Age | Commit message (Collapse) | Author |
|
Previously this was using ${PN}-syslog.service, which changes with multilib.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When the mount command is not given the filesystem type to mount, then
it will try all the known filesystems. However, when a filesystem is not
supported by the kernel, the mount function call will return ENODEV.
The following patch, ecd90bc6aa63da2aef2513ac090d4b426b2b719c,
introduced a problem because it bailed out on ENODEV too. Instead it should
have only bailed out on ENOMEDIUM.
[YOCTO #4308]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add back inetd and inetd.conf files which are needed if
CONFIG_INETD is enabled in the defconfig. Grabbed these
files from oe-classic
This patch is based on the previous patch for denzil:
http://patches.openembedded.org/patch/33235/
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After using 'bitbake -c menuconfig busybox' to customize defconfig,
do_install fail to detect the changes. Grep configs in ${B}/.config
instead of ${WORKDIR}/defconfig.
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current behaviour of busybox is to try all fstype when automounting
even when no media exists. The util-linux mount command bails when no
media exists, so change the behaviour of busybox to do the same.
It could also be argued that the KERN_INFO message from btrfs could be
removed, but that would be harder to accomplish.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
systemd uses strictatime when mounting tmpfs. Luckily this is already supported
upstream, so backport the patch from git.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
systemd needs "swapon -p", so as the impact is minimal enable it unversally.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
/etc/default/rcS might be missing if the init manager is not sysvinit.
So we have to check for the existence of this file before sourcing it.
[YOCTO #3697]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add config fragments to busybox.
The implementation makes use of merge_config.sh script in kern-tools-native.
The use case is similar to the yocto kernel's configuration fragments.
We also add kern-tools-native to busybox's DEPENDS variable to ensure
that merge_config.sh is available when required.
[YOCTO #3379]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
busybox test case du-k-work fails on ext3/4 image whose size less than
512M. Add patch testsuite-du-du-k-works-fix-false-positive.patch to fix
it and it has been merged by upstream.
[Yocto 2896]
(From OE-Core rev: ffe4f8a859d5e71e3e33363d61f0470a32c48d66)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make UTC variable in /etc/default/rcS has effect on hwclock.sh.
This variable declares whether the Hardware Clock is kept in UTC
or local time. Default its value to "yes" and change the comment.
[YOCTO #3341]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The busybox defconfig lacks a stat tool, the functionality of which
cannot be reproduced in a way accessible to a shell script running in
a minimal configuration. Enable, and modify the installation path to
/usr/bin/stat to match the coreutils tool for proper alternatives
handling.
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The license for bzip2 is not quite BSD. I have an email out to the
maintainer to see if we can utilize a common BSD license (or something
else) however, for now, we should revert bzip2 back to a special
license.
As busybox also utilizes a lightly modified bzip2, this also
effects busybox.
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix failures like:
Configuring busybox-hwclock.
usage: update-rc.d [-n] [-f] [-r <root>] <basename> remove
update-rc.d [-n] [-r <root>] [-s] <basename> defaults [NN | sNN kNN]
update-rc.d [-n] [-r <root>] [-s] <basename> start|stop NN runlvl [runlvl] [...] .
-n: not really
-f: force
-v: verbose
-r: alternate root path (default is /)
-s: invoke start methods if appropriate to current runlevel
Collected errors:
* pkg_run_script: package "busybox-hwclock" postinst script returned status 1.
* opkg_configure: busybox-hwclock.postinst returned 1.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updated defconfig file from generated .config
Disabled CONFIG_LSOF,CONFIG_CROSS_COMPILER_PREFIX, and CONFIG_EXTRA_CFLAGS
for backwards compatibility.
Added busybox-1.20.2-kernel_ver.patch from upstream.
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We package this separately to be able to pull this in only if this makes
sense for the MACHINE.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
[YOCTO #2896]
The du-k-works test seems to assume that du -k on a directory with two files
totaling 80 kilobytes should report either 80k or 88k. In ext4 filesystm however,
both busybox' du -k and coreutils' du -k reports a size of 84k which causes the
test to fail.
Intergrate the patch from:
http://git.busybox.net/busybox/commit/?id=a5ee090e8651692545514a81a16c6cde3a2dc577
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
udhcpc is invoked from the networking service, so it shouldn't exist
standalone. If /etc/init.d/busybox-udhcpc is present, it will cause
udhcpc to be started two times.
And since the script doesn't support the stop action, it will cause
udhcpc to be started even when system is being shutdown.
Remove /etc/init.d/busybox-udhcpc to resolve the issues.
[YOCTO #2840]
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #2788]
The system will be hung when udhcpc starts, if nfs is mounted
at "/" directory and default route is different after starting
udhcpc.
The cause is that root_is_nfs() does not work after kernel-2.6.37,
since the device name has been changed from /dev/root to
${IPADDR}:${NFSDIR} on /proc/mounts. which leads to remove
the default routes to nfs server,
Now we use a loose match to check if rootfs is nfs.
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
patch mkfs.minix.tests to have correct md5sum on big endian platform.
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
busybox wget testing fails
In cases where busybox wget is invoked with -P <...> and the url ends
in "/", the download directory is ignored (ie the file index.html is
implied), this change enables the -P option for those urls.
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Seen with eglibc 2.16
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
[YOCTO #2535]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When update alternatives was modified, the syslog configuration file
alternative was incorrectly defined to be "busybox". Fix this by
enabling the proper target file.
[YOCTO #2557]
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
rfkill is a usefull tool when you have a device with bluetooth and wifi enabled
[YOCTO #2494]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
* Support resolvconf
* Avoid bashism $((metric++))
* Use 'domain' instead of 'search' for domain parameter
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* OE-Core provides its own copy of simple.script.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The -mabi option is part of HOST_CC_ARCH which does not
appear in CFLAGS. This is for completeness since compiler
already defaults to n64 it wont matter that much
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
* busybox-udhcpc-no_deconfig.patch broke the options,
preventing udhcpc from forking into the background
if no lease can be obtained.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commit 68dc2a3fa30c03a196d650de34d0c657a7b85454 broke opkg upgrade:
| update-alternatives: Error: cannot register alternative watch to
| /usr/bin/watch since it is already registered to /bin/watch
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removing the patch busybox-1.19.3-getty.patch is because it is already in the upstream.
Signed-off-by: Shane Wang <shane.wang@intel.com>
|
|
sed \
-e 's:bb.data.\(expand([^,()]*\), *\([^) ]*\) *):\2.\1):g' \
-i `grep -ril bb.data.expand *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Restore CONFIG_FEATURE_DATE_COMPAT so that all versions of 'date',
whether from busybox or coreutils, agree on the format when
setting the date from the command line.
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
interpretation.
Without 64 bit shell tests, the timestamp comparison in initscripts' bootmisc.sh throws 'out of range' errors.
With CONFIG_FEATURE_DATE_COMPAT, date reads the YYYYMMddhhmm string as hhmmYYYYMMdd when setting the time from the timestamp in bootmisc.sh.
Signed-off-by: James Limbouris <james@digitalmatter.com.au>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* We have various variables which are either not quoted at all or are half
quoted. This patch fixes the bad exmaples so everything is consistent.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* It's not used by the recipe and its creation
currently depends on CONFIG_HWCLOCK=y.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
|
|
Currently a process was being forked off for each individual file
this class wanted to inspect with rpmdeps. This converts it to use
rpmdeps-oecore which allows batch processing of these dependencies.
For do_package for perl, this reduced the time by about 1 minute (33%).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Flock is required by by pm-utils package to function properly
(/usr/lib/pm-utils/functions). It's shipped in both busybox and
util-linux. Both versions work fine with pm-utils. Enabling it
in busybox seems like simpliest solution for the problem.
Signed-off-by: Peter Tworek <tworaz666@gmail.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Busybox syslog includes functionality to drop duplicated syslog entries,
enable this feature in the defconfig yet disable it by default.
Expose configuration of the feature through the syslog-startup.conf file
and the syslog init script.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
This changes the default in syslog-startup.conf to log messages
to a file (/var/log/messages) because:
a) we already mount /var/log as a volatile mount by default
b) users are accustomed to looking at /var/log/messages as
most distributions don't ship with logread
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
It's possible to configure busybox syslog to only log messages above a
certain level, expose this functionality through the syslog-startup.conf
and syslog init script.
Valid values are 1-8 inclusive.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
Setting rotation size and generations is supported with busybox syslogd
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
This option has been disabled in busybox since 2007 as it was deemed too
buggy. See:
http://git.busybox.net/busybox/commit/?id=4998c818919477d90674a3f220e7407c26da17f9
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|