| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I took the same approach as the recent perl upgrade: write recipe from scratch,
taking the pieces from the old recipe only when they were proven to be necessary.
The pgo, manifest and ptest features are all preserved.
New features:
- native and target recipes are now unified into one recipe
- check_build_completeness.py runs right after do_compile() and verifies that
all optional modules have been built (a notorious source of regressions)
- a new approach to sysconfig.py and distutils/sysconfig.py returning values
appropriate for native or target builds: we copy the configuration file to a
separate folder, add that folder to sys.path (through environment variable
that differs between native and target builds), and point python to the file
through another environment variable.
There were a few other patches where it was difficult to decide if the patch
is still relevant, and how to test that it works correctly; please add those
as-needed by testing the new python.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
So that wide-char functions are accssible.
[YOCTO #13142]
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When working path contains "clang"/"gcc"/"icc", it might be part of $CC
because of the "--sysroot" parameter. That could cause judgement error
about clang/gcc/icc compilers.
eg: if build under /yocto/builds/xicc/, bitbake python, $CC will contains
xicc, will make $CC match *icc, but actuall xicc just folder name.
When "*icc" is matched, below errors are reported when
compiling python/python3:
x86_64-wrs-linux-gcc: error: strict: No such file or directory
x86_64-wrs-linux-gcc: error: unrecognized command line option '-fp-model'
Here use cc_basename to replace CC for checking compiler to avoid such
kind of issue.
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When building for powerpc 32bit with musl following error triggered
from do_configure:
checking for the platform triplet based on compiler characteristics... powerpc-linux-gnu
configure: error: internal configure error for the platform triplet, please file a bug report
This is caused by PLATFORM_TRIPLET != MULTIARCH mismatch since MULTIARCH
in case of musl is powerpc-linux-musl. Since triplet is used as part
module name as described in PEP-3149 to make fix less intrusive alias
powerpc-linux-musl to powerpc-linux-gnu to avoid possible runtime
(e.g. tests) incompatibilities later.
Fix was inspired by commit cda0ef61d373 ("python3: fix do_configure
check platform triplet error").
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
new manifest
When creating a new python3 manifest, there is a corner case on which
the filepath for a certain dependency that was found, could contain
the path of an existing folder, e.g. ${libdir}/python3/xmlrpclib.py
module path contains ${libdir}/python3/xml, this causes an issue where
the dependency doesnt get eventually added on FILES for that module.
This patch checks if the dependency that was found is a directory, if it
is, it checks if it matches one of the existing directories on the
manifest, if it is not, then it checks if the dependency's path (without
the filename) matches one of the directories.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch altered the clean target's behaviour to skip the ipkg-install
directory. However this directory isn't created by opkg, opkg-utils, or the
package_ipk class; and we don't invoke the clean target as we perform
out-of-tree builds.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While there is a bit of documentation regarding building a new
manifest file for python, it seems that users usually only read
the manifest file.
The manifest file is in JSON format which doesn't allow comments,
hence why instructions were initially put elsewhere.
This patch hacks the call to open the JSON manifest file by using a
marker to trick it into reading only part of the file as the manifest
itself, and keep the other part as comments, which contain instructions
for the user to run the create_manifest task after an upgrade or when
adding a new package.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support to enable tk via PACKAGECONFIG.
before this patch:
# python3
Python 3.5.6 (default, Nov 8 2018, 04:53:45)
[GCC 8.2.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import tkinter
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib64/python3.5/tkinter/__init__.py", line 35, in <module>
import _tkinter # If this fails your Python may not be configured for Tk
ImportError: No module named '_tkinter'
>>>
After this patch, if enable tk in PACKAGECONFIG, then
# python3
Python 3.5.6 (default, Nov 8 2018, 03:15:52)
[GCC 8.2.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import tkinter
>>>
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Pyvenv is just a small script that uses venv to create virtual
environments.
https://www.python.org/dev/peps/pep-0405/#creating-virtual-environments
This patch adds the python3-venv module as a self-contained package which
python3-pyvenv must depend on at run-time.
The patch also provides the package python3-pyvenv from the pyhton3-venv
package.This is good for future-proofing since python3-pyvenv has been
deprecated and only python3-venv is now available in Python 3.6.
https://docs.python.org/3/library/venv.html.
Without this patch python3-pyvenv is broken because it is missing the
venv module at run-time. This patch specifies the newly created
python3-venv as a run-time dependency of python3-pyvenv.
Signed-off-by: Hugues Kamba <hugues.kamba@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Copy the Python 2 run-ptest script to execute the Python 3 test suite.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
sqlite3/__init__.py was accidentally included in python3-misc.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This package doesn't exist anymore so the manifest tool doesn't need to handle
it specially.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently the bulk of the tests in python3-tests, some more in
python3-sqlite3-tests, and others in their parent module (such as
python3-ctypes). This is pointless space usage if we're not planning on running
the tests, so consolidate all the tests into python3-tests.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of sorting the entire manifest when it is updated, use OrderedDict to
preserve the order of fields. This means that packages can be ordered in the
manifest to allow non-trivial FILES assignments (such as a package that picks up
pieces of other packages)
The manifest has been regenerated with the new stable ordering, and
distutils-staticdev moved above distutils so the packaging rules work as
expected.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Due to human error an older revision of the SSL patch was merged.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backport changes from 3.7/3.6 to fix failing python3 ssl test suite.
Fixes [YOCTO #12919]
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
|
|
glibc 2.28 slightly changed the behaviour of sigaddset() which broke
multiprocessing. Backport a patch from Python 3.6 to solve this.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch dates back to the addition of the Python 3 recipe to oe-core, and as
listxattr is never added to supports_follow_symlinks the extended attribute
support will never be enabled.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
None of the Python invocations that this changes are actually called, and
there's no need to provide a HOSTPGEN variable when the recipe can just override
PGEN directly.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With OpenSSL 1.1.x TLS 1.3 can be used, so backport a patch from Python 3.6 to
fix the ftplib unit test.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Python uses AC_RUN_IFELSE to determine the byte order for floats and doubles,
and falls back onto "I don't know" if it can't run code. This results in
crippled floating point numbers in Python, and the regression tests fail.
Instead of running code, take a macro from autoconf-archive which compiles C
with a special double in which has an ASCII representation, and then greps the
binary to identify the format.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There's no need to delete the line that removes the profile data, as we're not
using it after the build. This reduces the size of the patch, making it easier
to maintain.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There was a bug where modules were being added twice to the
core package, this patches the manifest to reflect the fix on
the create_manifest script.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch intends to clean up the whole create_manifest script/task
for python3.
This is an effort to make the code more human friendly and facilitate
adoption, it not only cleans up the code but it also improves comments,
it should also be easier to upgrade the manifest after each python3
upgrade now, with these fixes the transition to python 3.7 should be
seamless.
It fixes a rather harmless bug where module dependencies were being
added twice to the core package and adds tests and sqlite3-tests
as special packages since we want specific dependencies on those.
It also fixes a bug that happened on a few packages that
contained a directory with the same name as the module itself
e.g. asyncio, where the script avoided checking that module for
dependencies.
Lastly, it improves the output, it errors out if a module is found
on more than one package, which is what usually happens when
python upstream introduces a new file, hence why the current
manifest is unaware of, it is better to exit with an error because
otherwise the user wouldnt know if anything went wrong unless the output
of the script was checked manually.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch improves the create_manifest script by making it
use PYTHON_MAJMIN instead of hard coded paths containing the
version number when looking at the necessary modules for
every package, the script should now be independent of the
python(3) version on which were working
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the manifest contains hard coded paths with the version number,
e.g. python3.5, this patch changes the paths to use the variable
PYTHON_MAJMIN instead, this should make the python upgrades easier
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable profile guided optimization (pgo) for python3. Enabling pgo in
python is generally as simple as invoking the target profile-opt which:
- builds python binaries with profile instrumentation enabled,
- runs a specific profile task using that python to get the profile
data and,
- feeds the compiler with this profile data and rebuilds python.
This change invokes qemu-user for the second step of running a profile
task using target python. Depending on how long profile task takes to
run, this might add a significant time to compilation (which would be
true for native builds too). The default profile task can be changed by
the users depending on what makes sense for their use case (or can be
left empty). In case qemu-user isn't supported, profile task won't be run.
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make the tests subpackage depend on all modules as test.regrtest uses most (if
not all) of them.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Redefiine regen-all in Makefile to invoke regen-importlib after
building other regen- targets. Change the recipe to not build it
before regen-all. This avoids trying to build it multiple times,
which can occasionally fail.
Signed-off-by: Joe Slater <joe.slater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Alejandro asked this be reverted as the patch causes more problems
than it solves.
This reverts commit 5d288d286e0adb221649d896c132a607ecddc490.
|
|
Adds a couple of prints to get a nicer log, and creates a
small summary or report after checking every module, it
makes it more feasible for adoption, easier to debug why
a module ended at a certain package and see how the
manifest was created.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some of the sqlite3 files ended up in python3-misc incorrectly,
this is caused becuse we couldnt add the whole ${libdir}/python3/sqlite3
folder on the package because we also have another sqlite3-tests
package that needs to include another folder from that directory.
This patch not only fixes the do_create_manifest script to handle this
situation, but also patches the manifest (created using the script)
which also fixes a hiddn runtime dependency that we wouldn't have seen.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have a couple of python modules that contain folders themselves,
for that reason they also contain a __pycache__ folder inside those
directories, since we include the whole folder in the manifest, the
pycache directories end up with the files and not the cache files.
This patch catches that and adds the directories to the correct
structure.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some of the sqlite3 module was in python3-misc by accident, move the files
into python3-sqlite3 where they belong.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
oe-core commit: 45afadf0b6 fixed the pip problem with purelib for
python2, even though the the patch stated it was for python3. This
patch addresses the purelib problem for python3.
If you install the package python3-pip you will have a pip3 binary
where you can see the problem on the device easily where the modules
install into the incorrect area and are not able to be referenced by
python3 at all.
Example error:
pip3 install imutils
pip3 list |grep imutils || echo ERROR no imutils
ERROR no imutils
python3 -c 'import imutils'
Traceback (most recent call last):
File "<string>", line 1, in <module>
ImportError: No module named 'imutils'
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The patch tool will apply patches by default with "fuzz", which is where if the
hunk context isn't present but what is there is close enough, it will force the
patch in.
Whilst this is useful when there's just whitespace changes, when applied to
source it is possible for a patch applied with fuzz to produce broken code which
still compiles (see #10450). This is obviously bad.
We'd like to eventually have do_patch() rejecting any fuzz on these grounds. For
that to be realistic the existing patches with fuzz need to be rebased and
reviewed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The patch tool will apply patches by default with "fuzz", which is where if the
hunk context isn't present but what is there is close enough, it will force the
patch in.
Whilst this is useful when there's just whitespace changes, when applied to
source it is possible for a patch applied with fuzz to produce broken code which
still compiles (see #10450). This is obviously bad.
We'd like to eventually have do_patch() rejecting any fuzz on these grounds. For
that to be realistic the existing patches with fuzz need to be rebased and
reviewed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
python3-logging depends on python3-netserver (logging/config.py:42)
Signed-off-by: Tomasz Meresiński<tomasz.meresinski@comarch.pl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use the latest 3.5 version until the 3.6 migration is complete
Removed the following upstreamed patches:
- python3/Fix-29519-weakref-spewing-exceptions-during-interp-f.patch
- python3/upstream-random-fixes.patch
Rebased the following pathes:
- python3/0001-cross-compile-support.patch
Regenerated the manifest based on the latest release version
Updated the license checksum for the latest version that updated the
copyright dates
Signed-off-by: Derek Straka <derek@asterius.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The _pydecimal files are required to use the numbers package
and downstream packages are currently required to add a RDEPENDS
on python3-misc to avoid an import error
Signed-off-by: Derek Straka <derek@asterius.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The gdbm module wasnt being built on python3-native showing the following
error during compilation:
Failed to build these modules:
_gdbm
This patch adds the required dependency to fix the compilation problem.
This issue on python3-native caused the manifest creation script to be
unaware of the gdbm library, so this patch also fixes the create_manifest
task for target python, and the manifest file to reflect the changes on
target python as well.
Signed-off-by: Alejandro Hernandez <alejandr@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* runpy allows running modules/scripts with 'python -m foo'
- create explicit python2 and 3 packages rather than the
misc catchall
* python3-setuptools and html.parser RDEPENDS on _markupbase
- add to python3-core rather than misc catchall
* pip3 RDEPENDS on plistlib, http.client
- already packaged in python2, add to python3
- add http/ to -netclient
* "pip3 install" RDEPENDS on encodingds.idna
- encodings.idna packaged in -core, but missing:
- stringprep (move from -codecs to -core)
- unicodedata (move from -codecs to -core)
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
See previous commit (python2 version) for more info, since mostly
everything applies here as well.
Old manifest file had several issues:
- Its unorganized and hard to read and understand it for an average
human being.
- When a new package needs to be added, the user actually has to modify
the script that creates the manifest, then call the script to create
a new manifest, and then submit a patch for both the script and the
manifest, so its a little convoluted.
- Git complains every single time a patch is submitted to the manifest,
since it violates some of its guidelines.
- It changes or may change with every release of python, its impossible
to know if the required files for a certain package have changed
(it could have more or less dependencies), the only way of doing so
would be to install and test them all one by one on separate individual
images, and even then we wouldnt know if they require less dependencies,
we would just know if an extra dependency is required since it would
complain, lets face it, this isnt feasible.
- The same thing happens for new packages, if someone wants to add a new
package, its dependencies need to be checked manually one by one.
Features/Fixes:
- A new manifest format is used (JSON), easy to read and understand.
This file is parsed by the python recipe and python packages
read from here are passed directly to bitbake during parsing time.
- It provides an automatic manifest creation task (explained on previous
commit), which automagically checks for every package dependencies and
adds them to the new manifest, hence we will have on each package
exactly what that package needs to be run, providing finer granularity.
- Dependencies are also checked automagically for new packages
(explained on previous commit).
This patch has the same features as the python2 version but it differs
in the following ways:
- Python3 handles precompiled bytecode files (*.pyc) differently.
for this reason and since we are cross compiling, wildcards couldnt be
avoided on python3 (See PEP #3147 [1]).
Both the manifest and the manifest creation script handle this
differently, the manifest for python3 has an extra field for cached
files, which is how it lets the user install the cached files or not
via : INCLUDE_PYCS = "1" on their local.conf.
- Shared libraries nomenclature also changed on python3, so again, we
use wildcards to deal with this issue ( See PEP #3149 [2]):
- Fixes python3 manifest, python3-core should be base and everything
should depend on it, hence several packages were deleted:
python3-enum, re, gdbm, subprocess, signal, readline.
- When building python3-native it adds as symlink to it called
nativepython3, which is then isued by the create_manifest task.
- Fixes [YOCTO #11513] while were at it.
References:
[1] https://www.python.org/dev/peps/pep-3147/
[2] https://www.python.org/dev/peps/pep-3149/
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Remove two unneeded hacks. The first hack ("setup.py: no host headers
libs" patch) is not needed because we use cross-compiler (e.g.
i586-oe-linux-gcc) which has not been configured with any host system
include or library directories, and thus, we don't get any host system
directories when running "gcc -E -v".
The second hack becomes useless after the first hack has been removed
and we get the standard include and lib directories normally from gcc.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The compiled .pyc files contain time stamp corresponding to the compile time.
This prevents binary reproducibility. This patch allows to achieve binary
reproducibility by overriding the build time stamp by the value
exported via SOURCE_DATE_EPOCH.
Patch by Bernhard M. Wiedemann.
[YOCTO#11241]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemux86/qemuarm
In upstream, the following commit:
https://github.com/python/cpython/commit/e711cafab13efc9c1fe6c5cd75826401445eb585
...
commit e711cafab13efc9c1fe6c5cd75826401445eb585
Author: Benjamin Peterson <benjamin@python.org>
Date: Wed Jun 11 16:44:04 2008 +0000
Merged revisions 64104,64117 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
...
(see diff in setup.py)
It assigned libraries for multiprocessing module according
the host_platform, but not pass it to Extension.
In glibc, the following commit caused two definition of
sem_getvalue are different.
https://sourceware.org/git/?p=glibc.git;a=commit;h=042e1521c794a945edc43b5bfa7e69ad70420524
(see diff in nptl/sem_getvalue.c for detail)
`__new_sem_getvalue' is the latest sem_getvalue@@GLIBC_2.1
and `__old_sem_getvalue' is to compat the old version
sem_getvalue@GLIBC_2.0.
If not explicitly link to library pthread (-lpthread), it will
load glibc's sem_getvalue randomly at runtime.
Such as build python on linux x86_64 host and run the python
on linux x86_32 target. If not link library pthread, it caused
multiprocessing bounded semaphore could not work correctly.
...
>>> import multiprocessing
>>> pool_sema = multiprocessing.BoundedSemaphore(value=1)
>>> pool_sema.acquire()
True
>>> pool_sema.release()
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ValueError: semaphore or lock released too many times
...
And the semaphore issue also caused multiprocessing.Queue().put() hung.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Alexander Kanavin
Changqing Li
Serhey Popovych
Alejandro Enedino Hernandez Samaniego
Ross Burton
Mingli Yu
Hugues Kamba
Anuj Mittal
Markus Lehtonen
Joe Slater
Richard Purdie
Jason Wessel
Tomasz Meresiński
Derek Straka
Alejandro Hernandez
Tim Orling
Alejandro Hernandez
Juro Bystricky
Hongxu Jia