| Age | Commit message (Collapse) | Author |
|---|
|
These DEPENDS are now identical and the native/nativesdk variants can
be dropped in favour of letting PACKAGECONFIG sort it out.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the configuration for sdl and glx, the virtual/libx11 in DEPENDS
no longer makes any sense at all, the dependency comes through the
various graphics backends. Therefore drop it. The glx PACKAGECONFIG
is added for completeness. We avoid a floating dependency on mesa.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Converting this dependency to become a PACKAGECONFIG makes sense. Since
there is a "," in the configuration option, its not quite as straightforward
as normal.
Also clean up the native and nativesdk DEPENDS and set the PACKAGECONFIG
entries to match the old behaviour by default.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
SDL is now controlled by PACKAGECONFIG, remove the DEPENDS remnant
set PACKAGECONFIG accordingly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Converting this dependency to become a PACKAGECONFIG makes sense.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
QEMU 2.1 comes with fixes and improvements.
See http://wiki.qemu.org/ChangeLog/2.1 for details.
- Added config for quorum support, depending on gnutls.
- pcie_better_hotplug_support.patch removed,
integrated upstream.
- Qemu-Arm-versatilepb-Add-memory-size-checking.patch updated
to 2.1 source code.
- no-strip.patch removed, no longer necessary due to code changes.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if pkg-config isn't installed on the build system, this code
can cause an error. We don't need to require this, only use it if its
present so allow the test to fail gracefully.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
some syscalls are obsolete and no longer available for EABI, exclude them to
fix the below error:
In file included from qemu-seccomp.c:16:0:
qemu-seccomp.c:28:7: error: '__NR_select' undeclared here (not in a function)
{ SCMP_SYS(select), 252 },
^
qemu-seccomp.c:36:7: error: '__NR_mmap' undeclared here (not in a function)
{ SCMP_SYS(mmap), 247 },
^
qemu-seccomp.c:57:7: error: '__NR_getrlimit' undeclared here (not in a function)
{ SCMP_SYS(getrlimit), 245 },
^
qemu-seccomp.c:96:7: error: '__NR_time' undeclared here (not in a function)
{ SCMP_SYS(time), 245 },
^
qemu-seccomp.c:185:7: error: '__NR_alarm' undeclared here (not in a function)
{ SCMP_SYS(alarm), 241 },
please refer source files:
arch/arm/include/uapi/asm/unistd.h
or kernel header:
/usr/include/asm/unistd.h
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
For qemu-native, the pkg-config paths do not
include build host paths.
This is an issue for libsdl for example, where SDL is
used by qemu, but for qemu-native libsdl-native is not
built, but assumed to be provided by the build host.
Because pkg-config do not search for libsdl config files
on the build host sysroot, the configure stage of qemu-native
will fail because it will not find SDL as being installed.
Usually, the isssue is masked by a functional sdl-config that
will be interogated instead of pkg-config. However, on Build
Appliance, sdl-config is deliberately made non-functional,
so the issue manifests itself.
The fix will create an extended PKG_CONFIG_PATH, which does
include the build host sysroot paths for pkg-config.
Fix for [YOCTO #6495].
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemu configure will search for libssh2 if we do not enable or
disable it's use, resulting in non-deterministic builds. We
define PACKAGECONFIG[] to avoid this.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch goes through the OE-Core recipes and marks those which use autotools
but don't support a separate build directory (${S} != ${B}). A new class,
autotools-brokensep is used for this purpose.
This doesn't introduce any change in behaviour in its own right.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To enable the construction of minimal hypervisors based on OE, it is
important to be able to build qemu without it requiring X support. By
checking that the distro is built with the x11 feature before adding
virtual/x11 to the dependencies, this is made possible.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
linux-user-Handle-SOCK_CLOEXEC-NONBLOCK-if-unavailab.patch
file no longer needed, included in upstream.
qemu-native tested on all architectures,
host machine is Ubuntu Linux 13.10 x86-64.
Basic X11 and networking tests performed.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Currently the SDL configuration option for qemu floats. This is confusing to new users
and makes the build non-determinstic. This patch adds a PACKAGECONFIG option, defaulting
to off and adds documentation to local.conf.sample leaving it on by default since this
is the configuration our quick start assumes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
| Note: adding Smart RPM DB channel
|
| Note: to be installed: qemu@x86_64 run-postinsts@x86_64 kernel-modules@qemux86_64 packagegroup-core-boot@qemux86_64
| Loading cache...
| Updating cache... ######################################## [100%]
|
| Computing transaction...error: Can't install qemu-1.5.0-r0.0@x86_64: no package provides /usr/bin/python
|
| Saving cache...
|
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_rootfs (log file is located at tmp/work/qemux86_64-wrs-linux/wrlinux-image-glibc-small/1.0-r1/temp/do_rootfs/log.do_rootfs.21373)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use PACKAGECONFIG to explicitly address vnc, libcurl, nss, uuid, curses, gtk+,
libcap-ng dependencies rather than tested by configure.
It avoided potential errors while multiple builds shared a common state_cache.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't make use of xen and when building on Ubuntu 13.04 when
libxen-dev is installed on the build host you will get errors like the
following:
| /usr/include/x86_64-linux-gnu/bits/string3.h:81: warning: memset used with constant zero length parameter; this could be due to transposed parameters
| /usr/lib/gcc/x86_64-linux-gnu/4.7/../../../../lib/libxenguest.so: undefined reference to `lzma_alone_decoder@XZ_5.0'
| /usr/lib/gcc/x86_64-linux-gnu/4.7/../../../../lib/libxenguest.so: undefined reference to `lzma_code@XZ_5.0'
| /usr/lib/gcc/x86_64-linux-gnu/4.7/../../../../lib/libxenguest.so: undefined reference to `lzma_stream_decoder@XZ_5.0'
| /usr/lib/gcc/x86_64-linux-gnu/4.7/../../../../lib/libxenguest.so: undefined reference to `lzma_end@XZ_5.0'
This change disables xen for both -native and target packages but
since it is a PACKAGECONFIG a user could tune this to have xen support
in the target package.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
To avoid a implicit build result.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This update also drops the following patches which appear to have
been resolved upstream:
- ftd_header.patch
- target-i386-Fix-aflag-logic-for-CODE64-and-the-0x67-.patch
- target-ppc_fix_bit_extraction.patch
Qemu no longer uses the i386.ld and x86_64.ld linker scripts
and the .interp section should now have a 0x1000 size with the
proper path. Therefore, for nativesdk-qemu, the following
patch should no longer be required and is also dropped:
- relocatable_sdk.patch
Signed-off-by: Chris Patterson <cjp256@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When the mouse pointer enters the qemu window it takes a pointer grab. This
doesn't sound too dangerous at first but it turns out that SDL will infinitely
busy-loop if it can't get the grab (e.g. if the screen is locked) and the
average autobuilder setup's X server will have locked the screen a few minutes
after boot.
The result is that on many autobuilders apparently random qemu instances (the
top-most one under the pointer) will hang during boot.
To resolve this add an option (via an environment variable) to never attempt a
grab. The default behaviour remains to grab so that everyone else doesn't see
any change.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We should not skip it always since same recipes provide
qemu-native too so user class-target override to make it
only skip for target recipes
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OE carries a patch to pass CFLAGS to qemu. However, we can avoid
patching by passing CFLAGS with qemu's --extra-cflags option.
Tested that building qemu-native still works without zlib-dev
on host, and that qemu builds.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
QEMU uses the environment variable LIBTOOL by default. We want to ensure
we set it to the proper libtool version, instead of letting it default to
the host system version.
This corrects target building, and ensures we're linking properly for
native and nativesdk versions.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Move to using the PACKAGECONFIG mechanism to select configure options
and dependencies. Without this the system will attempt to discover
various dependencies, and sometimes does so incorrectly.
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Patches removed:
0001-doc-Fix-texinfo-table-markup-in-qemu-options.hx.patch
- applied
0002-docs-Fix-generating-qemu-doc.html-with-texinfo-5.patch
- fixed different upstream
Revert-vmware_vga-Add-back-some-info-in-local-state-.patch
- fixed different upstream
arm-bgr.patch
- this should be also fixed upstream, if still issue please resend.
fallback-to-safe-mmap_min_addr.patch
- this should be also fixed upstream, if still issue please resend.
linker-flags.patch
- unneeded with makefile changes
from configure the obsolete --audio-cards-list option has been removed.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
0001-doc-Fix-texinfo-table-markup-in-qemu-options.hx.patch and 3f08ffb4a4741d147634761dc053ed386243a0de.patch were backported in 1.4.1
Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enables qemu to run images with video output without the need for vncviewer.
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes failures in builds where qemu fails with:
i586-poky-linux/qemu/1.4.0-r0/qemu-1.4.0/hw/arm/../../device_tree.c:28:20: fatal error: libfdt.h: No such file or directory
x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.7.2/ld: cannot find -lfdt
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1, When build qemu-native on SLED 11.2, there is an error:
...
| In file included from /usr/include/bits/sigcontext.h:28,
| from /usr/include/signal.h:339,
| from /buildarea2/tmp/work/i686-linux/qemu-native/1.4.0-r0/
qemu-1.4.0/include/qemu-common.h:42,
| from fsdev/virtfs-proxy-helper.c:23:
| /usr/include/asm/sigcontext.h:28: error: expected specifier-
qualifier-list before '__u64'
| /usr/include/asm/sigcontext.h:191: error: expected specifier-
qualifier-list before '__u64'
...
2, The virtfs-proxy-helper.c includes <sys/capability.h> and
qemu-common.h in sequence. The header include map is:
(`-->' presents `include')
...
"virtfs-proxy-helper.c" --> <sys/capability.h>
...
"virtfs-proxy-helper.c" --> "qemu-common.h" --> <signal.h> -->
<bits/sigcontext.h> --> <asm/sigcontext.h> --> <linux/types.h> -->
<asm/types.h> --> <asm-generic/types.h> --> <asm-generic/int-ll64.h>
...
3, The bug is found on SLED 11.2 x86. In libcap header file
/usr/include/sys/capability.h, it does evil stuff like this:
...
25 /*
26 * Make sure we can be included from userland by preventing
27 * capability.h from including other kernel headers
28 */
29 #define _LINUX_TYPES_H
30 #define _LINUX_FS_H
31 #define __LINUX_COMPILER_H
32 #define __user
33
34 typedef unsigned int __u32;
35 typedef __u32 __le32;
...
This completely prevents including /usr/include/linux/types.h.
The above `<asm/sigcontext.h> --> <linux/types.h>' is prevented,
and '__u64' is defined in <asm-generic/int-ll64.h>.
4, Modify virtfs-proxy-helper.c to include <sys/capability.h>
last to workaround the issue.
http://www.linuxtv.org/pipermail/vdr/2009-August/021194.html
http://patchwork.linuxtv.org/patch/12748/
[YOCTO #4001]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Tested qemu on x86-64 target and qemu-native
no obvious problems seen in testing
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When you using a qemuppc target and sstate you might end up with
the problem:
qemu-system-ppc: error while loading shared libraries:
libfdt.so.1: cannot open shared object file: No such file or directory
The way you can force this to happen assuming you are using sstate is
as follows:
bitbake dtc-native
bitbake -c cleansstate qemu-native
bitbake qemu-native
bitbake -c clean dtc-native
Now go start qemu and it will fail. The solution is to always build
the dtc libraries since they are used and needed by the qemuppc
simulator.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* sometimes it's autodetected and fails to build:
| /usr/bin/ld: libcacard/.libs/cac.o: Relocations in generic ELF (EM:40)
| libcacard/.libs/cac.o: could not read symbols: File in wrong format
| collect2: ld returned 1 exit status
| make[1]: *** [libcacard.la] Error 1
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Set the RDEPENDS on the specific package that has the dependency and stop it
being applied to for example ${PN}-doc (and others).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
remove-hardcoded-libexec.patch: removed
- included in the new version
qemu-vmware-vga-depth.patch: removed
- doesn't apply anymore
- the problem addressed by the patch is fixed by
reverting commit 1f202568e0553b416483e5993f1bde219c22cf72
Revert-vmware_vga-Add-back-some-info-in-local-state-.patch:
- VMware VGA requires that the depth presented to the guest
to be the same as the Display Surface depth in order to do not
corrupt the display
- do not cache the DS depth (the depth might change)
- revert commit 1f202568
- QEMU now uses pixman (DEPENDS += "pixman")
- rearrange the recipe in order to mimic the bitbake flow
- update both variants (.tar.bz2, git)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This address the following when libexecdir is not set to /usr/libexec
WARNING: QA Issue: qemu: Files/directories were installed but not shipped
/usr/libexec
/usr/libexec/qemu-bridge-helper
/usr/libexec/.debug
/usr/libexec/.debug/qemu-bridge-helper
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
As discussed on the mailing lists, using a suffix to package names is
hard and has lead to many recipes having to do PKGSUFFIX games. Its
looking extremely hard to scale nativesdk much further without hacking
many recipes.
By comparison, using a prefix like multilib does works much better and
doesn't involve "hacking" as many recipes. This change converts nativesdk
to use a prefix using the existing multilib infrastructure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These patches are a maintenance nightmare and impacting our abaility to
keep up to date with qemu. They are also a source of various bugs.
Remove them until someone is willing to step up and maintain them,
or upstream gains GL support.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We had added the --disable-curl to EXTRA_OECONF, but there is an
EXTRA_OECONF_virtclass-nativesdk += "foo", the
"EXTRA_OECONF_virtclass-nativesdk +=" equals to
"EXTRA_OECONF_virtclass-nativesdk =" (the "+" has no effect here), so we
should add the "--disable-curl" to EXTRA_OECONF_virtclass-nativesdk.
And change the "+=" to "=" to not confuse people.
[YOCTO #2305]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemu.inc: on older kernel build hosts that have < 2.6.20 which
doesn't support kvm yet, build will fail. Add a check in do_configure
to make sure whether linux/kvm.h exists for nativesdk build.
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Default seems to be to enable GL accelaration so when
gl is not specified in PACKAGECONFIG then add the
--disable-gl-accel to really disable it.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
--{en|dis}able-gl-accel is spcefic to gl
patches in 0.15.1 which may not be available
for other qemu's so if someone chooses to remove
gl from PACKAGECONFIG then we dont explicitly
use the --disable-gl-accel option since this
wont be recognised by configure.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Add an PACKAGECONFIG in qemu to disable GL acceleration:
* By default configure try best to enable GL acceleration and fail when missing
host dependency(libSDL and libGL).
* End user can also choose to turn off GL capability, thus remove the host
dependence in building.
[YOCTO #2407] got fixed.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Cristian Iorga
Roy.Li
Joe Slater
Otavio Salvador
Jonas Eriksson
Paul Eggleton
Hongxu Jia
Christopher Larson
Ming Liu
Chris Patterson
Ross Burton
Khem Raj
Riku Voipio
Mark Hatle
Ting Liu
Ionut Radu
Martin Jansa
Mihai Prica
Jason Wessel
Constantin Musca
Robert Yang
Saul Wold
Yao Zhao
Zhai Edwin