted to the new version
no-nls-dpkg.patch: added
- fix build without nls
noconfigure.patch: adapted to the new version
nodoc.patch: adapted to the new version (apply patch on all cases
because the doc generation needs docbook-xsl)
remove-redeclaration.patch: not needed anymore
truncate-filename.patch: moved
use-host.patch: adapted to the new version
no-curl.patch: adapted to the new version
disable-configure-in-makefile.patch: added
- do not run configure at do_compile
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
There are various usages of ALLOW_EMPTY with no packages specified. This
is not recommended syntax, nor is it likely to be supported in the future.
This patch improves the references in OE-Core, either removing them if they're
pointless (e.g. when PACKAGES="") or specifying which package it applies to.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Reference:http://bugs.python.org/issue14579
The utf-16 decoder in Python 3.1 through 3.3 does not update the
aligned_end variable after calling the unicode_decode_call_errorhandler
function, which allows remote attackers to obtain sensitive information
(process memory) or cause a denial of service (memory corruption and crash)
via unspecified vectors.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-2135
[YOCTO #3450]
Signed-off-by: yanjun.zhu <yanjun.zhu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When you using a qemuppc target and sstate you might end up with
the problem:
qemu-system-ppc: error while loading shared libraries:
libfdt.so.1: cannot open shared object file: No such file or directory
The way you can force this to happen assuming you are using sstate is
as follows:
bitbake dtc-native
bitbake -c cleansstate qemu-native
bitbake qemu-native
bitbake -c clean dtc-native
Now go start qemu and it will fail. The solution is to always build
the dtc libraries since they are used and needed by the qemuppc
simulator.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
1, Use create_wrapper to create perl wrapper in the SDK.
2, Add perl.real to perl-nativesdk package.
[YOCTO #3338]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
pseudo 1.5's enable-force-async works great, unless you use a host
where, inexplicably, stat(2) reports inconsistent and changing values
for a file's size or times for some time unless a file has been fsynced,
in which case you might want a way to cause an fsync to work.
Also noticed that some recent changes never made it into the docs, so
I did a little cleanup there. And changed the way NDEBUG suppresses
pseudo's debug messages, so arguments to them with possible side
effects (like calls into functions in another translation unit) can be
omitted, which should drastically reduce computational time if anyone
ever uses NDEBUG.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Move run-postinsts scripts from rootfs_rpm.bbclass to rpm recipe. That
is the same way for dpkg and opkg to deal the post install scripts.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Upstream changed numbering to remove '-', so
extend PV to patch.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We have 2.23.1 as default now.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
[Yocto #3943]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The argparse module uses the textwrapper modules contained in
python-textutils.
Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to generate new disk images for ext(2,3,4) which contain root
file systems we do not want to rely on the host's genext2fs which may
have different arguments and features, so allow the nativesdk
genext2fs binary to be built.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The pseudo 1.5 update is a moderately experimental set of changes
which ought to improve performance. With these changes, pseudo
uses an in-memory sqlite database which is lushed on exit,
the protocol is changed to reduce waiting for server responses,
and pseudo can suppress any and all fsync/fdatasync type operations.
This last feature is optional, and not on by default, so we need
to pass in an extra configure argument, but that argument wouldn't
be known to an older configure, so... Enter PSEUDO_EXTRA_OPTS which
is passed to configure, and which pseudo_1.5.bb sets by default to
"--enable-force-async". (I haven't added it in pseudo_git.bb, but
maybe it should be changed; I'm not quite as sure there.)
The justification for these changes is that, for most of the real-world
build cases I deal with, they produce a 25% or more reduction in the
build time of a project. This increases when a system is heavily
loaded.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The 'make update' was using wget to get the gmo and other gnu files from
upstream, since need to work cleanly in a non-networked or proxy environment
this does not so well. Remove the list of languages from the LINGUAS file.
[YOCTO #3745]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We were seeing errors like:
| autoreconf: running: /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly/build/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf --force
| configure.ac:27: error: possibly undefined macro: AS_IF
| If this token and others are legitimate, please use m4_pattern_allow.
| See the Autoconf documentation.
| configure.ac:100: error: possibly undefined macro: AC_MSG_ERROR
| autoreconf: /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly/build/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf failed with exit status: 1
| ERROR: autoreconf execution failed.
which turns out to mean the pkgconfig macros were unavailable (thanks for clear
error messages autoconf).
This patch adds in the missing dependency.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Modify the include file and script to generate a missing RDEPENDS.
Install python on target with python-io. Import ssl:
Python 2.7.3 (default, Feb 9 2013, 16:04:35)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import ssl
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/ssl.py", line 58, in <module>
ImportError: No module named textwrap
Installing python-textutils solves the issue.
Signed-off-by: MiLo <milo-software@users.sourceforge.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 1.4.4 fix replaced possible double-prepending of chroot paths
with possible non-prepending of chroot paths. After significant
evaluation, have settled on a single prepending of the chroot
path as a workable compromise.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The pseudo 1.4.2 linkat() implementation had a broken edge case
in which you could end up with chroot paths being doubled when
using plain link() calls instead of linkat() calls.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you never use sstate and always build everything from scratch you
will never see this problem. However, if you use sstate and build
directories that last a long time eventually you can end up with the
scenario where libtool gets a hard coded path in it for sed, and sed
may not exist. The reason you don't see this problem to often if you
generally build from scratch is that libtool builds before sed and
will pickup the host's /bin/sed.
The way to reproduce the issue is:
bitbake some_image
bitbake -c cleansstate libtool-native
bitbake sed-native
bitbake libtool-native
bitbake -c clean sed-native
bitbake ANY_PACKAGE_THAT_USES_LIBTOOL_NATIVE
In my case I used modphp, which doesn't exist in the oe-core. You will
end up with a strange looking error like:
| make[1]: *** [buckets/apr_buckets_alloc.lo] Error 1
| /opt/build/bitbake_build/tmp/sysroots/x86_64-linux/usr/bin/x86_64-linux-libtool: line 981: /opt/build/bitbake_build/tmp/sysroots/x86_64-linux//bin/sed: No such file or directory
The solution is to always use /bin/sed for libtool-native.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Apt does not recognize the architecture if a different one is set with
DPKG_ARCH (e.g. armel). This patch writes the correct architecture to
/etc/apt/apt.conf.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@netmodule.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of a python backtrace, tell the user they need to install PyYAML
if they wish to use the --yaml output options.
Fixes [YOCTO #3768].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
See: http://savannah.gnu.org/bugs/?30653
This only shows up for projects which have a number of intermediate
targets. For me, systemd fails to build without this patch, and does
build consistently with it.
WebKitGtk+ is another known affected project.
Signed-off-by: Colin Walters <walters@verbum.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* sometimes it's autodetected and fails to build:
| /usr/bin/ld: libcacard/.libs/cac.o: Relocations in generic ELF (EM:40)
| libcacard/.libs/cac.o: could not read symbols: File in wrong format
| collect2: ld returned 1 exit status
| make[1]: *** [libcacard.la] Error 1
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This updates to pseudo 1.4.3. Changes:
1. A couple of minor tweaks to reduce difficulties using SDKs built
on slightly more recent machines on older machines; specifically,
avoiding getting @GLIBC_2.7 symbol references for sscanf(), fscanf(),
and open2().
2. Revision of the logic determining the library directory to use for
sqlite's library files.
The latter is a source of difficulty because it's come up a few times
that we may want pseudo to use lib64 for libpseudo.so, but bitbake's
usual setup would have libsqlite3.a in lib regardless of bit width.
Cleaned up previous design a bit by providing a distinct setting for
sqlite-lib, which defaults to the same library directory used for other
things. Adjusted build to use this new setting. (This ends up being
${baselib}; on targets, that might not be lib, but for native builds
it generally is, and for SDK builds it appears to do the right thing.)
Testing: Successful build of meta-toolchain for both 64-bit and 32-bit
SDKMACHINE, and builds with NO32LIBS = "0" also succeeded. Also builds
for multilib targets.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We need the files to be tracked by sstate so we need to jump through
some hoops to ensure this happens. The cross bindir directory
isn't staged automatically so we need to handle this outselves.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since /var/cache is not in volatiles anymore, this entry has to go.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This will just install a wrapper script in STAGING_BINDIR_CROSS that
will execute the proper qemu user binary for the current target.
[YOCTO #2599]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* it's not recommended to change this value, because it breaks upgrade path on target
(all old u-a alternatives are forgot in old OPKGLIBDIR value
* but make it consistent, so if someone really want to change that, then
setting OPKGLIBDIR_distro in distro.conf would be enough
* without this there were at least 4 places to change:
rootfs_ipk: opkglibdir variable (notice that I've removed /opkg from it to correspond
with EXTRA_OECONF option used in opkg recipes
package_ipk: ${target_rootfs}${localstatedir}/lib/opkg/ hardcoded in
package_install_internal_ipk
opkg-collateral: value in lists file
opkg: EXTRA_OECONF for all 3 classes, FILES_libopkg, do_install
* validated with buildhistory that without OPKGLIBDIR explicitly set the
output is the same and that after setting
OPKGLIBDIR_forcevariable := "${libdir}"
everything including empty directory from package_ipk is moved to
libdir
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Fixes errors when building SDK for multilibbed enabled
architectures.
[YOCTO #3832]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- use ${libdir} instead of ${exec_prefix}/lib
Fix the following warning:
WARNING: QA Issue: gcc: Files/directories were installed but not shipped
/usr/lib64/libiberty.a
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix the following warning:
WARNING: QA Issue: lib32-run-postinsts: Files/directories were installed but not shipped
/usr/share/lib32-run-postinsts
/usr/share/lib32-run-postinsts/run-postinsts.awk
[YOCTO #3438]
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix the following warning:
WARNING: QA Issue: lib32-syslinux: Files/directories were installed but not shipped
/usr/lib
/usr/share/syslinux
/usr/share/syslinux/com32
/usr/share/syslinux/com32/libcom32gpl.a
/usr/share/syslinux/com32/libcom32.a
...
[YOCTO #3438]
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix the following warning:
WARNING: QA Issue: lib32-sgml-common: Files/directories were installed but not shipped
/etc
/etc/sgml
/etc/sgml/sgml.conf
/usr/bin
/usr/bin/install-catalog
/usr/bin/sgmlwhich
[YOCTO #3438]
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Set the RDEPENDS on the specific package that has the dependency and stop it
being applied to for example ${PN}-doc (and others).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Set the RDEPENDS on the specific package that has the dependency and stop it
being applied to for example ${PN}-doc (and others).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
configure touches pkg-config for various tests so we need the DEPENDS
which we can gain from the class inherit
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
git-core provides the following routines (among others): git-sh-setup,
cd_to_toplevel, die, and more. But it is not always in the same location
relative to the guilt binary if git is not part of a 'host tools'
sysroot. Modern git versions don't need this, so commenting it out (until it
breaks again) is the solution to the problem of it not existing, and the
library routines will sourced and provided by git itself.
Since bitbake.conf has git-native as ASSUME_PROVIDED, this means that
when the system git binary is used, errors such as this can be seen in
failed patch logs:
| /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/guilt: line 29: /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/../libexec/git-core/git-sh-setup: No such file or directory
| /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/guilt: line 717: cd_to_toplevel: command not found
| error: patch failed: Makefile:2
| error: Makefile: patch does not apply
| /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/guilt-push: line 137: die: command not found
| [ERROR] unable to complete push
| pending patches are:
| /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/guilt: line 29: /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/../libexec/git-core/git-sh-setup: No such file or directory
| /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/guilt: line 29: /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/../libexec/git-core/git-sh-setup: No such file or directory
| links/linux-yocto-custom/0001-linux-version-tweak.patch
| ERROR. could not update git tree
With the export removed, we have a normal "clean" failure message when
the sysroot or system git is used.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
Kang Kai
Bogdan Marinescu
Khem Raj
Constantin Musca
Richard Purdie
Matthew McClintock
Emilia Ciobanu
yanjun.zhu
Jason Wessel
Hongxu Jia
Peter Seebach
Saul Wold
Andrei Dinu
Michael Thalmeier
Otavio Salvador
MiLo
Stefan Eichenberger
Paul Eggleton
Colin Walters
Martin Jansa
Laurentiu Palcu
Marko Lindqvist
Bruce Ashfield