summaryrefslogtreecommitdiffstats
path: root/meta/recipes-core/base-files
Commit message (Collapse)AuthorAgeFilesLines
* base-files: Avoid problems if DISTRO_VERSION contains undefined variablePeter Kjellerstedt2019-01-201-1/+1
| | | | | | | | | | | | | | | | If DISTRO_VERSION is defined to some undefined variable, e.g., DISTRO_VERSION = "${FOO_VERSION}", and /bin/sh is dash, then do_install() would fail with an error such as: run.do_install.2945:193: run.do_install.2945: Syntax error: Unterminated quoted string This was due to unexpanded Python code making it into the shell code, confusing the shell parser. Reported-by: srinivasan <srinivasan.rns@gmail.com> Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* netbase/base-files: move /etc/hosts from netbase to base-filesChen Qi2019-01-082-1/+12
| | | | | | | | | Move /etc/hosts to base-files, and also add entry to it according to hostname setting. This fixes the problem of commands like `hostname -f' failing due to lack of such entry. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: change permissions on /sys and /procDan McGregor2018-10-181-2/+6
| | | | | | | | | | | | | The kernel mounts /proc and /sys with the mode 555. Fedora explicitly sets this value in its filesystem setup package. Debian doesn't seem to set it explictly. Having them be 755 causes permission issues on upgrades inside a container where the guest does not have the permission to change the modes of the mount points. So, just bite the bullet and force them to be 555. Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: fix handling of resizeChen Qi2018-08-142-5/+2
| | | | | | | | | | | | | The current handling of resize is incorrect. Using `resize > /dev/null 2>&1 && resize > /dev/null' will cause the second resize command to not execute because 'resize > /dev/null 2>&1' will fail for resize utility from busybox. What we really should do is just to check whether ${bindir}/resize is executable and execute it if so. Using '-x' is sufficient. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: profile: Avoid using "command" to determine if programs existPeter Kjellerstedt2018-07-261-8/+10
| | | | | | | | | | Since the existence of "command" in itself is not guaranteed, using it to determine if other executables exist is moot. Instead just run the executables and let the shell determine if they exist. By piping stderr to /dev/null we avoid unnecessary warnings in case they do not exist. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* base-files: respect VOLATILE_LOG_DIRChen Qi2017-08-171-2/+2
| | | | | | | | | | | Respect VOLATILE_LOG_DIR variable. In this way, if the user overrides this variable to be any valid boolean false value, /var/log on the final image would reside on persistent storage. [YOCTO #6132] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: ignore "mesg n" error messagesPatrick Ohly2017-07-171-1/+2
| | | | | | | | | | | | | | | | | | | | When using "su - myuser" to change from root to a non-privileged user, "mesg n" from the default .profile fails with "mesg: error: tty device is not owned by group `tty' or "mesg: cannot open /dev/ttyS0: Permission denied", depending on whether mesg comes from busybox or util-linux. This does not happen during a normal login because permissions on /dev/tty* get changed while doing that, something that isn't possible with plain "su -". As the error can't be avoided and failures of mesg probably aren't particularly important, now error messages get dumped to /dev/null. [YOCTO #11127] Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* base-files: profile: Simplify setting variables conditionallyPeter Kjellerstedt2017-05-161-8/+6
| | | | | | | | It is preferred to use `[ "$FOO" ] || ...` instead of `[ -z "$FOO" ] && ...` as the latter leaves $? set to 1. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* base-files: profile: Do not assume that the tty command existsPeter Kjellerstedt2017-04-082-7/+3
| | | | | | | | | | | This avoids the following error when logging in to a host that does not have the tty command: -sh: tty: not found Reported-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com> Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: profile: Whitespace clean upPeter Kjellerstedt2017-04-081-14/+15
| | | | | Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: resize only serial tty's in profileDaniel Díaz2017-03-311-1/+1
| | | | | | | | | | | | | | | | | | We don't want to run resize on non serial consoles. There's been an earlier attempt (6557787), so this builds upon that. The problem we're seeing is that if there is text buffered in the virtual console (like from a desperate user trying to enter login details), resize will get stuck while calling ioctl(tty, TCSETAW); Since serial consoles are named (not just numbered), this change limits resize's reach even further to run only on /dev/tty[A-z] (thus avoiding /dev/tty[0-9]). Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: Replace hardcoded root paths with appropriate bitbake variablesAmarnath Valluri2017-03-231-2/+3
| | | | | | | | /bin, /sbin, /lib are replaced with ${base_bindir}, ${base_sbindir} and ${base_libdir}. Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* base-files: do not write the current date into /etc/issue and /etc/issue.netAlexander Kanavin2017-03-111-2/+4
| | | | | | | | | This is causing a problem in multilib where base-files and lib64/32-base-files clash because they may have different dates. Also, if the package is coming from sstate it has an incorrect date anyway. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: remove True option to getVar callsJoshua Lock2016-12-161-1/+1
| | | | | | | | | | getVar() now defaults to expanding by default, thus remove the True option from getVar() calls with a regex search and replace. Search made with the following regex: getVar ?\(( ?[^,()]*), True\) Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* base-files: fix profile error under < /dev/nullRichard Tollerton2016-10-151-2/+4
| | | | | | | | | | | Previous attempts to constrain execution of `resize` to only TTYs did not properly handle situations when `tty` would return the string "not a tty". The symptom is "/etc/profile: line 34: test: too many arguments". Fix this by utilizing the exit code of `tty`. Also use `case` instead of `cut` to eliminate a subshell. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* base-files: don't export TZ="UTC" from /etc/profileAndre McCurdy2016-10-051-6/+0
| | | | | | | | | | | | | If no /etc/localtime (or /etc/TZ for uclibc) is found, then the libc will default to UTC, so setting UTC as a fallback default via the TZ environment variable is redundant. Since having the TZ environment variable set causes /etc/localtime to be ignored, it can cause confusion if /etc/localtime is added interactively after /etc/profile has been run. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: Add shell test quotingJussi Kukkonen2016-09-031-1/+1
| | | | | | | | tty can return "not a tt" which results in warnings when /etc/profile is executed. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: restrict resize to run on serial consoles only in profile │·bavery2016-08-101-3/+4
| | | | | | | | | | We don't need/wan't to run resize on an ssh connection. It's useless and it breaks the Eclipse SSH debug connection. So, we added a check. YOCTO #9362 Signed-off-by: bavery <brian.avery@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* base-files: Use SYSROOT_DIRS to add dirs to stage in sysrootPeter Kjellerstedt2016-05-131-4/+1
| | | | Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: add some safety checks in profileDiego Rondini2016-05-091-2/+4
| | | | | | | | | | | | | | | Add some safety checks when sourcing files in /etc/profile.d/, in particular: - source only *.sh files, not every file. This is the practice in use in both Fedora and Debian/Ubuntu (see https://help.ubuntu.com/community/EnvironmentVariables#A.2Fetc.2Fprofile.d.2F.2A.sh); - check the input is actually a file and is readable. This check is especially important if profile.d is empty, as "*.sh" will get expanded only if profile.d is not empty. Previously if profile.d was present but empty, "/etc/profile.d/*" was sourced causing errors on login and breaking stuff, for example X startup. Signed-off-by: Diego Rondini <diego.ml@zoho.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* readline: move inputrc into readlineJoseph A. Lutz2016-01-072-64/+1
| | | | | | | inputrc is the global configuration file for the readline library. Signed-off-by: Joseph A. Lutz <joseph.lutz@novatechweb.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* base-files: stage /etc/skelIoan-Adrian Ratiu2015-11-251-0/+4
| | | | | | | | | Having skel in the staging area lets other recipes access these files. For ex. recipes inheriting useradd, if passing "-m" to USERADD_PARAM, .bashrc and .profile are put automatically in $HOME, as expected. Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* base-files: Remove /proc/bus/usb from fstab.Andreas Oberritter2015-05-151-1/+0
| | | | | | | The usb filesystem was removed in Linux 3.5. Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: Check for /run and /var/lock softlinks on upgradeBryan Evenson2015-04-201-0/+24
| | | | | | | | | | | | | | Commit ea647cd9eebdc3e3121b84074519c4bb305adac9 moved the locations of /run and /var/lock to match the FHS 3 draft specifications. However, the install doesn't remove the existing directories. As a result, upgrading a system may result in /run as a softlink to /var/run and /var/run as a softlink to /run, creating a circular link. During pre-install, check for the existence of the old softlinks and remove them so the new directories can be installed. Signed-off-by: Bryan Evenson <bevenson@melinkcorp.com>
* base-files: clean up and clarify hostname logicRoss Burton2015-02-231-10/+9
| | | | | | | | Change the hostname logic the default value is ${MACHINE}, and explain how to change it. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files/profile: change EDITOR to not be busybox specificPaul Gortmaker2015-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | Setting "EDITOR=/bin/vi" breaks on non-busybox systems, as vim will populate /usr/bin/vi instead, and you get stuff like: op3:~/poky/meta-builder$ git commit -s error: cannot run /bin/vi: No such file or directory error: unable to start editor '/bin/vi' Please supply the message using either -m or -F option. op3:~/poky/meta-builder$ which vi /usr/bin/vi op3:~/poky/meta-builder$ Since we've already specified a proper path above in the profile, we've no need to call out where in the path vi lives, and hence this will work with busybox and a full vim install w/o busybox. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* base-files: avoid overwritting editable files during package updatingJian Liu2014-12-031-0/+1
| | | | | | | | | | | | | | Use CONFFILES to mark editable files as such, /etc/motd /etc/nsswitch.conf /etc/profile If there is no %config micro before the file name in the spec file, this file will be overwritten after updating package. This will make our settings lost. Signed-off-by: Jian Liu <jian.liu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* base-files: set dynamic COLUMNS via resize commandTing Liu2014-08-062-0/+8
| | | | | | | | | | By default, COLUMNS is set to 80. If possible, run 'resize' to determine what the current dimensions are. This avoids the final part of long lines overlap the start of the same line. Signed-off-by: Ting Liu <ting.liu@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: fix up misleading dir grouping names for lsb dirsPaul Gortmaker2014-07-291-9/+10
| | | | | | | | | | | | | | | | | | | | | | | In commit b0df35f47fb79dc149504bd66d1186b3276f9510 ("base-files: Add to make some directories needed by LSB.") there were new groupings of dirs made. But rather than keep the grouping names permissions based as they clearly were, it seems that it was unfortunately misinterpreted as a counter, simply incrementing as a new group was added. This leads to dir3755 getting chmod'd to 0755 and dir4775 being chmod'd to 2775 which to any new reader of the code is terribly confusing. Choose names that clearly reflect the permissions, and add a lsb suffix to indicate the role. Also note that the settings for /var/mail seem incorrect, and so they have been aligned with what is seen in most common distros. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: remove strange 2775 perms from dirs like /homePaul Gortmaker2014-07-291-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mark Hatle did the historical research into why this was so, and found that it originally was via debian import, and then it morphed over time: <fray> +# chown -R root:root ${D} <fray> +# cd ${D} && chown root:src usr/src <fray> +# cd ${D} && chown root:staff var/local <fray> +# cd ${D} && chown root:staff home <fray> + cd ${D} && chmod 755 `find . -type d` <fray> + cd ${D} && chmod 1777 `cat ${S}/debian/1777-dirs` <fray> + cd ${D} && chmod 2775 `cat ${S}/debian/2775-dirs` <fray> that was the original code <fray> so THAT is why they're 2775.. <fray> they were original 'src' and 'staff'.. which has gotten lost sometime in the last 10 years <fray> AND the origin: <fray> commit b45c9ed40bb4f893f99127a21776aef3ae888ad7 <fray> Author: Chris Larson <clarson@kergoth.com> <fray> Date: Tue Sep 30 16:30:41 2003 +0000 <fray> Add base-files 3.0.10 (from debian). <fray> thats where the brain damage started ... Debian in 2003.. Here we simply convert them to being normal 755 dirs. [YOCTO #6579] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: actually install 2775 dirs as 2775, not 2755Paul Gortmaker2014-07-291-1/+1
| | | | | | | | | Nothing interesting to see in the git history ; appears to have been this way since its creation. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: Don't export TZ if /etc/TZ existsRichard Tollerton2014-07-251-1/+1
| | | | | | | | | | | While glibc/eglibc looks for the time zone in /etc/localtime, other libc alternatives (e.g. uclibc) may look for it in /etc/TZ. If /etc/TZ exists, don't fall back to setting TZ to "UTC" in /etc/profile. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* PR bumps to remove PRINC use in meta-openpliMike Looijmans2014-04-241-1/+1
| | | | | | | Resolves warnings of this kind in the OpenPLi layer: WARNING: Use of PRINC * was detected in the recipe * Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: do_install.sigdata: remove the depends on DATERobert Yang2014-03-261-0/+1
| | | | | | | | | | | | | | | | | | If we run "bitbake -S base-files" today, and re-run it tomorrow with nothing changed, we would see that the do_install.sigdata changes because of: do_intall -> do_install_basefilesissue -> DISTRO_VERSION -> DATE We had set: IMAGE_NAME[vardepsexclude] += "DATETIME" in meta/conf/bitbake.conf, we can set a similar line in base-files_3.0.14.bb to fix the problem. [YOCTO #6032] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: use /dev/root in /etc/fstab for systemd supportJonathan Liu2014-03-211-1/+1
| | | | | | | | | | | | | | | | | systemd does not recognize "rootfs" in /etc/fstab so the root filesystem is not checked. As a result, the following message is logged by journalctl: systemd-fstab-generator[68]: Checking was requested for "rootfs", but it is not a device Changing "rootfs" to "/dev/root" in /etc/fstab allows systemd to check the root filesystem when the kernel is booted with the root filesystem mounted read-only. [YOCTO #5950] Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipes: bump PRsMartin Jansa2014-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * resolves following warnings: WARNING: Use of PRINC 17 was detected in the recipe meta-openembedded/meta-systemd/recipes-core/systemd/systemd-machine-units_1.0.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_0.12.10.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_git.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-multimedia/recipes-multimedia/sox/sox_14.4.0.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer-common.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe meta-smartphone/meta-android/recipes-bsp/chroot-script/chroot-script_1.0.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi-ui_0.6.31.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/bind/bind_9.8.1.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-serialgetty.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/screen/screen_4.0.3.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow-securetty_4.1.4.3.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow_4.1.4.3.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/libsdl/libsdl_1.2.15.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11-xserver.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-kernel/modutils-initscripts/modutils-initscripts.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-multimedia/libsndfile/libsndfile1_1.0.25.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-support/libcap/libcap_2.22.bb (or one of its .bbappends) WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-bsp/keymaps/keymaps_1.0.bb (or one of its .bbappends) WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-compat-units.bb (or one of its .bbappends) WARNING: Use of PRINC 12 was detected in the recipe openembedded-core/meta/recipes-core/initscripts/initscripts_1.0.bb (or one of its .bbappends) WARNING: Use of PRINC 13 was detected in the recipe openembedded-core/meta/recipes-core/base-files/base-files_3.0.14.bb (or one of its .bbappends) WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/navit/navit_svn.bb (or one of its .bbappends) WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-support/lvm2/lvm2_2.02.97.bb (or one of its .bbappends) WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-connectivity/portmap/portmap_6.0.bb (or one of its .bbappends) WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-extended/pam/libpam_1.1.6.bb (or one of its .bbappends) WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11.bb (or one of its .bbappends) WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-efl/recipes-efl/efl/entrance_svn.bb (or one of its .bbappends) WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb (or one of its .bbappends) WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-bsp/formfactor/formfactor_0.0.bb (or one of its .bbappends) WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi_0.6.31.bb (or one of its .bbappends) WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/dhcp/dhcp_4.2.5-P1.bb (or one of its .bbappends) WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-core/init-ifupdown/init-ifupdown_1.0.bb (or one of its .bbappends) WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb (or one of its .bbappends) WARNING: Use of PRINC 5 was detected in the recipe meta-openembedded/meta-oe/recipes-core/meta/distro-feed-configs.bb (or one of its .bbappends) WARNING: Use of PRINC 5 was detected in the recipe openembedded-core/meta/recipes-connectivity/bluez/bluez4_4.101.bb (or one of its .bbappends) WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-base.bb (or one of its .bbappends) WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-core-boot.bb (or one of its .bbappends) WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bb (or one of its .bbappends) WARNING: Use of PRINC 7 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/gpsd/gpsd_3.7.bb (or one of its .bbappends) WARNING: Use of PRINC 7 was detected in the recipe openembedded-core/meta/recipes-core/udev/udev-extraconf_1.0.bb (or one of its .bbappends) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: sed installed file instead of originalSaul Wold2014-02-281-1/+1
| | | | | | | | | | When we change the ROOT_HOME the sed regex does not match if we are running the do_install() a second time, so sed the installed file and preserve the original so that the sed regex is matched correctly in the original [YOCTO #5765] Signed-off-by: Saul Wold <sgw@linux.intel.com>
* recipes: convert remaining SUMMARY/DESCRIPTION cosmetic issues (part 2)Matthieu Crapet2014-02-201-1/+1
| | | | | | | | | | | | | | | Completes previous commit b5292d4115a4555a66b5e35acdc67dd71fb8577f. Updates SUMMARY[doc] (meta/conf/documentation.conf). Changes: - rename DESCRIPTION with length < 80 to (non present tag) SUMMARY - drop final point character at the end of SUMMARY string - remove trailing whitespace of SUMMARY line Note: don't bump PR Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* base-files: remove invalid entries from /etc/shellsMing Liu2013-10-262-7/+1
| | | | | | | | | It's more reasonable and secure to keep /etc/shells a minimal file, and then entries for valid shells be added dynamically to the system, only if the packages that provide them are supported. Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* base-files: remove the unnecessary /media/xxx directoriesChen Qi2013-07-022-7/+1
| | | | | | | | | | | | | | | | | A few directories under /media were created by default, /media/card, /media/ram, /media/realroot, etc. These directories actually have no real usage now, thus removing them. The /media/ram entry in the fstab is also removed, as mounting a tmpfs over /media/ram in our system brings no benefit. Note that a duplicate '/mnt' entry in dirs755 are also removed. [Yocto #4774] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* base-files: create /usr/lib/locale dirRoy.Li2013-06-251-1/+2
| | | | | | | | Lsbtest shows that /usr/lib/locale dir is lost, so create it Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: add /run directory from FHS 3 draft specificationJonathan Liu2013-05-292-5/+6
| | | | | | | | | | | | | | | | | This adds the /run directory from the Filesystem Hierarchy Standard 3.0 Draft [1] and refactors the filesystem as follows: - Remove creation of /var/volatile/run - Remove creation of /var/volatile/lock - Remove symbolic link from /var/run to /var/volatile/run - Remove symbolic link from /var/lock to /var/volatile/lock - Add symbolic link from /var/run to /run - Add symbolic link from /var/lock -> /run/lock - Add /run to /etc/fstab for sysvinit compatibility [1] http://www.linuxbase.org/betaspecs/fhs/fhs.html#runRuntimeVariableData Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* Revert "base-files: add fstab for systemd based systems"Andreas Oberritter2013-03-262-15/+1
| | | | | | | | | | | | | | For hybrid systemd/sysvinit builds, only one fstab can be used. The default fstab used by sysvinit should work fine with systemd. Since virtually every machine will ship its own fstab in its bsp layer, the bsp layer may decide how to override the fstab based on distro features. This reverts commit 77bbb839ba25b974a538b90d346b454ccd5deefd. Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
* base-files: fix 'dash' expanding '\n'Javier Viguera2013-02-251-1/+1
| | | | | | | | | | Dash's 'echo' command expands '\n' by default, so the '\n' is not included in the '/etc/issue' file. Use 'printf' for portability between different shells. Signed-off-by: Javier Viguera <javier.viguera@digi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: remove /var/cache from volatilesLaurentiu Palcu2013-02-061-2/+2
| | | | | | | | | Having the cache in tmpfs implies cache regeneration after every reboot. For an embedded device this might not be very efficient. So, it is better for the cache to be persistent between reboots. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: add fstab for systemd based systemsMartin Donnelly2013-01-202-1/+15
| | | | | | | | | | | The default fstab has entries which are not necessary in systemd based systems so add a simpler default in this case. Signed-off-by: Martin Donnelly <martin.donnelly@ge.com> Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: Remove the redundant "/"Lei Yang2013-01-071-2/+2
| | | | | | | | I'm working on my virt-test, when I check this file find it has redundant "/" Signed-off-by: Lei Yang <lei.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: use dynamic root home directoryKang Kai2012-12-252-2/+3
| | | | | | | Use var ROOT_HOME to configure root home directory dynamically. Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
* Replace "echo -e" with "printf" to have the same behavior in dash or bashAndrei Gherzan2012-09-201-4/+4
| | | | | | | | | | | | | | | | | | oe-core removed the prerequisite to have sh as bash. POSIX doesn't define any options and furthermore allows 'echo -e' to be the default behavior. This means that in dash 'echo -e' will actually print '-e' and interpret backslashes by default. We use instead 'printf' builtin command with or without '\n' to simulate 'echo -e' or 'echo -n'. 'printf' needs format while 'echo' can be used without any arguments. So 'echo >' was replaced by 'printf "" >'. 'echo' without '-n' flag adds a new line by default so to keep the same behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is used. [YOCTO #3138] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base-files: provide a mechanism to skip creation of the hostname fileMark Asselstine2012-09-121-6/+8
| | | | | | | | | | | | | The existence of a /etc/hostname file causes any hostname provided on the kernel command line or via dhcp to be overwritten by the initscripts 'init.d/hostname.sh'. This change allows you to set a value of "" for 'hostname' which will skip the creation of the /etc/hostname file by the base-files package. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>