| Age | Commit message (Collapse) | Author |
|---|
|
Terminology is the default Enlightenment terminal emulator
Signed-off-by: Rodrigo Chiossi <rodrigo.chiossi@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With the current code, if we use debian package backend and enable
multilib support, the do_rootfs process would always fail with error
messages like below.
E: Unable to locate package packagegroup-core-boot
This patch fixes the above problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When resolving a patch, a new process of gnome-terminal
is created for every patch to be resolved, it "waits"
for the previous one to end, instead of launching
multiple windows at the same time.
[YOCTO #7254]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This allows an image to skip the creation of kernel depmod
data. It is useful for creating an image that will run as a
container image inside a host with no knowledge of the parent's
kernel.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
An invalid value in IMAGE_FSTYPES was triggering a traceback. Add a
check and a reasonable error message instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Since the rewrite of the image construction code in python a few
releases ago, we remove a couple of packages from the image as one of
the final steps when constructing the image (notably update-rc.d and
run-postinsts). However, because of the order of operations, these
packages are still listed both in the buildhistory
installed_package*.txt files and in the manifest file created next to
the image, which is wrong.
There were two possible solutions to this: (1) change the order such
that the uninstallation occurs before calling ROOTFS_POSTPROCESS_COMMAND
or (2) add another hook variable in such that we can have the
package list collection code run at the right time. Because it's
currently possible (but very much not recommended) to install additional
packages within ROOTFS_POSTPROCESS_COMMAND, which may have postinstall
scripts and thus require the packages we would otherwise uninstall if we
were to take option 1, option 2 is really the least likely to cause
problems. Therefore, add ROOTFS_POSTUNINSTALL_COMMAND and make the image
and buildhistory classes use it.
Fixes [YOCTO #6479].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Rename it to _uninstall_unneeded.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Using populate_sysroot for this data was a nice idea but flawed as it
doesn't work in multilib builds. Instead we can use PKGDATA_DIR since
this is consistent over multilib builds. It also turns out to be
slightly neater code too. Hopefully this resolves the problem once and
for all.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the rpm package backend enabled, running:
bitbake <image>
bitbake virtual/kernel -c clean
bitbake <image> -c rootfs -f
results in an image with incorrect kernel module dependency information.
The problem is that the System.map and kernel-abiversion files are needed
for depmod and after the recent kernel changes, these are no longer in
sstate.
Its reasonable to require the kernel to unpack/build if you're
about to build a module against it. It is not reasonable to require this
just to build a rootfs.
Therefore stash the needed files specifically for depmod.
Also fix some STAGING_KERNEL_DIR references which were incorrect, found
whilst sorting through his change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Normally, strip preserves hardlinks which in the case of the way our hardlink
rather than copy functionality works, is a disadvantage and leads to non-deterministic
builds. This adds a move into place after the strip operation to ensure hardlinks
are broken and we bring back build determinism.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently, if one module is skipped, any other module calling skipModule
causes tracebacks about _ErrorHandler not having a _testMethodName
method.
This reworks the code in a way to avoid some of the problems by using
the id() method of the objects. It also maps to the correct name
format rather than "setupModule" or just skiping the item entirely.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Creating an SDK by means of do_populate_sdk, complementary packages
(SDKIMAGE_FEATURES = "dev-pkgs dbg-pkgs") are not installed when using
the deb packaging system.
The reason is that the call to install the complementary packages is missing
from the deb backend. This patch fixes that.
[YOCTO #7160]
(From OE-Core rev: 0bcca69ea97ac51acf290f8f1da1bde715ab51c4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the changes to kernel layout, we need to refer to the correct
location of the kernel abiversion file.
Thanks to Saul, Randy, Darren and Bruce to figuring out the issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
any log files
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
test_incremental_image_generation case failed because the log output
chanaged:
FAIL: test_incremental_image_generation (oeqa.selftest.buildoptions.ImageOptionsTests)
----------------------------------------------------------------------
Traceback (most recent call last):
File
"/buildarea3/yzhao1/poky-build/meta/lib/oeqa/utils/decorators.py", line 90, in wrapped_f
return func(*args)
File
"/buildarea3/yzhao1/poky-build/meta/lib/oeqa/selftest/buildoptions.py", line 25, in test_incremental_image_generation
self.assertEqual(0, res.status, msg="No match for openssh-sshd in log.do_rootfs")
AssertionError: 0 != 1 : No match for openssh-sshd in log.do_rootfs
----------------------------------------------------------------------
Using re search instead grep
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
on qemuppc
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using -C sets a taint on the specified task, and m4-native is in the
dependency chain for just about everything, which means that everything
gets forced to rebuild. We don't need the influence of this test to
extend outside of the test itself, so ensure that the taint gets cleared
at the end of the test.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Build some recipes so that we have the needed data in the sysroot for
recipetool to refer to when scanning for dependencies.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
assertTrue prints "False is not True" if it fails, which is pretty much
useless. Use a more appropriate assertion test where practical and add a
message where it isn't.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
We have just implemented incremental ipk image generation, but at the
moment this test doesn't support that, so skip it if not using rpm.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Without this, running tests individually failed with a traceback:
$ oe-selftest --run-test
buildoptions.ImageOptionsTests.test_incremental_image_generation
2014-12-23 14:40:37,636 - selftest - INFO - Checking that everything is in order before running the tests
2014-12-23 14:40:38,408 - selftest - INFO - Running bitbake -p
2014-12-23 14:40:40,235 - selftest - INFO - Loading tests from:
oeqa.selftest.buildoptions.ImageOptionsTests.test_incremental_image_generation
Traceback (most recent call last):
File "/home/user/poky/scripts/oe-selftest", line 179, in <module>
ret = main()
File "/home/user/poky/scripts/oe-selftest", line 164, in main
suite.addTests(loader.loadTestsFromName(test))
File "/usr/lib64/python2.7/unittest/loader.py", line 91, in loadTestsFromName
module = __import__('.'.join(parts_copy))
File "/home/user/poky/meta/lib/oeqa/selftest/buildoptions.py", line 12, in <module>
class ImageOptionsTests(oeSelfTest):
File "/home/user/poky/meta/lib/oeqa/selftest/buildoptions.py", line 14, in ImageOptionsTests
@testcase(761)
NameError: global name 'func' is not defined
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Python code should use spaces only for indentation.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
When computing the dependency graph for the image generation, we need
to take into account the compression type and identify the base type
it relates to. This allow for a more robust graph generation even when
using composed image types.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add some QA tests for devtool (and recipetool). These aren't
comprehensive but at least they are a start, and have already helped me
catch and fix a number of regressions.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Enable querying exported variables
* Use strip() to remove quotes so any internal quotes are not disturbed
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a module to help provide utility functions for dealing with recipes.
This would typically be used by external tools.
Substantial portions of this module were borrowed from the OE Layer
index code; other functions originally contributed by
Markus Lehtonen <markus.lehtonen@intel.com>.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When patches from a recipe have been written out to a git tree, we also
want to be able to do the reverse so we can update the patches next to
the recipe. This is implemented by adding a comment to each commit
message (using git hooks) which we can extract later on.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we don't do this, you may still be in the git am resolution mode at
the end of applying patches, which is not desirable.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Preserving carriage returns is important where the patch contains them.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When PATCHTOOL = "git", if we're not able to use "git am" to apply a
patch and fall back to "git apply" or "patch", it is desirable to
actually commit the changes, attempting to preserve (and interpret) the
patch header as part of the commit message if present. As a bonus, the
code for extracting the commit message is callable externally in case it
is useful elsewhere.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When PATCHTOOL = "git", git apply doesn't support fuzzy application, so
if a patch requires that it's better to be able to apply it rather than
just failing.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows us to use this function elsewhere in the code.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Multiple arguments to string formats need to be in a tuple.
Reported by Lorenz <lqb.list@gmail.com>.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
While invoking create_index failed, there was no error output
and didn't break the build until the package installation.
...
|ERROR: run-postinsts not found in the base feeds (qemux86 i586 x86
noarch any all).
...
The reason is we used multiprocessing to execute create_index, and
did not check its invoking result.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
filters for edgerouter, minnow and jasperforest.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If a BSP supports two or more multilibs, for example:
MULTILIBS = "multilib:lib32 multilib:lib64"
and a variable is already extended to include multilib variants,
for example in populate_sdk_base:
commit 396371588c7fd2d691ca9c39cd02287e43cb665b
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Thu Jul 24 22:09:09 2014 +0100
populate_sdk_base: Extend TOOLCHAIN_TARGET_TASK to include multilib variants
Most people expect the toolchain from a multilib build to contain multilib
components. This change makes that happen and is easy for users to override
should they want something different.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mapping clsextend.map_depends_variable("TOOLCHAIN_TARGET_TASK")
ends up with a wrong double extended package name like:
lib32-lib64-packagegroup-core-standalone-sdk-target
This patch avoid such issues.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
DpkgPM change all_arch_list variable set from PACKAGE_ARCHS to passed
archs variable because is different when is executed from rootfs.py
and sdk.py.
Credits to: Ricardo Ribalda <ricardo.ribalda@gmail.com>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Writes build information to target filesystem on /etc/build such as enabled
layers, their current status and commit.
squashspaces was moved to oe/utils.py to make it available to different classes
and avoid code duplication.
[YOCTO #6770]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The fix filters out irrelevant messages, and makes the catching more
accurate, the inner warn message in do_rootfs usually comes from the
output of complementary install, and pattern the format to catch it.
Here is the example of irrelevant messages:
...
|WARNING: log_check: There is a warn message in the logfile
|WARNING: log_check: Matched keyword: [warn]
|WARNING: log_check: `tmp/deploy/rpm/core2_64/pam-plugin-warn
-1.1.6-r5.0.core2_64.rpm' -> `tmp/work/intel_x86_64-wrs-linux/
wrlinux-image-installer/1.0-r0/rootfs/Packages.intel/./core2_64/
pam-plugin-warn-1.1.6-r5.0.core2_64.rpm'
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In package_manager.py, when using opkg as the packager, the command 'opkg <args>
info <pkg>' is called to get information about each pkg in BAD_RECOMMENDATIONS
in a format that can be written to the status file. The 'Status: ...' line is
modified and all other lines are passed through. Changing the verbosity level
argument for this command will change what it written into the status file.
Crucially, with the default verbosity level, no blank lines are being printed by
the opkg command and so no blank lines are being written to the status file to
separate each package entry.
The package parsing code in opkg expects package entries in the status file to
be separated by at least one blank line. If no blank line is seen, the next
package entry is interpreted as a continuation of the last package entry, but
the new values overwrite the old values.
So with the default verbosity level, a blank line follows some package entries
and these are parsed. The others are dropped due to the lack of blank lines. As
the verbosity increases, more debugging messages add blank lines and more
packages are parsed.
The solution to ensure that this works correctly regardless of the verbosity
level is simply add a blank line after the output of 'opkg info' is written to
the status file, ensuring that the next package is separated from the current
package.
[YOCTO #6816]
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Cc: Chris Carr <chris.carr@ge.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
There is a failure to build lib32-meta-toolchain:
...
|ERROR: lib32-packagegroup-core-standalone-sdk-target not found in the base
feeds (qemux86_64 x86 noarch any all).
...
In package_manager.py, the variable 'DEFAULTTUNE_virtclass-multilib-lib32'
is used to process multilib image/toolchain. But for the build of lib32-
meta-toolchain, the value of 'DEFAULTTUNE_virtclass-multilib-lib32' is
deleted. In 'bitbake lib32-meta-toolchain -e', we got:
...
|# $DEFAULTTUNE_virtclass-multilib-lib32 [2 operations]
|# set? /home/jiahongxu/yocto/build-20141010-yocto/conf/local.conf:237
|# "x86"
|# del data_smart.py:406 [finalize]
|# ""
|# pre-expansion value:
|# "None"
...
The commit 899d45b90061eb3cf3e71029072eee42cd80930c in oe-core deleted
it at DataSmart.finalize
...
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Tue May 31 23:52:50 2011 +0100
bitbake/data_smart: Change overrides behaviour to remove
expanded variables from the datastore
...
We add an internal variable 'DEFAULTTUNE_ML_<multilib>', assign it with the
value of 'DEFAULTTUNE_virtclass-multilib-lib32' before deleting.
For rpm backend in package_manager.py, we use DEFAULTTUNE_virtclass-multilib
-lib32 first, if it is not available, and try to use DEFAULTTUNE_ML_<multilib>
[YOCTO #6842]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The graph sorting algorithm for image dependencies does a look for an
occurrence of a searched string instead of comparing the chunk to the
searched string. This leads to the problem that ubifs is recognized as ubi aswell.
This fixes this by splitting up the string into chunks.
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The do_rootfs takes a very long time when build host has mounted many NFS
devices. syscall lstat() was being called on every filesystem mounted on the
build host during building.
The reason for the lstat() is that rpm is verifying that enough free disk space
is available to do the install. However, since the install is into the target
rootfs it should not matter how much free space there is in the host mounts.
Add checking for "rpm-ignoresize", by it, smart can make whether RPM skip
checking for diskspace when install a rpm package.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
bitbake meta-toolchain
ls tmp/deploy/sdk/poky-glibc-x86_64-meta-toolchain-i586-toolchain-1.7.manifest -al
...
|-rw-rw-r-- 1 root root 0 Oct 10 15:05 tmp/deploy/sdk/poky-glibc-x86_64-
meta-toolchain-i586-toolchain-1.7.manifest
...
The manifest is empty, the reason is target's ipk config path is
d.getVar('IPKGCONF_TARGET') rather than d.getVar('IPKGCONF_Target')
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We fixed these in parselog but not here. This test really can just be
deleted now really.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These are harmless from the USB pointer device we install, ignore them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Package Manager implementation for deb didn't
take a look about multilib enabled variants.
Changes are made for generate apt.conf, sources.list and
debian repo index Release and Packages files.
[YOCTO #1502]
Signed-off-by: Anibal Limon <anibal.ezau.limon.belmares@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Package managements (smart/apt-get/opkg-cl) generate some warn messages
to stdout, and we need to catch them and output by bb.warn.
Here is an example, while invoking smart to attempt install doc packages,
if install failed, it generates warn message to stdout.
...
|warning: Can't install util-linux-doc-2.24.2-r1@i586: Can't
install util-linux-doc-2.24.2-r1@i586: no package provides info
...
The fix catches it and outputs:
...
|WARNING: log_check: There is a warn message in the logfile
|WARNING: log_check: Matched keyword: [warn]
|WARNING: log_check: warning: Can't install util-linux-doc-2.24.2-r1@
i586: Can't install util-linux-doc-2.24.2-r1@i586: no package provides
info
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
|
|
Signed-off-by: Lucian Musat <georgex.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Rodrigo Chiossi
Chen Qi
Alejandro Hernandez
Dan McGregor
Paul Eggleton
Richard Purdie
Pau Espin Pedrol
Lucian Musat
Yi Zhao
Otavio Salvador
Ross Burton
Hongxu Jia
Jackie Huang
Aníbal Limón
Paul Barker
Pascal Bach
Chong Lu
Anibal Limon
Lucian Musat