| Age | Commit message (Collapse) | Author |
|---|
|
This check makes sure that, when usrmerge distro feature enabled, no package
installs files to root (/bin, /sbin, /lib, /lib64) folders.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Prepare the symlinks required for merged /usr at the time of rootfs creation.
The links created in rootfs are:
/bin --> /usr/sbin
/sbin --> /usr/sbin
/lib --> /usr/lib
/lib64 --> /usr/lib64
We cannot make these symlinks as part of 'base-files' or some other package.
Because at rootfs creation, installation of the package(say kernel) that depends
on these root folders/links fails, if package manager installs this package
prior to base-files.
These symbolic links in top level folder should be present as long as
- kernel tools use /lib/{module,firmware}
- shell scripts uses "#!/bin/sh"
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use ${root_prefix} instead of ${base_prefix} while setting
${target_base_prefix}, otherwise we might loose the root prefix configuration
change in case of 'usrmerge' distro feature is enabled.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
mirrors is a list after split() and results in:
AttributeError: 'list' object has no attribute 'strip'
when the 'mirror values are pairs' check fails.
Signed-off-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The write_{host,target}_sdk_manifest don't need to be set as
SDK_POSTPROCESS_COMMAND because are already append to
POPULATE_SDK_POST_{HOST,TARGET}_COMMAND and the if doesn't
make sense because are only added for populate sdk task.
[YOCTO #11741]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
As gcc 4.5 is very old now (released in 2010, gcc 4.6 released in 2011)
this check can be removed now.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
qemu-arm and libsdl-native are not in HOSTTOOLS, so there's no point in
checking that they're on PATH.
Also qemu uses pkg-config to find SDL, so libsdl-native isn't required.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Added a new POPULATE_SDK_PRE_TARGET_COMMAND variable, which can contain
functions need to be executed at pre traget sysroot creation phase.
classes/populate_sdk_base.bbclass: Added POPULATE_SDK_PRE_TARGET_COMMAND to sdk
command variables list.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since the changes introduced in ae9102bda398
("copyleft_filter.bbclass: Allow to filter on name"), it is
impossible to filter on the recipe type, all recipes are
treated as though they should be included if the license
matches, irrespective of the COPYLEFT_RECIPE_TYPES
variable.
Fix this.
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It can be useful to add RRECOMMENDS to packages created, based
on certain PACKAGECONFIGs.
In particular where a package depends on certain linux kernel
infrastructure (kernel modules) which might or might not be
built as a module, being able to RRECOMMENDS instead of
RDEPENDS on the relevant packages avoids build failures in
case those modules are built statically into the kernel, i.e.
in case no package is being created for them.
Add another field to the PACKAGECONFIG syntax to achieve just
that.
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It would be possible to achieve any order of calling functions if
prefuncs are added with appendVarFlag and postfuncs with prependVarFlag.
Then image_X.bbclass can add code with either pre/post-funcs or
do_image_x_append or _prepend.
The execution order would be:
image_X prefuncs
image prefuncs
do_image_X_prepend from image_X.bbclass
do_image_X from image.bbclass
do_image_X_append from image_X.bbclass
image postfuncs
image_X postfuncs
[YOCTO #11372]
Thanks to Ola Nillsson for the idea.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The IMAGE_DEPENDS_<type> variables can be set to add dependencies for
individual image types. Those dependencies are added to the do_rootfs
task, while they really should be added to the specific image type tasks.
These variables are not documented anywhere.
Replaced usage of IMAGE_DEPENDS_<type> with explicitly added
dependencies to do_image_<type> tasks.
[YOCTO #11302]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Prompt error message to guide user add argument
MKUBIFS_ARGS and UBINIZE_ARGS on
every UBI and UBIFS image creation.
[YOCTO #11589]
Signed-off-by: Choong YinThong <yin.thong.choong@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Python function subprocess.call() returns the return value of the
executed process. If return values are not checked, errors may
go unnoticed and bad things can happen.
Change all callers of subprocess.call() which do not check for
the return value to use subprocess.check_call() which raises
CalledProcessError if the subprocess returns with non-zero value.
https://docs.python.org/2/library/subprocess.html#using-the-subprocess-module
All users of the function were found with:
$ git grep "subprocess\.call" | \
egrep -v 'if.*subprocess\.call|=\ +subprocess\.call|return.*subprocess\.call'
Tested similar patch on top of yocto jethro. Only compile tested
core-image-minimal on poky master branch.
Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Make use of the library function oe.package.strip_execs for stripping
sysroot executables. oe.packge.strip_execs is based on code previously
residing in sysroot_strip.
Signed-off-by: Tobias Hagelborn <tobiasha@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Following QAPATHTEST (QA hook for each file in each package) and QAPKGTEST (QA
hook for each package), add QARECIPETEST: a hook which is executed once per
recipe in do_package_qa.
This makes it trivial to add recipe-wide QA tests that integrate with the
existing tests.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Gnome apps seem to increasingly package those, so let's make it common.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Provide a descriptive error message and exit the environment-setup script,
when LD_LIBRARY_PATH is set on the host system.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix up the generation of uImage from vmlinux when KEEPUIMAGE != 'yes'.
This fixes up the working directory that do_uboot_mkimage is run from,
such that it is run from the ${B} directory to access built artefacts.
Simplify the logic in the task so that the parse step either adds the
task or not if the conditions are met. This reduces the need for the
task to run in cases when it is not used. The task is also changed to
depend on the kernel_link_images task as arch/<arch>/boot/* is not
available until after kernel_link_images in certain cases (e.g.
vmlinux/uImage only KERNEL_IMAGETYPES).
Fix up the use of ${S}/vmlinux when pulling the entry symbols
address so that it accesses the vmlinux in ${B}.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Due to the problem fixed in
'56c677a multilib: Move redefinition of STAGING_DIR_KERNEL'
STAGING_KERNEL_DIR must be redefined for lib32 in multilib.bbclass.
However this redefinition expanded STAGING_KERNEL_DIR to an absolute
path. This unconsciously added the TMPDIR path in the sstate object,
causing packages depended on STAGING_KERNEL_DIR being rebuild if the
TMPDIR was changed.
Solve this by forcing the unexpanded TMPDIR variable to remain in the
beginning of STAGING_DIR_KERNEL (as default). Since TMPDIR is included in
BB_HASHBASE_WHITELIST, the sstate object will not be depended on the
expanded path anymore.
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It's possible for tasks to stage symlinks that point to non-existent
files; an example is ncurses-native.do_populate_sysroot. There wasn't
any error checking here so this broke the build when "task" was included
in BUILDHISTORY_FEATURES. In any case we shouldn't be following symlinks
and getting the sha256sum of the link target - we need concern ourselves
only with the target path, so check if the file is a link and sha256 the
target path instead if it is. If it's neither a regular file nor a
symlink (perhaps a pipe or a device), just skip it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some of these are clearly dead, e.g. one binutils patch reverts the effects
of the earlier one.
This also removes the uclibc site files. We now have mechanisms to allow these
to be extended from another layer should someone ever wish to do that.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
uclibc support was removed a while ago and musl works much better. Start to
remove the various overrides and patches related to uclibc which are no longer
needed.
uclibc support in a layer would still be possible. I have strong reasons to
believe nobody is still using uclibc since patches are missing and I doubt
the metadata even parses anymore.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These comments/variables appear to be long dead, remove them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the creation of ipks to happen in parallel, making best use of resources
on multiprocessor systems.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the creation of debs to happen in parallel, making best use of resources
on multiprocessor systems.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is the potential for sensitive information to leak through the urls
there and removing it brings this into the behavior of the other package
backends since filtering it is likely error prone.
Since ipks don't appear to be generated at all if we don't set this, set
the field to the recipe name used (basename only, no paths). This avoids
information leaking. We may want to drop the field if opkg can allow that
at a future point but the recipe name is a suitable identifier for now.
Reported-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This achieves the same goal as the same change to bitbake.conf itself,
but because the class gets added later as part expanding INHERIT, this
new approach is less likely to run into problems when DISTRO_FEATURES
contains complex code.
Another difference is that the class currently does not get inherited
by default and thus is completely absent from a build unless some
layer or include file adds it to INHERIT.
Compared to the earlier code in bitbake.conf and a similar class in
intel-iot-refkit, additional overrides now get sorted. This makes the
final OVERRIDES more deterministic.
The lessons learned about unintentionally depending on OVERRIDES are
documented in the class because such problems are more likely to show
up as unexpected signature differences when using this class.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If these are set to URLs then the errors produced are not helpful.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added leading space to vardeps to avoid flag value to be
added to the existing value without a separator.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replaced setVarFlag calls to appendVarFlag to allow
modification of prefuncs, postfuncs and subimages flags
in inherited image classes.
[YOCTO #11372]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replaced repeated expression "do_image_%s" % t with
a variable 'task' to simplify the code and increase
readability.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The function is "sysroot_strip" instead of "split_and_strip_files".
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes there's a need to change existing UBOOT_CONFIG setting from a recipe,
distro or local config, such as an override or even switch back to UBOOT_MACHINE.
Unfortunately, there's no easy way to override or unset flags, so using them as
an error condition is rather heavy-handed. Change those conditions to check the
UBOOT_CONFIG variable itself, not its flags.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
In common with the other package handling functions, don't depend on the
value of OVERRIDES. This means when we change MACHINE, we don't have to
repackage everything.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These have values set elsewhere and this code was overwriting them leading
to odd signature issues. Append instead preserving the original values.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit aea90e9ee6f34e7c1c08307080b1e29646668df6.
RP hadn't meant to merge this yet and its causing problems so delay it until its
ready.
|
|
During the transition to dnf and rpm4, the functionality to
automatically make RPM determine dependencies was lost.
Before the transition, an OE specific tool called rpmdeps-oecore had
been added to the rpm suit. It was based on the rpmdeps tool that is
part of rpm. For each file specified on its command line, it would
output the provides and requires that RPM could determine.
During the transition to rpm4, rpmdeps-oecore was replaced with the
standard rpmdeps. However, what no one noticed was that unless rpmdeps
is given options, e.g., -P or -R, to tell it what it should output, it
will not output anything. Thus, it would do all the work to determine
the requirements, but would keep silent about it. And since no output
from rpmdeps is expected unless there are requirements, there were no
warnings indicating that everything was not working as expected.
Porting the old rpmdeps-oecore to work with rpm4 is not really
possible since it relied on being able to access internals of RPM that
are no longer available. However, it turned out that rpmdeps had a
debug option, --rpmfcdebug, that would output exactly the information
that we need, albeit in a different format and to stderr. To make this
usable, rpmdeps has now received a new option, --alldeps, which sends
the information we need to stdout.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add get_extra_sdk_info to reuse code in buildhistory
The functionalities to generate SDK and eSDK manifest files are different,
the SDK comes from package information and the eSDK comes from sstate artifacts.
Only execute write_sdk_{host, target}_manifest when is on populate_sdk class.
Adds new functions write_sdk{host, target}_ext_manifest to execute on postprocess
in populate_sdk_ext because at the end we have all the sstate artifacts to
generate the manifest.
[YOCTO #9038]
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This function is going to be used for generating the target and host
manifest files packages for eSDK. Added some fixes for buildhistory.bblclass,
and docstring for get_extra_sdkinfo at oe.sdk
[YOCTO #9038]
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using RPM, depends.dot may contain dependencies such as
"/bin/sh", which will confuse _toaster_load_pkgdatafile(). Ignore
them. While at it, also ignore dependencies that contain parentheses,
e.g., "libc.so.6(GLIBC_2.7)".
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By using a single regular expression, the parsing of the depends.dot
file can be simplified a lot. This should also make it less
susceptible to formatting changes in that file.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Convert incorrectly formatted dependencies such as:
"bar -> "foo" ">=" "1.2.3"
into dependencies with edge labels:
"bar -> "foo" [label=">= 1.2.3"]
* Remove rpmlib() and config() dependencies such as:
"foo" -> "rpmlib(CompressedFileNames)" [label="<= 3.0.4-1"]
and:
"base-files" -> "config(base-files)" [label="= 3.0.14-r89.49"]
* Remove the trailing semicolon that was added to each line. It fills
no purpose.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This makes the file-rdeps test support:
* versioned dependencies, e.g., "perl (>= 5.000)", and
* package dependencies among the file dependencies, e.g., "perl".
It also ignores all "perl(...)" dependencies since it is expected that
these are generated and handled by rpm itself and there is no reason
to second guess what it is doing.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enabling SSTATE_MIRRORS sometimes causes SRCREV values not
to be written/updated in the build history. This happens more
often if SRCREV is set to ${AUTOREV}
Explicitly writing SRCREVs when recipe history is being written
should fix this.
[YOCTO #10948]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Amarnath Valluri
Soren Brinkmann
Mikko Ylinen
Aníbal Limón
Ross Burton
André Draszik
Ed Bartosh
Choong YinThong
Mikko Rapeli
Tobias Hagelborn
Alexander Kanavin
Denys Dmytriyenko
Nathan Rossi
Peter Kjellerstedt
Petter Mabäcker
Paul Eggleton
Richard Purdie
Patrick Ohly
Chen Qi
Francisco Pedraza