aboutsummaryrefslogtreecommitdiffstats
path: root/meta/recipes-core
AgeCommit message (Collapse)Author
2014-06-14busybox: handle syslog related files properlyChen Qi
If CONFIG_SYSLOGD is not enabled, then the related service file should not be installed as it will always fail at system start-up. The error message is as following. [FAILED] Failed to start System Logging Service. The same logic applies to CONFIG_KLOGD. So we should first check the configuration before we install these service files. [YOCTO #5302] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-13dbus: fixed mode if systemd service fileEnrico Scholz
systemd complains with | Configuration file /lib/systemd/system/dbus.socket is marked executable. Please remove executable permission bits. Proceeding anyway. | Configuration file /lib/systemd/system/dbus.service is marked executable. Please remove executable permission bits. Proceeding anyway. else. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-13dbus: disable usage of dbus-glib explicitlyEnrico Scholz
on rebuilds, dbus-native can detect an already existing dbus-glib and tries to link some tests against it. As files were unstaged and due to libtool insanities this fails with: | /usr/bin/grep: .../sysroots/x86_64-oe-linux/usr/lib/libdbus-1.la: No such file or directory | sed: can't read .../sysroots/x86_64-oe-linux/usr/lib/libdbus-1.la: No such file or directory | x86_64-oe-linux-libtool: link: `.../sysroots/x86_64-oe-linux/usr/lib/libdbus-1.la' is not a valid libtool archive | make[3]: *** [libdbus-testutils.la] Error 1 | make[3]: Leaving directory `.../work/x86_64-oe-linux/dbus-native/1.8.2-r0/build/test' Make builds predicatable (and working) by disabling usage of dbus-glib explicitly. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-10oe-core/init-install.sh: do not overwrite /etc/mtab if the link already existShan Hai
Overwriting of /etc/mtab would fail as below if the /etc/mtab link already exist during installation phase, this patch fix this problem by checking existance of the link before try to overwrite it. Error message during installation if the /etc/mtab exists: "cat: /proc/mounts: input file is output file Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-06-10glib-2.0: fix paths to test binariesRoss Burton
The tests are installed to $libexecdir not $libdir/glib-2.0. By default these are the same location but they can be changed independently. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-06busybox: put udhcpc in backgroundSaul Wold
If the interface is slow to come up udhcpc will continue in the background [YOCTO #6339] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-06grub-2.00: remove our 40_customRoy Li
We have this in recipes-bsp/grub/grub/40_custom: [snip] menuentry "Linux" { set root=(hd0,1) linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet } [snip] These lines are only for initrdscripts/files/init-install.sh, the side effect is that it would make the target's grub-mkconfig doesn't work well since the 40_custom will be installed to /etc/grub.d/40_custom, the grub-mkconfig will run the 40_custom, and there will always be a 'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we can do this in init-install.sh rather than grub to fix the problem, which is also much simpler. We have done the related work in init-install.sh, now we need remove our own 40_custom, and use grub's own 40_custom which is the right one. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-06libxml2: fix python packaging for nativesdkPaul Eggleton
We enable the python module in nativesdk-libxml2, but the python binary used is in the native sysroot and thus you get the module installed in the wrong path. Even with that fixed the python files are still unpackaged, so create an ${PN}-python package and add them to it. (This does not affect the libxml target build at all since python is disabled for that.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-06systemd: update a uclibc specific patch to avoid segment fault errorChen Qi
The alloca() function allocates space in the stack frame of the caller, so using alloca(new_size - old_size) would possibly crash the stack, causing a segment fault error. This patch fixes the above problem by avoiding using this function in journal-file.c. [YOCTO #6201] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-06readline-5.2: exclude autoheaderRoss Burton
readline hand-maintains config.h.in so exclude autoheader and re-use a patch from readline-6.3 to fix a typo in variable names. See oe-core 8c37d32d6133c6ad2b9142e7a42775e7a979b570 against readline-6.3 for further rationale. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-06readline-5.2: use upstream's aclocal.m4 as acinclude.m4Ross Burton
Instead of shipping a fork of the upstream aclocal.m4, simply rename it to acinclude.m4 at configure time. We don't need the fork now that autoheader is excluded. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-03recipes: Add missing pkgconfig class inheritsRichard Purdie
These recipes all use pkg-config in some way but were missing dependencies on the tool, this patch adds them. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-01util-linux: add sulogin to alternatives listSaul Wold
sulogin is provided by both busybox in /sbin/sulogin and util-linux provides one in /usr/sbin/sulogin, so move util-linux's to sbin and setup ALTERNATIVE_LINK. [YOCTO #6384] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-01systemd: Upgrade 212 -> 213Khem Raj
boots on all qemu machines Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-30update-rc.d: fix to handle priority numbers correctlyChen Qi
The update-rc.d treated priority numbers begin with '0' as octal numbers. This led to problems of update-rc.d being unable to handle priorities like '08' or '09' correctly. This patch fixes the above problem. [YOCTO #6376] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-30eglibc: Fix configure when re-building with goldKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-30gcc, uclibc: Add/Fix Upstream-Status in patchesKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-29readline: use upstream's aclocal.m4 as acinclude.m4Ross Burton
Instead of shipping a fork of the upstream aclocal.m4, simply rename it to acinclude.m4 at configure time. We don't need the fork now that autoheader is excluded. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-29readline: exclude autoheader from autoreconfRoss Burton
readline ships a hand-maintained config.h, instead of letting autoheader generate one from configure.ac. The required arguments to AC_DEFINE are not in configure.ac so autoheader will produce warnings and the generated code will not behave as expected. Solve this by excluding autoheader from autoreconf, so the upstream config.h.in is used. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-29readline: add missing STRUCT_DIRENT_D_* symbols to config.h.inRoss Burton
readline maintains config.h.in by hand but several symbols are incorrect. Fix these so that the test results are reflected in config.h. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-23initramfs-live-install: avoid using grub.d/40_customRobert Yang
We have this in recipes-bsp/grub/grub/40_custom: [snip] menuentry "Linux" { set root=(hd0,1) linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet } [snip] These lines are only for initrdscripts/files/init-install.sh, the side effect is that it would make the target's grub-mkconfig doesn't work well since the 40_custom will be installed to /etc/grub.d/40_custom, the grub-mkconfig will run the 40_custom, and there will always be a 'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we can do this in init-install.sh rather than grub to fix the problem, which is also much simpler. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-20initrdscripts: fix for /run/mediaChen Qi
mount.sh in udev-extraconf was modified to use /run/media instead of /media. Unfortunately, our scripts in initrdscripts have some dependency on the auto-mounting mechanism proviced by udev-extraconf. So these scripts should also be fixed to use /run/media instead /media, otherwise, our live image cannot work correctly. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-20init-live.sh: list block devices correctlyChen Qi
Instead of using 'ls /dev/sd*' command to list block devices, we should rather use 'cat /proc/partitions'. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-20udev-extraconf: fix the misuse of /run/mediaChen Qi
The error was introduced by the following commit. acfe3014d41de5e87cdbc58d0396349c6b9c3ffd udev-extraconf: update mount.sh to use /run/media instead of /media It accidently replaced 'device/media' by 'device/run/media' which causes error for live images to be unable to boot up correctly, complaining "Cannot find rootfs.img in /media/*". This patch fixes the above problem. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-15dropbear: add missing patch headerPaul Eggleton
* Add a brief subject mentioning what the patch is for * Add Upstream-Status Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-15glib-2.0: Do not use readlink to set target paths.Drew Moseley
Do not use readlink to set ABS_GLIB_RUNTIME_LIBDIR when cross compiling. Doing so causes host paths to potentially pollute the target. Unfortunately in this case we don't actually convert to an absolute path. Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-15dbus: Update to 1.8.2 versionChong Lu
Upgrade dbus to 1.8.2. Modify ptest suite to make it enabled on new version. If systemd in DISTRO_FEATURES, we expect to install dbus systemd unit files. Remove unneeded patches since it's included in new version. Remove unrecognized option: "--with-xml" [YOCTO #6092] Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-13eglibc: remove usage of FILESPATHPetter Mabäcker
Fixes [YOCTO #4497] Usage of FILESPATH is discouraged, since it can make recipes harder to bbappend. Instead FILESEXTRAPATHS should be used to extend the path. If possible try to use any of the default FILESPATH dirs. Also remove superfluous comment and do minor indentation fix. Signed-off-by: Petter Mabäcker <petter@technux.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-13uclibc: remove usage of FILESPATHPetter Mabäcker
Fixes [YOCTO #4497] Usage of FILESPATH is discouraged, since it can make recipes harder to bbappend. Instead FILESEXTRAPATHS should be used to extend the path. Signed-off-by: Petter Mabäcker <petter@technux.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-13dbus: remove usage of FILESPATHPetter Mabäcker
Fixes [YOCTO #4497] Usage of FILESPATH is discouraged, since it can make recipes harder to bbappend. Instead FILESEXTRAPATHS should be used to extend the path. Signed-off-by: Petter Mabäcker <petter@technux.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-13systemd: remove tcp-wrappers optionRoss Burton
systemd version 212 removed the TCP wrappers support, so remove the PACKAGECONFIG stanza for it. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-13glib-2.0: upgrade to 2.40.0Ross Burton
The patches Fix-Werror-format-string, gio-test-race, gtest-skip-fixes, and ptest-dbus have all been merged upstream. Two license checksums changed as upstream has updated the FSF address in those files. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-11systemd: Upgrade past 212 releaseKhem Raj
Remove unconditional enable-xz, its specified by PACKAGECONFIG anyway Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-11util-linux: fix parallel build issure for PATHFILESChen Qi
When compiling util-linux, it's possible to encounter the following error. /bin/sh: line 2:: misc-utils/uuidd.8.tmp: No such file or directory This is because that the misc-utils directory doesn't exist when trying to write to misc-utils/uuidd.8.tmp. When generating misc-utils/uuidd.8 (or anything in PATHFILES), its directory may not have been created yet. So we need to ensure the existence of the directory to avoid the compilation error. [YOCTO #6292] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-11mirrors.bbclass: Add mirror site for savannahChanghyeok Bae
* The SRC_URI is not accessible. So need to add mirror site referred by the original site. * The problem is that http://download.savannah.gnu.org/releases redirects to closest mirror and few mirrors (e.g. .jp) weren't working correctly while http://download-mirror.savannah.gnu.org/releases/ seems to be reliable. * Add SAVANNAH_GNU_MIRROR and SAVANNAH_NONGNU_MIRROR variable in bitbake.conf. * Change the SRC_URI using the new variable. Signed-off-by: Changhyeok Bae <changhyeok.bae@lge.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-08libxml2: fix CVE-2014-0191Maxin B. John
It was discovered that libxml2, a library providing support to read, modify and write XML files, incorrectly performs entity substituton in the doctype prolog, even if the application using libxml2 disabled any entity substitution. A remote attacker could provide a specially-crafted XML file that, when processed, would lead to the exhaustion of CPU and memory resources or file descriptors. Reference: https://access.redhat.com/security/cve/CVE-2014-0191 Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-08uclibc: Set MULTILIB_DIR based on baselibRichard Purdie
baselib contains the current "lib" value so pass this into uclibc's configration to allow multilib builds to work correctly. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-08ptest: Work from PTEST_ENABLED, not DISTRO_FEATURESRichard Purdie
Some classes of recipe disable ptest even though its in DISTRO_FEATURES (e.g. nativesdk). We shouldn't attempt to build ptest packages when its disabled. This replaces some DISTRO_FEATURE checks with PTEST_ENABLED checks instead. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-08initscripts: avoid pipe with sedMatthieu Crapet
Small optimisation in /etc/init.d/populate-volatile.sh. Replace: cat <file> | sed -e xxx By: sed -e xxx <file> Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-08sysvinit-inittab: avoid pipe with grepMatthieu Crapet
Replace: cat <file> | grep xxx By: grep xxx <file> Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-08dropbear: avoid pipe with sedMatthieu Crapet
Replace: cat <file> | sed -e xxx By: sed -e xxx <file> + fix indentation Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-06ldconfig-native: also default to lib32 and lib64 directoriesMing Liu
make ldconfig default to /lib+/usr/lib, /lib32+/usr/lib32 and /lib64+/usr/lib64 on bi-ABI architectures. Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-06serial-getty service: Add xterm as default TERMJoel Fernandes
In poky with systemd enabled, vt102 is selected for getty causing user to experience a very crappy terminal. Default TERM to xterm. Reviewed-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-05systemd: Fix build with gcc 4.9Khem Raj
We need to use gcc-nm and gcc-ar to deal with slim objects which are generated when using -flto (From OE-Core rev: e6d84c9f4fef201217ada60711ecfb94bc5dc2e0) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-01Add texinfo.bbclass; recipes that use texinfo utils at build-time inherit it.Max Eliaser
The class itself currently does nothing. The idea is to mark all recipes that make use of the texinfo utilities. In the future, this class could be used to suppress the generation/formatting of documentation for performance, explicitly track dependencies on these utilities, and eliminate Yocto's current dependency on the host system's texinfo utilities. Signed-off-by: Max Eliaser <max.eliaser@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-30util-linux: Update to 2.24.2Saul Wold
rebase util-linux-native patch Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-04-30binutils/gcc/gdb: Add TARGET_ARCH to PN for all cross recipesRichard Purdie
This allows them to co-exist together in the native sysroot, with one set of cross tools per target architecture. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-29systemd: Check for HAVE_POSIX_FALLOCATEDrew Moseley
The check for the config variable is using the wrong define resulting in the #else always being used. Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-04-27uclibc: Add libgcc-initial to DEPENDSKhem Raj
Now Separated out libgcc-initial is there Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-25Upstream-Status CleanupsSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-07 13:01:39 +0000