| Age | Commit message (Collapse) | Author |
|---|
|
In a stateless image, /etc is not a good place for the "build"
file. By definining the location with a variable it becomes possible
to have the file created elsewhere on a per-image basis. The default
is the same as before.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We currently fetch,configure,build, and install cvs as our test for the
sdk. cvs unfortunately, requires a default editor in order to run. The
change in 94790a8254d6 that checks to see if you have something like vi
installed is fragile since you may have a different default editor. This
patch switches from using cvs as a test to using cpio. cpio also uses
autotools so the functionality tested is equivalent.
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When rewriting the do_rm_work injection, do_rm_work_all had been
removed because it seemed obsolete, as do_build now always triggers
do_rm_work.
However, do_build does not get triggered for all recipes and thus
do_rm_work was not called for recipes that got built only
partially. For example, zlib depends indirectly on
zlib-native:do_populate_sysroot. Because of that dependency,
zlib-native got compiled, but do_rm_work was never called for it.
Re-introducing do_rm_work_all fixes that by making do_build depend on
do_rm_work_all, which then recursively depends on do_rm_work of all
dependencies. This has the unintended side-effect that do_rm_work then
also triggers additional work (like do_populate_lic) that normally
doesn't need to be done for a build. This seems like the lesser evil,
compared to an incomplete cleanup because it mostly enables the
lighter tasks after do_populate_sysroot.
The real solution would be to have two kinds of relationships: a weak
ordering relationship ("if A and B are enabled, A must run before B,
but B can also run without A") and hard dependencies ("B cannot run
unless A has run before").
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Depending on wic-tools:do_build pulls a lot of additional, indirect
dependencies into the image sysroot during do_image_wic as soon as
rm_work.bbclass is active, because then we have
do_build->do_rm_work_all->[all dependencies]. One of those
dependencies is libgcc-initial, which clashes with libgcc itself,
leading to errors in extend_recipe_sysroot like this:
Exception: FileExistsError: [Errno 17] File exists: '.../tmp/sysroots-components/corei7-64/glibc-initial/usr/include/fstab.h' -> '.../tmp/work/intel_corei7_64-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/include/fstab.h'
As the image recipe only needs the sysroot of wic-tools and does not
need to wait for the build of wic-tools to finish, depending on
do_populate_sysroot is the better choice and happens to avoid
the problem above.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
section for each dtb
Before this, dtb sections were named by their position index in KERNEL_DEVICETREE. Also there was only one item in the config section, so only the first dtb was seen by the bootloader.
This patch adds a config section for each dtb named by the dtb filename. This is what bootloaders usually know about the machine they run on.
Signed-off-by: Florian Wickert <fw@javox-solutions.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Replace hardcoded '/lib' in kernel modules installation path with
${nonarch_base_libdir}, which is meant exactly for this.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
|
|
Previously, with USERADD_ERROR_DYNAMIC set to error/warn, if a static
UID/GID was specified in the recipe, then no error/warning would be
issued even if no ID was specified in the passwd/groups files.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If this bbclass is used and a recipe specifies a static ID for a
user/group as part of the USERADD_PARAM_${PN} or GROUPADD_PARAM_${PN},
the build would fail with and error like this if there was no
corresponding ID in the passwd/group files specified via
USERADD_UID_TABLES/USERADD_GID_TABLES:
ERROR: meta-oe/recipes-support/postgresql/postgresql_9.4.11.bb:
meta-oe/recipes-support/postgresql/postgresql_9.4.11.bb inherits
useradd but doesn't set USERADD_PARAM, GROUPADD_PARAM or
GROUPMEMS_PARAM for package postgresql
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Often, eg when using angular2, there's a need to install also
the devDependencies.
The default is to keep the old behaviour, to not install
devDependencies.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
bb.data.expand(x, d) is deprecated API.
[YOCTO #10678]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
16777216 bytes is a minimal possible filesystem size for BTRFS.
mkfs.btrfs fails to create a filesystem if rootfs size is too small.
Increased filesystem size to make it possible for mkfs.btrfs
to create an image for small rootfs directories,
e.g. for core-image-minimal.
[YOCTO #11163]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As of ccache-3.3, ccache tries to ensure that the paths in the debug
information are always correct. It does this by including the current
directory in the hash if debug output is enabled. It includes support for
detecting remapping via a single -fdebug-prefix-map argument uses the
remapped directory in the hash instead.
The DEBUG_PREFIX_MAP in bitbake.conf remaps the source directory, target
sysroot and native sysroot separately which results in multiple
-fdebug-prefix-map arguments. Although ccache passes all these arguments
through to the compiler, it only enables the special behaviour described
above if the last one matches the current directory. (See
https://github.com/ccache/ccache/issues/163 )
Even if ccache did correctly honour each of the remapping arguments, the
hashes would still be different every time ${PV} or ${PR} change because
the default DEBUG_PREFIX_MAP contains maps to paths including them.
So it seems that for ccache to be of any use with this configuration,
CCACHE_NOHASHDIR needs to be set.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Helped-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Single long commands are difficult to read and maintain. Split it to make
it more human-friendly.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
U-Boot people are amazingly pedantic in their insistence on proper
spelling of "U-Boot", so humour them.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The recent change in buildhistory.bbclass to use a tab in
installed-package-sizes.txt between "KiB" and the package name caused
toaster_buildhistory_dump() to fail since it parses the file and
expected a space there.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Changes to SKIP_FILEDEPS should change the sstate checksum. To make
that happen, it needs to be listed in the list of package specific
variables, therefore add it.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adjust the message slightly to make it clearer, in particular mentioning
the HOSTTOOLS variable.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Due to the recently implemented update-alternatives for bash binary,
sanity checker may end up with a (false-positive) error such as:
Error, /bin/sh links to /bin/bash.bash, must be dash or bash
This patch modifies the test: presence of "/bash" or "/dash" in shell binary
name results in pass.
[YOCTO#11108]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Working fine for musl targets now
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are several issues with rpmdeps after the rpm v5 -> v4 transition:
* _rpmfc_magic_path is an invalid option for rpm4
* --rpmpopt is an invalid option for rpm4
* we need to use the path to rpmrc since otherwise it poitns at the
original build path
* we need to set MAGIC in the environment so libmagic can find its
files.
This patch addresses those and ensures rpmdeps works in relocated builds
from sstate (or with rm_work).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This causes MBs of log messages which overload the standard 200kb syslog limit
used by busybox syslog by default. This means some tests which rely on messages
being detected in syslog, e.g.
rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size
fail (AssertionError: 54 not greater than or equal to 80 : Cound not find sufficient
amount of rpm entries in /var/log/messages, found 54 entries).
We enabled this to aid debugging of some systemd race issues, those are
now resolved so we can disable this. Leave the log level parameter as a
comment to save others having to look it up if they need debugging.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This ensures that remapping happens correctly, particularly
when package groups list noarch packages, and multilib is in use. Previously
this was masked by rpm doing *another* layer of remapping on top of this.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
not add multilib prefix to package arch
This is done for reasons I cannot establish, and greatly complicates the code
that installs packages into rootfs.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Packages need to contain just one value for the os field, otherwise
rpm will refuse to install them if they don't match what is in
/etc/rpm/platform.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
nativesdk-* rpm packages all require /bin/sh because postinst scriptlets
are run with it. We can either teach rpm4 and dnf to ignore that dependency
(a lot of non-upstreamable work), or add auto-satisfy the dependency
in each package. I've chosen to do the latter.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
The logic is scattered all over the place, but amounts to
"install, unless the rootfs is read only". Let's express that directly.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
This is the ${W}/package directory which may be reused in subsequent builds.
Also clean up various default directories rpm 4 creates.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
It's handled by the rpm wrapper command, created in rpm recipe.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
To properly look at this patch, you probably need a side-by-side diff viewing tool.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Previously they were swapped, not sure why. Their meaning, as far as rpm
world goes, is different:
- Recommends is a soft dependency and will be installed by default; there is
an option not to do that.
- Suggests is a suggestion to be picked up and presented to end user by
package management tools; it has no special meaning otherwise.
OE packages use RRECOMMENDS, which should be mapped to Recommends rpm tag,
so that the packages will be picked up as dependencies.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
instead of "all"
Too many places in dnf/rpm4 stack make that assumption; let's not fight against it.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
rpm4 installs them in different locations than rpm5. This also replaces
our custom rpmdeps-oecore with standard rpmdeps; I'm not seeing a
significant performance penalty.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Also fixes a use before defined bug with localdata.
Signed-off-by: Jack Mitchell <jack@embed.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that we filter out PATH to only the utilities we rely upon, the devshel
terminal was broken since it can no longer find the terminals. Even if
we fix that, the user couldn't access any of their commands within
devshell which somewhat defeats its purpose.
Add the original PATH back to the environment to restore that behaviour
since this is more in line with user expectations and it wouldn't be possible
(or desireable) to whitelist all the commands a user might want to use from
the shell.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As of this commit:
39f5a05152aa0c3503735e18dd3b4c066b284107
patchelf no longer inflates file sizes. Since the files are no longer
inflated by patchelf, we can skip using cp with the --sparse option.
More details as to how patchelf has changed are available in that
commit log.
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This class lets you use BBCLASSEXTEND to add a variant of the recipe that
fetches from an alternative URI (such as git:) instead of a tarball.
For example:
BBCLASSEXTEND = "devupstream:target"
SRC_URI_class-devupstream = "git://git.example.com/example"
SRCREV_class-devupstream = "abcd1234"
This variant will have DEFAULT_PREFERENCE set to -1 so it needs to be selected
to be used, and any development-specific tweaks can be done with the
class-devupstream override, for example:
DEPENDS_append_class-devupstream = " gperf-native"
do_configure_prepend_class-devupstream() {
touch ${S}/README
}
It currently only supports creating a development variant of the target recipe,
not native or nativesdk. The BBCLASSEXTEND syntax (devupstream:target) was
chosen so that support for native and nativesdk can be added at a later date.
Support for other version control systems such as subversion is limited, as
bitbake's automatic fetch dependencies on for example subversion-native are not
generated.
[ YOCTO #10215 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We currently have a determinism problem in that the host tools present
in PATH can influence the build. In particular, the presence of pkg-config
on the build host can mask missing pkgconfig class dependencies.
This adds in a new HOSTTOOLS variable and then uses it to set up a directory
of symlinks to the whitelisted host tools. This directory is placed as PATH
instead of the usual /usr/bin:/bin and so on.
This should improve determinism of builds and avoid the issues which have
been particularly obvious since the introduction of recipe specific sysroots.
If users find there is a tool missing, they can extend HOSTTOOLS from a global
class or global conf file.
Right now the settings should be enough to build everything in OE-Core.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* This is converging the recipes for go from
meta-virtualization and oe-meta-go
* Add recipes for go 1.7
* go.bbclass is added to ease out writing
recipes for go packages
* go-examples: Add an example, helloworld written in go
This should serve as temlate for writing go recipes
* Disable for musl, at least for now
* Disable for x32/ppc32 which is not supported
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We can't assume that source files are entirely UTF-8, so when copying the
license blocks open the file as binary instead of text.
[ YOCTO #11135 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Bitbake now supports an Amazon AWS S3 fetcher:
http://git.openembedded.org/bitbake/commit/?id=6fe07ed25457dd7952b60f4b2153d56b15d5eea6
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
.siginfo files are not being accessed from local or NFS-mounted
sstate mirrors when sstate package is installed, so their atime
is not updated. If sstate mirror is cleaned based on access time,
they get deleted, even though they are still being used.
Updated atime of .siginfo symlinks with 'touch -a'. This command
dereferences symlinks pointing to the local mirror and updates
atime of the .siginfo file on the mirror.
[YOCTO #10857]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Cleanup useradd class by removing the code made obsolete by
the introduction of Recipe Specific Sysroot.
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
kernel and external modules are still using gcc to build
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The previous wording, e.g.
ERROR: wget was skipped: incompatible with license GPLv3
isn't very clear and could be taken to imply that the recipe is
incompatible with its own license.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is needed for the make_scripts task.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If sdk ins't in BUILDHISTORY_FEATURES the get_extra_sdkinfo fails
because no information about sdk is generated in buildhistory repo.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All other fields are separated by tabs except KiB and binary package
name. This helps users, *cough managers*, who import this file into
MS Excel to calculate file system usage summaries.
Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Having no opt-out method and adding the task to linux-yocto.inc was
causing issues. For example, linux-yocto-dev would often fail because
it uses AUTOREV with no way to dynamically change the PV.
Add a variable to turn off the sanity check, allowing an easy opt out,
and set the opt-out variable in linux-yocto-dev, fixing the issue with
AUTOREV.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Patrick Ohly
brian avery
Florian Wickert
Amarnath Valluri
Peter Kjellerstedt
Anders Darander
Joshua Lock
Ed Bartosh
Mike Crowe
Leonardo Sandoval
Robert P. J. Day
Paul Eggleton
Juro Bystricky
Khem Raj
Richard Purdie
Alexander Kanavin
Jack Mitchell
Stephano Cetola
Ross Burton
Andre McCurdy
Maxin B. John
Aníbal Limón
Mikko Rapeli
California Sullivan