| Age | Commit message (Collapse) | Author |
|---|
|
When two or more tests had the same name but different classes then
the decorator log whould have the output all wrong. This was because
a comparison which was made only between method names but now it
compares classes too.
[YOCTO #8029]
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if qemu segfaults, the tests merrily continue trying to execute
which takes time for them to timeout and is a bit silly. Worse, no logs about
the segfault are shown to the user, its silent!
This patch tries to unravel the tangled web of issues and ensures that we:
* install a SIGCHLD handler which tells the user qemu exited
* check if qemu is running, if it isn't fail the test outright
* don't leave processes behind in sshcontrol which would hold
bitbake.lock and block shutdown
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a test case is decorate by oeqa.utils.decorators.tag, this case will
by add a tag, testrunner will filter these tags by TEST_SUITES_TAGS
[YOCTO #7849]
Signed-off-by: zjh <junhuix.zhang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of hardcode paths (/rpm/, /ipk/, /deb/), use a user-defined prefix
when creating the URI feeds. URIs now will have the following syntax:
PACKAGE_FEED_URIS_1/PACKAGE_FEED_PREFIX
PACKAGE_FEED_URIS_2/PACKAGE_FEED_PREFIX
.
where PACKAGE_FEED_URIS = "PACKAGE_FEED_URIS_1 PACKAGE_FEED_URIS_2 ...."
[YOCTO #5407]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If packages are conveyed to smart to install at the same time,
conflicts will not happen.
Try to install packages into sdk image at the same time.
This patch is not so perfect. For example,
IMAGE_INSTALL += "lib32-ncurses"
IMAGE_INSTALL += "ncurses-dev"
ncurses-dev and lib32-ncurses-dev will have conflicts during packages installation.
Signed-off-by: Jian Liu <jian.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This changes the behavior when data was not received over
the serial console when a command is run. With this the
socket is no longer closed but it throws and exception that
can handled in upper layers. With this the test can continue
without throwing errors for not having the socket anymore.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Renamed this function as it's too generic name for it.
It writes variables, which are used by wic to .env file,
so _write_wic_env is better name for it.
Thanks Christopher Larson for poining out to this.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added test cases to build qemux86_directdisk, mkgummidisk and
mkefdisk images.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added MACHINE_FEATURES and IMAGE_FSTYPES variables to the build config
to ensure that bootimg and efi artifacts are built. This is needed to
build canned wic images that are using those artifacts.
Introduced class variable Wic.image_is_ready to avoid building image
more than once. It would be better to build image in setUpClass, which
is called only once, but add_config method can't be called in class method,
so we have to use this trick with class variable in setUp method.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change makes it possible to create GPG signed RPM package feeds -
i.e. package feed with GPG signed metadata (repodata). All deployed RPM
repositories will be signed and the GPG public key is copied to the rpm
deployment directory.
In order to enable the new feature one needs to define four variables in
bitbake configuration.
1. 'PACKAGE_FEED_SIGN = "1"' enabling the feature
2. 'PACKAGE_FEED_GPG_NAME = "<key_id>"' defining the GPG key to use for
signing
3. 'PACKAGE_FEED_GPG_PASSPHRASE_FILE = "<path_to_file>"' pointing to a
file containing the passphrase for the secret signing key
4. 'PACKAGE_FEED_GPG_PUBKEY = "<path_to_pubkey>"' pointing to the
corresponding public key (in "armor" format)
The user may define "GPG_BIN" in the bitbake configuration in order to
specify a specific the gpg binary/wrapper to use for signing.
[YOCTO #8134]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch adds a new bbclass for generating rpm packages that are
signed with a user defined key. The packages are signed as part of the
"package_write_rpm" task.
In order to enable the feature you need to
1. 'INHERIT += " sign_rpm"' in bitbake config (e.g. local or
distro)
2. Create a file that contains the passphrase to your gpg secret key
3. 'RPM_GPG_PASSPHRASE_FILE = "<path_to_file>" in bitbake config,
pointing to the passphrase file created in 2.
4. Define GPG key name to use by either defining
'RPM_GPG_NAME = "<key_id>" in bitbake config OR by defining
%_gpg_name <key_id> in your ~/.oerpmmacros file
5. 'RPM_GPG_PUBKEY = "<path_to_pubkey>" in bitbake config pointing to
the public key (in "armor" format)
The user may optionally define "GPG_BIN" variable in the bitbake
configuration in order to specify a specific gpg binary/wrapper to use.
The sign_rpm.bbclass implements a simple scenario of locally signing the
packages. It could be replaced by a more advanced class that would
utilize a separate signing server for signing the packages, for example.
[YOCTO #8134]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently it is not possible to run a exported test,
but this patch will allow to use the HosDumper class
when running a exported test, otherwise the HostDumper
class will break runexpored test.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds an instance of HostDumper to qemurunner,
with this instance now is possible to get dumps
from the host when there is an error.
This adds dump points in the next cases:
- runqemu exits before seeing qemu pid
- Fail to get qemu process arguments
- Not reach login banner before timeout
- qemu pid never appears
This also modifies the constructors of BaseDumper,
HostDumper and TargetDumper, they don't require
the datastore anymore, but the feature to replace
datastore variables has been lost (never used)
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes required:
- Rename opkg-cl to opkg
- Add libarchive dependency
- Drop backport patches
- Drop obsolete directory options
- Add patch to handle empty index files
Based on initial work by Paul Barker.
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
CC: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added test case to test functionaly of build-image plugin:
Add two packages to workspace and run 'devtool build-image
core-image-minimal'.
Checked if command is successful.
Checked if expected package is added to generated
core-image-minimal.bbappend file.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
This test case fails on qemu machines as not all expected bitbake
variables are present in .env file.
Fixed by filtering out optional variables.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
"allarch" targets should be MACHINE invariant. This means their sstate
signature should not change regardless of which MACHINE is built.
Errors keep creeping in around this area so automating this as part
of self test seems the best way to maintain this.
The "do_build" stamps are known to differ and are harmless so those
are excluded from the test.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added test case to verify building of wic-image-minimal recipe
and produced artifacts: manifest and bzipped partitioned image.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added test case to check if <image>.env file is generated
and contains bitbake variables used in wic code.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Write set of bitbake variables used by wic into
build/tmp/sysroots/<machine>/imagedata/<image>.env
List of variables is defined in WICVARS variable in
meta/classes/image_types.bbclass.
This is needed for wic to be able to get bitbake variables without
running 'bitbake -e'.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the commandlist isn't available, the code currently gives a backtrace.
At least stop doing that and return more gracefully.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a basic test to verify that /lib/libc.so.6 and /lib32/libc.so.6 have the
right ELF class.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This fix the regresion introduced in commit
9c72c1a5aa0b49d3895bbefee7a264adfcc6f4ca
when testing with real hardware. This regression
happens when a test in real hardware fails.
[YOCTO #8203]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
This allows to have datastore variables in the dump
commands and will get the data when a new instance
it's created.
Also this remove special cases from the commands.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
It makes sense to separate the dump commands from the
oeRuntimeTest class, this way it can be used in all
the test context.
These are the changes included in this patch:
- Created classes: BaseDumper, HostDumper, TargetDumper
- Create an instance of HostDumper in imagetest.bbclass
and add it to TestContext class, this way any class
that have access to the TestContext would be able
to dump logs from the host
- Create an instance of TargetDumper in QemuTarget
class after get the runner, this way it is
accessible during the tests.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
Let's add output of image creation script to the bitbake log
as it can contain useful information.
One good example of such an information is wic report about
artifacts and .wks file used for image creation.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This variable is going to be used by wic to set partition
size. Setting it in image.py makes it possible for wic to
use it without calculating it again.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch modify three files altought two of them
are minimal modifications. This version includes
the changes proposed by Paul.
testimage.bbclass:
Create new vars for easy modification of the dump
directory and commands to be run on host and target
when a test fails
TESTIMAGE_DUMP_DIR: Directory to save the dumps
testimage_dump_target: Commands to run on target
testimage_dump_host: Commands to run on host
oetest.py:
- Allow to use the vars defined in testimage class
- Now able to run commands in the host and dump the
results
- Fix an issue with the condition where to run the
dump commands (Before it run the commands every
test after a failure, now it runs the commands only
in tests that failed)
- Fix the output to stdout
[YOCTO #8118]
(From OE-Core rev: 26fe645457633f90bb5ddbb12f5f7b9ca4a06cc5)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When running "git add" on a directory with older git versions, deleted
files aren't added to what is to be committed unless you explicitly
specify the -A option. The result of this is that when applying a patch
from a recipe which doesn't apply with "git am" (and we fall back to
applying the patch through other means then "git add" following by
a "git commit") these deletes weren't committed with the patch, leaving
them sitting deleted but not committed at the end.
This should fix test_devtool_modify_native (which unwittingly exercises
this scenario by attempting to run "devtool modify" on apt-native) on
machines with older git versions.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We can use "none" here instead of printdiff for some small performance
gains. This also means we can remove the ignore exit code hack which
leads to safer code.
Also drop an unused variable.
(From OE-Core rev: e2b8d6fa45b1ae530be2ffabf48ea61d4c467066)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A few short fixes to splitting/iteration done over package lists
in license.bbclass, package_manager.py and rootfs.py.
[YOCTO #7664]
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace the previous shell magic with a Python function to parse the readelf
output, and fix the package names to include the lib32- prefix.
[ YOCTO #8219 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
EAGAIN/EWOULDBLOCK can be followed by no data. So don't tight loop
waiting for data.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch fixes the ability to correctly identify syslog's package
name for the built image. It is derived from modifying oeqa/oetest.py
for [YOCTO #8170]
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Modified hasPackage() to split the content of pacakage manifest file
in containing lines and search at the begining of each line the
existance of the needed pkg.
[YOCTO #8170]
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On a nonblocking socket an exception can be generated for the EAGAIN
and EWOULDBLOCK errnos. Since these aren't actually errors make sure to
retry rather than bailing out.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Before this change on a test failure an exception would be generated due
to runqemu being killed before the logging thread which was on the other
end of the socket.
The exception was actually correct saying there was no data on a socket
marked readable, but this was because the qemu process was killed before
the listener thread.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The option was added so that the qemurunner could start a second tcp
serial port without adding machine conditional logic to qemurunner.
The issue that made this necessary was that when "virt" is passed to
qemu-system-aarch64, the normal mechanism for specifying a tcp serial
port does not work. This is because the hardware for the "virt" machine
is hardcoded in the device tree blob and the addition devices must be
virtio devices.
So runqemu can specify virtio for qemuarm64 whereas it seems all other
qemu machines work with the "-serial tcp*" option.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemu can freeze and stop responding if the socket buffer connected to a tcp
serial connection fills up. This happens of course when the reader of
the serial data doesn't actually read it.
This happened in the qemurunner code, because after checking for the
"login:" sentinel, data was never again read from the serial connection.
This patch solves the potential freeze by adding a thread to continuously
read the data from the console and log it. So it also will give a full log
of the console, rather than just up to the login prompt.
To simplify this patch, another serial port was also added to use for the
sole purpose of watching for the sentinel as well as being the interactive
serial port. This will also prevent the possibility of lots of debug
data on the console preventing the sentinel value from being seen due to
interleaved text.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
So that create_socket() can be called more than once to create sockets,
it now returns the socket and port rather than setting class variables
directly.
create_socket() now only uses exceptions for errors, not the return
value from the function.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The bootlog and qemusock variables were set in the class as part of the
create_socket() routine. However those variables are never used outside
of the same function and thus serve no purpose as class variables.
This initializes those variables near where they are used.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
I'd somehow missed the existence of fail() when I wrote these. It's
preferable here so you don't get the somewhat useless "false is not
true" message in the case of failure.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Added new wic testcase, for testing the creation of the hybrid iso
image with isoimage-isohybrid plugin.
Signed-off-by: Mihaly Varga <mihaly.varga@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use '.' instead of 'source' so this works with dash as /bin/sh.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Let's have the caller do this and then the function is a bit more
flexible (e.g. we can choose to parse with bbappends or not); fix up
calls to this function appropriately (of which there are only two, both
within devtool).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If a recipe is BBCLASSEXTENDed (e.g. to -native), its PN value and the
name of the bbappend will be different; we were assuming them to be the
same when reading in the workspace, leading to us seeing the base recipe
name everywhere afterwards.
Also add a test so we ensure this doesn't regress in future.
Fixes [YOCTO #8157].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The following IMAGES_FSTYPES defaulted to ext3:
"vmdk", "vdi", "qcow2", "live", "iso", "hddimg"
This patch changes the default for those IMAGES_FSTYPES to
ext4 in order to bring the images more in line with other BSPs.
Besides improvements in performance and reliability ext4 provides
additional functionality as well (option to turn off the journaling,
dynamic resizing of VDI volumes etc.).
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows to write the dump files immediately
after get the data from the target. Before this,
it would run all the commands and write the files.
The old behavior could cause no log written at all
if the serial console gets stuck.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The tearDown method is triggered when a tests ends
it doesn't matter if fails or succeeds. Inside this
method added an evalution to check if fails and then
run some commands in the target to get the data for
later debugging.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This allow to search for the prompt after a command is
run so it can avoid waiting for the timeout.
Also corrected identation issues
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Lucian Musat
Richard Purdie
zjh
Leonardo Sandoval
Jian Liu
Mariano Lopez
Ed Bartosh
Markus Lehtonen
Alejandro del Castillo
Ross Burton
Paul Eggleton
Alex Franco
Randy Witt
Costin Constantin
Mihaly Varga
Juro Bystricky