summaryrefslogtreecommitdiffstats
path: root/meta/recipes-core/busybox
AgeCommit message (Collapse)Author
2020-07-03busybox: 1.31.1 -> 1.32.0Andrej Valek
- update to last stable version 1.32.0 - remove and refresh already merged patches Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-05-07busybox: disable i2ctransferBartosz Golaszewski
I2C tools are built by default in busybox. OE-core on the other hand disables them all in the busybox defconfig except i2ctransfer. Since this looks like an oversight, this patch proposes to disable this tool as well. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-26busybox: Correct the name of the bzip2 licensePeter Kjellerstedt
The common bzip2 license was renamed from "bzip2" to "bzip2-1.0.6" in commit 669600ef to match the official SPDX identifier. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-05busybox: sysctl: ignore EIO of stable_secret below /proc/sys/net/ipv6/confYi Zhao
Avoid confusing messages caused by EIO on reading /proc/sys/net/ipv6/conf/*/stable_secret if those are not set yet. Make it behave the same as procps(>=3.3.13). Fixes: $ sysctl -a | grep ipv6.conf | grep stable_secret sysctl: error reading key 'net.ipv6.conf.all.stable_secret': Input/output error sysctl: error reading key 'net.ipv6.conf.default.stable_secret': Input/output error sysctl: error reading key 'net.ipv6.conf.eth0.stable_secret': Input/output error sysctl: error reading key 'net.ipv6.conf.lo.stable_secret': Input/output error Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-03busybox: on upgrade save busybox if it is the last shellJeremy Puhlman
During a busybox upgrade on a ipk based system, it is possible that busybox is the only shell in the system. During the uninstall the alternative for /bin/sh is removed and everything after that goes down hill. * Add a check to verify if busybox is the shell, and save it to the busyboxrm directory created in tmp. Then add an alternative for /bin/sh that points to that busybox at the lowest priority. * Add PATH to the busyboxrm directory using shell(as during an upgrade busybox and its links are missing). * When install over remove extra busybox if present. deb and rpm are uneffected by the bug because they both drag in bash, however neither upgrade seemed to have issue with the changes. [YOCTO 13850] Signed-off-by: Jeremy A. Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-02-15busybox: Backport patches to support removal of __NR_clock_gettimeKhem Raj
This helps compiling with musl on 32bit arches now that musl has switched to 64bit time_t Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-02-02busybox: sort the .config file used by ptestsAlexander Kanavin
It was found to have slight variations in order of options depending on the host. Sorting it helps reproducibility. [YOCTO #13756] Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-01-27busybox: udhcpc: fix 'ip route add' with multiple interfaces on the same networkLuca Ceresoli
The udhcpc script fails to properly set a default route when: - 'ip' is present ($have_bin_ip -eq 1) - there are 2 or more interfaces connected to the same network (e.g. ethernet + wifi on the same home LAN / same DHCP server) In this case, when the first interface gets an address from DHCP (e.g. eth0), a default route is set correctly. When the second interface (e.g. wlan0) gets its address, 'ip route add' without 'dev $interface' sets the route on the other interface. The result looks like: # ip route default via 192.168.1.1 dev eth0 metric 5 default via 192.168.1.1 dev eth0 metric 10 # wrong dev here 192.168.1.0/24 dev eth0 scope link src 192.168.1.20 192.168.1.0/24 dev wlan0 scope link src 192.168.1.30 # The situation might go unnoticed until eth0 is disconnected, because only wlan0 is present but there is no route through wlan0. Fix by explicitly passing "dev $interface" to 'ip route add'. Note that all other 'ip' invocations already have "dev $interface" passed. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-01-21busybox: udhcpc: fix IPv6 support when using udhcpcStefan Agner
The udhcpc script calls ip addr flush .. which flushes addresses of any address family, including IPv6. However, busybox udhcpc is IPv4 only and should not influence IPv6 addressing. Hence use ip addr flush with family constrait. The script particularly broke IPv6 SLAAC: Typically when udhcpc calls the script the kernel already assigned the IPv6 link-local address. The flush removes the link-local IPv6 address again and prohibits proper IPv6 operation such as SLAAC since neighbor discovery protocol relies on IPv6 link-local addressing. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-01-16busybox: fix failing ptestsAlexander Kanavin
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-01-11busybox: Update inittabKhem Raj
Add stdin/stdout/stderr symlinks in case when not using hotplug Disable ctrl+alt+del, not used much Mount swap if defined Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-30busybox: Replace obsolete stime API with clock_settimeKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-05recipes: change SRC_URI to use httpsStefan Müller-Klieser
Change all recipes to https where we get an http 301 permanent redirect. Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-25busybox:upgrade 1.31.0 -> 1.31.1Wang Mingyu
Signed-off-by: Wang Mingyu <wangmy@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-09-18busybox: rcS and rcK should not be writeable by everyoneAndre McCurdy
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-09-16busybox.inc: handle empty DEBUG_PREFIX_MAPMikko Rapeli
DEBUG_PREFIX_MAP can be empty if e.g. old clang toolchain doesn't support the default poky values for gcc. Fixes build failure: ERROR: Logfile of failure stored in: /home/builder/src/base/build/tmp/work/aarch64-poky-linux/busybox/1.31.0-r 0/temp/log.do_configure.14451 Log data follows: | DEBUG: Executing shell function do_configure | sed: -e expression #1, char 0: no previous regular expression | WARNING: exit code 1 from a shell command. | ERROR: Execution of '/home/builder/src/base/build/tmp/work/aarch64-poky-linux/busybox/1.31.0-r0/temp/run.do_configure.14451' failed with exit code 1: | sed: -e expression #1, char 0: no previous regular expression | WARNING: exit code 1 from a shell command. | This log entry is really useless for debugging problems so add "set -x" to the configure script so that details can be seen if something isn't working. Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-09-16busybox-inittab: minor formatting tweaksAndre McCurdy
Add an empty line to inittab before the line(s) which start getty. Also cleanup indent in recipe do_install(). Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-09-16busybox: drop inittab from SRC_URI ( now moved to busybox-inittab )Andre McCurdy
The reference to inittab should have been removed from busybox SRC_URI when the file was moved into the busybox-inittab recipe: http://git.openembedded.org/openembedded-core/commit/?id=afb09abd2f0f7555ba156260a87fd3867f591310 Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-09-16busybox: drop unused mount.busybox and umount.busybox wrappersAndre McCurdy
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-07-18busybox: enable unicode supportMikko Rapeli
While creating and deleting files with unicode or other encodings works, it's annoying when ls and other core utils show questionmarks instead of the unicode characters. In 2019, it's quite common that users of embedded devices based on yocto need unicode support. Debugging a box with unicode encoded file names is a bit annoying when core utils from busybox don't support them. The unicode config fragment has the same config as Debian in their deb and udeb builds of version 1:1.30.1-4. If developers do not want this or other default yocto features in busybox, or optimize the configuration for size, then they likely run a completely custom configuration. Thus I think it's safe to enable unicode support by default. Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-07-03busybox: 1.30.1 -> 1.31.0Andrej Valek
- update to last stable version 1.31.0 - remove and refresh already merged patches Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-27busybox: Fix typo in syslog initscriptRichard Purdie
The change to ensure the existing processes shut down had a clear copy and paste error. This really fixes syslog to avoid errors on restart. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-27busybox: Improve syslog restart handlingRichard Purdie
We're seeing races on the autobuilder where syslogd fails to shut down fast enough to be restarted leading to failures. Add some checks to ensure when restarting that processes exit before being restarted. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-27busybox: make postinst run firstly before update-alternativesRobert Yang
The update-alternatives.bbclass' postinst script runs firstly before other postinst, but busybox needs set basic tools such as sed command firstly, otherwise, update-alternatives doesn't work, so run busybox' postinst firstly to fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-05-30busybox-inittab/sysvinit-inittab: add rconflictsChangqing Li
when both installed, do_rootfs report error like: file /etc/inittab conflicts between attempted installs of busybox-inittab-1.30.1-r0.qemux86 and sysvinit-inittab-2.88dsf-r10.qemux86 so add each other to rconflicts Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-04-23busybox: fix ptest failure about 'dc'Chen Qi
Fix the following two failure of busybox ptest: FAIL: dc read FAIL: dc read string These two test cases relies on the functionalities enabled by CONFIG_FEATURE_DC_BIG. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-04-11busybox: Use PTEST binary directoryMariano Lopez
This will generate the symlinks in the ptest binary directory using the ptest class functionality instead of generating them manually. Because the ptest class uses update-alternatives to get the metadata for the symlinks it will respect the use of BUSYBOX_SPLIT_SUID automatically. [YOCTO #12597] Signed-off-by: Mariano Lopez <just.another.mariano@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-04-09busybox: Enable domain search list supportAlexey Brodkin
This option is enabled by default in Busybox and becomes useful in networks with internal resources becasue allows to use much shorter names. E.g. instead of "server.internal.company.com" it's possible to use just "server" if DHCP server is configured with: ---------------------------->8----------------------- option domain-search "internal.company.com"; ---------------------------->8----------------------- Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-04-02busybox: fix CONFIG_RFKILL enable logicMatt Porter
Currently CONFIG_RFKILL is enabled only if both bluetooth *and* wifi distro features are present. It should be enabled when either feature is present. Fix this by switching to use of bb.utils.contains_any(). Signed-off-by: Matt Porter <mporter@konsulko.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-02-25busybox: enable CONFIG_FLOAT_DURATIONAdrian Bunk
The 1.29.3 -> 1.30.1 upgrade lost support for sleep with float values (e.g. "sleep 0.1") since this replacement for CONFIG_FEATURE_FLOAT_SLEEP (enabled in thud) was missing. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-02-18busybox: 1.29.3 -> 1.30.1Andrej Valek
- update to last stable version 1.30.1 - remove and refresh already merged patches - re-generate defconfig Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-02-06busybox: update to 1.29.3Dustin Bain
Updates busybox to version 1.29.3 to fix a bug related to parsing of config files: 2993551ef ("Revert "libbb: remove unnecessary variable in xmalloc_fgets"") Upgrading the recipe was chosen instead of backporting the fix as a patch because the only difference between version 1.29.2 and 1.29.3 is this revert. Signed-off-by: Dustin Bain <dustin.bain@garmin.com> Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11busybox: Enable mountpoint and setsid appletsKhem Raj
This is needed by some init system services and if init system is not sysvinit then we dont have it, therefore its useful to have it provided via busybox as a backup Enable CONFIG_SETSID to get setsid, needed by runit Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-11-23busybox: add zip to RDEPENDS of ptest packageChen Qi
busybox's unzip test case requires zip command. However, busybox itself does not provide one. So add zip as a runtime dependency. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-23busybox: ship a symlink farm for ptestRoss Burton
Ship a symlink farm for busybox, which correctly considers SUID split. This ensures that all utilities used in busybox's test cases will first use that ones that are provided by busybox. Modify run-ptest to prepend the directory to PATH, and also change variable name from current_dir to current_path, as the former is a little misleading. `readlink -f $0' gets a path to the current script instead of the current directory. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-23busybox: check CONFIG_DESKTOP before using 'od -t' in test caseChen Qi
The '-t' option support for 'od' is enabled by CONFIG_DESKTOP. So check it before using it in test cases. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-23busybox: fix du-l-works test caseChen Qi
64 + 64 + 16 = 144K 144 + sizeof_a_directory >= 145 So fix to use 145 instead of 144. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-23busybox: use example.org instead of google.com in wget test caseChen Qi
Use example.org to ensure it's always reachible. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-23busybox: check uudecode before using it in test caseChen Qi
Check uudecode before using it in test case to avoid unexpected failure. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-23busybox: enable bzip2 by defaultChen Qi
bunzip2 is enabled by default, but bzip2 is not. This is kind of strange, and it also causes busybox's ptest failure regarding bunzip2, as bunzip2's test case needs bzip2 command. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-23recipes: Remove tab indentations in python codeRobert Yang
Use 4 spaces to replace a tab. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-16busybox: skip known bugs in ptestChen Qi
Set SKIP_KNOWN_BUGS in run-ptest script to skip ptest cases which are known to relate to some known bugs. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-16busybox: Provide /bin/ash when usrmerge is enabledWes Lindauer
When usrmerge is enabled, scripts that were explicitly using #!/bin/ash will cause a QA Error like the following: QA Issue: bar.sh contained in package foo requires /bin/ash, but no providers found in RDEPENDS_foo? [file-rdeps]. It seems perfectly acceptable for scripts to use /bin/ash so provide it along with /bin/sh. Signed-off-by: Wes Lindauer <wesley.lindauer@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-13busybox: make busybox.links.{suid, nosuid} reproducibleMartin Hundebøll
The busybox.link.* files are generated from autoconf.h and applets.h, which are both auto-generated by the build system. The contents of the two files might be in different order, and so the link files are not reproducble as is. Fix this by sorting the lists using `sort`. Signed-off-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-10-12busybox: move reboot out of init.cfgAnuj Mittal
reboot is needed for initramfs where no init manager is set. This partially reverts: commit b6fbb3f3d4d6367b0fd7921078f67057551c7ede Author: Chen Qi <Qi.Chen@windriver.com> Date: Mon Jul 30 17:41:57 2018 +0800 busybox: move init related configs to init.cfg Move init related configs to init.cfg. These config items do not make much sense unless busybox is selected as the init manager. They should belong to init.cfg. We would need to set up ALTERNATIVES for reboot in this case. Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-10-10busybox: unify recipe styleAndrej Valek
- change spaces to tabs and unify indent level Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-10-10busybox: do not write grep outputs into logAndrej Valek
Make grep quiet for prevent to write information into logs. Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-10-10busybox: fix conflict with runlevel appletAndrej Valek
- remove OE runlevel script which conflicts with busybox's applet - don't install empty directories Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-09-07busybox/packagegroups: Break out the busybox-syslog dependencyRichard Purdie
The busybox-syslog rrecomends is proving tricky as it gets pulled in early and there are conflicts between its use of update-alternatives and busybox needing to provide those things. We already have recipes using BAD_RRECOMMENDS to remove this dependency, it probably makes sense to spell it out explicitly and allow it to be overridden more easily. This patch does this, dropping the now unneeded BAD_RRECOMMENDS. It preserves the dependency as a recommendation for now, further cleanup may allow simplication of that. This unbreaks certain build failures on the autobuilder, more as a workaround but is a change we probably want to make anyway. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-09-07busybox: Ensure busybox-syslog depends on busyboxRichard Purdie
If we don't do this, busybox-syslog can install before busybox which clearly doesn't make sense and can trigger postinst failures (missing sed which u-a depends upon). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-26 16:59:20 +0000