summaryrefslogtreecommitdiffstats
path: root/meta/lib
AgeCommit message (Collapse)Author
2019-12-18oeqa: reproducible: Test core-image-sato and core-image-full-cmdlineJoshua Watt
Adds core-image-sato and core-image-full-cmdline to the list of images that the reproducible build test builds. Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-18sysklogd: update to 2.0.3Alexander Kanavin
Drop all patches as they are no longer necessary with autotools, fix problems that are addressed upstream, or (in case of no-vectorization.patch) don't apply to the old version either, which means no one is using that hw target anymore. Remove custom systemd configs (provided by upstream), and custom syslog config (also provided by upstream but not installed by default). Adjust parselogs to not error out on not being able to find System.map file during boot (that is packaged into kernel-dev and is not normally installed). License-Update: various tweaks; the license terms are the same. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-16incompatible_lic.py: Add tests for incompatible licenses with wildcardsPeter Kjellerstedt
Suggested-by: Quentin Schulz <quentin.schulz@streamunlimited.com> Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-16license_image.bbclass: Report only the licenses that are incompatiblePeter Kjellerstedt
Instead of reporting ${LICENSE} when a package cannot be installed into an image because it is using an incompatible license, report the license(s) that are actually incompatible. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-16base.bbclass: Report only the licenses that are incompatible for a packagePeter Kjellerstedt
Instead of reporting ${LICENSE} when a package is identified as using an incompatible license, report the license(s) that are actually incompatible. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-16license.bbclass: Introduce AVAILABLE_LICENSES that lists all licensesPeter Kjellerstedt
Previously, there was SRC_DISTRIBUTE_LICENSES, an undocumented variable that contained a static list of licenses. It was used by expand_wildcard_licenses() to expand any wildcards used in, e.g., INCOMPATIBLE_LICENSE. However, since this static list of licenses has not been kept up-to-date, many licenses were missing, with the result that if one tried to use any of those licenses with a wildcard, no licenses would be found, effectively ignoring that they should be marked as incompatible. This introduces a new (documented) variable, AVAILABLE_LICENSES, that is automatically updated to contain all licenses found in any directories specified by ${COMMON_LICENSE_DIR} and ${LICENSE_PATH}, and uses it instead of SRC_DISTRIBUTE_LICENSES when expanding wildcards. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-16oeqa/runtime/apt dnf opkg: support running from within docker containerAndré Draszik
If the user specified an http port to use for serving files, use that instead of a random one. At the same time, have the http server bind to all interfaces. Binding to the server_ip might not always be possible, e.g. in the case of running bitbake / oeqa from within a docker container. In this case, the ip address is valid outside the container, but not inside, and hence can't be bound to. So switch to simply binding to all interfaces. Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-16oeqa/target/ssh oeqa/target/qemu: expose server listening port to testsAndré Draszik
Allow tests to access the listening port as just introduced. Note that when using qemu this infrastructure shouldn't be needed, but we still need to set the port to 0 so that a listening port is determined automatically (e.g. by the python http server). Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-16oeqa/runtime/context.py: support listening port in TEST_SERVER_IPAndré Draszik
Similar to the existing possibility to specify a port in TEST_TARGET_IP, allow TEST_SERVER_IP to also contain a port. The intention is for this port to be passed into e.g. the http server from the apt / dnf / opkg tests, or any other (custom) tests that might need the target to connect to a service spawned by bitbake / oeqa, where bitbake is actually running inside a docker container. Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-16oeqa/utils/httpserver: allow to pass in listening portAndré Draszik
Being able to specify the listening port is useful when running OEQA from within a docker container, e.g. crops or any other solution. In that case, a port on the outside must be mapped to a specific port inside the container. If no port is specified for the http server module in this case, the http server would choose a random port, which is unlikely to be mapped and thus won't be reachable from the outside. Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-16sstatesig: Further optimiseRichard Purdie
Optimise the call into the parent function to be only when needed. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-15sstatesig: Optimise get_taskhash for hashequivRichard Purdie
With hashequiv the get_taskhash function is called much more regularly and contains expensive operations. This these don't change based upon hash in a given build, improve the caching within the function to reduce overhead. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-15oeqa: qemu: ensure we print runqemu output in the event of failurePaul Eggleton
If we get here in the code it's because runqemu has failed, this is not a debug situation - we need to see the output, so print it as an error. Fixes [YOCTO #13681]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-15oeqa: qemu: fix width of top output in host dumpPaul Eggleton
If runqemu fails, there is some logic to run a set of commands to dump various bits of information that might help debug the issue (particularly in a busy situation such as on the autobuilder). One of those commands is "top -bn1", however top restricts the output to the width of the calling terminal, and for whatever reason this is a little restrictive when called from inside testimage, so set COLUMNS in the environment to a high value to fix it. (Another way is to use the -w option, but that is not supported by our default busybox configuration so it will then fail when this same list of commands is used on the target). Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-15oeqa: qemu: ensure that host dump commands can be run properlyPaul Eggleton
If runqemu fails, there is some logic to run a set of commands to dump various bits of information that might help debug the issue (particularly in a busy situation such as on the autobuilder). However, when we try to run these we are inside the normal build environment which restricts commands to be run on the host to those specified in HOSTTOOLS. Since this isn't a place where host contamination is going to be a problem, override PATH to a reasonable default so that we run the actual host tools directly to avoid the issue. (Logically we would want to use the original PATH value here, but it is not easily accessible.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-09oeqa/selftest/runtime_test: split systemd and sysvinit tests outArmin Kuster
This should help debug which part of this selftest is failing. We can not tell which outloop is failing so split the tests into systemd and sysvinit. [YOCTO #13650] Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-09selftest: skip virgl gtk/sdl test on opensuse 15.0Alexander Kanavin
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-05oeqa/qemurunner: Fix cmdline variable use before referenceRichard Purdie
This avoids some tracebacks we've seen on failed autobuilder builds which would allow the real error to be seen. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-05oeqa/concurrencytest: Optimise for autobuilder/clobberdirRichard Purdie
We're seeing huge delays on the autobuilder during oe-selftest builddir deletion. For example there is a currently running selftest we could do with the results from and its been going 13 hours, at least 8 of which was in deletion of the builddirs. There are a variety of ways we could solve this problem however the autobuilder has a mechanism for deferred deletion, "clobberdir" which it already uses for this kind of work. Whilst in general hardcoding things like this is horrible, I believe in this case the benefits (and resulting improvements on my sanity if nothing else) mean this is a case where we should do it. If/as/when someone can come up with a better solution that is fine and this can be replaced. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-12-04selftest/imagefeatures: blacklist zstRoss Burton
The dependency isn't in OE-Core so we need to disable this test. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-28oe-selftest: extend virgl gtk test to also check the SDL optionAlexander Kanavin
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-27oeqa: archiver: Add basic tests for all archiver modesPaul Barker
6 new test cases are added to cover the various archiver modes documented at the top of archiver.bbclass. Each test sets the appropriate configuration options, runs the `do_deploy_archives` task for the selftest-ed recipe and checks for the presence of the expected archive file. Signed-off-by: Paul Barker <paul@betafive.co.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-27wic: 'wic cp' to copy from imageChee Yang Lee
currently 'wic cp' only works for copy file from local storage to wic image. enhance 'wic cp' to copy file/directory from wic image to local storage. include selftest and 'wic help' updates. [YOCTO#12169] Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-27oeqa/selftest/cases/gcc.py: Split 'gcc' and 'g++' testsuitesNathan Rossi
Split the GccCrossSelfTest testcase into separate testcases for 'gcc' and 'g++' respectively. In order to split them use the "check-gcc-*" language make check targets. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-27oeqa/utils/qemurunner.py: Handle QEMU machines with a single serialNathan Rossi
Not all QEMU machines are capable of having more than one serial port, this is due to the machine emulating a physical device/board. Rework QemuRunner to handle machines that only have 1 serial port, where the serial port shares output of the kernel log buffer and a login console. In this case the output is mixed but enables the machine to boot and have QemuRunner detect the login prompt. QemuTarget uses SERIAL_CONSOLES to determine the number of available serial ports. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-22oeqa/selftest/sstatetests: Ensure we don't use hashequiv for sstatesigs testsRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-21selftest: check that 'devtool upgrade' correctly drops backported patchesAlexander Kanavin
There was a regression in this functionality that went unnoticed due to lack of tests. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-21oeqa/devtool: Avoid unbound variable errorsRichard Purdie
inherits can be unset resulting in: UnboundLocalError: local variable 'inherits' referenced before assignment which can mask real errors. Avoid this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-21/oeqa/manual/compliance-test: remove obsolete testArmin Kuster
ltpstress was removed in Oct 2018 https://github.com/linux-test-project/ltp/commit/e752f7c19674d9b2f7d37aed123561a3f6410e97#diff-5231627fc8640e0adb955f9e69c3c08d Remove LTP stress tests ltpstress.sh runs stress.part[1-3]. But these runtest files just duplicate definitions: * stress.part1: fs, mm, nfs * stress.part2: ipc, math, nptl * stress.part3: net.multicast, pty, syscalls The definitions are outdated anyway. There is no point trying to keep them sync. Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-21oeqa/manual/compliance-test: move crashme to runtimeArmin Kuster
[v3] remove fork12 from crashme. runs forever missed in v2 resend Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-21oeqa/manual/compliance-test: remove crashme testsArmin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-21manual/bsd-hw: remove bash testsArmin Kuster
done as part of IncompatibleLicensePerImageTests Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-21oeqa/manual/bsp-hw: remove usb and SDmicro testsArmin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-21oeqa/manual/bsp-hw: move storage tests to runtimeArmin Kuster
move usb mount, r/w and umount tests to runtime move SD card mount, r/w and umount tests to runtim Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-21oeqa/manual/bsp-hw: remove reboot testArmin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-21oeqa/runtime/boot: add reboot testArmin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-21oeqa/manual/bsp-hw: remove rpm -ivh testArmin Kuster
done via runtime def test_rpm_install(self): Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-21selftest/wic: test wic rm with -r flagChee Yang Lee
selftest to make sure wic rm with -r flag for ext partition could remove directory and all its content. Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-14oeqa/manual/oe-core: remove crosstab test from manualArmin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-14oeqa/selftest/runtime_test: add crosstab selftestArmin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-14oeqa/manua/oe-core: remove manual PACKAGECONFIG_FLAGS testsArmin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-14oeqa/selftest/oescripts: move list-packageconfig-flags tests from manual to selfArmin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-14oeqa/manual/bsp-qemu: remove manual useradd testArmin Kuster
useradd tested is done via: test_non_root_user_can_connect_via_ssh_without_password and test_non_root_user_can_connect_via_ssh_without_password Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-14oeqa/manual/bsp-qemu: remove manual bash testArmin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-14oeqa/manual/bsp-qemu: remove postinit test done w/selftest runtimeArmin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-14oeqa/manual/bsp-qemu: remove only_one_connmand_in_background test done at ↵Armin Kuster
runtime Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-14oeqa/manual/bsp-qemu: drop xserver test done at runtimeArmin Kuster
xserver testing is done at runtime and selftest via sato image Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-14oeqa/manual/bsp-qemu: remove KVM enabled which is already done in selftest ↵Armin Kuster
runqemu Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-14oeqa/manual/bsp-qemu: remove rpm tests already done in runtimeArmin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-14oeqa/core: Add qemu checksArmin Kuster
Some test should not be run in QEMU systems so add some checks to make that easier Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-18 01:10:44 +0000