| Age | Commit message (Collapse) | Author |
|---|
|
[YOCTO #14948]
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The trailing slash in ${B} caused -fdebug-prefix-map=${B}=... to not
match as intended, resulting in ${TMPDIR} ending up in files in
${PN}-dbg when externalsrc was in use, which in turn triggered buildpath
QA warnings.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
* fix issue introduced in:
https://git.openembedded.org/openembedded-core/commit/?id=95fbac8dcad6c93f4c9737e9fe13e92ab6befa09
* it added check for s_dir + git-dir (typically '.git') isn't
the same as ${TOPDIR} + git-dir, but due to copy-paste issue
it was just comparing it with s_dir + git-dir again, resulting
in most external repos (where git-dir is '.git') to be processed
as regular directory (not taking advantage of git write-tree).
* normally this wouldn't be an issue, but for big repo with a lot of
files this added a lot of checksums in:
d.setVarFlag('do_compile', 'file-checksums', '${@srctree_hash_files(d)}')
and I mean *a lot, e.g. in chromium build it was 380227 paths
which still wouldn't that bad, but the checksum processing in
siggen.py isn't trivial and just looping through all these
checksums takes very long time (over 1000sec on fast NVME drive
with warm cache) and then
https://git.openembedded.org/bitbake/commit/?id=b4975d2ecf615ac4c240808fbc5a3f879a93846b
made the processing a bit more complicated and the loop in
get_taskhash() function took 6448sec and to make things worse
there was no output from bitbake during that time, so even with -DDD
it looks like this:
DEBUG: virtual/libgles2 resolved to: mesa (langdale/oe-core/meta/recipes-graphics/mesa/mesa_22.2.0.bb)
Bitbake still alive (no events for 600s). Active tasks:
Bitbake still alive (no events for 1200s). Active tasks:
Bitbake still alive (no events for 1800s). Active tasks:
Bitbake still alive (no events for 2400s). Active tasks:
Bitbake still alive (no events for 3000s). Active tasks:
Bitbake still alive (no events for 3600s). Active tasks:
Bitbake still alive (no events for 4200s). Active tasks:
Bitbake still alive (no events for 4800s). Active tasks:
Bitbake still alive (no events for 5400s). Active tasks:
Bitbake still alive (no events for 6000s). Active tasks:
DEBUG: Starting bitbake-worker
without -DDD it will get stuck for almost 2 hours in:
"Initialising tasks..."
before it finally writes sstate summary like:
"Sstate summary: Wanted 3102 Local 0 Mirrors 0 Missed 3102 Current 1483 (0% match, 32% complete)"
* fix the copy&paste typo to use git work-tree in most cases, but
be aware that this issue still exists for huge local source
trees not in git
[YOCTO #14942]
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Signed-off-by: Keiya Nobuta <nobuta.keiya@fujitsu.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Support downloading crate files from a mirror at SOURCE_MIRROR_URL.
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The externalsrc class was moved to classes-recipe as part of oe-core
f5c1280, but it can be used in both recipe and global contexts so move
it back to classes/.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The character '%' is not a valid part of a recipe filename and has been used
here only to suggest a wildcard regarding the recipe's version, see reply [1] in
a companioned thread. Correct that by using the current recipe version instead.
[1] https://lists.yoctoproject.org/g/docs/message/3165
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OverlayFS classes belong to a recipe scope
Signed-off-by: Vyacheslav Yurkov <v.yurkov@precitec.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The removed command was explicitly marked as transitional in commit [1] roughly
three years ago, so finally clean up.
[1] 40d74cb1d0dd ("icecc: Export ICECC_CC and friends via wrapper-script")
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We can have multiple processes reading the database at the same time, and
cursors only release their locks when they're garbage collected.
This might be the cause of random sqlite errors on the autobuilder, so
explicitly close the cursors when we're done with them.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
The CVE check database needs to have a shared lock acquired on it before
it is accessed. This to prevent cve-update-db-native from deleting the
database file out from underneath it.
[YOCTO #14899]
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When a link is pointing to location inaccessible to build user (e.g. "/root/something"),
filepath.is_file() throws "PermissionError: [Errno 13] Permission denied".
Fix this by first checking if it is a link.
Signed-off-by: Peter Marko <peter.marko@siemens.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
shared source
This fix a race that happens when building some of the followning recipes
with kernel at same time.
The kernelsrc uses the kernel shared source dir as their source
S = "${STAGING_KERNEL_DIR}" and this will cause a race in the
do_unpack_and_patch task, when bitbake runs the
bb.build.exec_func('do_unpack', d) because do_unpack will
clean the source dir on startup.
| ok: note that S != "${STAGING_KERNEL_DIR} for this ones
openembedded-core/meta/recipes-kernel/perf/perf.bb:inherit kernelsrc
meta-openembedded/meta-oe/recipes-kernel/usbip-tools/usbip-tools.bb:inherit kernelsrc autotools-brokensep
| broken
meta-openembedded/meta-oe/recipes-kernel/cpupower/cpupower.bb:inherit kernelsrc kernel-arch bash-completion
meta-openembedded/meta-oe/recipes-kernel/spidev-test/spidev-test.bb:inherit bash-completion kernelsrc kernel-arch
meta-openembedded/meta-oe/recipes-kernel/intel-speed-select/intel-speed-select.bb:inherit kernelsrc
meta-openembedded/meta-oe/recipes-kernel/bpftool/bpftool.bb:inherit bash-completion kernelsrc kernel-arch
The issue can be replicated with:
INHERIT += "archiver"
ARCHIVER_MODE[src] = "original"
ARCHIVER_MODE[diff] = "1"
And:
R=<recipe> bitbake -c cleansstate virtual/kernel $R && bitbake $R
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move classes to classes-global or classes-recipe as appropriate to take
advantage of new bitbake functionality to check class scope/usage.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make the code more generic to allow for the potential incomming class
layout changes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As stated in our top level license files, the license is MIT unless
otherwise stated. Add SPDX identifers accordingly. Replace older
license statementa with the standardised syntax. Also drop "All
Rights Reserved" expression as it isn't used now, doesn't mean anything
and is confusing.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Where there isn't a copyright statement, add one to make it explicit.
Also drop editor config lines where they were present.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The class is mainly an image based class but one recipe does need to look
at values shared with the class and isn't an image. Move this to a conf
file instead, avoiding the need to pollute all recipes globally.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These match the default from the class so drop them. We then always
generate all targets so remove the configuration from the class.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The class only makes sense in the conext of images, not globally so
include as such.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
utils already has a create_wrapper function which I tried to use from cargo
and got unexpected results. Rename the rust function to avoid this conflict
of named.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that target config json is provided by rust-target-config.bbclass,
the need for the cross and crosssdk recipes is removed. Drop them and
simplify dependencies accordingly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current libc handling code is simply wrong in many cases. Simplify it
to a check of the triplet for musl handling which is much simpler and less
error prone when handling things like nativesdk targets.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Ensure the 'target' data is set for both HOST and TARGET queries
as appropriate to work correctly in cross configurations.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Tweak the armv7 workaround to work for cross environments and as a host
triplet and not just as a target.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Improve the common class to handle BUILD_SYS as well as host and target,
removing the need to a workaround in the rust recipe.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move the "unknown" vendor workaround used during bootstrap to a
central location so it is applied consistently to all RUST_BUILD_SYS
values rather than some subset.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of generating target configuration files centrally and often getting
it wrong, or having trouble finding the right set, generate them dynamically
from the bbclass into WORKDIR per recipe.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code was using a mixture of XXX_SYS and RUST_XXX_SYS. Use
RUST_XXX_SYS consistently and add the variables to the global exclsion
on signatures as they're reflected in the directory triplets and trying
to filter them out the hashes separately is too painful.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For musl we need to be able to add a library to the end of the linker commandline.
Rework the wrapper code to be able to do this through a new variable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These variables don't need to be exported into the environment, which reduces
the scope of rebuilds when variable values change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Similarly to CC and CCLD, handle CXX flags too.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add MIPS n32 target information. This appears to be correct but
building libstd-rs for the target doesn't work.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The n32 MIPS rust SDK doesn't quite build (libstd-rs fails with an llvm
register issue). Disable it for now, someone with interest in having it working
can fix if/as/when.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Similarly to what native.bbclass does, clear TUNE_FEATURES since these
aren't appropriate to the nativesdk build. This saves us having to change
down signature issues due to data in this variable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable multilib and wic at the same time and we'll meet the
following error.
ERROR: Nothing PROVIDES 'virtual/i686-wrsmllib32-linux-binutils'
Adjust the dependency to take multilib into consideration.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Otherwise spdx can have references for data that is not packed
in the package delivered because this contol data is temporarly
and only exist while the package is been write.
During do_package_write_ipk task in do_package_ipk the control
files is cleaned up at the end. This can create a race condiction
when the do_create_spdx task runs the add_package_files function
and these files is been deleted at same time in the
task do_package_write_ipk.
ERROR: alsa-topology-conf-1.2.5.1-r0 do_create_spdx: Error executing a python function in exec_func_python() autogenerated:
The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_func_python() autogenerated', lineno: 2, function: <module>
0001:
*** 0002:do_create_spdx(d)
0003:
File: '/srv/oe/build/conf/../../layers/openembedded-core/meta/classes/create-spdx.bbclass', lineno: 567, function: do_create_spdx
0563: package_doc.add_relationship(package_doc, "DESCRIBES", spdx_package)
0564:
0565: package_archive = deploy_dir_spdx / "packages" / (package_doc.name + ".tar.zst")
0566: with optional_tarfile(package_archive, archive_packaged) as archive:
*** 0567: package_files = add_package_files(
0568: d,
0569: package_doc,
0570: spdx_package,
0571: pkgdest / package,
File: '/srv/oe/build/conf/../../layers/openembedded-core/meta/classes/create-spdx.bbclass', lineno: 234, function: add_package_files
0230: info.mtime = source_date_epoch
0231:
0232: archive.addfile(info, f)
0233:
*** 0234: sha1 = bb.utils.sha1_file(filepath)
0235: sha1s.append(sha1)
0236: spdx_file.checksums.append(oe.spdx.SPDXChecksum(
0237: algorithm="SHA1",
0238: checksumValue=sha1,
File: '/srv/oe/bitbake/lib/bb/utils.py', lineno: 559, function: sha1_file
0555: """
0556: Return the hex string representation of the SHA1 checksum of the filename
0557: """
0558: import hashlib
*** 0559: return _hasher(hashlib.sha1(), filename)
0560:
0561:def sha384_file(filename):
0562: """
0563: Return the hex string representation of the SHA384 checksum of the filename
File: '/srv/oe/bitbake/lib/bb/utils.py', lineno: 528, function: _hasher
0524:
0525:def _hasher(method, filename):
0526: import mmap
0527:
*** 0528: with open(filename, "rb") as f:
0529: try:
0530: with mmap.mmap(f.fileno(), 0, access=mmap.ACCESS_READ) as mm:
0531: for chunk in iter(lambda: mm.read(8192), b''):
0532: method.update(chunk)
Exception: FileNotFoundError: [Errno 2] No such file or directory: '/srv/oe/build/tmp-lmp/work/all-lmp-linux/alsa-topology-conf/1.2.5.1-r0/packages-split/alsa-topology-conf/CONTROL/control'
ERROR: Logfile of failure stored in: /srv/oe/build/tmp-lmp/work/all-lmp-linux/alsa-topology-conf/1.2.5.1-r0/temp/log.do_create_spdx.998864
INFO: recipe alsa-topology-conf-1.2.5.1-r0: task do_create_spdx: Failed
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Add a comment so that users grepping for "github" or "gitlab" will find
this code (since the regex wont).
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If an invalid key is used, the class ignores the error, with an
indeterminate result. In my case, the problem surfaced in do_deploy:
```
| cp: cannot stat '/.../build/tmp/work/imx6qdlsabresd-fsl-linux-gnueabi/u-boot-imx-mfgtool/2022.04-r0/deploy-u-boot-imx-mfgtool/u-boot.imx': No such file or
| directory
```
The root cause of this was that the uboot config key did not match
a valid option. With the fix, the error is caught by the class:
```
ERROR: Nothing PROVIDES 'u-boot-imx-mfgtool'
u-boot-imx-mfgtool was skipped: The selected UBOOT_CONFIG key ['mfgtool'] has no match in dict_keys(['sd-fslc', 'sd-imx', 'sd-optee-imx', 'sata-imx', 'mfgtool-imx']).
```
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Wic can build an unified kernel image, but this needs the cross-objcopy
from binutils.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
The correct field name is "supplier" according to SPDX schema.
The "supplier" field translates to "PackageSupplier", but that's for
tag-value format.
Signed-off-by: Mihai Lindner <mihai.lindner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
replicate (e)SDK
Specifically:
1. Place the environment setup file into $B and not into $TMPDIR,
so that the recipe using the class can itself better decide what to do with the file.
2. Use global, unified sysroots (provided through build-sysroots recipe)
and not recipe-specific ones, as this allows flexible on-the-fly management of what
libraries are available to build applications, without having to modify any
recipes, similar to eSDK 'extensible' part.
This also requires adjustment of the sstate sametune_samegsigs test, as meta-ide-support
becomes dependent on $MACHINE (unified sysroots have it in their paths)
and needs to be excluded from the test.
3. Add a few missing settings that have been added to SDK environment files.
4. Add a snippet to the environment setup file that also runs the relocation scripts.
In regular SDKs this is executed by the SDK installer, in direct SDK we can do it when
setting up the environment.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove as commit b3afe7d redifines it.
https://git.openembedded.org/openembedded-core/commit/?id=b3afe7d9bd25a943e947de3ec064ea245173c5a8
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Correct the override name used for rust toolchain removal from the mingw sdk.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a new variable SDK_TOOLCHAIN_LANGS to allow different language support
to be selected within SDKs. Initially supported options are rust and go.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Michael Opdenacker
Peter Kjellerstedt
Martin Jansa
Keiya Nobuta
Adrian Freihofer
Ross Burton
Ulrich Ölmann
Vyacheslav Yurkov
Joshua Watt
Richard Purdie
Peter Marko
Jose Quaresma
Chen Qi
Tom Hochstein
Mihai Lindner
Alexander Kanavin