summaryrefslogtreecommitdiffstats
path: root/meta/recipes-core/busybox/busybox
AgeCommit message (Collapse)Author
2021-04-20busybox: fix CVE-2021-28831Chen Qi
Backport patch to fix CVE-2021-28831. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> (cherry picked from commit e579dbd9a6b2472ca90f411c0b594da9e38c9aca) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
2020-10-17busybox: add rev and pgrepakuster
Signed-off-by: akuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-07-22busybox: make hwclock compatible with glibc 2.31Sakib Sajal
settimeofday(2) has been deprecated as of glibc 2.31 which hwclock makes use of. This patch makes hwclock compatible with glibc v2.31 See patch for more details: busybox/0001-hwclock-make-glibc-2.31-compatible.patch Fixes [YOCTO #13981] Signed-off-by: Sakib Sajal <sakib.sajal@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-07-03busybox: 1.31.1 -> 1.32.0Andrej Valek
- update to last stable version 1.32.0 - remove and refresh already merged patches Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-05-07busybox: disable i2ctransferBartosz Golaszewski
I2C tools are built by default in busybox. OE-core on the other hand disables them all in the busybox defconfig except i2ctransfer. Since this looks like an oversight, this patch proposes to disable this tool as well. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-05busybox: sysctl: ignore EIO of stable_secret below /proc/sys/net/ipv6/confYi Zhao
Avoid confusing messages caused by EIO on reading /proc/sys/net/ipv6/conf/*/stable_secret if those are not set yet. Make it behave the same as procps(>=3.3.13). Fixes: $ sysctl -a | grep ipv6.conf | grep stable_secret sysctl: error reading key 'net.ipv6.conf.all.stable_secret': Input/output error sysctl: error reading key 'net.ipv6.conf.default.stable_secret': Input/output error sysctl: error reading key 'net.ipv6.conf.eth0.stable_secret': Input/output error sysctl: error reading key 'net.ipv6.conf.lo.stable_secret': Input/output error Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-02-15busybox: Backport patches to support removal of __NR_clock_gettimeKhem Raj
This helps compiling with musl on 32bit arches now that musl has switched to 64bit time_t Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-30busybox: Replace obsolete stime API with clock_settimeKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-07-18busybox: enable unicode supportMikko Rapeli
While creating and deleting files with unicode or other encodings works, it's annoying when ls and other core utils show questionmarks instead of the unicode characters. In 2019, it's quite common that users of embedded devices based on yocto need unicode support. Debugging a box with unicode encoded file names is a bit annoying when core utils from busybox don't support them. The unicode config fragment has the same config as Debian in their deb and udeb builds of version 1:1.30.1-4. If developers do not want this or other default yocto features in busybox, or optimize the configuration for size, then they likely run a completely custom configuration. Thus I think it's safe to enable unicode support by default. Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-07-03busybox: 1.30.1 -> 1.31.0Andrej Valek
- update to last stable version 1.31.0 - remove and refresh already merged patches Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-04-23busybox: fix ptest failure about 'dc'Chen Qi
Fix the following two failure of busybox ptest: FAIL: dc read FAIL: dc read string These two test cases relies on the functionalities enabled by CONFIG_FEATURE_DC_BIG. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-04-09busybox: Enable domain search list supportAlexey Brodkin
This option is enabled by default in Busybox and becomes useful in networks with internal resources becasue allows to use much shorter names. E.g. instead of "server.internal.company.com" it's possible to use just "server" if DHCP server is configured with: ---------------------------->8----------------------- option domain-search "internal.company.com"; ---------------------------->8----------------------- Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-02-25busybox: enable CONFIG_FLOAT_DURATIONAdrian Bunk
The 1.29.3 -> 1.30.1 upgrade lost support for sleep with float values (e.g. "sleep 0.1") since this replacement for CONFIG_FEATURE_FLOAT_SLEEP (enabled in thud) was missing. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-02-18busybox: 1.29.3 -> 1.30.1Andrej Valek
- update to last stable version 1.30.1 - remove and refresh already merged patches - re-generate defconfig Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-11busybox: Enable mountpoint and setsid appletsKhem Raj
This is needed by some init system services and if init system is not sysvinit then we dont have it, therefore its useful to have it provided via busybox as a backup Enable CONFIG_SETSID to get setsid, needed by runit Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-11-23busybox: check CONFIG_DESKTOP before using 'od -t' in test caseChen Qi
The '-t' option support for 'od' is enabled by CONFIG_DESKTOP. So check it before using it in test cases. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-23busybox: fix du-l-works test caseChen Qi
64 + 64 + 16 = 144K 144 + sizeof_a_directory >= 145 So fix to use 145 instead of 144. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-23busybox: use example.org instead of google.com in wget test caseChen Qi
Use example.org to ensure it's always reachible. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-23busybox: check uudecode before using it in test caseChen Qi
Check uudecode before using it in test case to avoid unexpected failure. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-23busybox: enable bzip2 by defaultChen Qi
bunzip2 is enabled by default, but bzip2 is not. This is kind of strange, and it also causes busybox's ptest failure regarding bunzip2, as bunzip2's test case needs bzip2 command. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-10-12busybox: move reboot out of init.cfgAnuj Mittal
reboot is needed for initramfs where no init manager is set. This partially reverts: commit b6fbb3f3d4d6367b0fd7921078f67057551c7ede Author: Chen Qi <Qi.Chen@windriver.com> Date: Mon Jul 30 17:41:57 2018 +0800 busybox: move init related configs to init.cfg Move init related configs to init.cfg. These config items do not make much sense unless busybox is selected as the init manager. They should belong to init.cfg. We would need to set up ALTERNATIVES for reboot in this case. Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-10-10busybox: fix conflict with runlevel appletAndrej Valek
- remove OE runlevel script which conflicts with busybox's applet - don't install empty directories Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-09-05busybox: update to 1.29.2Andrej Valek
- refresh busybox-udhcpc-no_deconfig.patch - remove obsolete patches which are included in this update - update defconfig - Add newly required virtual/crypt depends [RB] Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-08-14busybox: move init related configs to init.cfgChen Qi
Move init related configs to init.cfg. These config items do not make much sense unless busybox is selected as the init manager. They should belong to init.cfg. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-07-04busybox: Add patch to ignore -c on umount commandFabio Berton
Fix error when umounting filesystem on shutdown with a systemd distro. See more datails here: [https://github.com/systemd/systemd/issues/7786] (From OE-Core rev: ae23367c85d1a6c84c25736ac3c9a059acbc8dbe) Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-04busybox: Fix lzma segfaultsAndrej Valek
- fix multiple lzma segmentation faults - patch includes multiple fixing commits - test-cases have been removed due to binary data Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-04busybox: fix CVE-2017-15873Andrej Valek
Signed-off-by: Radovan Scasny <radovan.scasny@siemens.com> Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-01-19busybox: drop obsolete CONFIG_FEATURE_SYSTEMD reference from musl.cfgAndre McCurdy
From 1.25.0 onwards, busybox dropped systemd compatibility from its version of syslogd: https://git.busybox.net/busybox/commit/?id=accd9eeb719916da974584b33b1aeced5f3bb346 Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-12-10busybox: CVE-2017-16544Zhixiong Chi
In the add_match function in libbb/lineedit.c in BusyBox through 1.27.2, the tab autocomplete feature of the shell, used to get a list of filenames in a directory, does not sanitize filenames and results in executing any escape sequence in the terminal. This could potentially result in code execution, arbitrary file writes, or other attacks. Backport the patch from: https://git.busybox.net/busybox/commit/?id=c3797d40a1c57352192c6106cc0f435e7d9c11e8 https://nvd.nist.gov/vuln/detail/CVE-2017-16544 Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-11-05busybox: Fix CVE-2011-5325Andrej Valek
Signed-off-by: Radovan Scasny <radovan.scasny@siemens.com> Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-11-05busybox: 1.24.1 -> 1.27.2Andrej Valek
- fixed link creation to shell - reported bug with suid shells [https://bugs.busybox.net/show_bug.cgi?id=10346] - removed and modified already merged patches - updated defconfig regarding to new version Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Radovan Scasny <radovan.scasny@siemens.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-09-13busybox: using ip instead of ifconfig for ifup/ifdownYi Zhao
There is an issue for requesting dynamic IP with ifup/ifdown command when using dhclient. Steps to reproduce: 1. Build a full-cmdline image and install dhcp-client as the default DHCP client. 2. Configure a static IP for eth0 in /etc/networking/interfaces and reboot. $ ifconfig eth0 eth0 inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 $ ifdown eth0 3. Modify /etc/networking/interfaces to configure a dynamic IP for eth0 $ ifup eth0 $ ifconfig eth0 eth0 inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 You could see the eth0 still has a static IP. But actually it also has a dynamic IP: $ ip addr show eth0 eth0: inet 192.168.1.2/24 brd 192.168.1.255 scope global eth0 inet 128.224.162.173/23 brd 128.224.163.255 scope global eth0 The root cause is the ifdown invokes "ifconfig" to down the eth0 but doesn't remove its IP. The dhclient would invoke "ip" to configure the interface. It can not remove an IP from down interface with "ip addr flush" and "ip addr add" command can set multiple IPs on one interface. To fix this issue, we should use the "ip" command to implement ifup/ifdown, rather than using the older "ifconfig". It will flush the IP before down the interface. Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-06-12busybox: add backported patch to support iproute 'scope'André Draszik
This is needed for avahi-autoipd, which attempts to create a link-scope route as part of its work. Without iproute scope support in busybox, the route is not created due to an error message, and hence we aren't accessible by, and can't access ourselves, IP addresses outside the link-local scope (169.254.0.0/16) unless we also have a proper non link-local IP address, which somehow defeats the purpose of zeroconf. Signed-off-by: André Draszik <adraszik@tycoint.com> Reviewed-by: Stephane Ayotte <sayotte@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-06-09busybox: fix a linking issueMing Liu
A following linking error was observed: | ========== | archival/lib.a(tar.o): In function `tar_main': | archival/tar.c:1168: undefined reference to `unpack_Z_stream' | archival/tar.c:1168: undefined reference to `unpack_Z_stream' | ld: busybox_unstripped: hidden symbol `unpack_Z_stream' isn't defined | ld: final link failed: Bad value this happened with clang compiler, with the following configs: | CONFIG_TAR=y | # CONFIG_FEATURE_SEAMLESS_Z is not set which can be fixed by adding IF_FEATURE_* checks in. Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-05-29busybox: make SYSLOGD optionnalRomain Perier
Some distros might choose another syslogd provider like rsyslogd. update-alternative will update the link from syslogd to the right provider. However the syslogd feature is still present and enabled in busybox. This commit adds a new configuration fragment to make syslogd optionnal in busybox. Signed-off-by: Romain Perier <romain.perier@collabora.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-21busybox: fix typo in CVE-2016-2147_2.patch Upstream-Status tagAndre McCurdy
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-04-12busybox: In defconfig enable ASH_CMDCMD for built-in 'command'Nathan Rossi
It is common for *ash shells to have 'command' available as a built-in function. POSIX 2008 also documents the availability of this command. Additionally the /etc/profile of base-files requires this command to be available as of commit e77cdb7611 ("base-files: profile: Do not assume that the tty command exists"). If it is not available the following message is output during login on a image using busybox. -sh: command: not found It however should be noted that tcsh and csh do not provide 'command' (built-in or otherwise). Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-08busybox: Security fix BUG9071Martin Balik
Signed-off-by: Martin Balik <martin.balik@siemens.com> Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-08busybox: Security fix CVE-2016-6301Andrej Valek
ntpd: NTP server denial of service flaw CVE: CVE-2016-6301 Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-21busybox: ignore the largefile distro feature ( always enable LFS )Andre McCurdy
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23busybox: refresh the flock patchMaxin B. John
Upstream accepted the flock fix with some improvements. Backport those changes. Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-17busybox: add comments to separate Runit from SELinux content in defconfigRobert P. J. Day
There is no break in busybox's "defconfig" file to show where Runit settings suddenly morph into SELinux settings, so add some comments. (From OE-Core rev: 0fa590ed6c26aa065a9da8edbf65436fa1f6d04f) Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-12-16busybox: allow libiproute to handle table ids larger than 255Lukasz Nowak
These changes are required for compatibility with ConnMan, which by default uses table ids greater than 255. Signed-off-by: Lukasz Nowak <lnowak@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-30busybox: enable fractional sleep argumentsNathan Lynch
Fractional durations (e.g. 0.5s) for the sleep command are useful and not terribly uncommon in practice, especially in scripts associated with test cases (e.g. mdadm, lttng-tools). Enable FEATURE_FLOAT_SLEEP by default in order to avoid having to patch every instance of a script using a fractional sleep. The busybox binary gains a few hundred bytes in text (armv5e shown): $ size -x busybox.nosuid.{before,after} text data bss dec hex filename 0x89382 0x71d 0x2250 572655 8bcef busybox.nosuid.before 0x8954e 0x721 0x2250 573119 8bebf busybox.nosuid.after Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-14busybox: Avoid race building libbbJuro Bystricky
When building busybox, an occasional error was observed. The error is consistently the same: libbb/appletlib.c:164:13: error: 'NUM_APPLETS' undeclared (first use in this function) while (i < NUM_APPLETS) { The reason is the include file where NUM_APPLETS is defined is not yet generated (or is being modified) at the time libbb/appletlib.c is compiled. The attached patchset fixes the problem by assuring libb is compiled as the last directory. [YOCTO#10116] Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03busybox: fix "sed n (flushes pattern space, terminates early)" testcase failureDengke Du
It is a busybox upstream known bug. When the busybox sed sub-command 'n' hit the files EOF, it print an extra character that have been printed, but the GNU sed would not print it. In busybox source code ../editors/sed.c ------------------------------------------------------------------------ case 'n': if (!G.be_quiet) sed_puts(pattern_space, last_gets_char); if (next_line) { free(pattern_space); pattern_space = next_line; last_gets_char = next_gets_char; next_line = get_next_line(&next_gets_char, &last_puts_char, last_gets_char); substituted = 0; linenum++; break; } /* fall through */ /* Quit. End of script, end of input. */ case 'q': /* Exit the outer while loop */ free(next_line); next_line = NULL; goto discard_commands; ------------------------------------------------------------------------ when read at the end of the file, the 'next_line' is null, it would go "case 'q'" and goto discard_commands, the discard_commands would print the old pattern space which have been printed. So in order to comply with GNU sed, in case 'n', when the next_line is null I add "else" at the end of the second "if": "goto again;" and send it to the busybox upstream, the busybox maintainer adopt it and make a little changes to the patch, we can see it at: His reply: http://lists.busybox.net/pipermail/busybox/2016-September/084613.html The new patch on busybox master branch: https://git.busybox.net/busybox/commit/?id=76d72376e0244a5cafd4880cdc623e37d86a75e4 Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-20busybox: Add parallel make fixRichard Purdie
We're seeing regular parallel make failures in applet headers in busybox. This adds a patch to try and avoid the issue, building upon a fix already backported from upstream. The patch has been sent to upstream. [YOCTO #10116] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-18busybox: Backport makefile fix from upstreamRichard Purdie
This at least partially addresses one of the build races we've seen on the autobuilder in busybox. Its a straightforward backport from upstream. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-29busybox: don't build arRoss Burton
As it's not 1978 anymore, nobody is using ar for anything apart from static archives. If people are using static archives, then binutils provides a far more capable ar. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-29busybox: musl mips64 ip fixArmin Kuster
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-27 01:02:31 +0000