| Age | Commit message (Collapse) | Author |
|---|
|
This allows better parallelism between the different tests as currently
this block takes the longest time to execute. devtool tests are still
all grouped into the "devtool" module for ease of exection.
This also makes it easier to execute some subset of devtool tests for
testing devtool changes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Currently some tests run in buffer mode and some don't. Those that don't can
corrupt stdout/stderr. Switch to using buffer mode everywhere so we're consistent.
If there is useful output on stdout/stderr, it will be displayed if the test
fails.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
If dbus isn't build first the dbus dependency of dbus-wait can't be detected
through pkgconfig and the test fails:
AssertionError: {'DEPENDS': {'dbus'}} != {}
- {'DEPENDS': {'dbus'}}
+ {} : Some expected variables not found in recipe: {'DEPENDS': {'dbus'}}
Ensure dbus is built and present in the sysroot.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The warn method is deprecated. We should use the documented warning instead.
Quoting from the python's official doc:
"""
Note: There is an obsolete method warn which is functionally identical to warning.
As warn is deprecated, please do not use it - use warning instead.
"""
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Sometimes we meet the following failure for the test_lookup_recipe
test case.
AssertionError: 'zlib\nbusybox is in the RPROVIDES of target-sdk-provid[32 chars]ummy' != 'zlib\nbusybox'
zlib
+ busybox- busybox is in the RPROVIDES of target-sdk-provides-dummy:
- target-sdk-provides-dummy
This is because target-sdk-provides-dummy rprovides busybox.
So clean things up to avoid failure.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
All test id (eg. @alias) inside manual testcase file shall follow the same
test id naming convention from oeqa automated tests (eg. selftest,
runtime, sdk, etc), where the test id consists of
<test_module>.<test_suite>.<test_function>. Furthermore, there shall be
only 1 unique test_module per each manual testcases file, where
test_module match the file name itself.
This file was using test_module name that does not match the file name
itself. Fixed test_module name as well as the test_suite name.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
As part of the solution to replace Testopia, manual test cases
need to be migrated to OEQA. These manual test case json files
will serve two use cases.
Use case#1: as input to the future commandline-based manual test
runner script, where this script will display actions and expected
result information in user friendly text, then it will capture
user input for test result and log, finally it will write test
result and log into existing standardize test result json format
from OEQA framework for automated tests.
Use case#2: QA will open and read these json file manually for
planning manual test execution. Any reader interested in
understanding manual test cases will open and read these files.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
All test id (eg. @alias) inside manual testcase file shall follow the same test id
naming convention from oeqa automated tests (eg. selftest, runtime, sdk, etc), where
the test id consists of <test_module>.<test_suite>.<test_function>. Furthermore,
there shall be only 1 unique test_module per each manual testcases file.
This file was using more than 1 unique test_module for testcases. Furthermore,
some of the testcases were defined using different test_suite where it was not needed.
This patch fix the manual testcases file to have only 1 unique test_module
as well as test_suite to simplify test id naming.
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Two changes made in oeqa/manual/compliance-test.json:
1. All test id (eg. @alias) inside manual testcase file shall follow the same test id
naming convention from oeqa automated tests (eg. selftest, runtime, sdk, etc), where
the test id consists of <test_module>.<test_suite>.<test_function>. Furthermore,
there shall be only 1 unique test_module per each manual testcases file.
This file was using more than 1 unique test_module for testcases. Furthermore, some of
the testcases were defined using different test_suite where it was not needed. This patch
fix the manual testcases file to have only 1 unique test_module as well as test_suite to
simplify test id naming.
2. Added 2 missing test cases for Beaglebone Stress Test.
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Two changes made in oeqa/manual/bsp-hw.json:
1. All test id (eg. @alias) inside manual testcase file shall follow the same test id naming
convention from oeqa automated tests (eg. selftest, runtime, sdk, etc), where the
test id consists of <test_module>.<test_suite>.<test_function>. Furthermore,
there shall be only 1 unique test_module per each manual testcases file.
This file was using more than 1 unique test_module for testcases.
Furthermore, some of the testcases were defined using different test_suite where it was not
needed. This patch fix the manual testcases file to have only 1 unique
test_module as well as test_suite to simplify test id naming.
2. As per review by Intel and Windriver team, 7 testcases were found obsolete. Removed 7 testcases.
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
QA team found that 10 manual bsp test cases from Testopia for
Beaglebone, EdgeRouter, and MPC need to be up streamed
[YOCTO #12650]
Signed-off-by: Mazliana <mazliana.mohamad@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Manual test step for SDK is updated. Previously toolchain was "poky-glibc-x86_64-core-image-sato-sdk<type-arch>-toolchain-<release-version>.sh"
But toochain for core-image-sato-sdk is not available in releases after 2.1, hence changed it to "poky-glibc-x86_64-core-image-sato-<type-arch>-toolchain-<release-version>.sh
Other less significant update is to add exepcted result in intermediate test steps.
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
"poky-glibc-x86_64-core-image-sato-<type-arch>-toolchain-<release-version>.sh"
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Added json file for compliance test cases to the manual runtime tests
Signed-off-by: Sudhir Sharma <sudhirx.sharma@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Now QEMU_USE_KVM can only be boolean, can not contain MACHINE any more.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The nightly-build-appliance target already tests this particular build.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The autobuilder runs bitbake-selftest already so we don't need
to execute this manually.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
As part of the solution to replace Testopia, manual test cases
need to be migrated to OEQA. These manual test case json files
will serve two use cases.
Use case#1: as input to the future commandline-based manual test
runner script, where this script will display actions and expected
result information in user friendly text, then it will capture
user input for test result and log, finally it will write test
result and log into existing standardize test result json format
from OEQA framework for automated tests.
Use case#2: QA will open and read these json file manually for
planning manual test execution. Any reader interested in
understanding manual test cases will open and read these files.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The parent code currently assumed that any parent branch is locally
checked out which may not be the case.
Use the local branch by default but fall back to the origin. This
also means removing the later saftey check as the branch may not exist
locally.
This fixes the autobuilder resulttool test pushing code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These functions can be reused by the resulttool code so move to the common
function library for this purpose.
(From OE-Core rev: c66f848938c04e133259c5b6903dc592866ab385)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This turns the core of the script into a library function. Ultimately this
will let us call that code with custom 'keywords' rather than relying
on the data parsed from bitbake metadata which can't be used when archiving
historical results.
(From OE-Core rev: 4820ca2b0850e29b04a4fd5659a6e9837d6714d0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a combined patch of the various tweaks and improvements I
made to resulttool:
* Avoid subprocess.run() as its a python 3.6 feature and we
have autobuilder workers with 3.5.
* Avoid python keywords as variable names
* Simplify dict accesses using .get()
* Rename resultsutils -> resultutils to match the resultstool ->
resulttool rename
* Formalised the handling of "file_name" to "TESTSERIES" which the code
will now add into the json configuration data if its not present, based
on the directory name.
* When we don't have failed test cases, print something saying so
instead of an empty table
* Tweak the table headers in the report to be more readable (reference
"Test Series" instead if file_id and ID instead of results_id)
* Improve/simplify the max string length handling
* Merge the counts and percentage data into one table in the report
since printing two reports of the same data confuses the user
* Removed the confusing header in the regression report
* Show matches, then regressions, then unmatched runs in the regression
report, also remove chatting unneeded output
* Try harder to "pair" up matching configurations to reduce noise in
the regressions report
* Abstracted the "mapping" table concept used to pairing in the
regression code to general code in resultutils
* Created multiple mappings for results analysis, results storage and
'flattening' results data in a merge
* Simplify the merge command to take a source and a destination,
letting the destination be a directory or a file, removing the need for
an output directory parameter
* Add the 'IMAGE_PKGTYPE' and 'DISTRO' config options to the regression
mappings
* Have the store command place the testresults files in a layout from
the mapping, making commits into the git repo for results storage more
useful for simple comparison purposes
* Set the oe-git-archive tag format appropriately for oeqa results
storage (and simplify the commit messages closer to their defaults)
* Fix oe-git-archive to use the commit/branch data from the results file
* Cleaned up the command option help to match other changes
* Follow the model of git branch/tag processing used by oe-build-perf-report
and use that to read the data using git show to avoid branch change
* Add ptest summary to the report command
* Update the tests to match the above changes
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OEQA outputs test results into json files and these files were
archived by Autobuilder during QA releases. Example: each oe-selftest
run by Autobuilder for different host distro generate a
testresults.json file.
These scripts were developed as a test result tools to manage
these testresults.json file.
Using the "store" operation, user can store multiple testresults.json
files as well as the pre-configured directories used to hold those files.
Using the "merge" operation, user can merge multiple testresults.json
files to a target file.
Using the "report" operation, user can view the test result summary
for all available testresults.json files inside a ordinary directory
or a git repository.
Using the "regression-file" operation, user can perform regression
analysis on testresults.json files specified. Using the "regression-dir"
and "regression-git" operations, user can perform regression analysis
on directory and git accordingly.
These resulttool operations expect the testresults.json file to use
the json format below.
{
"<testresult_1>": {
"configuration": {
"<config_name_1>": "<config_value_1>",
"<config_name_2>": "<config_value_2>",
...
"<config_name_n>": "<config_value_n>",
},
"result": {
"<testcase_namespace_1>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
"<testcase_namespace_2>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
...
"<testcase_namespace_n>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
}
},
...
"<testresult_n>": {
"configuration": {
"<config_name_1>": "<config_value_1>",
"<config_name_2>": "<config_value_2>",
...
"<config_name_n>": "<config_value_n>",
},
"result": {
"<testcase_namespace_1>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
"<testcase_namespace_2>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
...
"<testcase_namespace_n>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
}
},
}
To use these scripts, first source oe environment, then run the
entry point script to look for help.
$ resulttool
To store test result from oeqa automated tests, execute the below
$ resulttool store <source_dir> <git_branch>
To merge multiple testresults.json files, execute the below
$ resulttool merge <base_result_file> <target_result_file>
To report test report, execute the below
$ resulttool report <source_dir>
To perform regression file analysis, execute the below
$ resulttool regression-file <base_result_file> <target_result_file>
To perform regression dir analysis, execute the below
$ resulttool regression-dir <base_result_dir> <target_result_dir>
To perform regression git analysis, execute the below
$ resulttool regression-git <source_dir> <base_branch> <target_branch>
[YOCTO# 13012]
[YOCTO# 12654]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During the test logrotate.LogrotateTest.test_1_logrotate_setup,
there is below logic:
# mkdir $HOME/logrotate_dir
# sed -i "s#wtmp {#wtmp {\n olddir $HOME/logrotate_dir#" /etc/logrotate.d/wtmp
After all logrotate.LogrotateTest finished, only cleanup
$HOME/logrotate_dir as below, but don't restore
the config file /etc/logrotate.d/wtmp.
[snip]
def tearDownClass(cls):
cls.tc.target.run('rm -rf $HOME/logrotate_dir')
[snip]
That's to say, there is one additional line added
to /etc/logrotate.d/wtmp and will make the logrotate
service start failed when run systemd.SystemdBasicTests.test_systemd_failed
Take an example as below when run test as root:
# cat /etc/logrotate.d/wtmp
# no packages own wtmp -- we'll rotate it here
/var/log/wtmp {
olddir /root/logrotate_dir
missingok
monthly
create 0664 root utmp
minsize 1M
rotate 1
}
# ls /root/logrotate_dir
ls: cannot access '/root/logrotate_dir': No such file or directory
# systemctl start logrotate
Job for logrotate.service failed because the control process exited with error code.
See "systemctl status logrotate.service" and "journalctl -xe" for details.
# systemctl status logrotate
logrotate.service - Rotate log files
Loaded: loaded (/lib/systemd/system/logrotate.service; static; vendor preset>
Active: failed (Result: exit-code) since Wed 2019-02-13 03:35:19 UTC; 7s ago
Docs: man:logrotate(8)
man:logrotate.conf(5)
Process: 540 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=1/FAILURE)
Main PID: 540 (code=exited, status=1/FAILURE)
Feb 13 03:35:18 qemumips systemd[1]: Starting Rotate log files...
Feb 13 03:35:19 qemumips logrotate[540]: error: wtmp:9 error verifying olddir path /root/logrotate_dir: No such file or directory
Feb 13 03:35:19 qemumips logrotate[540]: error: found error in file wtmp, skipping
Feb 13 03:35:19 qemumips systemd[1]: logrotate.service: Main process exited, code=exited, status=1/FAILURE
Feb 13 03:35:19 qemumips systemd[1]: logrotate.service: Failed with result 'exit-code'.
Feb 13 03:35:19 qemumips systemd[1]: Failed to start Rotate log files.
Add the logic to restore /etc/logrotate.d/wtmp to
make the cleanup complete to fix the above issue.
(From OE-Core rev: a2db9320d97d12d87524ff16a329f9c38a8da33f)
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The test works by excluding curl-dev which curl-staticdev depends upon.
When static libraries aren't disabled, this leads to an odd looking test
failure.
Simply exclude curl-staticdev as well in case its enabled to make sure
the test always works.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
oe-selftest's devtool tests have been broken since commit 2457cd57
(oe-selftest: devtool: avoid parallel races by using temporary copy of
core) if meta is a symbolic link.
(From OE-Core rev: daba6c5a991b370709d17e51305334f55a3858ec)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Some of the devtool tests make changes to files under meta/ -
legitimately since we want these tests to be working with real recipes
and associated files. Unfortunately with the new oe-selftest
parallelisation this can break other tests if files go missing at the
wrong time (among other scenarios). To avoid this issue, simply take a
copy of the core repository and use that for these tests. (We copy the
entire repository since changing the path of meta/ influences COREBASE
and thus we need to have things like scripts/ alongside as well).
(From OE-Core rev: 2457cd57b4195924ef127f497efa2f34f411e660)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
testimage.bbclass installs a SIGTERM handler which conflicts with the
use of multiprocessing here. This is paritcularly problematic if the http
service is terminated before its started and hence before its had a chance
to reset the default signal handler (as the code was written).
Instead, temporarily remove testimage's handler whilst forking the http process
which means the correct handler is installed and won't deadlock.
Also take the opportunity to add in some log messages about the server start
and shutdown so that future debugging is easier and its clearer what the code
is doing.
(From OE-Core rev: cc0471439aa0085ca87deccf061c5b676ef12388)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
During debugging dnf issue, we found that the test_dnf_install
PASSED the testing even though the environment does not allow
dnf install to run successfully. Further debugging had identified
that current test_dnf_install will execute dnf install even when
the package to be installed already exist, thus dnf install
will just skipped and this test will PASSED even though it was
not.
To solve this, added additional logic to check if the package
to be installed already exist, if yes then remove the package
before actually run dnf install. This will make sure dnf install
was tested as expected.
(From OE-Core rev: 4f662b253f7313c4e02bfafb527cdac076b6309a)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
fixes:
DEBUG: [Running]$ ssh -l root -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.4 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; perl -e '$_="Uryyb, jbeyq"; tr/a-zA-Z/n-za-mN-ZA-M/;print'
| DEBUG: time: 1548816904.4024463, endtime: 1548817204.397057
| DEBUG: Partial data from SSH call: ssh: connect to host 192.168.7.4 port 22: Connection refused
for master/thud/sumo
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
As with the Python test, this can be both better and faster. No need to copy a
file, just run a one-liner.
(From OE-Core rev: c6eef46747fe58bb2310be4f06d2fa9b67901d72)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
We should only be wiping out things on target if the tests have
actually run.
(From OE-Core rev: d38c3eac0a5a1a9b0eb98385832e92f48145655e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
(From OE-Core rev: 564de3681353fe8e203425388e8be9703a89d2da)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Qemu do not use the ip input from external. It will
retrieve ip from QemuRunner instance and assign
ip value.
(From OE-Core rev: 14d99dc6c39c963ba3e0d9a30274846bd5369210)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Mark up these tests as needing a compiler, make and kernel source code
as appropriate, the image feature requirements can then be retired.
(From OE-Core rev: 9f64e6c25abdf494fb511e9cd401f8dcaa08be2a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Add the OEHasPackage decorator to a variety of tests so they determine
automatically if they should run against a given image.
To ensure tests can do this we need to move target operations such
as scp commands into the tests and out of the class startup/teardown.
(From OE-Core rev: 60d6580b85714b8960a964e775d76a7f937f5e5a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Currently this is three test cases:
1) test_python_exists. Fail if python3 isn't in PATH.
2) test_python_stdout. Run a Python script and check the output is as expected
3) test_python_testfile. Check that a file test_python_stdout wrote to exists.
(1) should be a setup and skip the test module if it isn't present.
(2) and (3) should be merged, there's no point copying over a two line Python
file, and the test doesn't verify that the file doesn't exist in the first
place.
Rewrite the test to check that Python is present in a class setup so the entire
test is skipped if it isn't and do some simple rot13 to verify that bytecode is
being executed correctly.
(From OE-Core rev: a35be5f32b4fe70b18ac1e2eccfd94558cecfbba)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
For example, core-image-sato skipped the test alltogether, as it
no longer pulls in Python 2.x at all.
(From OE-Core rev: 5ad0fe9ac6b6362011a17afaa7bee8e788093915)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The test cases assume that rpm-doc is built out, as it says it its
comment. This is not always true. And it sometimes results in
following error.
| cls.tc.target.copyTo(test_file, dst)
| UnboundLocalError: local variable 'test_file' referenced before assignment
Change to use base-passwd-doc, as this package is more likely to be
built out than rpm-doc.
(From OE-Core rev: 2e23543b48921182307065c1fa9e8b9d7fbb3cdc)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
As I will be leaving Intel, this address will no longer be valid,
so swap it for my personal one for now.
(From OE-Core rev: ea58ff101e28dfda3410de66d775df3d8a1e5a96)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
There are failures when multiple users run oe-selftest on the same
host:
PermissionError: [Errno 13] Permission denied: '/tmp/oe-saved-
tests/201812250324_qemu'
This is because /tmp/oe-saved-tests was created by user A, while user B tries
to write data in it, then the error will happen. This patch can fix the
problem.
Move the dumped data to ${LOG_DIR}/runtime-hostdump/ rather than
/tmp/oe-saved-tests/ to fix the problem.
(From OE-Core rev: e219fe5329599cd6c3682f521eaee3852a2c8980)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Add test cases to test “exclude” and “installroot“ options, also modify
the logic of filtering packages on the feed to have all the packages
needed by the tests.
[YOCTO #10744]
(From OE-Core rev: 1121806603c6f621d084b692216f3f616a0768dc)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Fixed:
MACHINE = "qemux86"
QEMU_USE_KVM = "qemux86"
IMAGE_CLASSES += "testimage"
$ oe-selftest -r runqemu.RunqemuTests.test_boot_rootfs
[snip]
File "/buildarea1/lyang1/poky/meta/lib/oe/types.py", line 122, in boolean
raise ValueError("Invalid boolean value '%s'" % value)
ValueError: Invalid boolean value 'qemux86'
Now QEMU_USE_KVM can only be boolean, can not contain MACHINE any more, kvm
will be enabled if target_arch == build_arch or both of them are x86 archs.
(From OE-Core rev: 7c1a8a624cad8d967635c6cb5f99cf655bde3d44)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
warnings
Use our own lsb function instead as used elsewhere by the codebase.
(From OE-Core rev: acac45a6fd604d28ef7c23d67482af3d7e8bcfe3)
(From OE-Core rev: 570256a64af5a3fa994a20a5cc4c74d59ffc361f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 5s timeout for non-kvm is too short, especially when the load is high,
which leads to unexpected errors, so set timeout to 60s by default.
(From OE-Core rev: 8197d0f638a760fc03062c7a9009117d083d7ead)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
This is useful for debugging.
(From OE-Core rev: da527d73f5eeae0f29b5f99aab757491d3f87ec7)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
2018-12-06 23:19:24,564 - oe-selftest - INFO - Traceback (most recent call last):
File "/media/build1/poky-sumo/meta/lib/oeqa/core/case.py", line 32, in _oeSetUpClass
clss.setUpClassMethod()
File "/media/build1/poky-sumo/meta/lib/oeqa/selftest/cases/eSDK.py", line 78, in setUpClass
cls.tmpdir_eSDKQA = cls.tempdirobj.name
AttributeError: type object 'oeSDKExtSelfTest' has no attribute 'tempdirobj'
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
INFO - ======================================================================
INFO - ERROR: setUpClass (eSDK.oeSDKExtSelfTest)
INFO - ----------------------------------------------------------------------
INFO - Traceback (most recent call last):
File "/home/pokybuild/yocto-worker/oe-selftest-debian/build/meta/lib/oeqa/core/case.py", line 32, in _oeSetUpClass
clss.setUpClassMethod()
File "/home/pokybuild/yocto-worker/oe-selftest-debian/build/meta/lib/oeqa/selftest/cases/eSDK.py", line 76, in setUpClass
cls.tmpdirobj = tempfile.TemporaryDirectory(prefix="selftest-esdk-", dir=bb_vars["WORKDIR"])
File "/usr/lib/python3.5/tempfile.py", line 929, in __init__
self.name = mkdtemp(suffix, prefix, dir)
File "/usr/lib/python3.5/tempfile.py", line 507, in mkdtemp
_os.mkdir(file, 0o700)
FileNotFoundError: [Errno 2] No such file or directory: '/home/pokybuild/yocto-worker/oe-selftest-debian/build/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/selftest-esdk-q7ln84gc'
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
break tests
Having image-buildinfo enabled causes containerimage.ContainerImageTests.test_expected_files
to fail due to the presence of an unexpected file:
['./',
'./etc/',
- './etc/build',
'./etc/default/',
'./etc/default/postinst',
Tweak the class to allow it to be disabled and disable it from the test just in
case it was enabled.
(From OE-Core rev: af67bf422a4df5b7e07894512ff73a5f493682ab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The python git module may or may not be enabled, allow this code to
function without it, falling back to the same method as metadata_scm.bbclass
uses. This will be cleaned up in the next round of feature development.
(From OE-Core rev: 6350586ba9f4a4107a2d457590824cd4d662d5b9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently sdk & sdkext will output json file to LOG_DIR, while
selftest will output json file to TOPDIR/log.
Standardize selftest json output file to LOG_DIR.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Chen Qi
Yeoh Ee Peng
sangeeta jain
Mazliana
Sudhir Sharma
Robert Yang
Mingli Yu
Peter Kjellerstedt
Paul Eggleton
Armin Kuster
Ross Burton
Alexander Kanavin
Jose Perez Carranza