| Age | Commit message (Collapse) | Author |
|---|
|
When it was something else than /usr/libexec (e.g. when
installing native SDK packages), things broke down.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously this wasn't done, and so any packages installed from
populate_sdk would not have the postinsts fully executed
(particularly generation of various caches via running nativesdk or target
binaries with qemu wasn't working).
[YOCTO #12630]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As introduced by a56fb90dc3805494eeaf04c60538425e8d52efc5 ('base.bbclass
wipe ${S} before unpacking source') the base.bbclass uses a python
anonymous function to set the 'do_unpack' varflag 'cleandirs' to either
'${S}' or '${S}/patches' depending on equality of '${S}' and '${WORKDIR}'.
Not that this only differs from the way almost all other recipes set or
modify a tasks 'cleandirs' flag, it also has a significant impact on the
kernel.bbclass (and possibly further ones) and causes incorrect
behavior for rebuilds triggered by source modification, e.g. by a change
of the defconfig file for a kernel build.
The kernel.bbclass tries to extend do_unpack[cleandirs]:
| do_unpack[cleandirs] += " ${S} ${STAGING_KERNEL_DIR} ${B} ${STAGING_KERNEL_BUILDDIR}"
As python anonymous functions are evaluated at the very end of recipe
parsing, the d.setVarFlag('do_unpack', 'cleandirs', '${S}') statement in
base.bbclass will overwrite every modification to cleandirs that is done
as shown for the kernel class above.
As a result of this, a change to a kernels 'defconfig' will lead to an
updated defconfig file in ${WORKDIR}, but as ${B} never gets cleaned and
${B}/.config still exists, it will not be copied to ${B}/.config and
thus not find its way in the build kernel.
This is a severe issue for the kernel development and build process!
This patch changes setting of the cleandirs varflag in base.bbclass to
a simple variable assignment as almost all other recipes do it. This now
again allows overwriting or appending the varflag with common methods
such as done in kernel.bbclass.
This issue affects morty, pyro, rocko and master.
Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's possible that a trailing or extra slash somewhere in the external
source path could result in the directory not being removed from
cleandirs; it's also possible that a cleandirs entry is somewhere
underneath the source tree and that tree should never have parts of it
deleted by the build system. Use oe.path.is_path_parent() (which makes
paths absolute before checking them) to find out if any path in
cleandirs is anywhere underneath the external source path, and drop it
if it is.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the existing oe.recipeutils.split_var_value() function to split the
unexpanded value of the cleandirs varflag, in case it contains python
expressions - we don't want to split the expression itself as the chunks
will not expand properly individually and we can miss something that
expands to the source tree (and thus it can get deleted, the avoidance
of which is the whole point of this code).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
recipe parsing
When uninative is activated (poky's default) internal datastore variables are modified (NATIVELSBSTRING and SSTATEPOSTUNPACKFUNCS) to enable uninative
support. This is happening after parsing is done at the beginning of the build. On the next bitbake call the recipe would be parsed if the two
variables above were not added to the parsing whitelist BB_HASHCONFIG_WHITELIST.
The fix is to add these two variables to the recipe parsing whitelist BB_HASHCONFIG_WHITELIST, this is done at recipe parsing time, only when
uninative.bbclass is used.
Signed-off-by: Cuero Bugot <cbugot@sierrawireless.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Set KBUILD_BUILD_VERSION=1 to avoid build version being incremented on
every build. It is visible in the output of "cat /proc/version" after
the hash character.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the change from assuming kernels will be named "vmlinuz"
everywhere, to instead using KERNEL_IMAGETYPE, we require that
KERNEL_IMAGETYPE is set to something. Instead of setting the default in
multiple individual files, set it in default-distrovars.inc.
x86(-64) arches get bzImage as the default. Others get zImage as per
meta/conf/documentation.conf.
Also set KERNEL_IMAGETYPES, as we will eventually be switching away from
KERNEL_IMAGETYPE.
Thanks to Andre McCurdy <armccurdy@gmail.com> for the arch defaults
part.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recipes which use a shared workdir (e.g. gcc-runtine and libgcc) can
race over temporary files causing interesting build failures.
Using B instead of S avoids this problem.
[YOCTO #12605]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
any sense
The multilib version would race against then non-ml version leading
to all kinds of odd build failures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Debian anonscm service in Alioth is shutdown and thus
fetching sources fails.
https://wiki.debian.org/Alioth
"Alioth is broken, and there is nobody around to fix it. Don't ask the remaining people who give it life support to implement fixes and changes. It is being replaced by a cocktail of ?GitLab (see Salsa), read-only repos and keep-alive mechanisms. See below for more information."
https://wiki.debian.org/Salsa
"What is Salsa?
Salsa is the name of a collaborative development server for Debian based on the gitlab software. Salsa is supposed to provide the necessary tools for package maintainers, packaging teams and other Debian related individuals and groups for collaborative development.
What is the status of Salsa?
After various discussions about the future of Alioth, the Alioth Sprint in August 2017 gave birth to the initial setup of the the upcoming Salsa service. The productive weekend resulted in a working prototype and was launched as a beta in December 2017. It left its beta status in January 2018."
Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Apparently there are recipes in the wild which generate files with
filenames containing '$' characters - which cause errors during
packaging.
Instead of adding another special case to escape '$' characters when
constructing the command passed to oe.utils.getstatusoutput(), switch
to using single quotes to quote the path - and therefore make isELF()
consistent with the way filenames and paths are quoted by every other
caller of oe.utils.getstatusoutput() in oe-core.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Although get_filesystem_id() is a private API and never gets passed
a path containing spaces or other special characters, etc, quote the
path anyway for consistency.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Before, waf.bbclass would fail to catch FileNotFoundError. Now, it will
catch this error and say that waf doesn't exist.
Fixes [YOCTO 12553]
Signed-off-by: Amanda Brindle <amanda.r.brindle@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Setup environment for builds requiring binary reproducibility.
Determine and export SOURCE_DATE_EPOCH per each recipe.
This is a crucial step to achieve binary reproducibility.
The value for this variable (timestamp) is obtained after source code for
a recipe has been unpacked, but before it is patched. If the code sources
come from a GIT repo, we get the timestamp from the top commit. (GIT repo
does not preserve file mktime timestamps). Otherwise, if GIT repo is not
present, we try to get mtime from known files such as NEWS, ChangeLog, etc.
If this also fails, we go through all files and get the timestamp from the
youngest one. We create an individual timestamp for each recipe.
The timestamp is stored in the file '__source_date_epoch.txt' (in the folder
source-date-epoch_). Later on, each task reads this file and sets
the exported value of SOURCE_DATE_EPOCH to the value found in the file.
Uasge:
INHERIT += "reproducible_build"
[YOCTO#11178]
[YOCTO#11179]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
ERROR: distrho-ports-0.0.0+git999-r0 do_buildclean: oe_runmake failed
ERROR: distrho-ports-0.0.0+git999-r0 do_buildclean: Function failed: do_buildclean
ERROR: Logfile of failure stored in: <...>/temp/log.do_buildclean.17285
Log data follows:
| DEBUG: Executing shell function do_buildclean
| NOTE: make clean
| make clean -C libs/drowaudio
| make[1]: Entering directory '/home/a.mueller/data/oe-core/workspace/sources/distrho-ports/libs/drowaudio'
| make clean -C build-drowaudio
| make[2]: Entering directory '/home/a.mueller/data/oe-core/workspace/sources/distrho-ports/libs/drowaudio/build-drowaudio'
| make[2]: *** No rule to make target 'clean'. Stop.
| make[2]: Leaving directory '/home/a.mueller/data/oe-core/workspace/sources/distrho-ports/libs/drowaudio/build-drowaudio'
| make[1]: *** [Makefile:7: clean] Error 2
| make[1]: Leaving directory '/home/a.mueller/data/oe-core/workspace/sources/distrho-ports/libs/drowaudio'
| make: *** [Makefile:73: clean] Error 2
| ERROR: oe_runmake failed
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
To use 'glide' this class does the integration and reduces code
duplication.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
LZ4 format currently used by the Linux kernel is the 'legacy' format.
In order to avoid creating an image that can't be used as a compressed
initial ramdisk with Linux kernel, rename lz4_legacy to lz4.
[YOCTO #12461]
[YOCTO #12149]
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Kernel v4.14 and newer contain the following in their Makefile:
HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS)
HOSTLDFLAGS := $(HOST_LFS_LDFLAGS)
This breaks our menuconfig, because it can no longer find ncurses if its
not on the host machine. This can be seen in linux-yocto-dev, for
example:
[clsulliv@clsulliv build]$ bitbake virtual/kernel -c menuconfig
GEN ./Makefile
HOSTLD scripts/kconfig/mconf
/home/clsulliv/yocto/poky/build/tmp/hosttools/ld: cannot find -lncurses
/home/clsulliv/yocto/poky/build/tmp/hosttools/ld: cannot find -ltinfo
collect2: error: ld returned 1 exit status
make[3]: *** [scripts/Makefile.host:99: scripts/kconfig/mconf] Error 1
make[2]: *** [/home/clsulliv/yocto/poky/build/tmp/work-shared/intel-corei7-64/kernel-source/Makefile:504: menuconfig] Error 2
make[1]: *** [Makefile:146: sub-make] Error 2
make: *** [Makefile:24: __sub-make] Error 2
Command failed.
Press any key to continue...
Fix this by setting HOSTLDFLAGS to ${BUILD_LDFLAGS} in our
'make menuconfig' command.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
My attempt at only inheriting python3native if it was needed was broken and
didn't work, so back it out and always inherit.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If glibc is newer on the host than in uninative, the failure mode is
pretty nasty for clusters where the sstate is shared, including the Yocto
Project autobuilder.
This check aborts the use of uninative in such scenarios where a newer
glibc version appears and avoids corruption of sstate caches.
We use ldd to check the glibc version since that is included in libc-bin
(or equivalent) which locales use so it should always be present.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows catching errors in the scriptlets which would otherwise
go unnoticed, e.g. this sequence:
====
bogus_command
proper_command
====
would work just fine without any visible warnings or errors.
This was previously done only for rpm packages; this patch replaces
the rpm-specific tweak with one that works for all package types.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Export environmental variables needed for binary reproducibility with consistent values.
This class can be used either directly via:
INHERIT += "reproducible_build_simple"
or can be inherited by a more complex/complete bbclass, for example a bblass which
will crack SOURCE_DATE_EPOCH for each recipe.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace the occurences of BUILD_REPRODUCIBLE_BINARIES with expanded
values ${BUILD_REPRODUCIBLE_BINARIES} so the variable does not need to be
exported.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As of the 4.13 kernel, there are configuration + linker combinations
that do not need (or build) crtsavres.o for ppc64 targets. The commit
of interest is:
commit efe0160cfd40a99c052a00e174787c1f4158a9cd
Author: Nicholas Piggin <npiggin@gmail.com>
Date: Fri May 12 01:56:52 2017 +1000
powerpc/64: Linker on-demand sfpr functions for modules
For final link, the powerpc64 linker generates fpr save/restore
functions on-demand, placing them in the .sfpr section. Starting with
binutils 2.25, these can be provided for non-final links with
--save-restore-funcs. Use that where possible for module links.
This saves about 200 bytes per module (~60kB) on powernv defconfig
build.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As such, our arch test for crtsavres.o is not enough, we add a secondary
existence check before trying the copy.
[YOCTO #12576]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Respect GTKDOC_ENABLED when inheriting python3native and DEPENDing on
qemu-native, as they're not needed when disabled.
python3native is required as otherwise the host Python is most likely used which
may or may not have python3-six installed (a requirement of gtk-doc).
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We should use the value of CC for the c compiler setting in cross
compilation configuration file for meson. For example, if we only
use ${HOST_PREFIX}gcc instead of ${CC}, we would meet the following
do_compile failure for systemd.
cc1: fatal error: linux/capability.h: No such file or directory
Do the same change for LD, AR, NM, STRIP and READELF.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Many go packages can take advantage of dep tool since
they manage their own dependencies, this class helps
in using go dep tool for such packages
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With go1.10 the NOPIE flags are only required for
MIPS target builds, and are now incompatible for
the other architectures.
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
While useful on embedded devices for saving disk space, use
of shared runtime in Go is not the usual practice, so disable
it for nativesdk builds. We don't use it for native builds,
either, so this makes the SDK match the native environment
more closely.
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Don't enable verbose test output (-test.v)
by default, as it generates too much noise
for automated results parsing
* Override do_install_ptest_base in the bbclass,
so recipes can provide their own modifications
with do_install_ptest.
* Improve the generated run-ptest script to better
handle large numbers of tests, and to generate
'status: test name' output similar to Automake
tests.
* Install all non-vendored 'testdata' directories
from the source into the ptest package, as some
packages share test data among multiple tests.
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Any directory in a Go package's source tree called
'testdata' contains test data, and isn't necessary
for building.
Some packages include ELF files and other binaries
as test data, and staging them in the sysroot and
-dev package leads to unnecessary QA warnings.
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The 'go env' in the do_compile function and
the set -x/+x in the do_install_ptest function
were used for debugging the bbclass, and aren't
really needed.
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
and export it. Go 1.10 now supports using this
separate variable locating its temporary files.
TMPDIR is still set, for compatibility with go1.9;
that can be dropped once 1.9 is retired.
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Go 1.10 adds support for selecting hard/soft float
object code through the GOMIPS environment variable.
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Patches and recipes reworked for go 1.10's significant
changes to its bootstrap and build steps.
* Update go1.4 source tarball used for go-native
bootstrapping to the version recommended
in the current go documentation
* Remove test data from installed sources to eliminate
some packaging QA warnings
* Set GOCACHE to 'off' to disable 1.10's build caching
in the go recipes and bbclass
* Update go_do_compile to compile both static and
dynamic objects dynamic linking is in use, since
go1.10's build tool is pickier about this
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
There's no need to add to the local copy of overrides and then not do
anything with it.
Now that this function is being used in package creation it was causing
sstate issues as well, as MACHINE is always in OVERRIDES, so something
trivial such as the name of the MACHINE would cause the hash to change.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There's no need to add to the local copy of overrides and then not do
anything with it.
Now that this function is being used in package creation it was causing
sstate issues as well, as MACHINE is always in OVERRIDES, so something
trivial such as the name of the MACHINE would cause the hash to change.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We can't guarantee vmlinuz anymore. Use KERNEL_IMAGETYPE instead.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This class is useful on its own and can be used to create configuration
recipes.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We can't guarantee the kernel will be named vmlinuz anymore. Use
KERNEL_IMAGETYPE instead.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than renaming the kernel to vmlinuz and assuming the name is
vmlinuz in the grub.cfg, copy to ${KERNEL_IMAGETYPE} and also use that
value in the grub.cfg file.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I can't find VM_DEFAULT_KERNEL used anywhere else, and we should not be
statically installing the kernel as vmlinuz.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This part is useful on its own, whereas the whole class together is
specific for image-live.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Enable easier testing of perl modules
- Installs t/* to PTEST_PATH
- Uses common run-ptest script
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we're building a SDK and we're using glibc so may be installing locales,
add a build-dependency on natiesdk-glibc-locale so the locales we need will
exist.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Handling of backfilling is trickier than you'd think. We need this to execute
early enough that the user will see the changes in bitbake -e and other output
yet late enough that the virtclass extensions have changed the tunes before
it executes.
It makes more sense to execute this at anonymous python time now bitbake -e
correctly handles this and that unbreaks multilib corruption of these variables.
[YOCTO #12373]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Alexander Kanavin
Enrico Jorns
Paul Eggleton
Cuero Bugot
Jonathan Liu
California Sullivan
Richard Purdie
Mikko Rapeli
Andre McCurdy
Amanda Brindle
Juro Bystricky
Andreas Müller
Otavio Salvador
Maxin B. John
Khem Raj
Ross Burton
Bruce Ashfield
Chen Qi
Matt Madison
Tim Orling