| Age | Commit message (Collapse) | Author |
|---|
|
Currently the functionality checks for the "u" and "g" flags to create users and
groups, but not the "m" flag to add users to groups. This change first checks to
be sure that the users and groups are created, creates them if necessary, then
adds the user to the group.
(From OE-Core rev: f0a77bee3d092cf79b7e584b943a623eddd6e13d)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This task runs all functions in IMAGE_QA_COMMANDS after the image
construction has completed in order to validate the resulting image.
Image sanity checks should either be Python functions which raise
bb.build.FuncFailed on failure or shell functions with return a
non-zero exit code.
Python functions may instead raise an oe.utils.ImageQAFailed
Exception which takes an extra argument, a description of the
failure.
python image_check_python_ok () {
if True:
raise bb.build.FuncFailed('This check always fails')
else:
bb.note("Nothing to see here")
}
image_check_shell_ok () {
if true
exit 1
else
exit 0
fi
}
[YOCTO #9448]
(From OE-Core rev: c9bef2ecf1a30159d11781184829f41844a58c13)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There's no need to set these as the restore from sstate will create the
directories as required.
(From OE-Core rev: 3ab3ebc06d22f0776091e39237235ea50c4503b2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use IMAGE_CLASSES which is only seen by image recipe.
(From OE-Core rev: 7be8f1a9dad4512c3a979ad744e223edb38fccc6)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To remove potentially personal information and reduce irrelevant noise when
searching for similar reports the error reporting class removes ${TOPDIR} from
the logs. Whilst this is valid intention, the replacement of ' ' results in
potentially confusing logs as it appears that builds are happening in /tmp, or
whitespace can appear in places where it isn't allowed which can look like a
bug.
Solve both of these by replacing the value of TOPDIR with the literal string
TOPDIR.
Also replace TMPDIR after TOPDIR, as it's not uncommon to have TMPDIR somewhere
other than directly under TOPDIR.
(From OE-Core rev: 95794e261628f83ddab0aa7b8bafb6409cc9deb5)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently PV is defined in meta/conf/bitbake.conf as a python
expression: "${@bb.parse.BBHandler.vars_from_file(d.getVar('FILE',
False),d)[1] or '1.0'}". As FILE is whitelisted it causes PV to
not depend on it. This causes sstate code to not detect that
PV changes when recipe filename changes.
Making PV to explicitly depend on PV variable value overrides default
behaviour. Instead of depending on python expression bitbake depends
on evaluated value of PV variable, which should fix the above
mentioned issue.
[YOCTO #9806]
(From OE-Core rev: 918646ca803d56004fb0ab7c21e86cc9cb14513d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These files are treated as the contents of a bitbake variable, so usual
bitbake variable references are supported. I considered using another
templating mechanism, for example the one used by yocto-layer, but then we'd
end up largely mapping metadata variables to template fields anyway, which is
a pointless indirection. Let bitbake expand the variables directly instead.
This feature lets us, for example, reference ${APPEND} in --append, and avoid
hardcoding the serial console tty in the wks file, and let the user's changes
to APPEND affect wic the way they do the other image construction mechanisms.
The template is read in and set in a variable at parse time, so changes to the
variables referenced by the template will result in rebuilding the image.
(From OE-Core rev: 51cb21fe5f050874d52f5b05a8a1de79ea4ebf2f)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a bit nicer to work with, and easier to override.
(From OE-Core rev: 44f1d3cc613563b8d5be61a2648d0cd336fea728)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Also delete the removal of suduko for qemumips, as galculator builds fine on
that hardware now.
(From OE-Core rev: 4a81b3f669073455c9b2ee1514c43b96df9f7faa)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We can reach the method in toaster.bbclass which tries to read from
the files-in-image.txt file via a build which doesn't create that
file (e.g. "bitbake core-image-minimal -c rootfs"). This causes
the build to fail with an exception.
Check that this file exists before trying to read from it.
[YOCTO #9784]
(From OE-Core rev: 8b369cdd73ab17cdf834a591b97b25840caeb740)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
toaster.bbclass does a scan of the image deploy and SDK directories
when a build finishes. However, this brings no benefit and could be
better managed and made easier to modify if moved to toasterui and
carried out when the BuildCompleted event occurs.
Remove the image scan code from toaster.bbclass, prior to moving it
to toasterui and buildinfohelper.
Also remove the license manifest update code, as this can also be
done from toasterui.
The postfuncs for do_populate_sdk are retained, but no longer
do the directory scan for SDK artifacts. Instead, they fire
an event with the value of the TOOLCHAIN_OUTPUTNAME variable,
as this is only accessible at the point when the do_populate_sdk
and do_populate_sdk_ext tasks are run. The value of this can then
be used by buildinfohelper to find the SDK artifacts produced by a
target.
[YOCTO #9002]
(From OE-Core rev: 67ebb5406c0fcdd1b28bf446249aa6fe34a741a8)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In Python3 the itertools module's imap function has been migrated to the
globalname space as map(). Calling itertools.imap() will fail because it
no longer exists.
(From OE-Core rev: da7a2c7b00b40a8759dbe9f4ab6df3e337e3d6b6)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was rounded in python 2, but python 3 changed the default behavior of /.
We could switch to the same behavior as previous by switching to // rather
than /, but there's value in keeping at least one decimal point, to avoid the
misleading case where it says 0% but the reuse is non-zero.
(From OE-Core rev: 35d36a4d097ce8a0fd0be2f795e3d5052d4f753c)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- libc-package.bbclass: Do not use --old-style
This option has been dropped from latest glibc
(From OE-Core rev: 78ab1e7cdedc6a73395af5d053b49cf081416732)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
localedef handles attempts to read/write the archive in parallel correctly by
creating the file atomically, gracefully handling racing to create, and has
exclusive locks when writing. Therefore I can't see any purpose to copying the
archive to /tmp and back again when manipulating it.
(From OE-Core rev: 016e4a53e3251ffcdb3c260dd2837507b520ffa6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fragment dates from when this class was used for more than just glibc
locale packaging, and as glibc-locale disables do_configure it can't have been
executed.
(From OE-Core rev: 6483fbe70e52ec9a53c918fe81162fd0c566f80f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Tasks for image recipes cannot be locked - there's nothing to restore
from shared state to cover them and as a result, if you had "live" in
IMAGE_FSTYPES the build would fail with "taskhash mismatch" errors for
do_rootfs and do_image_complete for the initramfs image recipe, since it
had to try to run those. We should probably catch that issue earlier in
the build and produce a proper error, but for now at least exclude these
signatures from the locked-sigs.inc file so that extensible SDK
installers built when IMAGE_FSTYPES includes "live". (It turned out we
already had code to find other image tasks in the task list in order to
generate the list of install targets.)
Follow-up fix for [YOCTO #9826].
(From OE-Core rev: a7133bf6bb650b944d29d01129f36a56282acd2b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you build an extensible SDK for an image and IMAGE_FSTYPES includes
"live" then the extensible SDK will fail to install with a bunch of
unexpected task execution errors, matching the missing items required to
build the live image. The issue was we were still depending on do_rootfs
rather than do_image_complete. The fix was slightly more complicated
than just changing the task name as do_image_complete's dependencies are
in the form of dependencies on tasks within the same recipe (represented
in the "deps" varflag rather than the "depends" varflag).
Fixes [YOCTO #9826].
(From OE-Core rev: 2b9c092e89b421bf7fd6a7c9604a83ae420d85ba)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Opening text stream in unbuffered mode raises the following
exception In Python 3:
ValueError: can't have unbuffered text I/O
Fixed by leaving std* streams in text mode and flushing
stdout explicitly.
(From OE-Core rev: 732001cb268683f5b56e251e2964ec5b694a2147)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
stdout is already unbuffered in bitbake code. Attempt to
do it again in devshell.bbclass causes this crash when
running devpyshell:
File "scripts/oepydevshell-internal.py", line 29, in <module>
pty = open(sys.argv[1], "w+b", 0)
IOError: [Errno 13] Permission denied: '/dev/pts/6'
(From OE-Core rev: 875910451e1ce97d0c42b41b1140c8160ed1f40a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cmake outputs percentage complete as part of its compilation process, so
we can enable BitBake's new progress scanning for do_compile here.
(From OE-Core rev: f77ea95ba5cd337f01f2a1b4fe9466feb6af9440)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the new BB_SETSCENE_ENFORCE functionality to avoid having to run
bitbake twice on installing the extensible SDK - we can now do it all in
one invocation which not only takes less time, but we should also get
more meaningful errors for some types of failure, in particular where
downloading from an sstate mirror fails.
One result of this change is that you get the errors printed on the
console during normal output rather than this going to the
preparing_build_system.log file first. In OE-Core revision
227d2cbf9e0b8c35fa6644e3d72e0699db9607fa, we changed to always print the
contents of preparing_build_system.log on failure, but now at least the
error contents of that log is duplicated. Besides, I intentionally
didn't print out the contents of that log during normal usage because
it's quite verbose - the bug that we were attempting to fix was about
not getting this information when seeing failures in the automated
tests, thus I've moved printing the log to the test handling code
instead.
Part of the implementation of [YOCTO #9367].
(From OE-Core rev: e1390c1ef85862b91b067ab24f3c06ca506155ad)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With Python 3 we get a bytes object from the command output and not a
string, which gives some ugly formatting for error messages unless you
decode it first.
(From OE-Core rev: 798bec6fe43116b51247284eb4e415337b2e8e04)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If BB_SETSCENE_ENFORCE is set to "1" and an sstate package fails to
download outside of the whitelist specified by
BB_SETSCENE_ENFORCE_WHITELIST, then fail immediately so you can tell
that the problem was caused by failing to restore the task from sstate.
Part of the implementation of [YOCTO #9367].
(From OE-Core rev: 9e711b54487c3141d7264b8cf0d74f9465020190)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Show progress through bitbake's standard terminal UI when checking for
shared state object availability, since this can take some time if there
are a large number of tasks to be executed and/or the network connection
is slow.
Part of the implementation for [YOCTO #5853].
(From OE-Core rev: 1a064385d6921ec90b33c9064dafaab11a36267c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the new task progress functionality to report progress during
do_rootfs. This is a little coarse and ideally we would have some
progress within the installation section, but it's better than
nothing.
(From OE-Core rev: 370f08d434480c1790950e40db8f7687da78cb14)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Otherwise architecture-independent pkg-config files such as wayland-protocols
won't be found in the SDK.
(From OE-Core rev: 1bea760f3f462fdcc3eefc0d8597688d61447ddd)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When splitting kernel modules into individual packages, such packages take
their names from the module name. This is OK under most of the circumstances.
However, it may lead to package naming collisions if there exists two
modules with the same name.
Situations like this can occur when building testing modules. For instance,
there exists testing versions of the modules for non-volatile memory that
are built with different linker options but bear the same module name. If
one wants to package such modules, it is be good to be able to name
packages differently. This can be done by prefixing the package name with
a KERNEL_MODULE_PACKAGE_PREFIX that can be set by the recipes that inherit
from module.bbclass.
Cc: Megha Dey <megha.dey@intel.com>
(From OE-Core rev: 4f941e8c5ee8e95291c3beff0a2798aa13f8dfc8)
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If linkpath points to the a file in KERNEL_OUTPUT_DIR, rather than
outside, then symlink creation for the bundled initramfs image files
fails.
This is because in that case $linkpath.initramfs and $realpath.initramfs
are in the same directory, KERNEL_OUTPUT_DIR, and hence are the same.
Since we just created $realpath.initramfs, creating a symlink with the
same name will fail.
Given that $linkpath is not necessarily the same as the kernel image type,
just removing this symlink creation is not the right thing to do, as
in that case kernel_do_deploy() wouldn't find the bundled file.
What we really want is a symlink from the name of the initramfs-bundled
kernel image type to the real initramfs-bundled kernel image, as that is
what is actually used later in do_deploy().
This brings the code path for when $KERNEL_OUTPUT_DIR/$type is a symlink
in line with when it is not.
(From OE-Core rev: 7585ebbbe4e95870ab7475737ed5b94255351c72)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If multiple kernel image types have been specified, only the very first
one would receive a symlink in DEPLOYDIR.
The reason is that we're looping over the list of image types and check
if a bundled initramfs images exists using a relative path. As part of
the loop we're changing the current directory, hence all additional
iterations fail to see the files we're looking for, and hence no symlinks
are being created.
Fix by not changing the directory and adjusting the ln invocation instead.
(From OE-Core rev: 2a6ac8ca71b669b8653eb19417faf58575385a21)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
DEPENDS +=
Otherwise -native variants of recipes that use these classes don't get a proper python[3]-native
dependency for some reason.
(From OE-Core rev: 834514198f9e39ce323270567e3ce744f763b637)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
STAGING_LIBDIR, PYTHON variables
We patch Python's distutils modules to access STAGING_INCDIR/LIBDIR, so when
they are not set, scripts that utilize distutils (e.g. python-config) fail.
Several recipes need to export those manually to prevent such failures,
so let's do that in the class instead.
PYTHON variable is exported because otherwise autotools' python.m4
macro will pick up its own internal default, which may not be the version
that we want.
glib recipe in particular was previously using Python 2.x during build due to python.m4
defaulting to it - now it's using Python 3.x, and so needs a small fix in
deletion of *.pyc files.
(From OE-Core rev: c1e0eb62f2d89b10b187016200018830b1c77945)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using UBOOT_CONFIG format, the final u-boot binary for each config
may have different names. Extend UBOOT_CONFIG format to support different
binary to be copied.
The new format is supposed to be compatible with old one as ${UBOOT_BINARY}
is copied by default, and images,binary can be empty.
An example format to specify it, in the machine, is:
UBOOT_CONFIG ??= "sdcard-ifc sdcard-qspi lpuart qspi secure-boot nor"
UBOOT_CONFIG[nor] = "ls1021atwr_nor_config,,u-boot-dtb.bin"
UBOOT_CONFIG[sdcard-ifc] = "ls1021atwr_sdcard_ifc_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[sdcard-qspi] = "ls1021atwr_sdcard_qspi_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[lpuart] = "ls1021atwr_nor_lpuart_config,,u-boot-dtb.bin"
UBOOT_CONFIG[qspi] = "ls1021atwr_qspi_config,,u-boot-dtb.bin"
UBOOT_CONFIG[secure-boot] = "ls1021atwr_nor_SECURE_BOOT_config"
(From OE-Core rev: 2a5c484f314ddc75cab5f0d01b0215d7fc405b6b)
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a recipe is using the autotools class then presumably it is using Makefiles.
However the default do_compile() is forgiving and silently handles a missing
makefile, which means that if a recipe is using a hand-coded static Makefile
(e.g. git) but doesn't use brokensep the recipe will fail in do_install.
To make debugging this easier, override do_compile in autotools so that it fails
if a Makefile isn't present.
(From OE-Core rev: 14839515301754e0b512fe3054d95dabc77ad829)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This doubles the amount of extra space that is provided for SMART and
RPM, as they consume more disk space during qa testing via testimage
[YOCTO #9800]
(From OE-Core rev: 2d636068d9d3a1ea2db3ace49462be13ba9ef125)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit 642bd49964690259328f506df41a1764c5ac6226.
This broke "bitbake cmake":
| CMake Error at /home/jku/src/poky/build/tmp/work/core2-64-poky-linux/cmake/3.5.2-r0/toolchain.cmake:34 (list):
| Syntax error in cmake code at
|
| /home/jku/src/poky/build/tmp/work/core2-64-poky-linux/cmake/3.5.2-r0/toolchain.cmake:34
|
| when parsing string
|
| /home/jku/src/poky/build/tmp/sysroots/qemux86-64/usr/share/cmake-\3.5.${CMAKE_MINOR_VERSION}/Modules/
|
| Invalid character escape '\3'.
| Call Stack (most recent call first):
| /home/jku/src/poky/build/tmp/sysroots/x86_64-linux/usr/share/cmake-3.5/Modules/CMakeDetermineSystem.cmake:98 (include)
| CMakeLists.txt:19 (project)
https://autobuilder.yoctoproject.org/main/builders/nightly-world/builds/832
https://autobuilder.yoctoproject.org/main/builders/nightly-world-lsb/builds/550
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The CMake recipes contain a mismatch between the environmental variable
which defines where the Modules are installed and the location where they
actually are. This patch fixes the environmental variable to point to the
proper folder defined according to the cmake version.
(From OE-Core rev: 642bd49964690259328f506df41a1764c5ac6226)
Signed-off-by: Jose Pardeiro <jpardeiro@rapyuta-robotics.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously when USERADD_ERROR_DYNAMIC was set to "1", an exception was
raised if no numeric UID/GID could be determined for a user/group. Now
it is possible to set it to either "error", which results in the old
behavior, or "warn" in which case a warning is issued instead.
For backwards compatibility reasons, it is still possible to set
USERADD_ERROR_DYNAMIC to "1" and get an exception in case of failure.
(From OE-Core rev: 58c82f79efee8e68fa63b96a32f54660afb15769)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A regression was introduced with commit 3149319a whereby setting
USERADD_ERROR_DYNAMIC no longer resulted in an error for users and
groups that were missing numeric UIDs and GIDs but were not mentioned
at all in any passwd or groups file.
[YOCTO #9777]
(From OE-Core rev: adc0f830a695c417b4d282fa580c5231e1f0afbe)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable the perforce fetcher to call bb.fetch2.get_srcrev() as it can use
'SRCREV = "${AUTOREV}"'.
(From OE-Core rev: 9d6ac71e4d954d857ecb1708ab4fe4bc552244aa)
Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
dpkg-build needs to be executed in the root of the package, so save and restore
the current directory so this task doesn't modify the state.
(From OE-Core rev: c294f4ed5a02b055916cfc26a2fca672edee1208)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
opkg-build needs to be executed in the root of the package, so save and restore
the current directory so this task doesn't modify the state.
(From OE-Core rev: 43dac97f397143abf61fc1c105ea0e4f2fffb90b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This function uses chdir() heavily, so save and restore the cwd so that it
doesn't affect the system state.
(From OE-Core rev: d3059e5d35dcb01641e828c5182615b8fbf1f2e5)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_compile_kernelmodules was assuming that the current directory was ${B} but
didn't make that explicit, so use an absolute path to ensure this always works.
(From OE-Core rev: a26ec548aabda74acfdd1e2893b98b47bc513b15)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There's no need to chdir() when creating image symlinks, and using chdir()
changes the state for future tasks.
(From OE-Core rev: 2fdf06fbe986d742f6bb13e9348b50e9aab03139)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Hard links can still fail even if st_dev is the same for source
and destination. In case of EXDEV error, fall back to copying.
(From OE-Core rev: c00423d6bab9849e331beadf4d3cee90e04fe295)
Signed-off-by: Manuel Huber <manuel.h87@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As rm_work is just cleanup it shouldn't starve more important tasks such as
do_compile of I/O, so use BB_TASK_IONICE_LEVEL to run the task in the idle
scheduler class.
(From OE-Core rev: 6025a14dbbd09b2805fe2e17ddc24f2a515cb832)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This class exists purely to add a number of SDL dependencies, which should be
done directly in the recipe.
(From OE-Core rev: b2a75aad679fd97ff2b51a7a8ee03bd22be8d7a7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When sysvinit is not in use, update-rd.d class adds build dependencies
that won't be needed, this patch removes the build dependecies and
won't add the task to PACKAGESPLITFUNCS.
[YOCTO #9515]
(From OE-Core rev: 5b2139a79cd8c280e755923016b3a6e84413184e)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Do exact match for rootfs type, instead of pattern match, to avoid
unexpected build error due to redundant rootfs type build.
E.g. when building ext2.gz.u-boot, both .gz.u-boot and .u-boot are matched,
the following build error will appear, actually .u-boot is not needed.
| mkimage: Can't open .../core-image-minimal-<machine>-<yyyymmddhhmmss>.rootfs.ext2.gz: No such file or directory
(From OE-Core rev: 46bc438374de74af76d288520c6252c9b7840767)
Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Stephano Cetola
Joshua Lock
Ross Burton
Robert Yang
Ed Bartosh
Christopher Larson
Elliot Smith
George McCollister
Khem Raj
Paul Eggleton
Ricardo Neri
André Draszik
Alexander Kanavin
Ting Liu
Saul Wold
Richard Purdie
Jose Pardeiro
Peter Kjellerstedt
Andrew Bradford
Manuel Huber
Mariano Lopez
Zhenhua Luo