| Age | Commit message (Collapse) | Author |
|---|
|
The Starting logging thread message is also executed on run() inside
LoggingThread class.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
LoggingThread is used for receive console output from QEMU
over TCP, so add filter to only wake poll on read events,
also change the event mask variable name to be more descriptive.
This fixes HIGH CPU consume caused by wake on ready to write
events.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Once the DUT is hanged during testing, currently all the following test
cases have to wait for default timeout to exit. Using this decorator the
user can choose a timeout at case by case basis and what happens when the
timeout is reached by overwriting the self.target.restart method.
[YOCTO #7853]
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On aarch64 we need to do this as the versions in the upstream source don't
recognise the target triplet causing SDK test failures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if qemu segfaults, the tests merrily continue trying to execute
which takes time for them to timeout and is a bit silly. Worse, no logs about
the segfault are shown to the user, its silent!
This patch tries to unravel the tangled web of issues and ensures that we:
* install a SIGCHLD handler which tells the user qemu exited
* check if qemu is running, if it isn't fail the test outright
* don't leave processes behind in sshcontrol which would hold
bitbake.lock and block shutdown
(From OE-Core rev: 77e9363feba53b72429154be5713c46b007ae0a4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
killpg should be being called with a pgid, not a pid.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, we see runqemu and qemu-system-* processes left behind when
bitbake is killed by buildbot. This is due to the use of setpgrp() in
the runqemu subprocess call.
We need the setpgrp call so that all runqemu processes can easily be
killed (by killing their process group). This presents a problem if this
controlling process itself is killed however since those processes don't
notice the death of the parent and merrily continue on.
Rather than hack runqemu to deal with this, we add something to
qemurunner, at least for now to resolve the issue. Basically we fork off
another process which holds an open pipe to the parent and also is
setpgrp. If/when the pipe sees EOF from the parent dieing, it kills the
process group. This is like pctrl's PDEATHSIG but for a process group
rather than a single process.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a task shows an error, the full log is surpressed since bitbake assumes
the user has been shown what is wrong. In this code path that isn't the
case and its much more helpful to show the user the full error. Therefore
show a warning instead to aid usability.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When two or more tests had the same name but different classes then
the decorator log whould have the output all wrong. This was because
a comparison which was made only between method names but now it
compares classes too.
[YOCTO #8029]
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if qemu segfaults, the tests merrily continue trying to execute
which takes time for them to timeout and is a bit silly. Worse, no logs about
the segfault are shown to the user, its silent!
This patch tries to unravel the tangled web of issues and ensures that we:
* install a SIGCHLD handler which tells the user qemu exited
* check if qemu is running, if it isn't fail the test outright
* don't leave processes behind in sshcontrol which would hold
bitbake.lock and block shutdown
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a test case is decorate by oeqa.utils.decorators.tag, this case will
by add a tag, testrunner will filter these tags by TEST_SUITES_TAGS
[YOCTO #7849]
Signed-off-by: zjh <junhuix.zhang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This changes the behavior when data was not received over
the serial console when a command is run. With this the
socket is no longer closed but it throws and exception that
can handled in upper layers. With this the test can continue
without throwing errors for not having the socket anymore.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds an instance of HostDumper to qemurunner,
with this instance now is possible to get dumps
from the host when there is an error.
This adds dump points in the next cases:
- runqemu exits before seeing qemu pid
- Fail to get qemu process arguments
- Not reach login banner before timeout
- qemu pid never appears
This also modifies the constructors of BaseDumper,
HostDumper and TargetDumper, they don't require
the datastore anymore, but the feature to replace
datastore variables has been lost (never used)
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the commandlist isn't available, the code currently gives a backtrace.
At least stop doing that and return more gracefully.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows to have datastore variables in the dump
commands and will get the data when a new instance
it's created.
Also this remove special cases from the commands.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
It makes sense to separate the dump commands from the
oeRuntimeTest class, this way it can be used in all
the test context.
These are the changes included in this patch:
- Created classes: BaseDumper, HostDumper, TargetDumper
- Create an instance of HostDumper in imagetest.bbclass
and add it to TestContext class, this way any class
that have access to the TestContext would be able
to dump logs from the host
- Create an instance of TargetDumper in QemuTarget
class after get the runner, this way it is
accessible during the tests.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
EAGAIN/EWOULDBLOCK can be followed by no data. So don't tight loop
waiting for data.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On a nonblocking socket an exception can be generated for the EAGAIN
and EWOULDBLOCK errnos. Since these aren't actually errors make sure to
retry rather than bailing out.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Before this change on a test failure an exception would be generated due
to runqemu being killed before the logging thread which was on the other
end of the socket.
The exception was actually correct saying there was no data on a socket
marked readable, but this was because the qemu process was killed before
the listener thread.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The option was added so that the qemurunner could start a second tcp
serial port without adding machine conditional logic to qemurunner.
The issue that made this necessary was that when "virt" is passed to
qemu-system-aarch64, the normal mechanism for specifying a tcp serial
port does not work. This is because the hardware for the "virt" machine
is hardcoded in the device tree blob and the addition devices must be
virtio devices.
So runqemu can specify virtio for qemuarm64 whereas it seems all other
qemu machines work with the "-serial tcp*" option.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemu can freeze and stop responding if the socket buffer connected to a tcp
serial connection fills up. This happens of course when the reader of
the serial data doesn't actually read it.
This happened in the qemurunner code, because after checking for the
"login:" sentinel, data was never again read from the serial connection.
This patch solves the potential freeze by adding a thread to continuously
read the data from the console and log it. So it also will give a full log
of the console, rather than just up to the login prompt.
To simplify this patch, another serial port was also added to use for the
sole purpose of watching for the sentinel as well as being the interactive
serial port. This will also prevent the possibility of lots of debug
data on the console preventing the sentinel value from being seen due to
interleaved text.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
So that create_socket() can be called more than once to create sockets,
it now returns the socket and port rather than setting class variables
directly.
create_socket() now only uses exceptions for errors, not the return
value from the function.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The bootlog and qemusock variables were set in the class as part of the
create_socket() routine. However those variables are never used outside
of the same function and thus serve no purpose as class variables.
This initializes those variables near where they are used.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use '.' instead of 'source' so this works with dash as /bin/sh.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This allow to search for the prompt after a command is
run so it can avoid waiting for the timeout.
Also corrected identation issues
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Raw mode allows to send the command without sending
'echo $?' for validation; Also this doesn't remove the
command or the prompt from the output returned. In raw
mode validation is done if there is output.
This raw mode would be useful for validate the prompt
when a user logs in.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This adds the automatic login after the target
finished booting. If the automatic login fails
it won't stop the target or any test, it would
only send a log to the file.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The only need for the console before this patch was
to check if the target has booted. This allows to send
commands to the terminal.
This new method is based on the method with the same name
of the QemuTinyRunner class. The difference here is it will
remove the command and the prompt. The other diference is
it will send an echo $? to check if the last command was
successful.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If runqemu fails, ensure the log output is shown as its invaluable
to aid debugging. Its slightly convoluted since we need to ensure
we don't block on reading the pipe which may still be executing
hence the need for nonblocking IO.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes OS hanging infinitely waiting for qemus process to release bitbake.lock
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This matches the value in testimage.bbclass, which makes sense
since the autobuilders are usually contended.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
os.environ is special and copy.copy() doesn't do what we'd expect,
changes in the child object change the parent. copy.deepcopy() is
also known to have issues with it.
Use the dedicated .copy() method which will not influence the
parent. This fixes selftest failures where the DISPLAY variable
disappears.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
'server_socket'
If start() returns False due to create_socker() failing, stop() may still get
called and currently this gives a track back since server_socket doesn't exist.
Avoid this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For debugging purposes, 5 lines often isn't useful as it doesn't even
cover a full backtrace. Show 25 instead.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Create a runqemu function which uses the QemuTarget() code from
oeqa.targetcontrol to setup the QEMU instance, with all of the added
robustness that that gives us. To do this, a datastore is needed for the
recipe in question (core-image-minimal) so we do the work needed to set
this up. We then use this runqemu function within the imagefeatures
tests instead of a hand-rolled implementation.
We can then use SSHControl to run the SSH tests rather than rolling our
own code to do that as an added bonus.
Fixed and extended by Paul Eggleton <paul.eggleton@linux.intel.com>.
Part of the fix for [YOCTO #7994].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Don't wait for QEMU to start if it's never going to (because runqemu
exited with an error)
* Don't error out if killing the process fails with "no such process"
(we don't care if it's already dead)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
runqemu-internal runs stty to return the terminal to its previous state
in case QEMU hasn't done that properly (which it at least used to do
when it crashed). For some reason I have yet to determine, stty blocks
(on tcsetattr() according to gdb) when run within QemuRunner() under
oe-selftest, with the result that we always wait until the timeout and
then we kill the script, which adds an extra delay after QEMU is
stopped. Naturally you would assume that this is something to do with
the nature of the terminal under which it is being run; however no
amount of playing around with stdin/stdout/stderr seemed to fix the
issue, apart from passing in subprocess.PIPE as stdin which makes stty
error out with "stty: standard input: Inappropriate ioctl for device". I
was also unable to come up with a reliable test for the terminal which
we could use inside runqemu-internal to avoid calling stty. For now, go
with the stdin=subprocess.PIPE workaround to at least avoid the delay
with minimal ill effect.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OE-Core commit 519e381278d40bdac79add340e4c0460a9f97e17 unfortunately
broke logging in two different ways:
1) it prevented logging to the task log from working within bitbake
-c testimage. This is due to the logger object being set up too early
which interferes with BitBake's own logging. If we prefix the name
with "BitBake." everything works (and we don't need to set the
logging level).
2) Additionally because it called the log functions on the logging
module and not the logger object it set up, this caused the
oe-selftest logging to start printing everything from that point
forward.
Fix these two issues and return us to the desired behaviour for
do_testimage.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's possible to customise the hostname trivially so don't assume that the
hostname hasn't been configured.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If DISPLAY is set, ssh-askpass can be triggered which is not what
we want in the middle of sanity tests. We can disable this by
unsetting DISPLAY.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of using bb.note() etc for logging use logging.Logger directly, allowing
the use of QemuRunner outside of bitbake.
Also clean up the logging/errors by moving create_socket() out of
__init__()/restart() and into start().
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Only split on the first equals character so that values that contain
equals characters (such as FAKEROOTENV) can be retrieved.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Locating which recipe provides a file in an image that you want to
modify and then figuring out how to bbappend the recipe in order to
replace it can be a tedious process. Thus, add a new appendfile
subcommand to recipetool, providing the ability to create a bbappend
file to add/replace any file in the target system. Without the -r
option, it will search for the recipe packaging the specified file
(using pkgdata from previously built recipes). The bbappend will be
created at the appropriate path within the specified layer directory
(which may or may not be in your bblayers.conf) or if one already exists
it will be updated appropriately.
Fairly extensive oe-selftest tests are also provided.
Implements [YOCTO #6447].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It searches using regex now and should be more accurate.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Bitbake can parse ~ in bblayer's paths.
Added this functionality to oeqa code.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This isn't a test of wget so if the files we need are present in DL_DIR,
use them from there and save a bit of speed/bandwidth and skip the wget.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use threading to get the current threads ident to select the current
executing frame to ensure that the scanned stack is the expected stack.
This allows for the decorators to be used within a process that has
multiple threads executing.
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The connection and commands are done via serial.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
TEST_SUITES="auto" is useful to run all suitable tests without
having to hard-code the list. However, it did not take test
dependencies into account, which can be an issue for tests
which really depend on some other test to run first.
To fix this, modules get loaded in the order determined by
TESTS_SUITES, but then get re-ordered based on dependencies
derived from @skipUnlessPassed before running them. The original
order is used to break ties when there are no dependencies, so
reordering only occurs when really necessary.
@skipUnlessPassed gets extended such that it makes the test name
a method depends on available for inspection by the test loader
in oetest.py.
Unfortunately Python's unittest offers no API to inspect tests
in a TestSuite, so the code has to rely on implementation details
to find all tests. The worst that can happen when the implementation
changes is that tests are not found and reordering does not happen.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Aníbal Limón
Lucian Musat
Richard Purdie
zjh
Mariano Lopez
Randy Witt
Alejandro Hernandez
Paul Eggleton
Ross Burton
Ed Bartosh
Nathan Rossi
Patrick Ohly