summaryrefslogtreecommitdiffstats
path: root/meta/recipes-devtools/perl
AgeCommit message (Collapse)Author
2021-03-02perl: update 5.32.0 -> 5.32.1Alexander Kanavin
Drop perl-cross-makefile.patch as it is merged upstream. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-02-26meta/recipes-devtools: Add HOMEPAGE / DESCRIPTIONDorinda
Added HOMEPAGE and DESCRIPTION for recipes with missing decriptions or homepage [YOCTO #13471] Signed-off-by: Dorinda Bassey <dorindabassey@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-12-15perl: fix installation failure because of shell issueDmitry Baryshkov
On one of my buildservers I noticed perl do_install failing with the following message: | rm: cannot remove '<OEROOT>/tmp-rpb-glibc/work/armv8-2a-linaro-linux/perl/5.32.0-r0/image//usr/lib/perl5/5.32.0/*/CORE/libperl.so': No such file or directory I tracked this down to shell being dash rather than bash not being able to expand this glob in the middle of the filename. So replace the glob expansion with the simpler one which works in all cases. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-08-13perl: Add check for non-arch Storable.pm fileJoshua Watt
Under unknown conditions, Storable.pm will be placed in the base library directory instead of under the arch specific one. This causes build issues, see https://bugzilla.yoctoproject.org/show_bug.cgi?id=13946. To try and catch this happening, add an explicit check for the bad file existing and fail the build if it is found. [YOCTO #13946] Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-07-27perl: Avoid race continually rebuilding miniperlRichard Purdie
When we run "make install" we notice miniperl rebuilding multiple times. Usually this is harmless however sometimes race issues occur such as miniperl not being executable. The issue is that crosspatch is a phony target so it always rebuilds. Adding this as a dependency of miniperl means miniperl always rebuilds too. Avoid this by injecting a direct dependency avoiding the phony target. miniperl is then only rebuilt when its input changes as desired. Patch submitted to upstream perl-cross. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-06-28perl: update 5.30.2 -> 5.32.0Alexander Kanavin
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-06-24recipes: Fix Upstream-Status Accepted -> BackportRichard Purdie
It helps our stats tracking to use Backport consitently, it mreans the same thing as Accepted in pretty much all cases. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-06-17perl: use relative paths in the perl wrapperSamuli Piippo
Use SDKPATHNATIVE so that the perl wrapper for the nativesdk can be created using relative paths and without dependency to the environment variables. Signed-off-by: Samuli Piippo <samuli.piippo@qt.io> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-06-17perl: Fix host specific modules problemsRichard Purdie
We were seeing a ton of empty perl modules being created such as "perl-module-x86-64-linux-encoding" where the name would include ${TARGET_ARCH}-linux. These files were already being filtered in an earlier do_split_packages() expression so exclude them from the latter one to remove the pointless empty modules in PACKAGES. This doesn't explain why some were not deterministic but will recude the do_package execution time and clean up the build directories at the very least. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-05-27multilib/recipes: Use new RecipePostKeyExpansion eventRichard Purdie
There are issues with multilib due to the ordering of events where some functions see the remapped multilib dependencies and some do not. A significant problem is that the multilib class needs to make some changes before key expansion and some afterwards but by using existing event handlers, some code sees things in a partially translated state, leading to bugs. This patch changes things to use a new event handler from bitbake which makes the ordering of the changes explcit. The challenge in doing this is that it breaks some existing anonymous python and dyanmic assignments. In some cases these used to be translated and no longer are, meaning MLPREFIX has to be added. In some cases these are now translated and the MLPREFIX can be removed. This change does now make it very clear when MLPREFIX is required and when it is not, its just the migration path which is harder. The patch changes the small number of cases where fixes are needed. In particular, where a variable like RDEPENDS is conditionally extended (e.g. with an override), MLPREFIX is now required. This patch also reverts: base: Revert 'base.bbclass: considering multilib when setting LICENSE_EXCLUSION' This reverts 6597130256a1609c3e05ec5891aceaf549c37985 as the changes to multilib datastore handling mean its no longer necessary. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-29perl: update to 5.30.2Alexander Kanavin
racefix.patch was merged to perl-cross determinism.patch was partially merged to perl-cross 0001-tests-adjust-to-correctly-exclude-unbuilt-extensions.patch is no longer needed as issue is addressed upstream. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-25perl: Add missing dependency for tie-hash on carp.Drew Moseley
Signed-off-by: Drew Moseley <drew.moseley@northern.tech> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-03-06libmodule-build-perl: make it reproducibleAlexander Kanavin
Particularly, delete html docs as they have sysroot paths in them, and adjust build configuration to not refer to host paths either. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-02-29libmodule-build-perl: upgrade 0.4229 -> 0.4231Tim Orling
Upstream release notes: " 0.4231 - Wed Jan 29 08:47:56 CET 2020 - Released 0.42_30 without code changes 0.42_30 - Wed Jul 31 13:15:39 CEST 2019 - Add dependency on ExtUtils::PL2Bat " Add ptest RDEPENDS: - ExtUtils::Command::MM for t/compat.t - gcc, make didn't seem like enough for ptest, replace with packagegroup-core-buildessential which definitely works - perl-dev for EXTERN.h in t/xs.t Add INSANE_SKIP dev-deps for the -ptest package because of perl-dev Five tests from t/help.t are skipped because they are TODO t/par.t is skipped because PAR::Dist (0.17+) is not present t/ppm.t is skipped because "HTML support not installed" All other tests pass. Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-02-28perl: fix lib/warnings test on core-image-satoMingde (Matthew) Zeng
Fixes [YOCTO #13296] The lib/warnings test fails on certain images such as core-image-sato. The upstream has already fixed this issue, thus submitting the relevent backport patch. Signed-off-by: Matthew Zeng <matthew.zeng@windriver.com> -- Mingde (Matthew) Zeng Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-02-21liberror-perl: upgrade 0.17028 -> 0.17029Tim Orling
Upstream release notes: " 0.17029 2020-01-28 - Rebuild for order of 'NAME' and 'VERSION' sections in the generated POD documentation (see 0.001004 in https://metacpan.org/changes/distribution/Pod-Weaver-PluginBundle-SHLOMIF ). - VERSION used to appear before NAME. " Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-02-19perl: Fix makefile race causing configuration differencesRichard Purdie
Add a missing makefile dependency which can cause differences in configuration (submitted upstream). [YOCTO #13800] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-02-18perl: Fix encode module reproducibility issuesRichard Purdie
The code is encoding host compiler parameters into target builds. Avoid this for our target builds. This should resolve builds which aren't reproducible between hosts with different compilers. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-02-08perl: Fix various reproducibile build issuesRichard Purdie
Add a patch which handles the following issues: a) Remove the \n from configure_attr.sh since it gets quoted differently depending on whether the shell is bash or dash which can cause the test result to be incorrect. Reported upstream: https://github.com/arsv/perl-cross/issues/87 b) Sort the order of the module lists from configure_mods.sh since otherwise the result isn't the same leading to makefile differences. Reported upstream: https://github.com/arsv/perl-cross/issues/88 c) Sort the Encode::Byte byte_t.fnm file output (and the makefile depends whilst there for good measure) This needs to go to upstream perl (not done) d) Use bash for perl-cross configure since otherwise trnl gets set to "\n" with bash and "" with dash Reported upstream: https://github.com/arsv/perl-cross/issues/87 Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-02-08perl: do not install files that contain build host specific dataAlexander Kanavin
This was breaking reproducibility, and the files aren't needed on target. [YOCTO #13772] Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-01-22perl: support cpan versions of core modulesJens Rehsack
Most of perl core modules are dual-life modules which exists on CPAN as well as they do in perl core. Sometime, fixes are uploaded to CPAN before a new perl is released which contains the fix of the core module. Also, some modules recent releases aren't fully backported to earlier releases (out of support, lack of specific feature, ...), which makes it up to the distribution build to choose between core or CPAN version, respectively. Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-01-16perl: fix failing ptestsAlexander Kanavin
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-01-11perl: improve reproducibilityRoss Burton
Occasionally the reproducibility selftest fails because perl-pod differs, specifically that the perltoc.pod file was sometimes missing modules. Debugging revealed that there are missing dependencies so there is a build race: building perltoc.pod from an clean build tree results in no modules being listed at all. A bug has been filed at https://github.com/arsv/perl-cross/issues/86 to solve this properly, but for now we can just delete perltoc.pod after make has finished and re-generate it. [ YOCTO #13726 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-01-10libmodule-build-perl: fix ptestsAlexander Kanavin
Particularly remove a broken detection of skipped tests (which was marking tests that actually passed), and install additional artefacts needed for testing. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-01-10perl: install typemap and other extutils metadata as part of perl-coreAlexander Kanavin
Modules actually make use of these files, so they belong in perl-core other than perl-doc (the immediate failure was ptests for libmodule-build-perl failing). Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-01-10perl: package Config.pm from arch directory into the main perl packageAlexander Kanavin
Otherwise, some modules such as libmodule-build-perl fail to work properly. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-30perl/tcl: fix /usr/share/man/man3/Thread.3 conflictsHongxu Jia
While installing perl-doc and tcl-doc to image, there is a file conflicts at do_rootfs ... |file /usr/share/man/man3/Thread.3 conflicts between attempted installs of perl-doc-5.30.1-r0.core2_64 and tcl-doc-8.6.10-r0.core2_64 ... Use update-alternatives to fix Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-30libxml-parser-perl: update to 2.46Alexander Kanavin
License-Update: readme no longer carries a copyright notice, so take it from a source file Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-09perl: update to 5.30.1Alexander Kanavin
Drop fix-setgroup.patch as the upstream has fixed the issue. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-25liberror-perl: update 0.17027 -> 0.17028Tim Orling
HOMEPAGE change from bitbucket to github Upstream release notes: - Moved the VCS repo to https://github.com/shlomif/perl-error.pm - No other significant changes. Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-10-10perl: make gdbm optionalAlexander Kanavin
Recent versions of gdbm are gplv3, so in some scenarios it is beneficial to not depend on it. (thanks Ross for leading the way with the db option :) Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-10-08perl: Handle PACKAGES_DYNAMIC for perl-nativeKhem Raj
A perl module recipe extending to provide native version causes target perl dependencies to be pulled into native build if the module recipe has RDEPENDS_${PN} = "perl-module-XXXX" e.g. libxml-sax-base-perl recipe. The reason is that native bbclass empties out PACKAGES_DYNAMIC and perl's PACKAGES_DYNAMIC_class-target is greedy enough to usurp native modules as well. Eventually we end up with errors like when sstate is used across machines * ERROR: libxml-sax-base-perl-native different signature for task do_populate_sysroot.sigdata between qemux86copy and qemuarm Therefore, to fix this native case needs to handled specially when re-assigning module dependencies in split_perl_packages(), where the modules are named correctly for native case and have a single dependency on perl-native, secondly, PACKAGES_DYNAMIC for target case needs to be reined in to spare, -native modules, thirdly, let perl-native take over the case for providing native modules This will fix several sstate signature errors like above with external perl modules providing native variants and having runtime dependencies on modules which are provided by perl proper Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-07-31perl: add PACKAGECONFIG for dbRoss Burton
perl-cross makes it easy to cleanly disable the use of Berkeley DB if desired, so add a PACKAGECONFIG for this. More of the dependencies (such as gdbm) can be controlled in the same way, but Berkeley DB is a prime contender: it's a large library which we have to ship an old release for due to licensing issues, so there are users who may want to strip it out of builds entirely. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-07-31perl: fix whitespaceRoss Burton
There was some tabs embedded in spaces, fix those. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-07-02perl: fix Upstream-Status tagsRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-21perl: Reproducible build fixesJoshua Watt
Applies two patches that are required to improve the reproducibility of builds. Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-21perl: Improve ptest package reproducibilityJoshua Watt
Fixes a few reproducibility issues in the perl ptest package: 1) config.log has a lot of paths encoded in it. This file is unnecessary for ptest, so it is omitted from the package 2) Makefile.config has a lot of paths encoded in it. This file should be fixed up using the same rules as several other files that are in the package 3) Paths in DEBUG_PREFIX_MAP are not being correctly removed from files because DEBUG_PREFIX_MAP is now several command line arguments. Instead of requiring an exact match for all arguments, remove any matching argument. Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18libmodule-build-perl: upgrade 0.4224 -> 0.4229; enable ptestTim Orling
* Add runtime and ptest dependencies * Add own run-ptest, since we need to run blib License-Update: License lines moved up in README Upstream release notes: 0.4229 - Tue Apr 16 00:49:45 CEST 2019 - Released 0.42_28 without changes 0.42_28 - Thu Apr 19 16:34:32 CEST 2018 - Replace "MOTIVATIONS" section with "COMPARISON" [Dan Brook] - Update configure, build, test prereqs [Karen Etheridge] 0.4227 - Wed Dec 13 11:17:51 CET 2017 - Released 0.42_26 without changes 0.42_26 - Wed Dec 13 10:52:39 CET 2017 - Improve pureperl-only support (#119914) [Shoichi Kaji] - Improve the documentation of Module::Build::Compat and dynamic_config [Dan Brook] Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18libmodule-build-perl: move from meta-perlTim Orling
* cpan_build.bbclass DEPENDS on libmodule-build-perl * add self as maintainer Fixes [YOCTO #12873] Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18perl-rdepends.txt: more ptest dependencies fixesTim Orling
* File::Spec::Unix runtime depends on Cwd and constant * Module::Metadata runtime depends on version * CPAN::Meta runtime depends on Parse::CPAN::Meta and JSON::PP * ExtUtils::MakeMaker runtime depends on ExtUtils::MM_Unix * TAP::Base runtime depends on TAP::Object * TAP::Parser::SourceHandler::Perl runtime depends on TAP::Parser::SourceHandler::Executable * TAP::Harness runtime depends on TAP::Formatter::File * TAP::Formatter::File runtime depends on TAP::Formatter::Session and TAP::Formatter::Base * Many TAP::Harness::* dependencies * POD::Simple::Transcode runtime depends on POD::Simple::Transcode{dumb,smart} Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-18perl: Move perl-sanity -> perlRichard Purdie
This was moved during the perl cleanup, it can/should be moved back now as its confusing too many people. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-01libxml-perl: Fix module and ptest dependenciesRichard Purdie
This fixes runtime errors when running the ptest in a minimal image. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-01liburi-perl: Fix module ptest dependenciesRichard Purdie
This fixes runtime errors when running the ptest in a minimal image. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-01libtest-needs-perl: Fix ptest dependenciesRichard Purdie
This fixes runtime errors when running the ptest in a minimal image. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-01libxml-parser-perl: fix ptest dependenciesTim Orling
The ptests have additional dependency on: * perl-module-filehandle * perl-module-if * perl-module-test Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-05-22perl/modules: Add various missing ptest perl module dependenciesRichard Purdie
Whilst not complete, this resolves some module dependency failures being seen by various lib*-perl ptests and in quilt. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-05-16libtest-needs-perl: upgrade 0.002005 -> 0.002006Tim Orling
Change SRC_URI to https://cpan.metacpan.org License-Update: Lines moved further down in README. Upstream release notes: 0.002006 - 2019-04-04 - added additional references to related modules in pod - various internal cleanups - fix backwards compatibility with earlier versions of version.pm - fix output from test script when tests fail - added note about RELEASE_TESTING to test message on forced failures Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-26perl: drop lost patchRuslan Bilovol
Commit 68552c353255 "perl: remove the previous version of the recipe" dropped 0001-Makefile.SH-Pod-Simple-requires-Getopt-Long.patch from recipe, but left the patch itself in source tree. Remove this patch since nobody uses it. Cc: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11perl: remove the previous version of the recipeAlexander Kanavin
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
2019-01-03perl: Fix race issue for cpan/Pod-SimpleRobert Yang
Fixed: Running pm_to_blib for cpan/Pod-Simple directly [snip] /path/to/cpan/podlators/../../miniperl "-I../../lib" "-I../../lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pod2man Can't locate Getopt/Long.pm in @INC [snip] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>