| Age | Commit message (Collapse) | Author |
|---|
|
Improve binary reproducibility of RPM packages.
Ensure timestamps in RPM packages are not later than the value
of SOURCE_DATE_EPOCH. If SOURCE_DATE_EPOCH is not set,
timestamps are not clamped.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Filter out any file dependencies on absolute paths and any
dependencies on Perl modules for nativesdk packages. It is assumed
that they will be provided by the native host if needed, and they mess
up the dependency handling if they are present.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As we're not using them and they're getting in the way of
reproducibility.
[YOCTO #11718]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
RPM's default is single-threaded gz; the change greatly helps with
both buildtimes (when there is a small number of large-sized packages)
and disk space taken by resulting rpms.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is needed for packages like linux-firmware which have a
legitimate reason for it. Oe-core has a separate package_qa
test for this situation, so any accidental inclusions of such
binaries will still be caught.
[YOCTO #11329]
Signed-off-by: Ng Wei Tee <wei.tee.ng@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This filter was add to make compilence with debian packaging but in
package_deb.bbclass is allowed to have the same values in Conflicts and
Provides.
With this filtering errors in recipe meta-data are hidden and could end
on install two packages that conflicts [2].
Reviewing the RPM spec from Fedora doesn't have anything that denies to
use the both Conflicts and Provides with the same value [3], also in
debian manual section 7.6.2 of [4] this behaviour is allowed to force
the removal of the conflicted package and RPM is compilence with this
behaviour after remove the filtering this is seen [5].
[1]
http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=4b611b66743a5ec220aef34d796af63029bb5fd9
[2] https://bugzilla.yoctoproject.org/show_bug.cgi?id=9349#c9
[3]
https://docs.fedoraproject.org/en-US/Fedora_Draft_Documentation/0.1/html/RPM_Guide/ch-advanced-packaging.html
[4] https://www.debian.org/doc/debian-policy/ch-relationships.html
[5] https://bugzilla.yoctoproject.org/show_bug.cgi?id=9349#c12
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
not add multilib prefix to package arch
This is done for reasons I cannot establish, and greatly complicates the code
that installs packages into rootfs.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Packages need to contain just one value for the os field, otherwise
rpm will refuse to install them if they don't match what is in
/etc/rpm/platform.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
nativesdk-* rpm packages all require /bin/sh because postinst scriptlets
are run with it. We can either teach rpm4 and dnf to ignore that dependency
(a lot of non-upstreamable work), or add auto-satisfy the dependency
in each package. I've chosen to do the latter.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
This is the ${W}/package directory which may be reused in subsequent builds.
Also clean up various default directories rpm 4 creates.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
It's handled by the rpm wrapper command, created in rpm recipe.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Previously they were swapped, not sure why. Their meaning, as far as rpm
world goes, is different:
- Recommends is a soft dependency and will be installed by default; there is
an option not to do that.
- Suggests is a suggestion to be picked up and presented to end user by
package management tools; it has no special meaning otherwise.
OE packages use RRECOMMENDS, which should be mapped to Recommends rpm tag,
so that the packages will be picked up as dependencies.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
instead of "all"
Too many places in dnf/rpm4 stack make that assumption; let's not fight against it.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Now that the datastore works dynamically we don't need the update_data calls
so we can just remove them. They're not actually done anything at all for
a while.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The exception handling in this function seemed mildly crazy. Python will
given perfectly good or in several cases better information if we let its
standard traceback/exception handling happen. Remove the pointless code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a new variable to allow markup of postinstall (and preinst)
script dependnecies on native/cross tools.
If your postinstall can execute at rootfs creation time rather than on
target but depends on a native tool in order to execute, you need to
list that tool in PACKAGE_WRITE_DEPENDS.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When constructing a spec file we list files and directory paths in the
%files section. If ] or [ characters are in a file or directory name,
rpm treats them as wildcards which will mean it won't properly match the
filename. Instead, transform these into an ? wildcard so they don't
cause a problem.
(This fixes packaging the npm package "file-set" and anything that
happens to depend upon it, since it includes tests with files that
contain unusual characters including ] and [).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
getVarFlag() now defaults to expanding by default, thus remove the
True option from getVarFlag() calls with a regex search and
replace.
Search made with the following regex:
getVarFlag ?\(( ?[^,()]*, ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The syntax for octal values changed in python3, adapt to it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This doesn't cause any issues right now but it make sense to standardise
on consistently using strings in the data store.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch adds a new bbclass for generating rpm packages that are
signed with a user defined key. The packages are signed as part of the
"package_write_rpm" task.
In order to enable the feature you need to
1. 'INHERIT += " sign_rpm"' in bitbake config (e.g. local or
distro)
2. Create a file that contains the passphrase to your gpg secret key
3. 'RPM_GPG_PASSPHRASE_FILE = "<path_to_file>" in bitbake config,
pointing to the passphrase file created in 2.
4. Define GPG key name to use by either defining
'RPM_GPG_NAME = "<key_id>" in bitbake config OR by defining
%_gpg_name <key_id> in your ~/.oerpmmacros file
5. 'RPM_GPG_PUBKEY = "<path_to_pubkey>" in bitbake config pointing to
the public key (in "armor" format)
The user may optionally define "GPG_BIN" variable in the bitbake
configuration in order to specify a specific gpg binary/wrapper to use.
The sign_rpm.bbclass implements a simple scenario of locally signing the
packages. It could be replaced by a more advanced class that would
utilize a separate signing server for signing the packages, for example.
[YOCTO #8134]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes to OVERRIDES (e.g. from changing MACHINE) should not change
the sstate signatures of do_package_write_*. Exclude the variable
explicitly in the package classes to avoid this.
(From OE-Core rev: 5826a9260138c437f87ba1a9f84d5c08442b997d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The rpm process replace all the "%name" in the spec file by the name of
the package. So, if the package is composed of some files or directories
named "%name...", the rpm package process failed.
Replace all "%" present in files or directories names by "%%%%%%%%" to
correctly escape "%" due to the number of times that % is treated as an
escape character. Jeff Johnson says this is the Right Thing To Do.
[ YOCTO #5397 ]
Signed-off-by: Sébastien Mennetrier <smennetrier@voxtok.com>
Signed-off-by: Michaël Burtin <mburtin@voxtok.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rather than just use d.getVar(X), use the more explict d.getVar(X, False)
since at some point in the future, having the default of expansion would
be nice. This is the first step towards that.
This patch was mostly made using the command:
sed -e 's:\(getVar([^,()]*\)\s*):\1, False):g' -i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
os.walk() returns symlinks to directories in the "dirs" lists, but then never
enters them by default. As a result, the old code applied neither the
directory handling (because that is active once a directory gets entered) nor
the file handling, and thus never packaged such symlinks.
The fix is simple: find such special directory entries and move them to the
"files" list. However, one has to be careful about the undefined behavior of
modifying a list while iterating over it.
This fix was required for packaging a modified base-files that created
symlinks into /usr for /sbin /lib and /sbin.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow globs in CONFFILES.
This patch changes the way of CONFFILES handling. After this change,
the CONFFILES can take the same form as FILES. That means, we don't
have to list a bunch of files for CONFFILES. It will just be expanded
like the FILES variable.
We don't assume default value for CONFFILES in OE. But distro vendors could
provide a default value for CONFFILES in their distro configuration file
like below.
CONFFILES = "${sysconfdir}"
In this way, files under /etc are treated as configuration files by
default. Of course, setting CONFFILES in recipes take precedence over
the CONFFILES. For example, if the recipe author decides that package A
should only treat files under ${sysconfdir}/default/ as config files,
he/she can write like this.
CONFFILES_A = "${sysconfdir}/default"
[YOCTO #5200]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During spec generation, ideally directories should not be auto
packaged under the %file section of rpm packages but take ownership of
specific directories.
* packages only empty directories or explict directory.
See:
- http://www.rpm.org/max-rpm/s1-rpm-inside-files-list-directives.html
- "The %dir Directive"
* This will prevent the overlapping of security permission.
For example, in Tizen the directory /etc have smack label 'System::Shared'
So Only one package should own and set the label of /etc to prevent
the overwriting of the smack label.
Existing behaviour is maintained if DIRFILES is not set. If it is set,
the modified behaviour is used. If can be set to an empty value by
core recipes to trigger the modified behaviour.
[RP: Modified to allow optional usage of DIRFILES]
Signed-off-by: Ronan Le Martret <ronan@fridu.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows its usage in other RPM macros so files in ${S} can be found.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add hooks to allow customisation of the rpm spec files. Since python functions
aren't visible in the data store, one variable is used to trigger the call to
a separately named function. A dummy function is not provided since this then
triggers various class ordering complexities which are best avoided.
Ultimately this will be replaced by a refactor of the code to generate the
spec file using a python class.
This allows the tizen layer to add hooks for the security manifests for
example.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When building target packages, HOST_OS and TARGET_OS are the same, as is the
VENDOR field. However, when building an SDK this is not true. The patch
corrects the oversight and switches to using the 'HOST' version and resolves
the issue of meta-mingw not working w/ the rpm packaging.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The meta-mingw layer attempts to change the SDK Suffix, but the rpm
packaging had a hard coded reference to _nativesdk.
I did a quick scan for other hard coded entries and did not fine any
more.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The package_write task was previously removed. Remove a remaining superfluous
reference to it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The archiver.bbclass will put the sources to ARCHIVER_OUTDIR according
to configuration, then the rpmbuild -bs will create the srpm.
[YOCTO #4986]
[YOCTO #5113]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
The reasons this task was introduced are lost in the mists of time. It
allowed for the a single "package_write" task instead of spelling out
the explicit package backends, however in all but one case we do that
anyway.
As such as might as well give in and delete the task, converting that
single reference into explicit dependencies.
This gives bitbake a bit less work to to when processing the runqueue
since there are less tasks (but more dependencies in some cases).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Package indexing is done in python and package-index.bb uses the new
routines.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The default value for HOMEPAGE of "unknown" has been in place since the
early OE-Classic days, but it doesn't really make sense - "unknown" is
not a valid URL and it just means we have to explicitly check for this
hardcoded string if we're displaying the value in some form of UI, such
as Toaster.
This has required some changes to the packaging classes as they
previously did not expect the value to be blank.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This commit cleans up the functions that were ported to python.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
This causes issues when postinstalls have ERROR keywords
its interpreted as error and image build is cancelled
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Additional metadata from user-defined variable is written into
control/spec file of binary package.
Three variables are searched for adiitional package metadata:
* PACKAGE_ADD_METADATA_<PKGTYPE>_<PN>
* PACKAGE_ADD_METADATA_<PKGTYPE>
* PACKAGE_ADD_METADATA
First found variable with defined value wins.
<PN> is a package name. <PKGTYPE> is a distinct name of specific
package type:
* IPK for .ipk packages
* DEB for .deb packages
* RPM for .rpm packages
Variable can contain multiple [one-line] metadata fields separated by
literal sequence '\n'. Separator can be redefined through variable flag
'separator'. In package control/spec file separator is replaced by
newline character.
Signed-off-by: Leonid Borisenko <ive.found@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We have the odd situation where the CONTROL/DEBIAN directory can be removed
in the middle of the walk, the isdir() test would then fail and the walk code
would assume its a file hence we check for the names in files too.
This resolves the autobuilder failure:
error: File not found: /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-fsl-arm/build/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/xinit/1_1.3.3-r0/package/DEBIAN
RPM build errors:
File not found: /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-fsl-arm/build/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/xinit/1_1.3.3-r0/package/DEBIAN
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When originally developed, it was thought a task may have more than one associated
sstate archive. The way the code has grown that idea is now not possible or needed.
We can therefore assume one sstate archive per task and drop the crazy name
mapping code. Simpler is better in this case.
The downside is that various sstate archives will change name so this forces a cache
rebuild. Given the other sstate changes going in at this time, this isn't really
a bad thing as things would rebuild anyway.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On a multilib system when one of the multibs has a different OS then
other multilibs a failure can occur during the install process because
RPM assumes all systems have the same OS.
When an n32 platform is selected as an alternative multilib, it shows
up as mips64_n32-.*-linux-gnun32 in /etc/rpm/platform. This causes
problems when the smart tool tries to add a channel for the multilib.
RPM archScore call always returns zero for arch "mips64_n32" -
after appending default vendor and os, it finds "mips64_n32-wrs-linux"
doesn't match any predefined platforms. Fix this by removing the
restriction of -gnun32 suffix in platform file.
Signed-off-by: Lei Liu <lei.liu2@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently if multiple package tasks are running against a recipe, package_rpm
is restricted to the slowest speed of them due to the locking. This patch
explicitly ignores the opkg/debian artefacts and hence allows a speedup.
It also removes an issue were a Ctrl+C interrupting a deb.ipk packaging task
would end up with CONTROL/DEBIAN files in the spec file resulting in a build
failure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The postinst files were being generated using purely the name of the package,
this unfortunately meant the run order would be based on the name of the
package and not the order in which it was installed on the filesystem.
If package A requires package Z to be fully installed, this causes a problem.
Note:
rpm - as the rpm based install proceeds the order is defined and captured.
so the problem is resolved there.
ipk - this unfortunately does not appear to solve the problem for ipk, as
the status file is not ordered in any appreciable way. This does not
cause any regressions however and sets the stage for a proper fix.
deb - this -may- fix the deb install. Early testing indicates at least some
ordering to the status file. But it's unclear if it completely resolves
the issue.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #5313]
When performing an attemptonly install, we should skip an errors and
continue to install everything else. However, there is a case where two
packages can conflict, and cause a hard failure.
This workaround, ignores this and allows the image to be constructed.
Note: Some items in the failed transaction may not get installed.
To fix this properly we need to find the issue in smart, and make it ignore
or at least attempt to resolve these kinds of conflicts.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The function that "bitbake package-index" relies upon when using the RPM
package backend (package_update_index_rpm()) uses MULTILIB_PREFIX_LIST
to get the list of package architectures to be indexed, but that
variable is only set when populate_sdk_rpm or rootfs_rpm are inherited,
which is not the case for the package-index recipe. Until we're able to
refactor this properly, for minimal impact just use the value of
ALL_MULTILIB_PACKAGE_ARCHS if MULTILIB_PREFIX_LIST does not give us any
architectures (the equivalent function in the ipk backend uses the
former variable).
Having "bitbake package-index" working is important because it's the
only practical way of indexing RPM packages for use as a feed; host
versions of createrepo won't work properly because they won't support
indexing recommends relationships.
Stopgap fix for [YOCTO #5278].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Juro Bystricky
Peter Kjellerstedt
Alexander Kanavin
Ng Wei Tee
Aníbal Limón
Richard Purdie
Paul Eggleton
Joshua Lock
Ulf Magnusson
Markus Lehtonen
Sébastien Mennetrier
Patrick Ohly
Chen Qi
Ronan Le Martret
Mark Hatle
Robert Yang
Laurentiu Palcu
Hongxu Jia
Khem Raj
Leonid Borisenko
Lei Liu