| Age | Commit message (Collapse) | Author |
|---|
|
When working on the yocto-bsp and kernel-lab update for yocto 1.2
we found it was impossible for a end-user BSP to isolate patches
on a branch, since with the following commit:
[kernel-yocto: enforce SRC_URI specified branch]
Any new branch would be switched to whatever was specified on the
SRC_URI and undoing the work that the yocto-bsp tool did to support
board specific patches.
To fix this, we'll keep the enforcing of branch consistency enabled
by default, but introduce a variable "KMETA_AUDIT" that when not
set will skip the check.
There's no impact for existing users, and it is only something that
other plumbing commands and tools will need to use (or care about).
[YOCTO: #9120]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
During the simplication and cleanup of branches and kernel meta data
handling, the ability to force build a branch that didn't match the
meta data was dropped.
There are valid uses cases when a different branch should be built
(testing, development, etc), so we restore the capability with this
change.
If after the kernel meta data is processed the current branch does
not match the SRC_URI specified branch, a warning is generated
about the impending branch switch and that the user should double
check that they are building what they expect.
WARNING: After meta data application, the kernel tree branch is standard/base. The
WARNING: SRC_URI specified branch standard/gt. The branch will be forced to standard/gt,
WARNING: but this means the board meta data (.scc files) do not match the SRC_URI specification.
WARNING: The meta data and branch standard/gt should be inspected to ensure the proper
WARNING: kernel is being built.
Reported-by: Steve Sakoman" <steve.sakoman@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move do_kernel_link_vmlinux() from kernel-yocto.bbclass into
kernel.bbclass so that it's available to any kernel recipe.
Note that the task is not enabled by default in kernel-yocto.bbclass,
so don't enable by default in kernel.bbclass either. To enable, see
the example in linux-yocto.inc, ie:
addtask kernel_link_vmlinux after do_compile before do_install
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The do_kernel_link_vmlinux() task modifies the build directory (not
the source tree) and should not be skipped when externalsrc is being
used.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The existing code doesn't tell regular (with .git) and bare cases and
just move the unpacked repo to the place of kernel source. But later
steps will fail on a bare-cloned repo because we can not checkout
directly in a bare cloned repo.
This change performs another clone to fix the issue.
Note: This change doesn't cover the case that S and WORKDIR are same
and the repo is bare cloned.
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Before the fetcher validated the specified SRCREV was reachable on a
specified branch, linux-yocto style kernel's were comparing the value
of KBRANCH and branch on the SRC_URI and then allowing a SRC_URI
specified branch to override KBRANCH.
With the introduction of kernel meta data on the SRC_URI, this routine
is incorrectly picking up a kernel-cache repository and then attempting
to apply that branch information to the kernel repository.
The rationalization of the branch specification is largely no longer
required, and will may be removed in the future. But for now, to keep
changes minimal, we can simply not return branch information that comes
from kernel meta data by checking the 'type' parameter and skipping
if it is of type 'kmeta'.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make sure that 'do_unpack' is executed before 'do_kernel_metadata'.
Enabling externalsrc for kernel disables 'do_validate_branches' task
which caused 'do_kernel_metadata' to fail as the dependency chain to
'do_unpack' got broken.
[YOCTO #6658]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The linux-yocto tree has always been a combined set of kernel changes
and configuration (meta) data carried in a single tree. While this
format is effective at keeping kernel configuration and source
modifications synchronized, it isn't always obvious to developers on
how to manipulate the meta data versus the source.
With this change, we remove the meta data processing from the
kernel-yocto class and use the external meta-data repository that
has always been used to seed the linux-yocto meta branch.
After this change, linux-yocto can no longer process combined trees,
and is simplified as a result.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Change calls to bbfatal() to either die() or bbfatal_log() where we know
we want the full log to be printed by the UI (calling bberror or bbfatal
would otherwise suppress it since the change to connect these functions
through to the UI.) bbfatal() is still fine to use where there is enough
context information in the message such that the log isn't needed.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
do_patch is currently doing checks with machine_srcrev without initiate
it which leads to below (additional debug added):
DEBUG: Executing shell function do_patch
.
.
.
+ [ 0 -ne 0 ]
+ [ != AUTOINC ]
+ git rev-parse --verify ~0
fatal: Needed a single revision
+ git merge-base HEAD
usage: git merge-base [-a|--all] <commit> <commit>...
or: git merge-base [-a|--all] --octopus <commit>...
or: git merge-base --independent <commit>...
or: git merge-base --is-ancestor <commit> <commit>
or: git merge-base --fork-point <ref> [<commit>]
-a, --all output all common ancestors
--octopus find ancestors for a single n-way merge
--independent list revs not reachable from others
--is-ancestor is the first one ancestor of the other?
--fork-point find where <commit> forked from reflog of <ref>
+ [ = ]
+ set +x
DEBUG: Shell function do_patch finished
Only reason it works today is because 'rev-parse/merge-base' with empty machine_srcrev
will result in "false positive". Solve this by adding a similar non-empty check and
use SRCREV as fallback as in 'do_kernel_metadata'
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When a patch fails to apply, the kernel-yocto bbclass attempted to
be helpful and suggest that devshell be used to fix the issue.
The only problem is that you can't get to devshell if a patch is
failing.
We drop this bad advise and instead point to the linux source directory.
[YOCTO: #6202]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
As reported by Steffen Pankratz <Steffen.Pankratz@elektrobit.com>, the
previous logic of KBUILD_DEFCONFIG processing would not propagate an in
tree defcofig to WORKDIR if one was not already present.
We fix the propagation by copying the in tee config if a defconfig is
not already in WORKDIR.
Additionally we only warn (versus copying) if an in tree configuration
is specified, is different than the WORKDIR version and isn't copied.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are two tasks that must run before a linux-yocto kernel is built.
- Kernel checkout and relocation to work-shared (kernel_checkout)
- Meta data gathering and configuration prep (kernel_metadata)
The current task definitions for both are simply "before do_patch",
which is correct, but kernel_checkout must run before and not race with
kernel_metadata.
So we set the definition of kernel_checkout to be more specific and
enforce the proper ordering.
[YOCTO: #7731]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The kernel_configme task was added twice (once in the .bbclass, one in a .inc)
with different ordering constraints.
Change this to be just one definition in the bbclass with the stronger ordering
constraints.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The autobuilder failed like this:
temp/run.do_kernel_metadata.25242: line 165: createme: command not found
createme is provided by kern-tools-native. do_patch has a dependency on
kern-tools-native, but do_kernel_metadata runs before do_patch. So move the
dependency from do_patch to do_kernel_metadata, moving the statement from the
.inc to the class so it's alongside the task definition.
[ YOCTO #7531 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In a similar manner to the kernel itself, which does the following to
bring a defconfig into the configuration:
defconfig: $(obj)/conf
ifeq ($(KBUILD_DEFCONFIG),)
$< --defconfig $(Kconfig)
else
@echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
endif
We do the same with the linux-yocto configuration processing. If a
defconfig is specified via the KBUILD_DEFCONFIG variable, we copy it
from the source tree, into a common location and normalized "defconfig"
name, where the rest of the process will include and incorporate it
into the configuration process.
If the fetcher has already placed a defconfig in WORKDIR (from the
SRC_URI), we don't overwrite it, but instead warn the user that SRC_URI
defconfigs take precedence.
[YOCTO: #7474]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The linux-yocto kernel has a meta-data component which accompanies the
actual tree. That meta-data is processed to generate a series file that
controls the patching and configuration of the kernel.
patching and configuration are two distinct phases, so when working on
kernel configuration, it doesn't make sense to always have to re-run
the patching step just to update configuration data in the meta-series.
To allow a more granular set of tasks, we break the meta-data generation
into a separate task, which runs before do_patch. This allows the task
to be explicitly called when working on configuration, but otherwise
has no impact on the build.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
We don't require that a yocto custom kernel + defconfig have a full BSP
description (but of course it would be better if they did). Since this
isn't a requirement, we shouldn't alarm users by generating a BSP
description warning.
To implement this, we add a bsp audit level flag (like the one that
exists for kconfig audits), and only set it to activate in the versioned
linux-yocto recipes.
[YOCTO: #7370]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Add do_shared_workdir which was added recently
* Add do_fetch and do_unpack to this list, because at the moment if you
enable externalsrc through a bbappend the += in this class wipes out
the original value from externalsrc (which is set with ?=)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The meta data (in tree or out of tree) that describes a BSP, its patches
and configuration is not always available when a new/default or manually
configured machine is built.
When this happens, the tools generate a skeleton BSP and use a
architecture defconfig for the build. If this is by design, the build
is typically sane and everything works fine. If an existing BSP
description was expected, chances are that the resulting kernel will not
be correct.
To avoid surprising the user when a default/skeleton BSP is used for the
build, we can make it obvious to the user by emitting a warning like
the following:
WARNING: [kernel]: An auto generated BSP description was used, this normally indicates a misconfiguration.
Check that your machine (myqemux86-64) has an associated kernel description.
[YOCTO: #3383]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
After a linux-yocto style kernel is configured, a kernel configuration
audit is executed to detect common errors or issues with the config.
This output used to be visible, but was made less obvious to not alarm
users unnecessarily (since some configuration issues are acceptable).
There are some classes of configuration issue that are worth being
visible, and that is specified configuration values that do not make the
final .config. These dropped options can result in any number of runtime
failures, so flagging them at build time makes sense.
The visibility of auditing is controlled by KCONF_AUDIT_LEVEL:
0: no reporting
1: report options that are specified, but not in the final config
2: report options that are not hardware related, but set by a BSP
The default level is 1, with level 2 and above being for BSP development
only.
If these conditions are detected, warnings will be generated as follows:
WARNING: [kernel config]: specified values did not make it into the
kernel's final configuration:
Value requested for CONFIG_SND_PCSP not in final ".config"
Requested value: "CONFIG_SND_PCSP=y"
Actual value set: ""
or
WARNING: [kernel config]: BSP specified non-hw configuration:
CONFIG_BLOCK
CONFIG_CFG80211_WEXT
CONFIG_CORDIC
CONFIG_CRC8
CONFIG_EFIVAR_FS
CONFIG_EFI_PARTITION
CONFIG_NET
CONFIG_NETDEVICES
CONFIG_PARTITION_ADVANCED
CONFIG_WEXT_CORE
CONFIG_WEXT_PROC
CONFIG_WIRELESS
At this point thse are only a warnings, since there needs to be time for
layers and configuration fragments to be validated against this new
check.
[YOCTO: #6943]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
--047d7b3a7fac0eebee050cb47483
Content-Type: text/plain; charset="UTF-8"
After we check the existence of 'machine_branch' with 'git show-ref'
the following if statement should change the 'machine_branch'
to the default (i.e. master) if the 'git show-ref' has returned an
exit code that is not 0, not the other way around.
Signed-off-by: Theodor Gherzan <theodor@resin.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
guilt is no longer used to manage linux-yocto kernel pathes, so
we no longer need to export variables that it needed to locate
patches in the tree.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commit 92c1ece6c347030d48995a36f4c67861356e59d3 causes the test in do_patch()
in kernel-yocto.bbclass to fail if ${machine_srcrev} is an annotated tag. The
check is meant to ensure that ${machine_srcrev} is an ancestor of HEAD, but
if ${machine_srcrev} is a tag, then "$(git rev-parse --verify
${machine_srcrev})" evaluates to the SHA of the tag instead of what it's
pointing to.
Replacing "$(git rev-parse --verify ${machine_srcrev})" with "$(git rev-parse
--verify ${machine_srcrev}~0)" fixed the problem by finding the object pointed
to by the tag, and not the tag itself. This also works for commit IDs that
are not tags, hence is safe in a scenarios.
Jeff Wang <jeffrey.wang@ll.mit.edu>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
The ability to build non-git repositories was broken by two changes:
- The existence of an empty 'patches' directory created during the
unpack phase. This dir was incorrectly identified as a valid meta
directory and broke the build. By ensuring that it is removed before
creating the empty repository, it will no longer be found instead of
the real meta directory.
- The attempt to reset the git repository to a specific SRCREV when
no SRCREV was provided. By checking for a SRCREV of 'INVALID', we
avoid any processing and failed git operations.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
In 1.8 we want to streamline the kernel build process. Basically we
currently have multiple copies of the kernel source floating around
and the copying/compression/decompression is painful.
Lets assume we have a kernel source per machine since in most cases
this is true (and we have a sysroot per machine anyway). Basically,
instead of extracting a source into WORKDIR, then copying to a sysroot,
we now set S to point straight at STAGING_DIR_KERNEL.
Anything using kernel source can then just point at it and use:
do_configure[depends] += "virtual/kernel:do_patch"
to depend on the kernel source being present. Note this is different
behaviour to DEPENDS += "virtual/kernel" which equates to
do_configure[depends] += "virtual/kernel:do_populate_sysroot".
Once we do this, we no longer need the copy operation in
do_populate_sysroot, in fact there is nothing to do there (yay).
The remaining part of the challenge is to kill off the horrible
do_install. This patch splits it off to a different class, the idea here
is to have a separate recipe which depends on the virtual/kernel:do_patch
and just installs and packages the source needed to build modules on
target into a specific package.
Right now this code is proof of concept. It builds kernels and kernel
modules. perf blows up in do_package with issues on finding the kernel
version which can probably be fixed by adding back the right bit of do_install,
and adding a dependency of do_package[depends] += "virtual/kernel:do_install"
to perf. The whole thing needs a good write up, the corner cases testing
and probably a good dose of cleanup to the remaining code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Spaces aren't valid around = in an assignment statement (not even with
bash).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The simplication of do_validate_branches missed a case where a custom
kernel can supply SRCREV="${AUTOREV}", and not use SRCREV_machine at all.
In this case, we will incorrectly try and test the tree for a non-existent
commit, and break the build.
By simplying the condition of the check to look for an empty SRCREV_machine,
we can skip manipulating the tree and testing for a SRCREV.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A warning is issued when run about an unexpected operator due to a
syntax error with an extra if empedded in the shell conditional. Remove
the extra if.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
--is-ancestor is a relatively new git option [commit 5907cda1, Aug 30 2012].
To support build machines with older versions of git installed, we can use
the basic porcelain commands to acheive the same check.
merge-base: "--is-ancestor A B" can be replaced with:
if test "$(git rev-parse --verify A)" = "$(git merge-base A B)"
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the bbinfo, bberror, bbfatal equivalents to the existing echo statements
within the kernel-yocto processing. This makes us consistent with the other
messages from the build system.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
When custom respositories are built (like a pure kernel.org
repo), the machine_meta SRCREV format is not applicable. As
such, we shouldn't check for the meta branch and we shouldn't
only check SRCREV_machine based revisions.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Since the git fetcher ensures that branches exist, we no longer need to
validate the branch and have a conditional checkout of the source.
We can remove some checks and ensure that whenever we exit the
do_kernel_checkout routine that a branch is always checked out.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
It's better to check a branches existence via show-ref versus the end
user branch commands. So we make the switch.
Also as part of this change, we move the conversion of remote branches
to local branches above the meta branch checking. This is required to
ensure that the branch is local for the show-ref check.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
The checking of machine and meta branch SRCREVs was inconsistent and
didn't allow a mixed AUTOREV machine/meta branch combination. By
simplifying the checks and changing the logic, we can now allow this
combination.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
KBRANCH_DEFAULT was introduced as a way to trigger the enforced build
of a particular branch of the tree. With the fetcher now enforcing
SRCREVs existing on a branch, we can simply validate that the SRCREV
is reachable from the final branch and no longer care about enforcing
a given branch.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Now that the fetcher will enforce branch existence, we no longer need to
confirm that a branch exists, and that it was the branch requested to
be built.
We know the branch exists and we'll confirm that the specified SRCREV
is going to be built after we've patched the tree.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
We no longer need to check if the KBRANCH matches the branch specified
in the SRC_URI. This is taken care of by the fetcher at the beginning
and SRCREV ancestor validation after patching.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
The bitbake fetcher now enforces that a commit is contained by a branch,
so this code can be dropped from do_validate_branches.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Rather than attempting to condition the entire tree to machine SRCREV (since
we don't know what branch will be built), we can instead wait until patching
has completed and then confirm that we are indeed building a decendant of the
specified SRCREV. The result is a much simpler check, and no mangling of the
tree.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Parsing the output of git show is error prone, since it changes based on
the type of issue with bad comit IDs. Since the output is no longer used
in the case of a valid ref, we can switch to git-cat-file and simply
check the return code.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
do_validate_branches checks to ensure that a valid machine SRCREV was
set. A test against an empty SRCREV is done in two separate locations,
we only need one, since the first check immediately returns and the
second check never hits.
At the same time, we can stop referring to the same commit hash by
3 different names. Instead we assign to a local variable at the
top of the routine, and refer to it at all times.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
We allow inheriting recipes to control the kconfig mode used by merge_config.sh
via the KCONFIG_MODE variable. An error crept into the variable reference, and
since it is not quoted, the true condition always runs.
The result is that operations without an explicit kconfig mode cannot trigger
allnoconfig for defconfig builds, which can result in some options being
dropped from the final .config.
Quoting the reference allows it to evaluate properly.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The dependency to CCACHE_DIR was moved to ccache.bbclass in
commit 2acf8da4f13c175ea818b9514677b7059de1e3e2:
[ ccache: Separate out into its own class ]
then the '=' should be replaced by '+=', otherwise, it will overwrite
the original ${CCACHE_DIR} in dirs.
Signen-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bbclass did the following:
do_diffconfig[depends] += "virtual/kernel:do_kernel_configme"
This clearly introduces a cross-kernel task dependency if the recipe
inheriting this class isn't the preferred provider of virtual/kernel, which is
obviously wrong, but further, will break the build if a kernel-yocto based
kernel is parsed and not skipped, but virtual/kernel refers to
a non-kernel-yocto recipe, which would not have the do_kernel_configme task.
Work around this by adding the in-recipe task dep programmatically with
bb.build.addtask when do_diffconfig exists.
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
'git branch' may use ANSI escape codes in its output (to provide colour)
which doesn't play well with commands expecting pure plain text, e.g.
fatal: '^[[31mmaster^[[m' is not a valid branch name.
Use the --no-color option to ensure all branch names are plain text.
Cc: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The validate_branches routine is responsible for ensuring that the specified
SRCREV exists, and that the tree has been prepared for eventual patching
starting directly from that SRCREV.
On exit, the routine checks out the specified machine branch and the
preparation is complete .. except if a KMETA branch isn't used, we exit
early since the branch can't be validated.
To make the exit condition consistent for all cases, we can move the
KMETA validation inside a conditional and allow the same exit path for
both cases.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Instead of using 'diff' command between two kernel config files,
the task diffconfig does the job creating the file
$WORKDIR/fragment.cfg that user should review and use.
[YOCTO #3862]
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While non-git kernel repos are not the preferred format for a kernel upstream,
they are supported. Depending on the creator of the archive the expanded
source directory name varies. If the recipe for the kernel doesn't properly
set S to the right value, a cryptic git error message is produced. We can
detect the situation and offer some advice on how to fix the issue.
A second check is also added in this commit for archive based kernel repos
which won't have a SRCREV to validate. If we have no SRCREV or SRCREV is
INVALID, we can exit the branch validation step immediately. This saves yet
another cryptic git error message and simplifies a custom tgz based recipe.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Bruce Ashfield
Andre McCurdy
Jianxun Zhang
Markus Lehtonen
Paul Eggleton
Petter Mabäcker
Ross Burton
Theodor Gherzan
Jeff Wang
Richard Purdie
Darren Hart
Ming Liu
Christopher Larson
Matt Fleming
João Henrique Ferreira de Freitas
Peter Kjellerstedt