Age | Commit message (Collapse) | Author |
|
systemd-vconsole-setup.service not only configures font but also
keymaps.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, after booting into the targets like multi-user.target or
graphical.target, the output of `runlevel' command is 'unknown'.
This is confusing for users. Normally, we would expect mutli-user.target
would have a `runlevel' output of 'N 3'.
This is the behaviour of Fedora20.
This patch installs symlinks for systemd-update-utmp-runlevel.service
in do_install task to fix the above problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add PACKAGECONFIG for 'journal-upload' and disable it by default.
Once enabled, it will add 'curl' to its dependency.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrade systemd from 213 to 216.
systemd-older-kernel.patch is removed as it's fixed in 216.
0001-uClibc-doesn-t-implement-pwritev-preadv.patch is removed because
the file it patches has been removed from the project.
0001-util-Including-missing.h-to-get-MAX_HANDLE_SZ.patch is removed because
it has been merged.
0001-missing.h-add-fake-__NR_memfd_create-for-MIPS.patch is backported
to fix compilation error for mips.
Below are the required kernel versions for systemd 216.
Linux kernel >= 3.0
Linux kernel >= 3.3 for loop device partition support features with nspawn
Linux kernel >= 3.8 for Smack support
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
change use of eglibc related variabled to glibc equivalents
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
- This is a big swoop change where we switch to using glibc
- option-groups are forward ported
- cross-localedef is extracted out from eglibc and hosted
at github.com/kraj/localedef, its used for cross-localedef
recipe
- Other non ported patches from eglibc are forward ported
ppc8xx cache line workaround
SH fpcr values
dynamic resolver
installing PIC archives is there but is not applied
libc header bootstrap
- Delete eglibc recipes we moved back to using glibc now
- Fix ppc/e500 build
- Fix crypt module build when options are used
- Fix fnmatch build when options OPTION_EGLIBC_LOCALE_CODE is unset
HAVE_MBSTATE_T and HAVE_MBSRTOWCS should be defined conditionally
based upon OPTION_EGLIBC_LOCALE_CODE being set/unset
- Move the ports/ patches to relevant files now that ports is gone
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Add PACKAGECONFIG for 'elfutils'.
This also fixes a build-deps QA warning about libdw.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
export GIT_SSL_CAINFO so git can find the certs
Signed-off-by: Fahad Usman <fahad.usman@gmail.com>
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
nativesdk-ca-certificates is needed in order to support oe/yocto builds with
buildtools-tarball on old hosts, as we provide libcurl, and that needs to be
able to find the certs, and there's no standard path or bundle path, so we
can't rely on the host.
Signed-off-by: Fahad Usman <fahad.usman@gmail.com>
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is no bashism in the scripts, so use /bin/sh, and add /bin/sh
interpreter for systemd's run-ptest.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add bash, python or perl to the ptest pkgs to fix the RDEPENDS issues.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
include missing.h to get MAX_HANDLE_SZ which
is not defined in uclibc.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Systemd needs some extra defines e.g.
ADJ_NANO and IPTOS_CLASS_CS6
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adjust mips to cater for new mips32r2 defaulttune
Remove upstreamed patches
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The zlib support is a must if you are using RPM backend. So this
explicitly enable it and adds a comment in the recipe to avoid its
removal by mistake.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This means these classes now avoid the allarch inherit entirely.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Build busybox on mips with -g -O, there is a ice failure:
...
shell/ash.c:8758:1: internal compiler error: in dwarf2out_var_location, at dwarf2out.c:21264
...
Please submit a full bug report,
with preprocessed source if appropriate.
See <http://gcc.gnu.org/bugs.html> for instructions.
{standard input}: Assembler messages:
{standard input}: Warning: missing .end at end of assembly
{standard input}: Error: open CFI at the end of file; missing .cfi_endproc directive
...
The following line caused the ice failure on mips:
...
void evaltreenr(union node *, int) __attribute__ ((alias("evaltree"),__noreturn__));
...
So remove evaltreenr which was a alias of evaltree, and use evaltree
to instead.
[YOCTO #6625]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The udev-cache facility uses files that represent system states, to
ensure that the cache tarball is valid to apply. These paths were
hardcoded in several places; collect them into SYSCONF_CACHED and
SYSCONF_TMP.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previous changes should obviate all known spurious errors coming out of
tar. Since real extraction failures can and will occur, stop redirecting
stdout/stderr to /dev/null.
Take this opportunity to also remove an unnecessary subshell.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Archiving sockets causes tar to report an error and return a nonzero
exit status. Archiving a mounted filesystem is harmless, but may greatly
bloat the size of the cache tarball, and wastes time on boot.
To fix these issues, use `find` to only include the files we want, which
are the file types that udev will create (block/char devices and
symlinks) that are on the same filesystem as /dev.
While we're at it, remove a subshell by archiving /dev as an absolute
path. However, `tar` will complain about stripping the leading slash on
stderr. To inhibit this, `cut` out the leading slash.
An alternative solution is to use `tar --exclude`, but that is modestly
more brittle, since we'd need to explicitly list every socket and
filesystem to exclude. Note that `tar --one-file-system` is
GNU-specific, and tar implementations generally have nothing equivalent
to `find -type`.
If using busybox `find`, this change requires CONFIG_FEATURE_FIND_TYPE=y
and CONFIG_FEATURE_FIND_XDEV=y. If using busybox `tar`, this change
requires CONFIG_FEATURE_TAR_FROM=y.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Under normal udev operation, device nodes are obviously timestamped
based on the system time at current boot. However, when using
udev-cache, they are timestamped from a previous boot.
The existence of machines lacking RTCs makes this more than a cosmetic
issue: if the current time is set further on in the boot, so that the
system time is still 1970 by the time the cache is extracted, tar will
print a timestamp warning for every extracted file (potentially hundreds
of them).
To fix, use -m on extract.
If using busybox `tar`, this commit requires
CONFIG_FEATURE_TAR_NOPRESERVE_TIME=y.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
CONFIG_FEATURE_TAR_NOPRESERVE_TIME=y is needed for the commit
"udev-cache: strip timestamps on extract". Enabling this flag increases
the size of busybox by 0 bytes on x86.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
"/etc/dev.tar.gz" doesn't adequately imply that udev-cache maintains it.
Instead, call it "/etc/udev-cache.tar.gz".
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Acked-by: Gratian Crisan <gratian.crisan@ni.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
$DEVCACHE is observed to be 100k uncompressed; compressing it reduces
its size to ~5k. But compress it outside of `tar` so that archival
operation takes as little time as possible, to minimize the risk of
devices being created/removed during execution.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Overwriting the tarball in-place could cause a partial write, if the
system stops at an inopportune time. This is mitigated by first writing
to a temporary file, then moving that file on top of the final location.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Acked-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is nothing machine specific about this recipe.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Mariadb postinstall will fail with:
ERROR: 1 Can't create/write to file '/tmp/#sql_a2a_0.MAI' (Errcode: 13)
140814 8:14:06 [ERROR] Aborting
/tmp is a link to /var/volatile/tmp, set as:
drwxr-xr-x 3 root root 60 Aug 14 08:07 .
populate-volatiles.sh does not create the directory or set
permissions, because it already exists:
Checking for -/var/volatile/tmp-.
Creating directory -/var/volatile/tmp-.
Target already exists. Skipping.
Traced the creation to the initfile in udev. Create with -m 1755
to be sure. With this patch applied, mysql postinst succeeds and
creates the neccesary user tables.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
iconf must have been a typo for iconv
rpcinfo is found elsewhere (currently rpcbind) and not eglibc-utils - replace its mention with
rpcgen
Signed-off-by: Bob Cochran <openembedded@mindchasers.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This override overrides the gettext class additions so we need to
add back the dependency manually.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upstream AM_PATH_XML2 uses xml2-config which we disable, so port this macro to
use pkg-config.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds udev rule to unmount SD card partitions in case of improper
ejection from card reader.
When SD card is ejected from card reader without being unmounted
first, kernel does not generate a REMOVE event, instead it
generates a CHANGE event(only if polling is enabled
/sys/module/block/parameters/events_dfl_poll_msecs) and we don't
have any udev rule in automount.rules to handle this event,so
partitions never get unmounted. Unmounting of partitions can be
done if udev rules handle this CHANGE event.
Signed-off-by: Abbas Raza <Abbas_Raza@mentor.com>
Signed-off-by: Yasir-Khan <yasir_khan@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Build fails otherwise if USE_NLS is set to "no".
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Build fails otherwise if USE_NLS is set to "no".
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
mingw and darwin builds need to change the value of printf from no
to yes. Whilst you can do this from a bbappend, its currently a bit ugly
and assumes knowledge of the other conf arguments. Fixing this in the glib
recipe directly is cleaner in this case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This isn't built/present under mingw builds so make installation
conditional upon its presence.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As the do_package_write() task is listed as deleted, remove the few
remaining references.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
For certain swap/overcommit settings (e.g. when overcommit is disabled
on a real-time system), we need to limit the stack size used by
initscripts. When the STACK_SIZE environment variable is set (usually
in /etc/default/rcS), ulimit the stack size to the value specified.
Make the stack size ulimit a soft limit, which allows the user to
increase the stack size where required without having to run the
respective application as root.
Signed-off-by: Scot Salmon <scot.salmon@ni.com>
Signed-off-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Acked-by: Rich Tollerton <rich.tollerton@ni.com>
Acked-by: Brad Mouring <brad.mouring@ni.com>
Acked-by: Bill Pittman <bill.pittman@ni.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
By default, COLUMNS is set to 80. If possible, run 'resize' to
determine what the current dimensions are. This avoids the final
part of long lines overlap the start of the same line.
Signed-off-by: Ting Liu <ting.liu@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change makes busybox aware of both connman and the standard dhcp
client, while there is a caveat about using busybox's ifup/ifdown, this
change will make the 3 possibly dhcp clients behave better when busybox
is used.
Enable the CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP feature to busybox will
search for various external clients and then add connman as an external
client.
[YOCTO #6521]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is needed in case the boot disk was created with mkdiskimage.
In that case the parameter passed is a variant of /dev/sda4 which
includes the partition number. Without this change this install script
will offer to install onto the live media.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Some mmc cards do not have all the data files in /sys/block
populated. Check for existence before displaying the files
to avoid erroring out of the install process.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This services generated from volatile-binds.bb recipe file only have
effect in a read-only filesystem. So if the rootfs is read-write, the
related service are not started.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This recipe is designed to play a key role in a read-only rootfs
of systemd based systems. It generates service files from a template,
volatile-binds.service.in and the VOLATILE_BINDS variable.
By default, VOLATILE_BINDS takes the value of "/var/volatile/lib /var/lib\n",
which leads to the generation of volatile-var-lib.service file.
This file doesn't have any effect in a read-write system, as it
has "ConditionPathIsReadWrite = !/var/lib" in the [Unit] section.
In other words, this file only has effect in a read-only rootfs.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
In commit b0df35f47fb79dc149504bd66d1186b3276f9510
("base-files: Add to make some directories needed by LSB.") there
were new groupings of dirs made. But rather than keep the grouping
names permissions based as they clearly were, it seems that it was
unfortunately misinterpreted as a counter, simply incrementing as
a new group was added.
This leads to dir3755 getting chmod'd to 0755 and dir4775 being
chmod'd to 2775 which to any new reader of the code is terribly
confusing.
Choose names that clearly reflect the permissions, and add a lsb
suffix to indicate the role.
Also note that the settings for /var/mail seem incorrect, and so
they have been aligned with what is seen in most common distros.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Mark Hatle did the historical research into why this was so,
and found that it originally was via debian import, and then
it morphed over time:
<fray> +# chown -R root:root ${D}
<fray> +# cd ${D} && chown root:src usr/src
<fray> +# cd ${D} && chown root:staff var/local
<fray> +# cd ${D} && chown root:staff home
<fray> + cd ${D} && chmod 755 `find . -type d`
<fray> + cd ${D} && chmod 1777 `cat ${S}/debian/1777-dirs`
<fray> + cd ${D} && chmod 2775 `cat ${S}/debian/2775-dirs`
<fray> that was the original code
<fray> so THAT is why they're 2775..
<fray> they were original 'src' and 'staff'.. which has gotten lost
sometime in the last 10 years
<fray> AND the origin:
<fray> commit b45c9ed40bb4f893f99127a21776aef3ae888ad7
<fray> Author: Chris Larson <clarson@kergoth.com>
<fray> Date: Tue Sep 30 16:30:41 2003 +0000
<fray> Add base-files 3.0.10 (from debian).
<fray> thats where the brain damage started ... Debian in 2003..
Here we simply convert them to being normal 755 dirs.
[YOCTO #6579]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Nothing interesting to see in the git history ; appears to have
been this way since its creation.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|