Age | Commit message (Collapse) | Author |
|
It is possible in an attempt only install, that everything listed is not
available to be installed. This will have the effect of clearing the
package list. However, we only check for an empty package list at
the beginning of the function. We need to also check before running the
install, otherwise we can fail due to 'error: no package(s) given".
(From OE-Core rev: 9ae6a2830dacb3c335754a6da91bd5cc30546b31)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using PR service the buildhistory-diff output contains a lot of
PKGR changes: In practice the mass of PKGR updates hide other important
changes as they often account for 80% of all changes.
Skipped incremental and decremental changes of PKGR versions to reduce
amount of the script output. All changes are still included in the
output if script is run with -a/--report-all command line option.
[YOCTO #9755]
(From OE-Core rev: a343788b11f6c4f92ae8d2035fe8cb54f922227e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A new test target is neede to test Systemd-boot similar
to gummiboot. Created a copy of GummibootTarget class
and named as SystemdbootTarget, at this point the
gummibootTarget will remain until documentation is
updated with new systed information.
(From OE-Core rev: d1fd3a7dbc363bdc02d810f796b3b810cb13f029)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
extraction
This allow to have more than one test to have json file in order
to install packages in the DUT without using a package manager.
[YOCTO #9926]
(From OE-Core rev: 129c2b4589710aa24e23108f2728f1625b72cb06)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
updateEnv() can be used in other places so move the
function to utils/commands.py
(From OE-Core rev: 380e5d80898cac4ffc9715b3f597d0b62a0643ff)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 71dd4c05c41e8b363dc1ecac1f5105d316ee82dc)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: b36712eef14c20007e0adb01cc7d4bce9e7926bb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This task runs all functions in IMAGE_QA_COMMANDS after the image
construction has completed in order to validate the resulting image.
Image sanity checks should either be Python functions which raise
bb.build.FuncFailed on failure or shell functions with return a
non-zero exit code.
Python functions may instead raise an oe.utils.ImageQAFailed
Exception which takes an extra argument, a description of the
failure.
python image_check_python_ok () {
if True:
raise bb.build.FuncFailed('This check always fails')
else:
bb.note("Nothing to see here")
}
image_check_shell_ok () {
if true
exit 1
else
exit 0
fi
}
[YOCTO #9448]
(From OE-Core rev: c9bef2ecf1a30159d11781184829f41844a58c13)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
xsettings-client is not meant to be a shared library and the only
user in oe-core (libmatchbox) now has an in-tree copy.
(From OE-Core rev: ed5cbf977dca8f3d85c8d933071c6e49fb4bd95f)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bmap-tools-native is required to generate .bmap file. Without it
wic fails with this error when run with --bmap option:
Error: A native program bmaptool required to build
the image was not found
Added bmap-tools-native to the list of requirements to build
in Wic.setUpLocal method.
(From OE-Core rev: dd11ab551f9bf1d8761d0430f19510a9caa53a12)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a subcommand which will "finish" the work on a recipe. This is
effectively the same as update-recipe followed by reset, except that the
destination layer is required and it will do the right thing depending
on the situation - if the recipe file itself is in the workspace (e.g.
as a result of devtool add), the recipe file and any associated files
will be moved to the destination layer; or if the destination layer is
the one containing the original recipe, the recipe will be overwritten;
otherwise a bbappend will be created to apply the changes. In all cases
the layer path can be loosely specified - it could be a layer name, or
a partial path into a recipe. In the case of upgrades, devtool finish
will also take care of deleting the old recipe.
This avoids the user having to figure out the correct actions when
they're done - they just do "devtool finish recipename layername" and
it saves their work and then removes the recipe from the workspace.
Addresses [YOCTO #8594].
(From OE-Core rev: fa550fcb9333d59b28fc0e4aebde888831410f5c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This provides us with the information we need to remove the original
version recipe and associated files when running "devtool finish" after
"devtool upgrade".
(From OE-Core rev: 92eb42c347af919cd9f8739515fdf806c12b5ba8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Allow the function to be called with the base layer path (in which
case it will just return the same path)
* Ensure that the function doesn't recurse indefinitely if it's called
on a file that's not inside a layer
* Correct the doc comment for accuracy
(From OE-Core rev: 912026d85c2f535be2f60c45979162ea25c7f356)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During a parallel build it's possible for unrelated shlib files to be removed if
the recipe they came from is about to be rebuilt. They can't be involved in the
dependency chains as otherwise they wouldn't be removed, so just silently handle
files disappearing.
[ YOCTO #8555 ]
(From OE-Core rev: 1e355da3fda742c78d99ddd2ee5caa9df52f92e1)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cmdline
Add ability to specify extra_bootargs (kernel cmdline) in order to enable systemd
debug log in images that enables systemd init.
[YOCTO #9299]
(From OE-Core rev: 09d62551c289b5607341a4f9c46eecd6390ad774)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This application needs GTK+ 2 which we're trying to move away from for Sato
images.
(From OE-Core rev: 5e52f208a17e7122209675fa96de6e7807c62feb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With Python 3, the encoding of a file is significant; several recipes in
OE-Core have patches which are not fully utf-8 decodable e.g. man,
lrzsz, and gstreamer1.0-libav, leading to errors when using devtool's
modify, upgrade or extract subcommands on these recipes. To work around
this, try reading the patch file as utf-8 first and if that fails try
latin-1 before giving up.
(From OE-Core rev: 7f4d7a6f51569954e204f110827a8ce256bcdc68)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
removing this test since we move directfb out of oe-core
(From OE-Core rev: 2d8fda36ecfa1945f22b7139a2febd12ec59272b)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the new pid monitoring code we have for recent versions of
gnome-terminal we can just drop the --disable-factory code now since
the other solution handles this case as well.
(From OE-Core rev: ed4957c444a2982c19e2f1f96d9afb2a992c1daf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently gnome-terminal just returns straight away, opening a terminal in a new
separate process we have no insight into. For patch resolution, this leads to
spawning many different terminal windows, for pydevshell, it just flashes a window
up and then closes.
We need to block until the command completes but gnome-terminal gives us no way
to do this. We therefore write the pid to a file using a "phonehome" wrapper
script, then monitor the pid until it exits.
[YOCTO #7254]
(also fixing do_devpyshell)
(From OE-Core rev: 76e8ab47c936674b8bb9bf1c48de53b30f5bf74a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This test refers to a function that no longer exists after the eSDK
install double execution of bitbake has been removed, and since
test_prepare_unexpected is the only test in this module, drop the
entire module. We can easily resurrect it if we have unit tests to add
in the future.
(From OE-Core rev: 7e792a22e62904ed2dafb1ea214911235e3f3efc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The progress patches change the output slightly, update the test to
deal with this.
(From OE-Core rev: 90dbd838fa97c89ace5cb147aa5cff39b94178b1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: f0420d8c934154a94957cabcfdc993f0eae92cd7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was a copy-and-paste of subprocess.check_output() from when we supported
Python <2.7, so simply delete it and use subprocess.check_output() instead.
(From OE-Core rev: b1f2d9ed8d4dc89c9e669f43f546463ccc2a76b9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we're building the extensible SDK we don't need to see the "Writing
locked sigs" message; it's only necessary when the user explicitly runs
bitbake -S none <target>.
(From OE-Core rev: 440a351ee13920045c9d3e51882908f7b3f01d35)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the new task progress functionality to report progress during
do_rootfs. This is a little coarse and ideally we would have some
progress within the installation section, but it's better than
nothing.
(From OE-Core rev: 370f08d434480c1790950e40db8f7687da78cb14)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a GTK+3 application, so we don't need to ship GTK+ 2 in Sato just for
the SDK test suite.
[ YOCTO #9780 ]
(From OE-Core rev: 53fcfe4348a2ca727844f2b0bd3fca2902cbdda0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test test_syslog_help doesn't exist, so skipping unless it passed just
produced a warning.
(From OE-Core rev: 9856fe02bf30cd9e834a7d324e357070f4d7735f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 2f7e4d0636ce1647edf2d82c65b82be0eb2c1db1)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using this option the script appends test results into a 'global results
file'. A CSV-formatted output of the results. This option is to provide
compatibility with the old build-perf-test.sh.
(From OE-Core rev: e9f18e63220e452f2b0c878998e57d944ae83980)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
BuildPerfTestRunner determines these from the Git repository under which
it is being run (i.e. where the build directory exists). The branch and
revision may be defined/overridden with OE_BUILDPERFTEST_GIT_BRANCH
and OE_BUILDPERFTEST_GIT_BRANCH environment variables, if needed. This
makes it possible to run the build performance test script even if the
top directory is not a git repository clone, for example.
(From OE-Core rev: e6004582454d8c6a18f617c12e6e408ded5be8df)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A new helper module for easier interaction with Git repositories.
Provides GitRepo class that represents one local Git repository clone.
The GitRepo class currently only has one method, run_cmd(), for running
arbitrary git commands in the repository. More specialized methods for
commonly used git operations can be added later.
(From OE-Core rev: 4eaf434f885afbda03fe67ab6e9ff291c7a9c77e)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Have the build/conf directory as part of test results.
(From OE-Core rev: ea32a8a65f668450e0ec0e80483bd5e8c91b8a18)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Re-implement "test4" from build-perf-test.sh which measures eSDK metrics.
(From OE-Core rev: c449ca1b062426380a0572aed2da4ee4a83281f5)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Re-implement "test3" from build-perf-test.sh which measures
bitbake parsing time.
(From OE-Core rev: 388c7160b90247df9c78d8803083821402c13af5)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Re-implement "test2" from build-perf-test.sh which measures
'bitbake core-image-sato -c rootfs'.
(From OE-Core rev: 8cb322d6a5be08f0bb2c9e5d3b73161b20d737a3)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Re-implement "test1_p3" from build-perf-test.sh which measures
'bitbake core-image-sato' with rm_work enabled.
(From OE-Core rev: bfe48d343e8a281760da0b6744c08d47039f93e0)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Re-implement "test1_p2" from build-perf-test.sh which measures
'bitbake virtual/kernel'.
(From OE-Core rev: 5ff82c6e2b0ff41a9bfdd49c99e84a982cf6e467)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Re-implement "test1_p1" from build-perf-test.sh which measures
'bitbake core-image-sato'.
(From OE-Core rev: 1ddd4a8ce4e2053def0e946d4e4b4b97bdc28e61)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The new class is responsible for actually running the tests and
processing their results. This commit also adds a decorator function for
adding new tests. No automatic test discovery, at least yet.
(From OE-Core rev: bf90aecb7e150d6bfac7240286c797b79d26528b)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 15b44a484ce408b0a1acfb907e2b12ebc6cce296)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a new method to BuildPerfTest class for measuring the disk usage of
a file of directory.
(From OE-Core rev: 85cdc240e75d481e93238fbf75f8b8431da05f19)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add new methods to BuildPerfTest class for running a shell
command and logging its output.
(From OE-Core rev: 8f0b11ba1266f9c650cf34d9b394d72009ee7207)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Extend BuildPerfTest class with a new method for measuring the system
resource usage of a shell command to BuildPerfTest class. For now,
easurement of the elapsed time is done with the Gnu time utility,
similarly to the build-perf-test.sh shell script. And, it currently only
records the elapsed (wall clock).
The measured values (currently, only the elapsed time) is actually a
dictionary, making it possible to extend it with additional resource
values, e.g. cpu time or i/o usage, in the future. In addition to the
actual values of the measurement each record contains a 'name' and
'legend' where name is supposed to function as a common key or id over
test runs, making comparison and trending easier, for example. Legend is
supposed to be a short human readable description.
(From OE-Core rev: ced156bfea4a6649d201f41275641a633f218322)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The new class will be used as an abstract base class for build
performance tests. This implementation contains some common
functionality used in multiple tests, "copied" from the
build-perf-test.sh shell script.
(From OE-Core rev: 35cd7363759a286e80ddca0d028db3d2bf524b17)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a new utility class for dropping Linux kernel caches. It uses sudo
and tee to write to the drop_caches file. Checking if the user has the
permissions to drop caches (without a password) is done by trying to
writing an invalid value to the drop_caches file. This way, we will find
if writing (with tee) is possible but not really dropping caches, yet.
User can avoid giving the password by adding something like:
<user> ALL = NOPASSWD: /usr/bin/tee /proc/sys/vm/drop_caches
to the system sudoers file.
(From OE-Core rev: c9cb248429ced50c96d11ba5361c272d4c9b9323)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Wireframe of a new Python module for containing build performance tests
and utility functions.
(From OE-Core rev: b44af9051a9da8d2cddc7b071a896331967f15cc)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Useful if one wants to separate stdout and stderr.
(From OE-Core rev: de9744c91a997a5ab0e7a19dbe13d8def8d62800)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Get rid of duplicate code.
(From OE-Core rev: cdd6b7386afd460337705d8117a4328d4993ecef)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|