| Age | Commit message (Collapse) | Author |
|---|
|
For the same reasons as the runtime Python test, clean up the SDK test.
Also port from Python 2 to Python 3, as that's what is supported now.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently this is three test cases:
1) test_python_exists. Fail if python3 isn't in PATH.
2) test_python_stdout. Run a Python script and check the output is as expected
3) test_python_testfile. Check that a file test_python_stdout wrote to exists.
(1) should be a setup and skip the test module if it isn't present.
(2) and (3) should be merged, there's no point copying over a two line Python
file, and the test doesn't verify that the file doesn't exist in the first
place.
Rewrite the test to check that Python is present in a class setup so the entire
test is skipped if it isn't and do some simple rot13 to verify that bytecode is
being executed correctly.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The FILELIST field of the package info file in the buildhistory
repository is a space-separated list of all of the files in the package.
If a name of a file packaged by a recipe contains a space character then
of course the result was that we didn't handle its name properly. To fix
that, use quotes around any filename containing spaces and at the other
end use these quotes to extract the proper entries.
Fixes [YOCTO #12742].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The original idea here was that changes to certain fields might be able
to be explained if there was a change to another field, for example if
RDEPENDS changed it might be because DEPENDS changed. Thus we were
printing this kind of thing out with each change. Unfortunately in
practice this turned out to be noisy and not particularly useful, so we
might as well remove it.
Fixes [YOCTO #7336].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These platform specifc BSPs were removed from meta-intel and superseded by
intel-core* BSPs.
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Checking if the dependency had any failure is unreliable, for example
if the underlying data doesn't get transferred and the list is empty,
success of the dependency is assumed.
Since we now have success data available, change the code to use it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This uses the new concurrenttest code to enable parallel test execution
if specified.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This isn't present on modern distros by default and doesn't work with
testtools, needing multiple code paths in the code. Remove it in favour
of finding a better replacement for results collection/analysis.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There doesn't appear to be any reason we need this _results indirection
any more so remove it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have several options for parallel processing in oeqa, parallel
execution of modules, threading and mulitple processes for the runners.
After much experimentation is appears the most scalable and least
invasive approach is multiple processes using concurrenttestsuite
from testtools. This means we can drop the current threading code
which is only used by the sdk test execution.
oeqa/decorator/depends: Remove threading code
Revert "oeqa/sdk: Enable usage of OEQA thread mode"
This reverts commit adc434c0636b7dea2ef70c8d2c8e61cdb5c703b1.
Revert "oeqa/core/tests: Add tests of OEQA Threaded mode"
This reverts commit a4eef558c9933eb32413b61ff80a11b999951b40.
Revert "oeqa/core/decorator/oetimeout: Add support for OEQA threaded mode"
This reverts commit d3d4ba902dee8b19fa1054330cffdf73f9b81fe7.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows oe-selftest to take a -j option which specifies how much test
parallelisation to use. Currently this is "module" based with each module
being split and run in a separate build directory. Further splitting could
be done but this seems a good compromise between test setup and parallelism.
You need python-testtools and python-subunit installed to use this but only
when the -j option is specified.
See notes posted to the openedmbedded-architecture list for more details
about the design choices here.
Some of this functionality may make more sense in the oeqa core ultimately.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This improves test parallelism.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Only show the output in the failure case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows better parallelism between the different tests as currently
this block takes the longest time to execute. devtool tests are still
all grouped into the "devtool" module for ease of exection.
This also makes it easier to execute some subset of devtool tests for
testing devtool changes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently some tests run in buffer mode and some don't. Those that don't can
corrupt stdout/stderr. Switch to using buffer mode everywhere so we're consistent.
If there is useful output on stdout/stderr, it will be displayed if the test
fails.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
AssertionError: Command 'wic create mkhybridiso --image-name core-image-minimal -o /var/tmp/wic.oe-selftest/' returned non-zero exit status 1:
ERROR: _exec_cmd: gzip -f -9 -c /var/tmp/wic.oe-selftest/tmp.wic.drhn6edm/initrd.cpio > /var/tmp/wic.oe-selftest/tmp.wic.drhn6edm/initrd.cpio.gz returned '1' instead of 0
output: gzip: /var/tmp/wic.oe-selftest/tmp.wic.drhn6edm/initrd.cpio: No such file or directory
This is because in a clean build directory, the initramfs may not be rebuilt.
Add a call to ensure it is built to avoid the error.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using /var/ leave wic open to races with other processes on the system, use
a subdir of builddir instead to avoid this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If dbus isn't build first the dbus dependency of dbus-wait can't be detected
through pkgconfig and the test fails:
AssertionError: {'DEPENDS': {'dbus'}} != {}
- {'DEPENDS': {'dbus'}}
+ {} : Some expected variables not found in recipe: {'DEPENDS': {'dbus'}}
Ensure dbus is built and present in the sysroot.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The main setUp function needs to be called and tests are meant to
define setUpLocal. For some reason this one didn't leading to errors
with recent code changes. Fix it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current code assumes if something isn't a failure of some
kind, it was a pass. When test case IDs weren't matching, this lead
to very confusing output where things would fail, then be listed as
passing.
This adds code to track successes, ensuring we don't end up in this
position again with unmatched entries being listed as UNKNOWN.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By having a consistent config for the test, a second reparse is avoided
and the test runs slightly faster.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If something goes wrong with the test, dep can be undefined. Avoid a
traceback for this and handle it more gracefully.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We can directly compare the test case IDs rather than representations,
then if we're using subunit to split the tests, the comparisions still
work as intended.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
"allow root login" should not be bundled in ssh_allow_empty_password,
because some distro may want only one of "allow root login" and "allow
empty password", so split it out into ssh_allow_root_login and add new
imagefeature allow-root-login so they can be controlled separately,
debug-tweaks will still include both of them.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is helpful when exclude a lot of layers. It uses python re, and
supports multiple patterns (separated by space).
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The following error message when starting core-image-weston is not
critical as long as the image could start up correctly. So extend
the common_errors list for parselog.py test case to ignore this
message.
logind: cannot setup systemd-logind helper (-61), using legacy fallback
[YOCTO #12835]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is better to return False for None. E.g. checking an undefined
variable returned d.getVar().
Signed-off-by: Binghua Guan <freebendy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is a function much like shutil.which or bb.utils.which, retaining
shutil.which-like function semantics, bb.utils.which's support for
returning available candidates for signatures, and most importantly,
supports wildcards, returning only the first occurrance of each found
pathname in the search path.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If we're in a multilib context already and want a non-multilib context
this function returned incorrect values.
Try and retain optimisations for the common case not needing to request
a datastore but allow the different multilib/non-multilib combinations
to work too.
This fixes bugs where rootfs generation of a multilib image would
write into incorrect locations, or be unable to find sstate manifest
files due to incorrect data stores being used to expand data.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently this function assumes that no multilib is applied and that
we're applying a multilib. This means if we're in multilib context
and want the non-multilib context we can't obtain it (and no other
function exists for this either).
Improve the function to allow this to be requested.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds a test that creates a layer, adds it to bblayers.conf, then ensure
that it appears properly in bitbake-layers show-layers.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As of commit 2c5c6e3ff we create multilib variants of intercept
hooks but we did not account for delay_to_first_boot variants.
This was covered up until commit a335e7867, but will now cause
an error.
Signed-off-by: Joe Slater <joe.slater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We are going to let runtime test support kernel tests. Now we just add
kernel self-contained sample tests. And we plan to add overall kernel
tests in the future.
This patch is just add kernel samples test which contains about 13 tests
enabled by kernel-sample.scc. So it needs statement,
KERNEL_FEATURES_append += " features/kernel-sample/kernel-sample.scc" in
local.conf.
Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The path to where the layer was being created was taken verbatim as the
name of the layer when generating the layer.conf and README files from
templates. This causes problems in the layer.conf file because it would
result in strangely named variables like
BBFILE_PATTERN_../my-layer = "..."
Instead of blindly taking the path, use the name of the last component
of the path as the layer name.
Additionally, rework the template files to use python format strings
with named parameters so that the same argument doesn't have to be
repeated multiple times.
[YOCTO #12808]
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add an automated test to exercise that fetching a git: recipe...
1) works over git without mirrors
2) fails without git connectivity or mirrors
3) works without git connectivity but with a mirror
(2) is done by setting GIT_PROXY_COMMAND to 'false' which should break any git
network operations.
[ YOCTO #12805 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Exception: TypeError: boolean accepts a string, not '<class 'bool'>
is a bit annoying if you pass in True/False. Tweak the function
to make it forgive that situation.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Derive the value for template layer.conf from core layer and add
dependendency on it too.
Fixes [YOCTO #12767]
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously a warning was printed regardless of context and nature
of the failure, and because it was only a warning, it was mostly ignored.
Now, the following is considered when a failure happens:
1) whether we are installing packages into a target image, or populating
a SDK with host or target packages.
2) whether the failure was due to qemu not supporting the target machine.
Accordingly, warnings, notes, and failures are printed, and postponing
to first boot happens if possible.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
present
If package management is present opkg/dpkg will bring the original
copy of the postinsts scripts with the metadata and will be able to
handle postinsts just fine. In fact, it is preferred to let package
management handle the postinsts scripts in this case since it will
keep the package managers database up-to-date too. The run-postinsts
scripts will make sure the package manager gets invoked instead of
the scripts directly.
Note: Before commit 5aae19959a44 ("rootfs.py: Change logic to
unistall packages") rootfs.py did not install /etc/$pm-postinsts
too. It is not clear whether that change was intentionally or just
a bug. This commit fixes/reverts that aspect of the commit.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test cases assume that rpm-doc is built out, as it says it its
comment. This is not always true. And it sometimes results in
following error.
| cls.tc.target.copyTo(test_file, dst)
| UnboundLocalError: local variable 'test_file' referenced before assignment
Change to use base-passwd-doc, as this package is more likely to be
built out than rpm-doc.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The following message from watchdog is not an error.
"error retry time-out = 60 seconds"
Checking watchdog's source codes, we have:
src/watchdog.c: log_message(LOG_INFO, "error retry time-out = %d seconds", retry_timeout);
It's clear this is an info message, so parselogs should ignore it.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the following line to common_errors list.
Failed to read /var/lib/nfs/statd/state: Success
This message is not harmful, it does not result in rpc.statd starting
failure.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When generating the extended SDK, there is a copy step where this class
goes through the layers and other stuff that have been copied to
generate the SDK. The corebase; ie. the folder that contains the core
layer 'meta' is treated in a special way. Unfortunately in our tree, we
have:
sources/meta/meta
| `- core layer
`------- corebase
In populate_sdk_ext's copy_buildsystem, the heuristic to determine which
element of the list returned by copy_bitbake_and_layers is corebase is
fooled by such layout.
In copy_bitbake_and_layers, corebase is already handled specifically and
reliably, so we should let that function tell us which folder is
corebase instead of trying to determine it.
To do so, change the return type of copy_bitbake_and_layers to a tuple
that contains (corebase, copied_layers). It also simplifies the code on
the caller side.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add version field in recipe name for example recipe created by
bitbake-layers.
Fixes [YOCTO #12767]
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The test works by excluding curl-dev which curl-staticdev depends upon.
When static libraries aren't disabled, this leads to an odd looking test
failure.
Simply exclude curl-staticdev as well in case its enabled to make sure
the test always works.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As I will be leaving Intel, this address will no longer be valid,
so swap it for my personal one for now.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When running testimage task for core-image-sato-sdk, the following
error appeared.
UnicodeDecodeError: 'utf-8' codec can't decode byte 0x82 at position 0: invalid start byte
Checking the codes, I found it's caused by setting a 1024 limit for the
read method of the StreamReader object.
Comments from the manual:
"""
The chars argument indicates the number of decoded code points or bytes to
return. The read() method will never return more data than requested, but
it might return less, if there is not enough available.
"""
When running `systemctl status --full' on target, this error occurs.
This patch increase the bytes limit to 4096 to fix the error.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test_file_connman should be executed only when 'lib32-connman' is
installed and 'connman' is not installed.
When lib32-connman and connman are both installed, the /usr/sbin/connmand
could be from connman or lib32-connman, depending on the installation
order. What we want to check is the connmand command from lib32-connman,
so we need to make sure that connman is not there to cause chaos.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1) The test cases use 'readelf' command to do the check. This command
is from binutils. So skip the test if the needed binutils package is
not installed.
The related error message in log.do_testimage is like below.
Output: sh: readelf: not found
2) The test case tests /lib/libc.so.6 from lib32-libc6. So skip the test
if lib32-libc6 is not installed.
The related error message in log.do_testimage is like below.
Output: readelf: Error: 'lib/libc.so.6': No such file
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Ross Burton
Paul Eggleton
Anuj Mittal
Richard Purdie
Jackie Huang
Robert Yang
Joshua Watt
Chen Qi
Binghua Guan
Christopher Larson
Joe Slater
Hongzhi.Song
Alexander Kanavin
Stefan Agner
Damien Riegel